r: 02136645 p: 648.487 pid: 95620 b: FLUKE q: 5 st: 1 lt: 1 ean: 0095969586740 sr: FLUKE 3947864 sr_no_br: 3947864 sr_no_br_cl: 3947864 sr_cl: FLUKE3947864 sr_dash: sold: 3242.435 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87-5/E2K True-RMS digital multimeter kit for industrial use - 3947864 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: This new combination kit is based on the Fluke 87V and includes special accessories that allow faults in industrial machines to be located even more efficiently. Accuracy and diagnostic functions for optimal industrial productivity The new Fluke 87 V has improved measurement and troubleshooting functions, higher resolution and greater accuracy for troubleshooting even more faults in motor drives, business automation, power distribution and electromechanical equipment. The 80 Series V shares many similarities with the classic 80 Series, but offers more troubleshooting capabilities, even greater safety, even more ease of use and better protection against impacts. The new 80 Series V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. Key features A unique function for accurate voltage and frequency measurements at variable speed drives and other equipment causing electrical disturbances (87 V). A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (87 V). Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. Thanks to the large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Electrical safety All inputs are protected in accordance with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks associated with current surges and spikes. Accurate measurement of complex signals Until now, there was no multimeter that could accurately measure AC drives. But the new Fluke 87V is specifically designed to handle such complex signals. Imagine the potential productivity gains achieved when troubleshooting drive systems is no longer a matter of guesswork. The measurements are correct every time. A unique feature for accurate measurements of pulse-width modulated AC voltage with noise. Measure accurately at the ASD and motor terminals Measure frequency (motor speed) accurately. The frequency measurement is not affected by the frequency of the ASD carrier Measure the AC current with an optional current clamp Compare the reading of the 87 V with the display on the ASD Special shielding blocks high-frequency noise and voltage generated by large drive systems ds: dsc: Scope of delivery 87 V multimeter TL224 silicone measuring leads AC220 Long Reach crocodile clips TP238 measuring probes magnet and strap 80BK temperature measuring probe holster 9 V battery (fitted) kts: True-RMS digital multimeter kit for industrial use kpn: 87-5/E2K kpn_dash: 87 kpn_clear: 875E2K bkpn: FLUKE 87-5/E2K bkpn_clear: FLUKE 875E2K c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947864 sr_ns: FLUKE3947864
r: 03398802 p: 290.707 pid: 178057 b: FLUKE q: 16 st: 1 lt: 1 ean: 0095969623766 sr: FLUKE 5065866 sr_no_br: 5065866 sr_no_br_cl: 5065866 sr_cl: FLUKE5065866 sr_dash: sold: 3197.777 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 325 True RMS current clamp - 5065866 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 323, 324 and 325, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 325 also offers measurement functions for DC current and frequency. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC and DC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kOhm with loop-through test Temperature and capacitance measurement Frequency measurement ds: dsc: Scope of delivery 325 True-RMS current clamp Measurement leads Carrying case User manual kts: True RMS current clamp kpn: 325 kpn_dash: kpn_clear: 325 bkpn: FLUKE 325 bkpn_clear: FLUKE 325 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5065866 sr_ns: FLUKE5065866
r: 02954128 p: 1587.066 pid: 71468 b: FLUKE q: 0 st: lt: 10 ean: 0095969781817 sr: FLUKE 4604605 sr_no_br: 4604605 sr_no_br_cl: 4604605 sr_cl: FLUKE4604605 sr_dash: sold: 3174.132 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789 process meter with IR 3000 FC connector - 4604605 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: Now compatible with Fluke Connect app The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. This instrument combines the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and Fluke Connect's wireless data logging capabilities with ShareLive video call function (sold separately), process engineers can now do much more while carrying much less. And with the built-in, selectable 250-ohm HART resistor, there's no need to carry a separate resistor either. Features of the Fluke 789 24V loop power supply Very large dual display Improved backlight with 2 brightness settings Max. permissible load resistance 1200 ohms at mA-source Heart mode setting with loop power supply and built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA generation for a quick 'span check' (checking zero and full scale) Externally accessible fuses that are easy to replace Infrared port for processing data in the FlukeView Forms software (V2.1) The Fluke 789 also has the following features of the Fluke 787 Accurate digital True-RMS multimeter, 1000 V, 440 mA DC voltage accuracy of 0.1% DC current measurement with 0.05% accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode and through-bell test Simultaneous display of mA and % scale 20 mA DC current source / loop calibrator / simulator Manual step function (100%, 25%, coarse, fine) plus automatic step and rise functions Externally accessible battery that can be easily replaced Safety standards Meets standards 1000 volts EN61010-1 CAT III and 600 volts EN61010-1 CAT IV. ds: dsc: Scope of delivery Fluke 789 ProcessMeter IR3000 FC connector AC175 alligator clips Four (4) AA 1.5V alkaline batteries (installed) TL71 set of safety measuring leads kts: process meter with IR 3000 FC connector kpn: 789 kpn_dash: kpn_clear: 789 bkpn: FLUKE 789 bkpn_clear: FLUKE 789 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4604605 sr_ns: FLUKE4604605
r: 03045118 p: 630.53 pid: 72391 b: FLUKE q: 0 st: lt: 6 ean: 0095969679329 sr: FLUKE 4370598 sr_no_br: 4370598 sr_no_br_cl: 4370598 sr_cl: FLUKE4370598 sr_dash: sold: 3152.65 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 179 IMSK service kit industrial multimeter - 4370598 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description A True-RMS multimeter equipped with all functions, combined with a rugged, reliable True-RMS current clamp in basic design Ideal for fault finding in electrical and electronic systems Measurements up to 1000 V AC or DC (179 DMM) and up to 400 A AC (323 clamp) This set combines the Fluke 179 True-RMS DMM and the Fluke 323 True RMS current clamp. Both tools are rugged, reliable and accurate, and extremely easy to use. Fluke 179 True-RMS digital multimeter The Fluke 179 is the preferred solution for professional technicians worldwide. This tool includes all the features you need for troubleshooting and repair of electrical and electronic systems Features accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode testing Increases productivity with manual and automatic range setting, display hold, auto hold and min/max recording Built-in thermometer lets you take temperature measurements without having to carry a separate instrument Fluke 323 True-RMS Current Clamp The Fluke 323 current clamp offers True-RMS measurements, optimal ergonomics and a large display for efficient troubleshooting. It can perform in the most demanding environments and delivers noise-free, reliable readings, so you can diagnose problems almost anywhere with confidence. Robust, reliable True RMS current clamp in basic version for measuring current up to 400 A Measures AC current up to 400 A Measures AC voltage and DC voltage up to 600 V Provides True-RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance up to 4 kOhm with throughput detection With safety specification CAT III 600 V, CAT IV 300 V ds: dsc: Scope of delivery Fluke 179 True-RMS digital multimeter Fluke 323 True-RMS current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point Test lead set AC175 Screw-threaded crocodile clips set kts: service kit industrial multimeter kpn: 179 IMSK kpn_dash: kpn_clear: 179IMSK bkpn: FLUKE 179 IMSK bkpn_clear: FLUKE 179IMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4370598 sr_ns: FLUKE4370598
r: 08106976 p: 1049.876 pid: 72792 b: FLUKE q: 0 st: lt: 8 ean: 0195112035719 sr: FLUKE 5317706 sr_no_br: 5317706 sr_no_br_cl: 5317706 sr_cl: FLUKE5317706 sr_dash: sold: 3149.628 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1662 SCH FTT KIT set 1662 multifunction tester with TruTest data management software - 5317706 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Fluke 1662 multifunction tester The Fluke 1662 installation tester offers you Fluke reliability and all the basic testing capabilities you need for everyday installation testing. It tests according to all local regulations and is simple and intuitive to use. Additional useful features, such as on/off automatic start for RCD and loop test and self-test, save time and give you more confidence in your results. Fluke TruTest data management software Fluke TruTest software is designed to eliminate the problems associated with traditional electrical system data management and reporting. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement tools from Fluke and Beha-Amprobe. The TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. ds: dsc: Scope of delivery 1662 multifunctional installation tester 6x AA batteries (IEC LR6) C1600 carrying case Zeroing function Heavy-duty power cord STD standard test lead set Padded carrying and waist strap Quick guide TP165X probe with remote control and cable IR189USB cable TruTest data management software kts: set 1662 multifunction tester with TruTest data management software kpn: 1662 SCH FTT KIT kpn_dash: kpn_clear: 1662SCHFTTKIT bkpn: FLUKE 1662 SCH FTT KIT bkpn_clear: FLUKE 1662SCHFTTKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5317706 sr_ns: FLUKE5317706
r: 02958466 p: 1556.593 pid: 71456 b: FLUKE q: 0 st: lt: 15 ean: 0095969686402 sr: FLUKE 4387857 sr_no_br: 4387857 sr_no_br_cl: 4387857 sr_cl: FLUKE4387857 sr_dash: sold: 3113.186 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 712B/EN RTD temperature calibrator - 4387857 cn: TEMPERATURE CALIBRATOR cn2: TEMPERATURE CALIBRATOR cn_clear: TEMPERATURECALIBRATOR d: Product description: For the temperature calibration professional who wants a highly accurate, easy-to-use, single-function RTD temperature calibrator, the Fluke 712B is the ideal test instrument. Key features The 712B RTD calibrator can measure and simulate the resistance of (13) different types of RTD?s. Measure signals from 4 to 20 mA and generate a temperature signal at the same time Integrally designed suspension system included with each instrument Configurable 0% and 100% source settings for quick linearity checks in 25% increments Linear rise function and automatic rise function in 25% increments based on 0% and 100% settings Two inputs and backlit display for easy interpretation of measured values Switch-off settings are remembered at switch-on for quick restart of tests 1-year and 2-year specifications plus traceable calibration certificate ds: dsc: Scope of delivery Fluke 712B temperature calibrator Magnetic suspension system Batteries Manual Traceable calibration certificate Measurement leads kts: RTD temperature calibrator kpn: 712B/EN kpn_dash: kpn_clear: 712BEN bkpn: FLUKE 712B/EN bkpn_clear: FLUKE 712BEN c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature calibrator sr_no_br_cl_ns: 4387857 sr_ns: FLUKE4387857
r: 03392951 p: 3112.59 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 3112.59 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02957844 p: 273.388 pid: 73565 b: FLUKE q: 0 st: lt: 5 ean: 0095969417853 sr: FLUKE 3045631 sr_no_br: 3045631 sr_no_br_cl: 3045631 sr_cl: FLUKE3045631 sr_dash: sold: 3007.268 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TLK287 Electronics Master measuring lead kit - 3045631 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: Fluke TLK287 Electronics Master test lead set is ideal for electronics testing and design. The set consists of accurate electronic measurement probes with multiple spring-loaded pointed probes for optimal contact with SMD measurement points. Micro grippers and leads allow you to make fine-sensitive SMD measurements. Mini crocodile clips, grippers and probes for practically all electronics applications. Modular measuring leads and lead-probe combinations for versatility and couplers for applications with long measuring leads. ds: dsc: kts: Electronics Master measuring lead kit kpn: TLK287 kpn_dash: kpn_clear: TLK287 bkpn: FLUKE TLK287 bkpn_clear: FLUKE TLK287 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3045631 sr_ns: FLUKE3045631
r: 02904822 p: 965.195 pid: 71206 b: FLUKE q: 0 st: lt: 6 ean: 0095969586689 sr: FLUKE 3947801 sr_no_br: 3947801 sr_no_br_cl: 3947801 sr_cl: FLUKE3947801 sr_dash: sold: 2895.585 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289 Digital RMS multimeter with data logging and trend capture - 3947801 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App The Fluke 289 is the high-performance industrial multimeter with logging function of the new generation, designed to solve complex problems in electronics, plant automation, power distribution and electromechanical equipment. With the ability to log data and view it graphically on screen, you can solve problems faster, minimising downtime. Let the new Fluke 289 monitor your systems or processes while you are away doing other work. Now communicate wirelessly with your iOS and Android devices, using the new Fluke Connect Mobile App and the ir3000 FC wireless connector (not included). Key features: Compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large dot matrix display, 1/4 VGA, up to 50,000 counts and with white backlight. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of recorded measurement values without a PC. Store up to as many as 15,000 recorded events. Multiple log sessions can be saved before downloading to a PC. Two connections for 50-ohm range with 1 milliohm resolution and 10 mA source current. Useful for measuring the resistance of motor windings and comparing differences in them or for measuring contact resistance. Low-pass filter for accurate simultaneous voltage and frequency measurements in frequency-controlled drives and other devices that cause electrical disturbances. LoZ Volts. Low input impedance, prevents erroneous readings due to 'phantom voltage'. Also recommended for testing for presence or absence of (mains) voltage. Internal auxiliary screens for measurement functions. Uncertain about a function? Go to that function and press the 'i' key. Real-time clock for automatic timing of stored measurement values. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. True-RMS AC voltage and current for accurate measurements on non-linear signals. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Peak recording for recording transients at speeds up to 250 ?s. Premium measuring leads and crocodile clips included. Banana plugs included. Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. Optional FlukeView Forms software lets you document, store and analyse individual readings or a range of readings, then turn them into professional-looking documents. Limited lifetime warranty. ds: dsc: Scope of delivery 289 True-RMS electronic multimeter with log function and TrendCapture TL71 test leads AC175 alligator clips Batteries (6x AA) Note: Fluke ir3000 FC infrared connector required for communication via Fluke Connect (not included) kts: Digital RMS multimeter with data logging and trend capture kpn: 289 kpn_dash: kpn_clear: 289 bkpn: FLUKE 289 bkpn_clear: FLUKE 289 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947801 sr_ns: FLUKE3947801
r: 02951454 p: 2867.826 pid: 72620 b: FLUKE q: 0 st: lt: 12 ean: 0095969814966 sr: FLUKE 4755890 sr_no_br: 4755890 sr_no_br_cl: 4755890 sr_cl: FLUKE4755890 sr_dash: sold: 2867.826 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 123B/EU/S industrial scopemeter 20MHZ (incl. SCC kit) - 4755890 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 123B handheld oscilloscope Shielded test leads with black earth wires Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 20MHZ (incl. SCC kit) kpn: 123B/EU/S kpn_dash: kpn_clear: 123BEUS bkpn: FLUKE 123B/EU/S bkpn_clear: FLUKE 123BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755890 sr_ns: FLUKE4755890
r: 02951452 p: 2841.38 pid: 71097 b: FLUKE q: 0 st: lt: 10 ean: 0095969814805 sr: FLUKE 4755731 sr_no_br: 4755731 sr_no_br_cl: 4755731 sr_cl: FLUKE4755731 sr_dash: sold: 2841.38 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU industrial scopemeter 40MHZ - 4755731 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 1x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack kts: industrial scopemeter 40MHZ kpn: 124B/EU kpn_dash: kpn_clear: 124BEU bkpn: FLUKE 124B/EU bkpn_clear: FLUKE 124BEU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755731 sr_ns: FLUKE4755731
r: 02268888 p: 2805.076 pid: 95685 b: FLUKE q: 0 st: lt: 15 ean: 0095969726863 sr: FLUKE 4489229 sr_no_br: 4489229 sr_no_br_cl: 4489229 sr_cl: FLUKE4489229 sr_dash: sold: 2805.076 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 805 FC vibration meter - 4489229 cn: VIBRATION METER cn2: VIBRATION METER cn_clear: VIBRATIONMETER d: Key features: Easy setup: Quickly list devices and work order on your PC, set machine profiles with the Fluke Connect app on your smart device, move routes to your 805 FC for your on-site technicians. Consistent data quality: Take accurate, reliable measurements at both low and high frequency ranges Mobile access to data: Store results in the cloud and share data remotely with your team Innovative sensor design: Innovative sensor design minimises measurement differences due to instrument angle and contact pressure Product description: Make go/no-go decisions with confidence. The Fluke 805 FC vibration meter is the most reliable vibration survey instrument for front-line mechanical service teams who want to determine the severity of general vibration using reproducible readings and provide a reliable indication of overall vibration, bearing condition and machine condition. With the Fluke Connect mobile app, it is now easier than ever to manage your vibration survey workflow. Integrated machine profile functionality allows you to set up machine profiles using the app and then send them directly to your 805 FC vibration meter. Users can then use the list of machine profiles to create work orders and develop route-based maintenance schedules that can be dynamically sent to on-site technicians, ensuring proper focus on critical equipment. Once a machine has been tested, the 805 FC transmits the results directly to the app and links them to the right profile and route. This data can be easily shared between teams, allowing you to make better maintenance decisions. Other useful features Reliable, reproducible and accurate instrument for checking bearings and general vibration resistance Features an innovative sensor design that minimises measurement differences due to instrument angle and contact pressure Guarantees constant data quality at both low and high frequencies A four-level scale allows the severity of problems and the condition of bearings to be determined Allows you to export data via USB or wirelessly, via the Fluke Connect mobile app Compatible with the Fluke Connect Mobile app that can send readings to your smartphone for real-time sharing Enables quick approval of next steps if machine condition is compromised via the Fluke Connect mobile app* Ability to trend in Microsoft Excel through integrated templates Measures overall vibration level (10 Hz to 1000 Hz) with units for acceleration, velocity and displacement for a wide range of machines With Crest Factor+ technology for reliable bearing assessment between 4,000 Hz and 20,000 Hz through direct measurement with the sensor tip Compares vibration levels with severity scales according to ISO-10816 and stores results in the Fluke Connect Cloud Coloured lighting (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements Temperature measurement with Spot IR sensor for expanded diagnostic capabilities With internal memory for storing max. 3500 measurement values Support of external accelerometer (optional) for hard-to-reach places With integrated torch for viewing measurement points in dark places Equipped with large, high-resolution display for easy navigation and reading ds: dsc: Scope of delivery Fluke 805 FC vibration meter USB cable Storage case Belt holster Quick guide Two (2) AA batteries kts: vibration meter kpn: 805 FC kpn_dash: kpn_clear: 805FC bkpn: FLUKE 805 FC bkpn_clear: FLUKE 805FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Vibration meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke vibration meter sr_no_br_cl_ns: 4489229 sr_ns: FLUKE4489229
r: 03252439 p: 902.98 pid: 73069 b: FLUKE q: 0 st: lt: 38 ean: 0195112041215 sr: FLUKE 5337394 sr_no_br: 5337394 sr_no_br_cl: 5337394 sr_cl: FLUKE5337394 sr_dash: sold: 2708.94 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 393FC-PVLEAD current clamp 1500 V with Pomona test leads - 5337394 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 393 FC CAT III 1500 V True-RMS solar current clamp with iFlex is designed for solar photovoltaic (PV) technicians and maintenance professionals working in high DC voltage environments: PV arrays, wind power, electric railways, battery banks for emergency power supplies in data centres. The current clamp measures up to 1500 V DC and 1000 V AC with test leads and up to 999.9 A DC or AC via the jaw. The included iFlex flexible current clamp offers extended AC current measurements up to 2500 A. The 393 has a thin jaw, allowing you to access cables in crowded combiner cabinets. Moreover, the measuring leads are designed with your work in mind and also comply with safety specification CAT III 1500 V DC. Key features Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and IP54 rated for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity IP54 protection class, ideal for outdoor work on solar panels and wind systems DC power measurement, with readings in kVA Audio polarity indicator helps prevent unintentional faulty wiring Visual throughput tests display a bright green light on the screen, ideal when working in dark and noisy environments Log and report test results via Fluke Connect software When measuring AC current, the included flexible current clamp iFlex gives you unparalleled access to cables in tight spaces. The iFlex probe can be rotated through extremely tight spaces and delivers accurate current measurements. ds: dsc: Scope of delivery 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, right-angle plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap High-quality protective bag Pomona PVLEAD1 MC4 to 4 mm test lead set Pomona PVLEAD3 MC4 measuring lead set for solar current clamp kts: current clamp 1500 V with Pomona test leads kpn: 393FC-PVLEAD kpn_dash: 393FC kpn_clear: 393FCPVLEAD bkpn: FLUKE 393FC-PVLEAD bkpn_clear: FLUKE 393FCPVLEAD c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5337394 sr_ns: FLUKE5337394
r: 02951127 p: 890.814 pid: 73255 b: FLUKE q: 0 st: lt: 8 ean: 0095969586665 sr: FLUKE 3947781 sr_no_br: 3947781 sr_no_br_cl: 3947781 sr_cl: FLUKE3947781 sr_dash: sold: 2672.442 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 287 Digital RMS multimeter with data logging and trend capture - 3947781 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App The Fluke 287 True-RMS electronic multimeter with log function and TrendCapture quickly documents design performance and graphically displays what happened. Thanks to its unique logging and graphing capabilities, you no longer need to download logged values to a PC to detect a trend. The Fluke 287 combines more accuracy and convenience in a handheld multimeter than ever before. Key features Now compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring tools with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture quickly graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large 1/4 VGA display up to 50,000 counts, with white backlight. Multiple sets of measurement information can be displayed simultaneously. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of captured measurement values without a PC. Store up to 15,000 recorded events. Internal help screens for measurement functions. You can store and name measured values on site and recall them later. Multilingual interface. Multiple logging sessions possible without downloading. DC base accuracy of 0.025%. AC voltage bandwidth 100 kHz. Real-time clock for automatic time stamping of stored measured values. True-RMS AC voltage and current for accurate measurements for complex signals or non-linear loads. AC bandwidth specified up to 100 kHz. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Temperature function. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. Peak recording for recording transients at rates up to 250 ?s. Premium measurement leads and crocodile clips included. Optional FlukeView Forms software lets you document, store and analyse individual measured values or a range of measured values, then turn them into professional-looking documents. With the optional magnetic hanging clip, you can hang the meter so you can easily view it while keeping your hands free for work. Limited lifetime warranty. ds: dsc: Scope of delivery 287 True-RMS electronic multimeter with log function and TrendCapture TL71 test leads AC175 alligator clips Batteries (6x AA) Note: Fluke ir3000 FC infrared connector required for communication via Fluke Connect (not included) kts: Digital RMS multimeter with data logging and trend capture kpn: 287 kpn_dash: kpn_clear: 287 bkpn: FLUKE 287 bkpn_clear: FLUKE 287 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947781 sr_ns: FLUKE3947781
r: 02381552 p: 295.719 pid: 94620 b: FLUKE q: 1 st: 1 lt: 1 ean: 0095969291385 sr: FLUKE 2435077 sr_no_br: 2435077 sr_no_br_cl: 2435077 sr_cl: FLUKE2435077 sr_dash: sold: 2661.471 p_range: none type: standard act: 1 avo: 1 av: Max. voltage 400 V Max. frequency 400 Hz n: FLUKE 9062 motor and phase rotation indicator - 2435077 cn: PHASE SEQUENCE TESTER cn2: PHASE SEQUENCE TESTER cn_clear: PHASESEQUENCETESTER d: Product description: Unique phase rotation indicator with motor rotation indication capability The unique Fluke 9062 displays the rotational field and rotation of motors and offers the benefits of non-contact detection. Intended specifically for commercial and industrial environments, the Fluke 9062 gives a quick indication of three-phase rotation or can be used to determine the rotation of synchronous and asynchronous three-phase motors using the supplied test leads. Non-contact detection is ideal for measurements on motors whose shaft is not visible. The measuring probes supplied with the instrument have a variable clamping range to allow safe contact, especially with industrial sockets. Key features Three-phase indication Phase rotation indication Indication of direction of rotation of motors Contactless determination of direction of rotation of running motors ds: dsc: Scope of delivery Motor and phase rotation indicator 3 measuring leads 3 measuring probes 3 crocodile clips battery, 9 V User's manual kts: motor and phase rotation indicator kpn: 9062 kpn_dash: kpn_clear: 9062 bkpn: FLUKE 9062 bkpn_clear: FLUKE 9062 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Phase sequence tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke phase sequence tester sr_no_br_cl_ns: 2435077 sr_ns: FLUKE2435077
r: 02958382 p: 647.89 pid: 72926 b: FLUKE q: 0 st: lt: 10 ean: 0095969724203 sr: FLUKE 4465618 sr_no_br: 4465618 sr_no_br_cl: 4465618 sr_cl: FLUKE4465618 sr_dash: sold: 2591.56 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3000 FC KIT wireless AC current clamp module kit - 4465618 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Features 3000 FC digital multimeter Fluke's 3000 FC series wireless multimeter with the Fluke Connect app has all the necessary functions and features for easy troubleshooting when testing and measuring: AC and DC voltage measurements up to 1000 V AC and DC current measurements with 0.01 mA resolution Continuity test, resistance measurement, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54 Features a3000 FC The Fluke a3000 FC wireless AC current clamp module is a fully functional True-RMS current clamp that wirelessly transmits readings to other Fluke Connect-enabled master units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke a3000 FC wireless AC current clamp module has all the necessary functions and features for easy troubleshooting when testing and measuring: True-RMS AC current clamp Measurement of up to 400 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function ds: dsc: Scope of delivery Carrying case 3000 FC wireless digital multimeter a3000 FC current clamp module TL175 test leads AC175 alligator clips kts: wireless AC current clamp module kit kpn: A3000 FC KIT kpn_dash: kpn_clear: A3000FCKIT bkpn: FLUKE A3000 FC KIT bkpn_clear: FLUKE A3000FCKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4465618 sr_ns: FLUKE4465618
r: 37960633 p: 39.628 pid: 71847 b: FLUKE q: 19 st: 1 lt: 1 ean: 0095969589895 sr: FLUKE 3971218 sr_no_br: 3971218 sr_no_br_cl: 3971218 sr_cl: FLUKE3971218 sr_dash: sold: 2496.564 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL75-1 measuring lead set - 3971218 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: 1 pair (red, black) probes with comfort grip; test leads with silicone insulation and angled plugs Recommended for µV measurements Safety standard:CAT II/1000 V, 10 A, CCSA US-certified EN/IEC 61010-031:2002 +A1:2008 One year warranty ds: dsc: kts: measuring lead set kpn: TL75-1 kpn_dash: TL75 kpn_clear: TL751 bkpn: FLUKE TL75-1 bkpn_clear: FLUKE TL751 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3971218 sr_ns: FLUKE3971218
r: 02955659 p: 130.909 pid: 72818 b: FLUKE q: 1 st: 1 lt: 1 ean: 0095969589857 sr: FLUKE 3971178 sr_no_br: 3971178 sr_no_br_cl: 3971178 sr_cl: FLUKE3971178 sr_dash: sold: 2487.271 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL220-1 SureGrip industrial measuring lead set - 3971178 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Key features: The TL220, SureGrip industrial test lead set is designed to provide a reliable grip for slippery hands. With interchangeable test lead set for multiple types of electrical applications. Compatible with all instruments and measuring probes suitable for sheathed standard 4mm banana connectors. Product description: SureGrip design so you can do your work comfortably. With interchangeable test kit for multiple electrical devices. Compatible with all instruments and test probes suitable for standard 4mm sheathed banana connectors. ds: dsc: Scope of delivery AC220 SureGrip crocodile clip set TP220 SureGrip Insulated test probe set TL224 SureGrip silicone test leads set kts: SureGrip industrial measuring lead set kpn: TL220-1 kpn_dash: TL220 kpn_clear: TL2201 bkpn: FLUKE TL220-1 bkpn_clear: FLUKE TL2201 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3971178 sr_ns: FLUKE3971178
r: 37990055 p: 408.328 pid: 74248 b: FLUKE q: 0 st: lt: 8 ean: 0095969287517 sr: FLUKE 2418208 sr_no_br: 2418208 sr_no_br_cl: 2418208 sr_cl: FLUKE2418208 sr_dash: sold: 2449.968 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 971 temperature-humidity meter - 2418208 cn: TEMPERATURE AND HUMIDITY METER cn2: TEMPERATURE AND HUMIDITY METER cn_clear: TEMPERATUREANDHUMIDITYMETER d: Product description: Temperature and humidity are two important factors in maintaining optimum comfort levels and good indoor air quality. Measure humidity and temperature quickly and easily with the Fluke 971. It is indispensable for plant maintenance engineers, utility technicians, HVAC field service personnel, and specialists determining indoor air quality (IAQ). Lightweight and comfortable to hold, the Fluke 971 is the perfect tool for monitoring problem areas. It is built for performance and durability, with its rugged holster. Key features Illuminated dual display for humidity and temperature Suitable for dew point and wet bulb temperatures Storage capacity of 99 records Ergonomic design with belt clip and protective holster Fast-response capacity sensor with protective cover Compact and lightweight (188 g) Temperature range from -20 °C to 60 °C Relative humidity from 5% to 95% Min/Max/Avg and Data Hold Battery indicator ds: dsc: Scope of delivery Temperature/humidity meter Operating instructions 4 AAA alkaline batteries kts: temperature-humidity meter kpn: 971 kpn_dash: kpn_clear: 971 bkpn: FLUKE 971 bkpn_clear: FLUKE 971 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature and humidity meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature and humidity meter sr_no_br_cl_ns: 2418208 sr_ns: FLUKE2418208
r: 08107176 p: 778.788 pid: 72967 b: FLUKE q: 0 st: lt: 6 ean: 0195112042892 sr: FLUKE 5347987 sr_no_br: 5347987 sr_no_br_cl: 5347987 sr_cl: FLUKE5347987 sr_dash: sold: 2336.364 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV300/TY2 Test adapter for EV charging station with type 2 connector - 5347987 cn: ACCESSORY/PART INSTALLATION TESTER cn2: ACCESSORY/PART INSTALLATION TESTER cn_clear: ACCESSORYPARTINSTALLATIONTESTER d: Product description The PE conductor can be tested for possible presence of hazardous voltage with respect to earth The PP state rotary switch allows the adapter to simulate different charging cable current conditions. Perform a simulation test of the vehicle to test different charging states Simulate PE fault (earth fault) Test in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 The FEV300 test adapter set with type 2 connector is designed to test the operation and safety of charging stations, mode 3, for charging AC traction batteries. The adapter imitates an electric vehicle and starts a charging cycle, activating the voltage/current output, allowing you to perform tests in combination with suitable measuring instruments such as an installation tester (Fluke 1664 FC) and/or an oscilloscope (Fluke 120B series). With the adapter set, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. Simplicity and convenience with an all-in-one adapter Use the FEV300-CON-TY2 Type 2 plug to connect to an EV charging station Type 2 with a wall outlet or connect to an EV charging station Type 2 with a vehicle connector. Perform various tests including earth fault checks, wire insulation, voltage measurement and duty cycle to see the max current available for charging an all-in-one adapter that can be safely integrated into the Fluke portfolio of test and measurement tools. With the FEV300, you can simulate CP fault (E) and PE fault (earth fault) and it offers separate phase indication with three LED lights to easily check if voltage is present. No need to bring an electric vehicle on site for fault finding at the charging station: the adapter acts as an electric vehicle when connected to a charging station for easy performance and maintenance testing. Suitable for Fluke 1662 multifunction installation tester Fluke 1663 multifunction installation tester Fluke 1664 FC multifunction installation tester Fluke 87 V digital multimeter Fluke 120B industrial ScopeMeter series handheld oscilloscopes Fluke 1587 FC insulation multimeter Fluke 1732 and 1734 three-phase electrical energy loggers Fluke 1735 three-phase power logger Fluke 1736 and 1738 three-phase Power Quality Loggers ds: dsc: Scope of delivery FEV300/BASIC test adapter FEV300-CON-TY2 Type 2 plug Carrying case kts: Test adapter for EV charging station with type 2 connector kpn: FEV300/TY2 kpn_dash: kpn_clear: FEV300TY2 bkpn: FLUKE FEV300/TY2 bkpn_clear: FLUKE FEV300TY2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part installation tester sr_no_br_cl_ns: 5347987 sr_ns: FLUKE5347987
