r: 02379708 p: 54.049 pid: 121975 b: RECTAVIT q: 7 st: 1 lt: 1 ean: 5412926445042 sr: RECTAVIT 125209 sr_no_br: 125209 sr_no_br_cl: 125209 sr_cl: RECTAVIT125209 sr_dash: sold: 26105.667 p_range: none type: standard act: 1 avo: 1 av: Net volume 4 l EUH-statements EUH208 Relative density 1,05 - 1,07 ADR packing group III ADR class 3 UN number UN1263 Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P280; P303 + P361 + P353; P304 + P340; P332 + P313; P362 + P364; P501 H-statements H226; H315; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Liquid Flash point 35 °C Packaging Can n: RECTAVIT 125209 polymer sealing paste for instant waterproofing dark grey (4 l) cn: COATING cn2: COATING cn_clear: COATING d: Product description Polymer sealing paste reinforced with fibres, for instant water sealing. Ability to instantly seal seams, cracks, cracks and roof penetrations up to 10 mm wide, even in damp and cold weather. Application Sealing of roofs, gutters, chimney flashings on roofing, bitumen products, asphalt, PVC, polyester, zinc, aluminium. Features Easily applicable Instantly forms a waterproof and weather-resistant layer Crack bridging, up to 10 mm Excellent adhesion to almost all common substrates Primer is usually not necessary Can be applied in all weather conditions, even in cold and humid weather Highly elastic, up to 1300% elongation Resistant to all weather influences and light mineral acids Does not contain bitumen ds: dsc: Scope of delivery Canister: 4 l kts: polymer sealing paste for instant waterproofing dark grey (4 l) kpn: 125209 kpn_dash: kpn_clear: 125209 bkpn: RECTAVIT 125209 bkpn_clear: RECTAVIT 125209 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rectavit / Rectavit technical and chemical products / Rectavit surface treatment and repair / Rectavit other surface treatment / Rectavit coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 125209 sr_ns: RECTAVIT125209
r: 02379703 p: 11.24 pid: 121971 b: RECTAVIT q: 3 st: 1 lt: 1 ean: 5412926445875 sr: RECTAVIT 125210 sr_no_br: 125210 sr_no_br_cl: 125210 sr_cl: RECTAVIT125210 sr_dash: sold: 10835.36 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml EUH-statements EUH208 Relative density 1,23 ADR packing group III ADR class 3 UN number UN1263 Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P280; P303 + P361 + P353; P304 + P340; P332 + P313; P362 + P364; P501 H-statements H226; H315; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Liquid Flash point 35 °C Packaging Can n: RECTAVIT 125210 polymer sealing paste for instant waterproofing dark grey (750 ml) cn: COATING cn2: COATING cn_clear: COATING d: Product description Polymer sealing paste reinforced with fibres, for instant water sealing. Ability to instantly seal seams, cracks, cracks and roof penetrations up to 10 mm wide, even in damp and cold weather. Application Sealing of roofs, gutters, chimney flashings on roofing, bitumen products, asphalt, PVC, polyester, zinc, aluminium. Features Easily applicable Instantly forms a waterproof and weather-resistant layer Crack bridging, up to 10 mm Excellent adhesion to almost all common substrates Primer is usually not necessary Can be applied in all weather conditions, even in cold and humid weather Highly elastic, up to 1300% elongation Resistant to all weather influences and light mineral acids Does not contain bitumen ds: dsc: Scope of delivery Canister: 0.75 l kts: polymer sealing paste for instant waterproofing dark grey (750 ml) kpn: 125210 kpn_dash: kpn_clear: 125210 bkpn: RECTAVIT 125210 bkpn_clear: RECTAVIT 125210 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rectavit / Rectavit technical and chemical products / Rectavit surface treatment and repair / Rectavit other surface treatment / Rectavit coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 125210 sr_ns: RECTAVIT125210
r: 11940029 p: 323.51 pid: 157126 b: TEROSON q: 0 st: lt: 10 ean: 4033267195222 sr: TEROSON 691488 sr_no_br: 691488 sr_no_br_cl: 691488 sr_cl: TEROSON691488 sr_dash: sold: 10028.81 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number Weight 40 kg Physical state Liquid Flash point > 100 °C n: TEROSON TEROPHON 112 DB soundproofing coating (40kg open bucket with lid) - 691488 cn: COATING cn2: COATING cn_clear: COATING d: Product description: TEROSON WT 112 DB is a highly efficient, paste-type soundproofing material used for secondary noise and vibration control on thin-walled sheet metal constructions. Examples are rail coaches, ships, ventilation ducts, fan housings, lifts and waste disposal units. The product offers outstanding absorption capabilities and thus the reduction of structure-borne noise. Excellent resistance to fire. ds: dsc: kts: soundproofing coating (40kg open bucket with lid) kpn: TEROPHON 112 DB kpn_dash: kpn_clear: TEROPHON112DB bkpn: TEROSON TEROPHON 112 DB bkpn_clear: TEROSON TEROPHON112DB c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson surface treatment and repair / Teroson other surface treatment / Teroson coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 691488 sr_ns: TEROSON691488
r: 03213549 p: 144.297 pid: 125466 b: SOUDAL q: 2 st: 1 lt: 1 ean: 5411183152762 sr: SOUDAL 134739 sr_no_br: 134739 sr_no_br_cl: 134739 sr_cl: SOUDAL134739 sr_dash: sold: 4040.316 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg Relative density 1,15 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane black 16 kg - 134739 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black 16 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 134739 sr_ns: SOUDAL134739
r: 03213554 p: 59.173 pid: 123053 b: SOUDAL q: 0 st: lt: 17 ean: 5411183161245 sr: SOUDAL 145786 sr_no_br: 145786 sr_no_br_cl: 145786 sr_cl: SOUDAL145786 sr_dash: sold: 1775.19 p_range: none type: standard act: 1 avo: 1 av: Weight 6 kg Relative density 1,5 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH210 Physical state Solid Flash point >100 °C n: SOUDAL Soudatight Hybrid air- and impact-proof membrane 6 kg - 145786 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight Hybrid is the hybrid version of Soudatight and can be used for both indoor and outdoor applications. This product allows very easy and fast application of a liquid, airtight membrane to penetrations, connections and surfaces (no roof applications). Soudatight Hybrid can be applied as a crease with a flat brush or using a hand, battery or pneumatic sealant gun. With the Cox Jetflow 3 Sachet 600 spray gun, Soudatight Hybrid can be applied both as a crease and sprayed as a coating. Properties: For exterior applications (interior applications also possible) Very good adhesion to most substrates Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Solvent- and isocyanate-free Complies with GEV-EMICODE EC-1 PLUS: very low emission Can be painted over Applications: For the air- and watertight finishing of penetrations, connections, surfaces (no roof applications) and window connections such as the inside inner leaf (day side), the outside inner leaf (for installation of facade insulation), under the window sill, the outside solid walls and the outside ventilated facades. Instructions for use: Ensure that Soudatight Hybrid is at room temperature before use. Soudatight Hybrid is applied to the substrate directly from the packaging using a flat brush or sealant gun (hand, battery or pneumatic). Spread the airtightness paste undiluted and evenly with a (flat) brush to form a seamless film of at least 1 mm thick, to be applied in several layers. Soudatight Hybrid can also be applied with a pneumatic spray gun (Cox Jetflow 3 Sachet 600) as a bead or sprayed as a coating. By turning the spray tip, one has the choice between a crease and spray application (spray = more open = apply less product). When using the Cox Jetflow 3, spraying is optimal at 5 to 6 bar with the spray tip +/- 75% open. Even after spraying, always smooth with a (flat) brush and respect the minimum layer thickness. The application thickness should be measured (wet) with a thickness gauge. For window applications, ensure that the air and watertightness paste forms a seamless membrane of at least 10 mm on the window frame, over the flexible foam up to ± 5 cm on the night side of the shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight Hybrid, before curing. Soudatight Hybrid can be removed from materials and tools with Soudal Surface Cleaner, White Spirit or Swipex, before curing has taken place. ds: dsc: kts: air- and impact-proof membrane 6 kg kpn: Soudatight Hybrid kpn_dash: kpn_clear: SoudatightHybrid bkpn: SOUDAL Soudatight Hybrid bkpn_clear: SOUDAL SoudatightHybrid c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145786 sr_ns: SOUDAL145786
r: 03213546 p: 107.933 pid: 123049 b: SOUDAL q: 0 st: lt: 5 ean: 5411183161276 sr: SOUDAL 145789 sr_no_br: 145789 sr_no_br_cl: 145789 sr_cl: SOUDAL145789 sr_dash: sold: 1403.129 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg ADR packing group UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane white 11 kg - 145789 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane white 11 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145789 sr_ns: SOUDAL145789
r: 02750258 p: 37.851 pid: 156222 b: CRC q: 12 st: 1 lt: 1 ean: 5412386058424 sr: CRC 2060660_SP500 sr_no_br: 2060660_SP500 sr_no_br_cl: 2060660_SP500 sr_cl: CRC2060660_SP500 sr_dash: sold: 1211.232 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml EUH-statements EUH066; EUH208 Relative density 0,785 ADR packing group ADR class 2.1 Principal hazard property GHS02 Flammable UN number UN1950 Conseils de prudence (P) P102; P210; P211; P251; P260; P271; P410 + P412; P501 H-statements H222; H229; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Aerosol Flash point -40 °C Packaging Spray can n: CRC Inox 200 anti-corrosion coating 500 ml - 2060660_SP500 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Anti-corrosion coating for stainless steel surfaces. Coating with good anti-corrosion properties, nice result, identical to stainless steel (inox). This coating dries quickly, is resistant to high temperatures and has excellent adhesion. It is an ideal retouching agent to use, for example, after welding or stainless steel construction work. Covers and protects discoloured weld seams. ds: dsc: kts: anti-corrosion coating 500 ml kpn: Inox 200 kpn_dash: kpn_clear: Inox200 bkpn: CRC Inox 200 bkpn_clear: CRC Inox200 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Crc / Crc technical and chemical products / Crc surface treatment and repair / Crc other surface treatment / Crc coating sr_no_br_cl_ns: 2060660_SP500 sr_ns: CRC2060660_SP500
r: 08112903 p: 136.322 pid: 167121 b: LOCTITE q: 0 st: lt: 8 ean: 4058093059265 sr: LOCTITE 2973887 sr_no_br: 2973887 sr_no_br_cl: 2973887 sr_cl: LOCTITE2973887 sr_dash: sold: 817.932 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg EUH-statements EUH071 ADR packing group II ADR class 8 UN number UN3259 Packaging Jar Principal hazard property GHS05 Corrosive Conseils de prudence (P) P273; P280; P303 + P361 + P353; P305 + P351 + P338; P310 H-statements H314; H317; H318; H411 Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid Flash point > 93 °C n: LOCTITE PC 7226 epoxy surface coating grey (1 kg bucket) - 2973887 cn: COATING cn2: COATING cn_clear: COATING d: Product description Grey, carbide-filled, splashable, non-sagging 2K epoxy-based surface coating that protects processing equipment against abrasive wear from fine particles (with or without chemical attack) Suitable for use overhead and on vertical surfaces Typically used for dredge pump liners, chutes and cisterns, pump impellers, vibrating feed lines and shafts/ funnels Splashable Can be used overhead or on vertical surfaces Extends life of equipment ds: dsc: kts: epoxy surface coating grey (1 kg bucket) kpn: PC 7226 kpn_dash: kpn_clear: PC7226 bkpn: LOCTITE PC 7226 bkpn_clear: LOCTITE PC7226 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Loctite / Loctite technical and chemical products / Loctite surface treatment and repair / Loctite other surface treatment / Loctite coating sr_no_br_cl_ns: 2973887 sr_ns: LOCTITE2973887
r: 12030268 p: 18.677 pid: 104331 b: 3M - SCOTCH q: 0 st: lt: 8 ean: 04001895305818 sr: 3M - SCOTCH 7100036939 sr_no_br: 7100036939 sr_no_br_cl: 7100036939 sr_cl: 3MSCOTCH7100036939 sr_dash: 3M sold: 784.434 p_range: none type: standard act: 1 avo: 1 av: Net volume 400 ml ADR packing group UN number UN1950 Principal hazard property GHS02 Flammable ADR class 2.1 Conseils de prudence (P) P210; P211; P251; P260E; P305 + P351 + P338; P410 + P412 H-statements H222; H229; H315; H319; H336; H373 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Flash point -30 °C n: 3M - SCOTCH 1601 transparent insulation varnish (400 ml spray) - 7100036939 cn: COATING cn2: COATING cn_clear: COATING d: Product description Protective coating for electrical connections, switches, switchgear, terminal blocks, electronic components, printed circuit boards, coils and windings Excellent adhesion to a variety of surfaces, such as metal, glass, plastic, wood, etc. High dielectric strength UV-resistant Available in 400ml aerosol can Scotch® 160x is an insulating and protective varnish based on alkyd resin. When the lacquer dries, it forms a flexible and protective film with excellent adhesion to most surfaces, such as metal, glass, plastic and wood. Scotch® 160x is an alkyd resin-based insulating and protective lacquer. When the lacquer dries, it forms a flexible and protective layer with excellent adhesion to most surfaces, such as metal, glass, plastic and wood. The moisture-resistant lacquer is resistant to UV radiation, acids, oil, alkali and various weathering agents, and has high dielectric strength. Available in transparent, red, black and grey ds: dsc: kts: transparent insulation varnish (400 ml spray) kpn: 1601 kpn_dash: kpn_clear: 1601 bkpn: 3M - SCOTCH 1601 bkpn_clear: 3M - SCOTCH 1601 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / 3m - scotch / 3m - scotch technical and chemical products / 3m - scotch surface treatment and repair / 3m - scotch other surface treatment / 3m - scotch coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 7100036939 sr_ns: 3M-SCOTCH7100036939
