- Net volume: 250 ml
- Relative density: 1,15
- ADR packing group: Not applicable
Thread sealant for leak-free threaded connections
A thread sealant locks and seals metal threaded connections, so threaded couplings do not vibrate loose and do not let liquid or gas escape. Installers, machine builders and maintenance technicians use them on pipework, hydraulics and pneumatics where tape or hemp falls short. The liquid products fill the gap between the thread flanks completely and cure into a solid, vibration-resistant layer.
You choose the strength based on whether you need to dismantle later: low-strength grades come apart again with hand tools, while high-strength types give a near-permanent lock. Also check the chemical resistance against the media in the line and the maximum thread diameter the product handles. A clean, grease-free thread determines the final strength, so always degrease thoroughly beforehand.
Brands such as Loctite and Soudal offer sealants for a wide range of temperatures and materials, from fine instrument couplings to coarse pipework, so you find the right viscosity and strength for every joint. Pick a thread sealant on strength, media and thread size rather than habit, and the connection stays tight.
- Net volume: 100 ml
- EUH-statements: EUH441
- Relative density: 1,14
- Net volume: 50 ml
- Relative density: 1,15
- ADR packing group: Not applicable
- Net volume: 50 ml
- Relative density: 1,1
- ADR packing group: Not applicable
- Net volume: 50 ml
- Relative density: 1,08
- ADR class: Not applicable
- Relative density: 1,08
- Net volume: 50 ml
- ADR class: Not applicable
- Net volume: 50 ml
- ADR packing group: Not applicable
- ADR class: Not applicable
- Length: 50 m
- ADR packing group: Not applicable
- ADR class: Not applicable
- Net volume: 50 ml
- ADR class: Not applicable
- UN number: Not applicable
- Net volume: 50 ml
- Relative density: 1,08
- ADR class: Not applicable
- Length: 160 m
- ADR packing group: Not applicable
- ADR class: Not applicable
- Net volume: 250 ml
- ADR packing group: Not applicable
- ADR class: Not applicable
- ADR packing group: Not applicable
- ADR class: Not applicable
- UN number: Not applicable
- Net volume: 250 ml
- Relative density: 1,25
- ADR packing group: Not applicable
- Net volume: 50 ml
- ADR packing group: Not applicable
- ADR class: Not applicable
- Length: 50 m
- Relative density: 1
- ADR packing group: Not applicable
- Net volume: 250 ml
- Relative density: 1,08
- ADR packing group: Not applicable
- Net volume: 250 ml
- Flash point: > 100 °C
- Physical state: Liquid
- Net volume: 250 ml
- ADR packing group: Not applicable
- ADR class: Not applicable
- Net volume: 250 ml
- ADR packing group: Not applicable
- ADR class: Not applicable