r: 02908898 p: 278.347 pid: 71224 b: FLUKE q: 0 st: lt: 6 ean: 0095969785266 sr: FLUKE 4628917 sr_no_br: 4628917 sr_no_br_cl: 4628917 sr_cl: FLUKE4628917 sr_dash: sold: 2226.776 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE CXT1000 extremely hard case - 4628917 cn: CASE cn2: CASE cn_clear: CASE d: Product description: The CXT1000 is a hard case that holds all your Fluke measuring instruments and accessories. Configure the blocks of foam plastic inside to store, protect and carry your measuring instruments. Key features Innovative features that ensure unmatched strength and durability Provides maximum protection for your Fluke instruments and accessories against severe shock, vibration and drops Sealed with O-ring, waterproof to a depth of 0.9 metres Airtight and built for the most extreme conditions Great for air travel thanks to an automatic pressure equalisation valve that reacts to changes in air pressure Spring-loaded locking mechanism keeps everything in place Lock holders for use with padlocks provide excellent extra security 2 pieces of customisable foam plates provide a highly customised fit for your Fluke instruments and accessories Stackable, with a finger groove on both sides for easy pick-up and carrying Lifetime warranty on the outer shell IP67 protection class RoHS compliant ds: dsc: kts: extremely hard case kpn: CXT1000 kpn_dash: kpn_clear: CXT1000 bkpn: FLUKE CXT1000 bkpn_clear: FLUKE CXT1000 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Case | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke case sr_no_br_cl_ns: 4628917 sr_ns: FLUKE4628917
r: 03343204 p: 2153.375 pid: 166035 b: FLUKE q: 0 st: lt: 10 ean: 0195112119617 sr: FLUKE 5581068 sr_no_br: 5581068 sr_no_br_cl: 5581068 sr_cl: FLUKE5581068 sr_dash: sold: 2153.375 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1672 SCH FTT multifunctional installation tester with TruTest software in case - 5581068 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1672 multifunction installation tester with the TruTestTM software bundle will revolutionise the way you work. With its ergonomic design, seamless user interface, integrated data management capabilities and comprehensive reporting software, the 1672 sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557.The Fluke 1670-series multifunctional installation testers streamline your installation and test preparations using the intuitive user interface and a high-resolution colour touch screen. You can enter site information and set test routes directly from the tester or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software in case kpn: 1672 SCH FTT kpn_dash: kpn_clear: 1672SCHFTT bkpn: FLUKE 1672 SCH FTT bkpn_clear: FLUKE 1672SCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581068 sr_ns: FLUKE5581068
r: 02146467 p: 45.785 pid: 95623 b: FLUKE q: 7 st: 1 lt: 1 ean: 0095969589888 sr: FLUKE 3971207 sr_no_br: 3971207 sr_no_br_cl: 3971207 sr_cl: FLUKE3971207 sr_dash: sold: 2106.11 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL71-1 measuring lead set - 3971207 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: 1 pair (red, black) probes with comfort grip; test leads with silicone insulation and angled plugs Recommended for µV measurements Safety standard:CAT II/1000 V, 10 A, CCSA US-certified EN/IEC 61010-031:2002 +A1:2008 One year warranty ds: dsc: kts: measuring lead set kpn: TL71-1 kpn_dash: TL71 kpn_clear: TL711 bkpn: FLUKE TL71-1 bkpn_clear: FLUKE TL711 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3971207 sr_ns: FLUKE3971207
r: 02952116 p: 1996.363 pid: 71424 b: FLUKE q: 0 st: lt: 8 ean: 0095969673501 sr: FLUKE 4352480 sr_no_br: 4352480 sr_no_br_cl: 4352480 sr_cl: FLUKE4352480 sr_dash: sold: 1996.363 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA7 pressure module (0 - 35 bar) - 4352480 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 500 psi (0 to 35 bar), (0 to 3500 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 35 bar) kpn: 750PA7 kpn_dash: kpn_clear: 750PA7 bkpn: FLUKE 750PA7 bkpn_clear: FLUKE 750PA7 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352480 sr_ns: FLUKE4352480
r: 02952099 p: 1987.438 pid: 71410 b: FLUKE q: 0 st: lt: 10 ean: 0095969673402 sr: FLUKE 4352385 sr_no_br: 4352385 sr_no_br_cl: 4352385 sr_cl: FLUKE4352385 sr_dash: sold: 1987.438 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P09 pressure module (0 - 100 bar) - 4352385 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 1500 psi (0 to 100 bar), (0 to 10 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 100 bar) kpn: 750P09 kpn_dash: kpn_clear: 750P09 bkpn: FLUKE 750P09 bkpn_clear: FLUKE 750P09 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352385 sr_ns: FLUKE4352385
r: 02951281 p: 395.611 pid: 71990 b: FLUKE q: 0 st: lt: 6 ean: 0095969659475 sr: FLUKE 4297126 sr_no_br: 4297126 sr_no_br_cl: 4297126 sr_cl: FLUKE4297126 sr_dash: sold: 1978.055 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T5-600/62MAX+/1ACE kit with infrared thermometer, electrical tester and voltage detector - 4297126 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: This kit is designed to help electricians and HVAC technicians solve problems faster. First test for overheated electrical appliances using an IR thermometer and then use electrical test instruments to find out more about the problem. Features T5-600 voltage, continuity and current testers Automatically measures AC and DC voltage with accurate digital resolution. Displays resistance up to 1000 ? Simple and accurate OpenJaw current measurement. Continuity beep. Rugged enough to withstand a drop of 3 m (10 ft ). 600 V model. Automatic shutdown to save battery life. AC current. Display hold. All inputs of the T5-600 are protected according to EN61010-1 CAT III 600V. UL, CSA and VDE listed. Features Fluke 62 MAX+ Small in size. Big on ruggedness. Dust and water resistant: IP54 class. Rugged: 3 m (9.8 ft) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Distance to spot: 12:1. Dual lasers: Identifies the area to be measured. Large backlit display: Makes data easier to read, even in dark environments. C115 deluxe soft carrying case with shoulder strap. ds: dsc: Scope of delivery T5-600 electrical tester up to 600V 62 MAX+ IR thermometer kts: kit with infrared thermometer, electrical tester and voltage detector kpn: T5-600/62MAX+/1ACE kpn_dash: T5 kpn_clear: T560062MAX1ACE bkpn: FLUKE T5-600/62MAX+/1ACE bkpn_clear: FLUKE T560062MAX1ACE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4297126 sr_ns: FLUKE4297126
r: 37990014 p: 1952.566 pid: 72991 b: FLUKE q: 0 st: lt: 15 ean: 0095969050692 sr: FLUKE 620101 sr_no_br: 620101 sr_no_br_cl: 620101 sr_cl: FLUKE620101 sr_dash: sold: 1952.566 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 715 Volt/mA calibrator - 620101 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 715 V/mA calibrator delivers excellent performance and is extremely durable and reliable. This calibrator comes in the package with the rugged Fluke 80-series DMM. It is compact, lightweight, and easy to carry. The 715 is easy to use thanks to its push-button interface, which is similar to that of the Fluke 740-series multifunction documenting process calibrators. It is resistant to EMI, dust and splash water, and features a removable battery cover that allows quick battery replacement. Key features Measure loop current signals (0-20 mA, 4-20 mA) with a very high accuracy of 0.015% and a resolution of 1 mA Measure the output voltage signals of a process, coming from PLCs or transmitters Generate or simulate a loop current of 24 mA Supply voltage up to 100 mV or 10 V 24-V loop power supply with simultaneous current measurement Extra accuracy when measuring and generating voltage and current Longer battery life 250-ohm HART resistor with loop power supply Holster includes a storage compartment for test leads Compatible with the magnet pendant system for tool sets Gradual and linear rising output function Adjustable zero position and adjustable range ds: dsc: Scope of delivery Fluke 715 Volt/mA calibrator including: Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: Volt/mA calibrator kpn: 715 kpn_dash: kpn_clear: 715 bkpn: FLUKE 715 bkpn_clear: FLUKE 715 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 620101 sr_ns: FLUKE620101
r: 02951140 p: 974.775 pid: 73266 b: FLUKE q: 0 st: lt: 8 ean: 0095969262965 sr: FLUKE 2157280 sr_no_br: 2157280 sr_no_br_cl: 2157280 sr_cl: FLUKE2157280 sr_dash: sold: 1949.55 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1577 insulation multimeter - 2157280 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Two powerful instruments in one The Fluke 1587 and 1577 insulation multimeters combine a digital insulation tester with a full-fledged digital True RMS multimeter in one compact and portable instrument, for optimum versatility in both troubleshooting and preventive maintenance. Whether you are working on motors, generators, cables or switchgear, the Fluke 1587/1577 insulation multimeters are ideal to help you do just that, and at a much lower cost than if you had to buy two products. Key features: Insulation test voltages: 500 V and 1000 V Insulation test: 0.1 MOhm to 600 MOhm Automatic discharge of capacitive voltages AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Pass-through Three-year warranty Remote use probe, test leads, alligator clips Robust carrying case Automatic switch-off for longer battery life True-RMS Large backlit display Detection of live circuits prevents, for additional user safety, insulation tests at voltages > 30 V Measurement category CAT III 1000 V, CAT IV 600 V Suitable for optional Fluke TPAKTM magnetic pendant system, leaving your hands free for other work ds: dsc: kts: insulation multimeter kpn: 1577 kpn_dash: kpn_clear: 1577 bkpn: FLUKE 1577 bkpn_clear: FLUKE 1577 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 2157280 sr_ns: FLUKE2157280
r: 02909234 p: 647.938 pid: 72527 b: FLUKE q: 0 st: lt: 15 ean: 0095969400367 sr: FLUKE 2837799 sr_no_br: 2837799 sr_no_br_cl: 2837799 sr_cl: FLUKE2837799 sr_dash: sold: 1943.814 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Max. temperature 650 °C Optical ratio 30:1 Power supply 2 x AA Accuracy ± 1 °C n: FLUKE 566 infrared thermometer (from -40°C to +650°C) - 2837799 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: The 566 infrared and contact thermometer features a simple, three-button on-screen menu interface (in 6 languages) to make measuring temperature easier than ever. You can quickly navigate through advanced functions to adjust emissivity, start recording data or turn alarms on and off with just a few button presses. With its rugged, user-friendly and ergonomic design, the Fluke 566 can withstand harsh industrial, electrical and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), allowing you to work more efficiently in more applications. Key features Two-in-one IR and contact thermometer with a 30:1 distance-to-plate ratio. Measures temperatures from -40°C to 650°C (40°F to 1202°F). Makes it easy to access advanced functions with softkey buttons and graphic display. Features a rugged, ergonomic design that withstands harsh industrial, electrical and mechanical environments. Works with most K-type thermocouples Other features Adjustable radiant power allowing you to measure a wide variety of surfaces with confidence. Up to 20 data points for later downloading and recall Two levels of display backlighting Type-K thermocouple probe included Features audible and visual alarms to immediately alert you to measurements outside set limits. Provides MAX, MIN, DIF and AVG functions to quickly identify problems. ds: dsc: Scope of delivery Fluke 566 Infrared and contact thermometer Thermocouple probe K Durable hard case 2 AA batteries Quick start guide in 6 languages User guide on CD in 6 languages (English, Spanish, French, German, Portuguese and Simplified Chinese) 2-year warranty kts: infrared thermometer (from -40°C to +650°C) kpn: 566 kpn_dash: kpn_clear: 566 bkpn: FLUKE 566 bkpn_clear: FLUKE 566 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 2837799 sr_ns: FLUKE2837799
r: 02952163 p: 1934.545 pid: 71235 b: FLUKE q: 0 st: lt: 8 ean: 0095969673631 sr: FLUKE 4352616 sr_no_br: 4352616 sr_no_br_cl: 4352616 sr_cl: FLUKE4352616 sr_dash: sold: 1934.545 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD27 pressure module (-1 - 20 bar) - 4352616 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 300 psi (-1 to 20 bar), (-100 to 2000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 20 bar) kpn: 750PD27 kpn_dash: kpn_clear: 750PD27 bkpn: FLUKE 750PD27 bkpn_clear: FLUKE 750PD27 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352616 sr_ns: FLUKE4352616
r: 02951135 p: 1929.042 pid: 71968 b: FLUKE q: 0 st: lt: 8 ean: 0095969599733 sr: FLUKE 4017165 sr_no_br: 4017165 sr_no_br_cl: 4017165 sr_cl: FLUKE4017165 sr_dash: sold: 1929.042 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 28 II EX True RMS digital multimeter - 4017165 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description 4-1/2-digit mode for accurate measurements (20,000 counts) True RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V and 10 A AC and DC (remember that hazardous areas require measurements with lower values) A low-pass filter ensures accurate voltage and frequency measurements on frequency-controlled drives Frequency up to 200 kHz and % duty cycle, for diagnosing frequency-controlled drives and switching power supplies Resistance measurement and loop-through and diode test Capacitance range of 10,000 µF for components and motor capacitors Conductance measurements for high resistance or leakage tests Minimum, maximum and average values and peak recording for automatic recording of transients and oscillations Relative mode for eliminating test lead interference during resistance measurements Automatic and manual range setting for maximum flexibility Input Alert function protects you by means of a beeping signal and the flashing 'Lead' message when cords are connected to the wrong inputs The illuminated keys are especially easy to spot in poorly lit environments, even when wearing all the required personal protective equipment Large display figures and a bright white backlight with two illumination levels also ensure good visibility Long battery life - 400 hours normally, without backlight (alkaline) Key features A fully sealed, IP67-approved housing Resistant to a drop of up to 3 metres (with holster) Dustproof according to IEC 60529 IP6x Waterproof according to IEC 60529 IPx7 CAT III 1000 V, CAT IV 600 V Reversible holster for extra protection of the display when not in use ds: dsc: kts: True RMS digital multimeter kpn: 28 II EX kpn_dash: kpn_clear: 28IIEX bkpn: FLUKE 28 II EX bkpn_clear: FLUKE 28IIEX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4017165 sr_ns: FLUKE4017165
r: 02959874 p: 931.575 pid: 71465 b: FLUKE q: 0 st: lt: 11 ean: 0195112031414 sr: FLUKE 5302512 sr_no_br: 5302512 sr_no_br_cl: 5302512 sr_cl: FLUKE5302512 sr_dash: sold: 1863.15 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE PTi120 pocket thermal imaging camera 120x90 9Hz - 5302512 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description The power of a professional thermal imaging camera that fits in your pocket. Touchscreen IR Fusion that automatically captures a digital image of visible light and an infrared image simultaneously, making it easy to pinpoint problems. 8.9 cm (3.5 in) touchscreen LCD display for easy troubleshooting. Fully radiometric thermal imaging camera providing pixel-accurate measurement data with 120 x 90 (10,800 pixels) infrared resolution. Housing with IP54 protection class, making the camera resistant to dirt, water and a fall of up to 1 metre. ds: dsc: Scope of delivery Thermal imaging camera Carrying case Carrying strap USB cable kts: pocket thermal imaging camera 120x90 9Hz kpn: PTi120 kpn_dash: kpn_clear: PTi120 bkpn: FLUKE PTi120 bkpn_clear: FLUKE PTi120 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5302512 sr_ns: FLUKE5302512
r: 02951795 p: 927.33 pid: 73384 b: FLUKE q: 0 st: lt: 5 ean: 0095969345101 sr: FLUKE 2584935 sr_no_br: 2584935 sr_no_br_cl: 2584935 sr_cl: FLUKE2584935 sr_dash: sold: 1854.66 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i30s AC/DC current clamp - 2584935 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The i30s current clamp uses Hall Effect technology to measure both direct and alternating current. The i30s can be used with oscilloscopes and other suitable recording instruments to accurately measure current without the need to interrupt the circuit. Key features Current range: 30 mA to 30 A DC, 30 mA to 20 A AC (rms) Frequency range: DC up to 100 kHz (-0.5 dB) Safety classification CAT III 300 V ds: dsc: kts: AC/DC current clamp kpn: i30s kpn_dash: kpn_clear: i30s bkpn: FLUKE i30s bkpn_clear: FLUKE i30s c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 2584935 sr_ns: FLUKE2584935
r: 02055160 p: 123.099 pid: 96791 b: FLUKE q: 0 st: lt: 7 ean: 0095969589901 sr: FLUKE 3971229 sr_no_br: 3971229 sr_no_br_cl: 3971229 sr_cl: FLUKE3971229 sr_dash: sold: 1846.485 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL80A-1 measuring lead set - 3971229 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: Basic set of electronic measuring leads One set (red, black) of measuring leads, TL71-1 of 1 alligator clip and measuring pin extension. Safety standard: CAT II/300 V EN/IEC 61010-031:2002 +A1:2008 Measuring leads of 1 alligator clip and measuring pin extension. C75 Soft carrying case One-year warranty ds: dsc: kts: measuring lead set kpn: TL80A-1 kpn_dash: TL80A kpn_clear: TL80A1 bkpn: FLUKE TL80A-1 bkpn_clear: FLUKE TL80A1 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3971229 sr_ns: FLUKE3971229
r: 02956791 p: 258.842 pid: 72823 b: FLUKE q: 0 st: lt: 6 ean: 0095969079549 sr: FLUKE 1277073 sr_no_br: 1277073 sr_no_br_cl: 1277073 sr_cl: FLUKE1277073 sr_dash: sold: 1811.894 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL81A deluxe electronic measuring lead kit - 1277073 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: The Fluke TL81A Deluxe set of electronic test leads is ideal for measurements on electronic equipment. It offers versatile measurement capabilities with modular measuring probes, alligator clips, measuring clamps and other accessories and can be connected directly to SureGrip measuring leads. The set consists of a four-part nylon carrying case with 11 parts Key features CAT III 300V Suitable for Fluke multimeters and other multimeters that fit standard-sized safety-insulated banana connectors CSA approved One year warranty ds: dsc: Scope of delivery One-metre measuring lead with an angled banana connector with safety insulation at one end and a stainless steel measuring probe at the other, specification up to 10 A. Measurement leads with silicone insulation are more flexible at low temperatures and resistant to high temperatures Insulated alligator clip with specification up to 5 A Insulated measuring probe extension with specification up to 3 A Modular measuring probe with banana plug in handle, specification up to 10 A Modular measuring lead with hook and banana plug, specification up to 5 A Modular measuring lead with pinch clamp and banana plug, specification up to 5 A Modular alligator clip with banana plug, specification up to 5 A Retractable IC measuring pin adapter (specification up to 3 A) and measuring lead connectors Unprotected terminal lug with banana connector, specification up to 10 A kts: deluxe electronic measuring lead kit kpn: TL81A kpn_dash: kpn_clear: TL81A bkpn: FLUKE TL81A bkpn_clear: FLUKE TL81A c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 1277073 sr_ns: FLUKE1277073
r: 02958106 p: 90.041 pid: 72206 b: FLUKE q: 0 st: lt: 12 ean: 0095969261265 sr: FLUKE 2149080 sr_no_br: 2149080 sr_no_br_cl: 2149080 sr_cl: FLUKE2149080 sr_dash: sold: 1800.82 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TP82 insulation piercing pin set - 2149080 cn: TEST CLIP cn2: TEST CLIP cn_clear: TESTCLIP d: Product description: Stainless steel probe penetrates insulation on calibre 14, 16 and 18 wire. You determine needle depth for minimal damage to insulation. Indispensable for use under the bonnet or dashboard. Use this kit for fuel injectors or sensors while the design provides full insulation for grounding. Key features Banana plug socket suitable for all test leads fitted with banana plugs Non-twisting banana plug socket prevents wires from becoming entangled, allowing you to loosen and tighten the clamp while still connected to the test lead Available with a 2 mm input jack Tested up to 60 V DC voltage ds: dsc: kts: insulation piercing pin set kpn: TP82 kpn_dash: kpn_clear: TP82 bkpn: FLUKE TP82 bkpn_clear: FLUKE TP82 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test clip | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test clip sr_no_br_cl_ns: 2149080 sr_ns: FLUKE2149080
r: 02951070 p: 440.261 pid: 71959 b: FLUKE q: 0 st: lt: 21 ean: 0095969692052 sr: FLUKE 4401595 sr_no_br: 4401595 sr_no_br_cl: 4401595 sr_cl: FLUKE4401595 sr_dash: sold: 1761.044 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 0,4 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 3000 FC wireless multimeter - 4401595 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Now compatible with Fluke Connect Mobile App Fluke's 3000 FC series wireless multimeter ensures that instruments and not your body are near live electrical dividers. Increase safety and efficiency with this tester. All the facts, right on site. The Fluke 3000 FC True-RMS wireless multimeter with the Fluke Connect app and ShareLive video call function. Accuracy, reliability and ease of use make the Fluke 3000 FC wireless multimeter the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to investigate and troubleshoot many problems in electrical and electronic systems. The Fluke 3000 FC offers you True-RMS voltage and current measurement functions, 6000-count resolution and manual and automatic range setting. It can also perform frequency, capacitance and resistance measurements as well as dial-through and diode tests. In addition, the Fluke 3000 FC offers a higher base accuracy of 0.09%, a digital display showing up to three secondary remote module readings and a bright white backlight. Work safely near electrical dividers while wearing less personal protective equipment The Fluke 3000 FC True-RMS wireless multimeter and the Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then, at a safe distance, read the results on the 3000 FC wireless multimeter. You can display the meter's readings plus the readings of up to 3 wireless modules, while reducing the risk of arc discharge by staying away from hazardous measurement situations. Even better: the Fluke 3000 FC Series wireless multimeter can send readings to your smartphone, allowing you to store readings on it and share them with your team on site, anytime, anywhere. Don't get caught up chasing interrelated events Timing is all-important when you are trying to find the cause of a complex problem. You often need to measure in one place while looking at activity in another part of the system. We've solved that problem with Fluke Connect - connect your remote modules to a particular location and then measure with the Fluke 3000 FC multimeter up to 20 metres away from that location. You can see the interaction between your remote measurement points on a single screen, in real-time. You can even download the data to a PC for further analysis. Other capabilities of Fluke Connect and the 3000 FC multimeter. Add your laptop and go from logging straight to analysis and diagnosis. Log data over an extended period of time with the Fluke Connect wireless modules and monitor an hour, a shift or a week's worth of circuit load changes. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. Save time, effort and energy with the Fluke 3000FC True-RMS digital multimeter with a set of industrial test leads and a non-contact voltage locator, all in a compact, durable carrying case. Key features: The Fluke 3000 FC has features and functions you need to examine your equipment and installation for faults. True-RMS AC voltage and current for accurate measurements on non-linear loads Large-digit display with analogue bargraph Backlit display for working in dark places Capacity Records minimum and maximum values to support troubleshooting Keep your hands free with the magnetic hanging clip included in this combination kit 3-year warranty Plus, Fluke Connect wireless-compatible modules measure AC, DC and AC+DC voltage, AC and DC current and temperature, all of which are displayed on Fluke's 3000 FC series wireless multimeter. Choose a standard current clamp or a flexible current clamp to measure AC current. Mix and match modules to meet your unique measurement needs. Read the primary measurement value on the main display, and data from up to three modules at the same time. Modules are available individually, or as part of Fluke Connect kits ds: dsc: kts: wireless multimeter kpn: 3000 FC kpn_dash: kpn_clear: 3000FC bkpn: FLUKE 3000 FC bkpn_clear: FLUKE 3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4401595 sr_ns: FLUKE4401595
r: 03346457 p: 581.935 pid: 158590 b: FLUKE q: 0 st: lt: 8 ean: 0195112122648 sr: FLUKE 5593173 sr_no_br: 5593173 sr_no_br_cl: 5593173 sr_cl: FLUKE5593173 sr_dash: sold: 1745.805 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message No Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 283 FC digital multimeter CAT III 1500 V in carrying case - 5593173 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC digital multimeter is ideal for technicians working in DC environments up to 1500 V. Whether you are working with utility-scale solar photovoltaic (PV) arrays, wind power, electric railway lines or data centres, the Fluke 283 FC improves safety and increases productivity while providing accurate, reliable and reproducible results. The 283 FC comes with silicone TwistGuard test leads with safety specification TL175-HV CAT III 1500 V/CAT IV 1000 V for working in higher voltage environments without compromising safety, giving you more flexibility when testing voltage, milli voltage, resistance, continuity or capacitance. The backlit LCD display and backlit keypad make it easier to work in different lighting conditions, while the magnetic suspension kit leaves your hands free during testing. The 283 FC also comes with a custom-made carrying case that protects your investment during transport. Key features Highly accurate voltage measurements for accurate front-line fault finding Current measurements up to 60 A AC/DC for safe and more accurate fault finding in individual sets of modules (when using the optional a283 FC wireless current clamp) Visual and audio polarity indicators with on/off function help prevent wiring problems User-defined limit meter helps you make quick go/no-go decisions when looking for faults Unique multimeter readiness self-test ensures your meter is ready for testing Store and log readings in internal memory and view them on your mobile device via Fluke Connect ds: dsc: Scope of delivery 283 FC TRMS wireless digital multimeter TL175-HV TwistGuard silicone measuring leads Premium protective bag Magnetic suspension strap kts: digital multimeter CAT III 1500 V in carrying case kpn: 283 FC kpn_dash: kpn_clear: 283FC bkpn: FLUKE 283 FC bkpn_clear: FLUKE 283FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5593173 sr_ns: FLUKE5593173
r: 02909133 p: 282.153 pid: 71879 b: FLUKE q: 0 st: lt: 10 ean: 0095969692021 sr: FLUKE 4401563 sr_no_br: 4401563 sr_no_br_cl: 4401563 sr_cl: FLUKE4401563 sr_dash: sold: 1692.918 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T3000FC Type K wireless temperature module - 4401563 cn: THERMOMETER cn2: THERMOMETER cn_clear: THERMOMETER d: Key features: The Fluke t3000 FC wireless temperature module type K wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke t3000 FC wireless temperature module type K enables the following: Use as a standalone gauge or as part of the system Log function to record and store up to 65,000 measured values Product description: All the facts, right on site. The Fluke t3000 FC wireless temperature module type K is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measurement tools ensure that instruments and not your body are near live electrical dividers. It's simple. Connect the t3000 FC wireless temperature module, or any of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. Even better: the Fluke Connect instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Don't get stuck while detecting intermittent electrical faults Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We have solved that problem with Fluke Connect ? leave your remote modules connected to log readings and leave the site to address other problems. You can then download the data for further analysis. Work safely near electrical distributors while wearing less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more t3000 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Cheaper and faster 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect voltage module to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Add your laptop and go from logging straight to analysis and diagnosis. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. The t3000 FC temperature modules enable the following: Detect temperature differences between three phases in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit loads. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery FC wireless temperature module type K Fluke t3000 thermometer with thermocouple 80PK-1 thermocouple, type K, bulb Magnetic suspension strap kts: Type K wireless temperature module kpn: T3000FC kpn_dash: kpn_clear: T3000FC bkpn: FLUKE T3000FC bkpn_clear: FLUKE T3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Thermometer | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke thermometer sr_no_br_cl_ns: 4401563 sr_ns: FLUKE4401563
