r: 02458080 p: 11.428 pid: 121771 b: SOUDAL q: 141 st: 1 lt: 1 ean: 5411183119673 sr: SOUDAL 124715 sr_no_br: 124715 sr_no_br_cl: 124715 sr_cl: SOUDAL124715 sr_dash: sold: 12650.796 p_range: none type: standard act: 1 avo: 1 av: H-statements H334; H412 ADR packing group ADR class UN number Conseils de prudence (P) P261; P273; P284; P304 + P340; P342 + P311; P501 Principal hazard property GHS08 Health hazard Hazard class GHS08 Health hazard Physical state Liquid Flash point >100 °C Packaging Cartridge Colour (manufacturer) Champagne Net volume 310 ml n: SOUDAL Aquaswell polyurethane joint sealant, swells on contact with water (310 ml) - 124715 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudal Aquaswell is a high quality, one component polyurethane sealant which swells up in contact with water to create a water- and gastight seal in pipe- and cable penetrations. Characteristics: Waterand gastight up to 5 bar (DVGW VP-601). Very good adhesion on concrete and many metals, PVC. Very easy application on both horizontal and vertical substrates. Swells up to 450% of its original volume in contact with water. Stays elastic after curing. Returns to its original shape after swelling. Applications: Water sealing pipeand cable penetrations. Water sealing concrete joints. Bonding of water swelling water stop tape onto rough surfaces. Directions for use: Method: caulking gun. Fill the penetration in the concrete structure on each side to 5cm deep using Soudal Aquaswell, according to the application Table (technical datasheet). For large penetrations PU backing rods Should be wrapped around the pipe in the centre of the concrete structure according to the application table. Application temperature: +1°C to +30°C Clean: with white spirit immediately after use. Finishing (optional): with a soapy solution or Soudal Finishing Solution before skin formation. Repair: with the same product. Remarks: In order to ensure the correct performance of the product, Soudal recommends a preliminary adhesion test. ds: dsc: kts: polyurethane joint sealant, swells on contact with water (310 ml) kpn: Aquaswell kpn_dash: kpn_clear: Aquaswell bkpn: SOUDAL Aquaswell bkpn_clear: SOUDAL Aquaswell c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 124715 sr_ns: SOUDAL124715
r: 02673876 p: 40.33 pid: 122087 b: SOUDAL q: 36 st: 1 lt: 1 ean: 5411183161283 sr: SOUDAL 145785 sr_no_br: 145785 sr_no_br_cl: 145785 sr_cl: SOUDAL145785 sr_dash: sold: 12260.32 p_range: none type: standard act: 1 avo: 1 av: Weight 4,5 kg Relative density 1 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight LQ air- and vapour-tight membrane black (4.5 kg) - 145785 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black (4.5 kg) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 145785 sr_ns: SOUDAL145785
r: 11990026 p: 4.244 pid: 107143 b: SOUDAL q: 224 st: 1 lt: 1 ean: 5411183408005 sr: SOUDAL 102668 sr_no_br: 102668 sr_no_br_cl: 102668 sr_cl: SOUDAL102668 sr_dash: sold: 4867.868 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH066 Relative density 1,005 ADR packing group III ADR class 3 Principal hazard property GHS02 Flammable UN number UN3295 Conseils de prudence (P) P101; P102; P210; P261; P271; P312; P405; P501 H-statements H226; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point >31 °C Packaging Cartridge Colour (manufacturer) Black n: SOUDAL Soudafalt bitumen-based jointing sealant black (310 ml) - 102668 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudafalt is a one-component ready to use joint sealant based on bitumen. Characteristics: Easy to apply Good adhesion on bituminous substrates Good adhesion on many substrates, even under water. Excellent slump resistance Applications: Joints with max. movement of 10% Repair product for leaks in roof elements, gutters and sewage pipes Cold adhesive for all types of roofing Emergency repairs, even in rainy weather Directions for use: Method: caulking gun Application temperature: +1°C to +30°C Clean: with white spirit immediately after use Finish: with soapy water before skinning Repair: Soudafalt ds: dsc: kts: bitumen-based jointing sealant black (310 ml) kpn: Soudafalt kpn_dash: kpn_clear: Soudafalt bkpn: SOUDAL Soudafalt bkpn_clear: SOUDAL Soudafalt c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Joint sealant sr_no_br_cl_ns: 102668 sr_ns: SOUDAL102668
r: 02334475 p: 6.641 pid: 123447 b: SOUDAL q: 1 st: 1 lt: 1 ean: 5411183013568 sr: SOUDAL 105089 sr_no_br: 105089 sr_no_br_cl: 105089 sr_cl: SOUDAL105089 sr_dash: sold: 4170.548 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml Relative density 1,4 ADR packing group ADR class EUH-statements EUH210; EUH212 UN number Physical state Solid Flash point >100 °C Packaging Cartridge Color Beige Colour (manufacturer) Beige n: SOUDAL Soudaseal 215Lm Da Beige hybrid facade joint sealant dark beige (600 ml sausage) - 105089 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MS-Polymer. Characteristics: Tested and conform to ISO 11600-F-25LM High bond strength on nearly all surfaces Excellent adhesion and extrudability, even in adverse conditions High performance mechanical properties Almost odourless No bubble formation within sealant, even in wet and humid conditions Primerless adhesion on many substrates (except where water pressure may occur) Colour stable and UV resistant Ecological advantages - free of isocyanates, solvents, halogens and acids Paintable with all water based paints (other systems should be tested) Excellent weather resistance in all climates Applications: Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames, Applications that should be painted with water based paints. Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Surface temperature: >+5°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 215 LM Remarks: Soudaseal 215LM may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Soudaseal 215 LM should not be used as a glazingsealant. ds: dsc: kts: hybrid facade joint sealant dark beige (600 ml sausage) kpn: Soudaseal 215Lm Da Beige kpn_dash: kpn_clear: Soudaseal215LmDaBeige bkpn: SOUDAL Soudaseal 215Lm Da Beige bkpn_clear: SOUDAL Soudaseal215LmDaBeige c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 105089 sr_ns: SOUDAL105089
r: 03213537 p: 39.628 pid: 122121 b: SOUDAL q: 0 st: lt: 9 ean: 5411183161269 sr: SOUDAL 145788 sr_no_br: 145788 sr_no_br_cl: 145788 sr_cl: SOUDAL145788 sr_dash: sold: 4121.312 p_range: none type: standard act: 1 avo: 1 av: Weight 4,5 kg Relative density 1 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight LQ air- and vapour-tight membrane white (4.5 kg) - 145788 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane white (4.5 kg) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 145788 sr_ns: SOUDAL145788
r: 02334379 p: 6.641 pid: 121624 b: SOUDAL q: 8 st: 1 lt: 1 ean: 5411183013537 sr: SOUDAL 102291 sr_no_br: 102291 sr_no_br_cl: 102291 sr_cl: SOUDAL102291 sr_dash: sold: 2868.912 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml Relative density 1,4 ADR packing group ADR class EUH-statements EUH210; EUH212 UN number Physical state Solid Flash point >100 °C Packaging Cartridge Color White Colour (manufacturer) White n: SOUDAL Soudaseal 215LM hybrid facade joint sealant white (600 ml sausage) - 102291 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MS-Polymer. Characteristics: Tested and conform to ISO 11600-F-25LM High bond strength on nearly all surfaces Excellent adhesion and extrudability, even in adverse conditions High performance mechanical properties Almost odourless No bubble formation within sealant, even in wet and humid conditions Primerless adhesion on many substrates (except where water pressure may occur) Colour stable and UV resistant Ecological advantages - free of isocyanates, solvents, halogens and acids Paintable with all water based paints (other systems should be tested) Excellent weather resistance in all climates Applications: Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames, Applications that should be painted with water based paints. Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Surface temperature: >+5°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 215 LM Remarks: Soudaseal 215LM may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Soudaseal 215 LM should not be used as a glazingsealant. ds: dsc: kts: hybrid facade joint sealant white (600 ml sausage) kpn: Soudaseal 215LM kpn_dash: kpn_clear: Soudaseal215LM bkpn: SOUDAL Soudaseal 215LM bkpn_clear: SOUDAL Soudaseal215LM c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 102291 sr_ns: SOUDAL102291
r: 02624775 p: 233.842 pid: 155346 b: TEROSON q: 0 st: lt: 9 ean: 4002872171709 sr: TEROSON 247319 sr_no_br: 247319 sr_no_br_cl: 247319 sr_cl: TEROSON247319 sr_dash: sold: 2806.104 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number Weight 16 kg Principal hazard property GHS08 Health hazard Conseils de prudence (P) P260 H-statements H373 Hazard class GHS08 Health hazard Physical state Solid n: TEROSON Terostat IX kneadable sealant light grey (16kg open bucket with lid) - 247319 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: TEROSON RB IX is a light grey, kneadable putty butyl sealant with slight tackiness and ideal for gap and breakthrough filling. It is formulated for manual application at room temperature and is easy, safe and clean to use. No application equipment or handling precautions are required. This product also provides good water and ageing resistance. Service temperature is -30 to +80°C. ds: dsc: kts: kneadable sealant light grey (16kg open bucket with lid) kpn: Terostat IX kpn_dash: kpn_clear: TerostatIX bkpn: TEROSON Terostat IX bkpn_clear: TEROSON TerostatIX c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson adhesives and sealants / Teroson adhesives and sealants / Teroson sealant sr_no_br_cl_ns: 247319 sr_ns: TEROSON247319
r: 02067381 p: 25.578 pid: 155557 b: TEROSON q: 0 st: lt: 1 ean: 4002872013412 sr: TEROSON 1359348 sr_no_br: 1359348 sr_no_br_cl: 1359348 sr_cl: TEROSON1359348 sr_dash: sold: 2097.396 p_range: none type: standard act: 1 avo: 1 av: Relative density 1,7 ADR packing group ADR class UN number Weight 1 kg Principal hazard property GHS08 Health hazard Conseils de prudence (P) P260 H-statements H373 Hazard class GHS08 Health hazard Physical state Solid Packaging Jar n: TEROSON Terostat IX kneadable sealant light grey (1kg tin) - 1359348 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: TEROSON RB IX is a light grey, kneadable putty butyl sealant with slight tackiness and ideal for gap and breakthrough filling. It is formulated for manual application at room temperature and is easy, safe and clean to use. No application equipment or handling precautions are required. This product also provides good water and ageing resistance. Service temperature is -30 to +80°C. ds: dsc: kts: kneadable sealant light grey (1kg tin) kpn: Terostat IX kpn_dash: kpn_clear: TerostatIX bkpn: TEROSON Terostat IX bkpn_clear: TEROSON TerostatIX c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson adhesives and sealants / Teroson adhesives and sealants / Teroson sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 1359348 sr_ns: TEROSON1359348
r: 02334121 p: 4.641 pid: 121775 b: SOUDAL q: 2 st: 1 lt: 1 ean: 5411183002913 sr: SOUDAL 104530 sr_no_br: 104530 sr_no_br_cl: 104530 sr_cl: SOUDAL104530 sr_dash: sold: 1656.837 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Relative density 1,353 ADR packing group ADR class EUH-statements EUH208; EUH210 UN number Physical state Liquid Packaging Cartridge Color White Colour (manufacturer) White n: SOUDAL Soudafill acrylic filler (310 ml) - 104530 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudafill is a high-quality, plasto-elastic one-component joint sealant based on acrylic dispersions. Characteristics: Easy to wash into cracks Can be painted over directly with masonry paint Can be painted over after curing Very good adhesion on many porous surfaces Applications: Sealing compound for cracks in concrete and plaster Joints between windowsills, between skirtingboard and floor, between brickwork, etc. Directions for use: Method: Apply the sealant, in case of repairing cracks in plaster or concrete, by means of a handheld or pneumatic caulking gun. Paint over Directly with masonry paint or smoothen with a wet Sponge. Apply the sealant, in case of sealing joints, by means of a handheld or pneumatic caulking gun. Smoothen the sealant with a filling-knife. Application temperature: +5°C to +30°C, do not apply when rain or frost are imminent Clean: Uncured Soudafill may be removed from tools with water. Cured sealant must be removed mechanically. Finishing: with soapy water Repair: with Soudafill Remarks: Do not use in applications where continuous water immersion is possible. Do not apply when rain or frost is imminent Soudafill can be painted over with most paints. The paint should be sufficiently elastic to be applied on a plasto- elastic sealant. A preliminary test is recommended. ds: dsc: kts: acrylic filler (310 ml) kpn: Soudafill kpn_dash: kpn_clear: Soudafill bkpn: SOUDAL Soudafill bkpn_clear: SOUDAL Soudafill c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 104530 sr_ns: SOUDAL104530
r: 03203996 p: 76.198 pid: 154953 b: TEC7 q: 0 st: lt: 6 ean: 5414195011737 sr: TEC7 602060000 sr_no_br: 602060000 sr_no_br_cl: 602060000 sr_cl: TEC7602060000 sr_dash: sold: 1371.564 p_range: none type: standard act: 1 avo: 1 av: Net volume 4,4 l ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point 64 °C n: TEC7 WP7-402 wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) - 602060000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description WALL INJECTION CREAM Water-repellent barrier in walls Easy application without waste, gun or pressure Even for walls with 95% moisture content Safe, solvent-free and odourless This final solution against rising damp forms a water-repellent, horizontal barrier in walls For all types of brick and rapid construction brick, even hollow ones Can be used as a joint sealant in solid natural stone walls Applicable inside and outside WTCB AAA+ Instructions Remove skirting boards, cover plates of sockets and all plastering up to 25 cm above the visible moisture attack or salt efflorescence Drill a 12 mm diameter hole every 10 cm. The depth is the wall thickness minus 5 cm For fastest effectiveness, drill into the lowest horizontal cement joint, above the ground surface outside Inject double walls and walls thicker than 40 cm inside and outside at the same height For very porous stone such as sandstone, ironstone or some types of limestone: it is best to also inject the stone itself. Follow the lowest joint in natural stone. If there is an old water barrier, drill below that level Drill several star-shaped holes in corners for complete impregnation Remove all drilling dust from the holes Screw the injection hose onto the sausage. Insert the hose into the drill holes to the back and fill with a slow retreating motion Leave the last cm unfilled Seal the holes with Tec7 Filler After a few days to weeks (depending on how dry the wall is) a +/- 10 cm thick water-repellent layer will have been formed across the entire width of the wall. The wall will take longer to dry, depending on the thickness of the wall, the weather conditions and the moisture content If necessary, measure the evolution with a moisture meter If the walls do not dry, or stains appear at normal humidity, there is heavy salt stress. This can be remedied by a wall treatment with WP7-501 Wall + Basement Waterproofing Penetrating driving rain that prevents drying can be remedied by facade treatment with WP7- 401 Facade Waterproof Wait to finish until the walls are thoroughly dry. Good ventilation promotes the drying process. Wait at least two weeks before installing a construction dryer if necessary Do not install a retaining wall to prevent moisture problems in the form of corrosion, deterioration of the walls and severe mould or occurrence of house fungus ds: dsc: kts: wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) kpn: WP7-402 kpn_dash: WP7 kpn_clear: WP7402 bkpn: TEC7 WP7-402 bkpn_clear: TEC7 WP7402 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant sr_no_br_cl_ns: 602060000 sr_ns: TEC7602060000
r: 11991528 p: 2.61 pid: 105773 b: RECTAVIT q: 0 st: lt: 4 ean: 5412926095834 sr: RECTAVIT 114054 sr_no_br: 114054 sr_no_br_cl: 114054 sr_cl: RECTAVIT114054 sr_dash: sold: 1315.44 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Relative density 1,5 ADR packing group ADR class UN number EUH-statements EUH208; EUH210 Physical state Liquid Packaging Cartridge Color White Colour (manufacturer) White n: RECTAVIT Recta-Mastic 90 acrylic paint sealant for interior applications white (310 ml) - 114054 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description Paintable acrylic sealant for indoor and outdoor applications. Paintable after 10 min. Application Filling of joints, cracks and fissures indoors Characteristics Good adhesion on all common porous substrates in the building industry, but also on aluminium Easy to process and smoothen Good colour fastness and rapid skin formation Watertight finish Paintable with most paint systems For interior applications ds: dsc: Scope of delivery Canister: 310 ml kts: acrylic paint sealant for interior applications white (310 ml) kpn: Recta-Mastic 90 kpn_dash: Recta kpn_clear: RectaMastic90 bkpn: RECTAVIT Recta-Mastic 90 bkpn_clear: RECTAVIT RectaMastic90 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Rectavit / Rectavit technical and chemical products / Rectavit adhesives and sealants / Rectavit adhesives and sealants / Rectavit sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 114054 sr_ns: RECTAVIT114054
r: 02780960 p: 12.066 pid: 125160 b: SOUDAL q: 0 st: lt: 4 ean: 5411183129757 sr: SOUDAL 128138 sr_no_br: 128138 sr_no_br_cl: 128138 sr_cl: SOUDAL128138 sr_dash: sold: 1158.336 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Conseils de prudence (P) P101; P102; P210; P261; P271; P301 + P310 + P331; P312; P405; P501 ADR packing group III ADR class 3 UN number UN1139 EUH-statements EUH066 Principal hazard property GHS02 Flammable H-statements H226; H304; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point 40 °C Packaging Cartridge Color Colourless Colour (manufacturer) Transparent n: SOUDAL Aluseal sealant for mitre joints (310 ml) - 128138 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: TRANSPARENT synthetic rubber based sealant coating for the protection of cut alumium window mitre joints. Non-aggressive to lacquers or coatings used in the fabrication of windows. Highly elastic and UV resistant. Compatible with window fabrication adhesives - Soudabond 641 and Soudabond 642. Can also be used with Tekna TK259 machine. Characteristics: Synthetic rubber sealant and coating for aluminium windows UV resistant Highly elastic Compatible with Soudabond 641 & 642 adhesives Can be used with Tekna TK259 machine Applications: Corrosion protection of cut alumium profiles (mitre joints) and general sealing (weather, water, air) of assembled aluminium windows. ds: dsc: kts: sealant for mitre joints (310 ml) kpn: Aluseal kpn_dash: kpn_clear: Aluseal bkpn: SOUDAL Aluseal bkpn_clear: SOUDAL Aluseal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 128138 sr_ns: SOUDAL128138
r: 02098394 p: 6.27 pid: 123225 b: SOUDAL q: 12 st: 1 lt: 1 ean: 5411183036017 sr: SOUDAL 108264 sr_no_br: 108264 sr_no_br_cl: 108264 sr_cl: SOUDAL108264 sr_dash: sold: 1141.14 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number EUH-statements EUH210 Physical state Liquid Packaging Cartridge Colour (manufacturer) Black Net volume 310 ml n: SOUDAL Firecement HT heat-resistant sealant, fully curing (310 ml) - 108264 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Firecement HT is a single component ready to use heat resistant sealant which cures to form a hard seal. It withstands temperatures of up to 1500°C. Characteristics: Heat resistant up to 1500°C Does not contain asbesto or other harmful components Hard setting Does not crumble or crack after cure Fire Rating of 120 minutes (Test Report 7830) Applications: Sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc.Heat retardant sealing at existing constructions Directions for use: Method: caulking gun, spatula, trowel Application temperature: +5°C to +30°C Clean: with water Repair: with Firecement HT° Remarks: A slight heating up of the installation during 12 hours after application of the Firecement HT° will prevent the forming of bubbles and improve the sealant structure Do not apply in situations where constant water immersion is possible ds: dsc: kts: heat-resistant sealant, fully curing (310 ml) kpn: Firecement HT kpn_dash: kpn_clear: FirecementHT bkpn: SOUDAL Firecement HT bkpn_clear: SOUDAL FirecementHT c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 108264 sr_ns: SOUDAL108264
r: 11990183 p: 2.88 pid: 105772 b: ZWALUW q: 0 st: lt: 8 ean: 8711595008426 sr: ZWALUW 30620367 sr_no_br: 30620367 sr_no_br_cl: 30620367 sr_cl: ZWALUW30620367 sr_dash: sold: 1140.48 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Conseils de prudence (P) P210; P233; P241; P280; P370 + P378; P403 + P235; P501 ADR packing group III ADR class 3 UN number UN1133 EUH-statements EUH066 Principal hazard property GHS02 Flammable H-statements H226 Hazard class GHS02 Flammable Physical state Liquid Flash point 56 °C Packaging Cartridge Color Black Colour (manufacturer) Black n: ZWALUW Den Braven TIXOPLAST 1K sealant black (310 ml cartridge) - 30620367 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product Description: Zwaluw Tixoplast is a 1-component bitumen based sealant which cures to a plastic seal by evaporation of the solvent. Application: Zwaluw Tixoplast was developed as an adhesive for bituminous roofing and insulation panels (not of polystyrene), weatherproof sealing of joints, eaves, gutters, skylights, chimneys, etc. Zwaluw Tixoplast can also be used as sealing for leaks, emergency repairs even in wet weather. Also for filling of cracks, joints and blisters on roofs and gutters in roofing, zinc and to adhere shingles to sloped roofs. Characteristics Shelf life Store between +5°C and +25°C and in shaded conditions. Shelf life is up to 9 months when stored as recommended in original unopened packaging. ds: dsc: kts: 1K sealant black (310 ml cartridge) kpn: Den Braven TIXOPLAST kpn_dash: kpn_clear: DenBravenTIXOPLAST bkpn: ZWALUW Den Braven TIXOPLAST bkpn_clear: ZWALUW DenBravenTIXOPLAST c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw adhesives and sealants / Zwaluw adhesives and sealants / Zwaluw sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 30620367 sr_ns: ZWALUW30620367
r: 03220834 p: 5.24 pid: 122152 b: ZWALUW q: 0 st: lt: 9 ean: 8711595038386 sr: ZWALUW 30880054 sr_no_br: 30880054 sr_no_br_cl: 30880054 sr_cl: ZWALUW30880054 sr_dash: sold: 1131.84 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Relative density 1,95 - 2,05 ADR packing group ADR class Principal hazard property GHS05 Corrosive UN number Conseils de prudence (P) P101; P102; P280; P302 + P352; P305 + P351 + P338; P310; P501 H-statements H315; H318 Hazard class GHS05 Corrosive Physical state Solid Packaging Cartridge Colour (manufacturer) Black n: ZWALUW Den Braven FIRE SEALANT 1200°C heat resistant sealant black (310 ml tube) - 30880054 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product Description: Zwaluw Fire Sealant 1200°C is a pasty product that cures by drying to a hard, high temperature resistant seal. Advantages Resistant to high temperatures up to 1200°C Bonding and joining temperature resistant stones Application: Zwaluw Fire Sealant 1200°C was developed for sealing joints in heaters, open fire places and ovens. Fire Sealant 1200°C is a hardening, non-elastic product suitable for applications where no movement occurs. Characteristics Shelf life In unopened original packaging between +5°C and +25°C, shelf life up to 9 months from date of production, stored in a dry place. ds: dsc: kts: heat resistant sealant black (310 ml tube) kpn: Den Braven FIRE SEALANT 1200°C kpn_dash: kpn_clear: DenBravenFIRESEALANT1200C bkpn: ZWALUW Den Braven FIRE SEALANT 1200°C bkpn_clear: ZWALUW DenBravenFIRESEALANT1200C c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw adhesives and sealants / Zwaluw adhesives and sealants / Zwaluw sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 30880054 sr_ns: ZWALUW30880054
r: 01040529 p: 3.806 pid: 123203 b: SOUDAL q: 30 st: 1 lt: 1 ean: 5411183002906 sr: SOUDAL 100127 sr_no_br: 100127 sr_no_br_cl: 100127 sr_cl: SOUDAL100127 sr_dash: sold: 1069.486 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml Relative density 1 ADR packing group ADR class EUH-statements EUH210 UN number Physical state Liquid Packaging Cartridge Color Black Colour (manufacturer) Black n: SOUDAL Calofer heat-resistant sealant stove sealant (300 ml) - 100127 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Calofer is a high quality sealing paste based which cures to form a hard joint which withstand temperatures of up to 1500°C Characteristics: Ready for use Does not crumble or crack after hardening Heat resistant until 1500°C Free of asbesto Applications: Sealing of joints and openings at high temperature areas Intallation of heating systems, furnaces, etc. Directions for use: Type: concrete, metal, bricks State of Surface: clean, free of dust and grease Preparation: slight moistening of the surface increases adhesion We recommend a preliminary compatibility test. ds: dsc: kts: heat-resistant sealant stove sealant (300 ml) kpn: Calofer kpn_dash: kpn_clear: Calofer bkpn: SOUDAL Calofer bkpn_clear: SOUDAL Calofer c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 100127 sr_ns: SOUDAL100127
r: 02956385 p: 4.57 pid: 155299 b: TEC7 q: 0 st: lt: 6 ean: 5414195005392 sr: TEC7 528100000 sr_no_br: 528100000 sr_no_br_cl: 528100000 sr_cl: TEC7528100000 sr_dash: sold: 1041.96 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point > 150 °C Packaging Cartridge Net volume 310 ml n: TEC7 Tecryl professional painting sealant for filling and joints white paintable (310 ml) - 528100000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description PROFESSIONAL PAINTING SEALANT Tec7-quality acrylic sealant Almost odourless Easy to finish Paintable after 1 hour Compatible with all paints and lacquers Highly resistant to moisture and condensation Safe on all building materials Tecryl is a professional acrylic sealant for sealing and filling all building materials The formulation guarantees a perfect finish with all types of paint, stain or varnish: with little or no risk of reactions such as paint cracking or discolouration Tecryl cures to a plastic consistency that perfectly follows the expansion and movement of the substrate, but does not dissolve or crack Instructions Apply to clean and dry to slightly moist substrate Spread dry or wet with spatula Can be repainted after 1 hour, depending on temperature and humidity. Remove any protective tape before skin formation to prevent damage to it Use X-Seal for expansion joints Improve adhesion and strengthen weak substrates such as aerated concrete or plaster by coating with diluted Tecryl (2 parts water to 1 part Tecryl) Test the adhesion on plastics, powder paints, exotic woods, bluestone And bituminous materials The perfect joint is as deep as it is wide (from 5 to 10 mm) The drying time depends on: the temperature of the product, the temperature of the environment, the temperature of the substrate, the layer thickness, the humidity of the substrate Do not use as glass sealant or as adhesive sealant. Not suitable for joints with standing water or with immersion Use XealPro as a sealant for wet joints in showers, baths and sanitary rooms ds: dsc: kts: professional painting sealant for filling and joints white paintable (310 ml) kpn: Tecryl kpn_dash: kpn_clear: Tecryl bkpn: TEC7 Tecryl bkpn_clear: TEC7 Tecryl c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 528100000 sr_ns: TEC7528100000
r: 02370875 p: 7.29 pid: 55727 b: ZWALUW q: 0 st: lt: 8 ean: 8711595163217 sr: ZWALUW 31000550 sr_no_br: 31000550 sr_no_br_cl: 31000550 sr_cl: ZWALUW31000550 sr_dash: sold: 962.28 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml ADR packing group ADR class EUH-statements EUH208; EUH210 UN number Physical state Solid Flash point > 66 °C Packaging Sausage Color Black Colour (manufacturer) Black n: ZWALUW Den Braven HYBRISEAL FACADE hybrid sealant black (600 ml sausage) - 31000550 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product Description: Zwaluw Hybriseal Façade is a high quality professional universal low modulus sealant based on hybrid technology, which cures under influence of humidity to form a durable elastic rubber. Advantages Perfect adhesion without primer to most, even damp, surfaces Low modulus Neutral curing, almost odourless Free of isocyanates, solvents and silicones No shrinkage and bubble free Good resistance to UV, water and weather Permanently elastic High mechanical resistance Application: Zwaluw Hybriseal Façade was specifically developed as a universal sealant for sealing construction and dilatation joints and joints in pedestrian walkways on most common building materials such as concrete, brickwork, painted wood, enamel, aluminium, stainless steel and a variety of plastics. Characteristics Shelf life In unopened original packaging between +5°C and +25°C, shelf life up to 15 months from production date, stored in a dry place. ds: dsc: kts: hybrid sealant black (600 ml sausage) kpn: Den Braven HYBRISEAL FACADE kpn_dash: kpn_clear: DenBravenHYBRISEALFACADE bkpn: ZWALUW Den Braven HYBRISEAL FACADE bkpn_clear: ZWALUW DenBravenHYBRISEALFACADE c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw adhesives and sealants / Zwaluw adhesives and sealants / Zwaluw sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 31000550 sr_ns: ZWALUW31000550
r: 08076835 p: 3.08 pid: 122684 b: ZWALUW q: 0 st: lt: 8 ean: 8711595112192 sr: ZWALUW 30880048 sr_no_br: 30880048 sr_no_br_cl: 30880048 sr_cl: ZWALUW30880048 sr_dash: sold: 828.52 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml ADR packing group ADR class EUH-statements EUH208; EUH210 UN number Physical state Solid Packaging Cartridge Color Grey Colour (manufacturer) Cement grey n: ZWALUW Den Braven JOINT FIX joint repair agent for masonry grey (310 ml tube) - 30880048 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product Description: Zwaluw Joint Fix is a high quality hardening joint repair filler based on acrylic dispersion for masonry joints in interior and exterior walls. Advantages Ready to use repair mortar Paintable with water based and synthetic paints Perfect adhesion without use of a primer on most, even slightly damp substrates Interior and exterior (*) uses Almost odourless Easy to apply and clean Non corrosive towards metals Application: Zwaluw Joint Fix was specifically developed for durable joining and repairs of new and damaged joints between stone strips and brickwork. Zwaluw Joint Fix is weather and rain resistant a few hours after application. Also for connection joints between lead and brickwork. Characteristics Shelf life In unopened original packaging between +5°C and +25°C, shelf life is up to 12 months from production date, stored in a dry place. ds: dsc: kts: joint repair agent for masonry grey (310 ml tube) kpn: Den Braven JOINT FIX kpn_dash: kpn_clear: DenBravenJOINTFIX bkpn: ZWALUW Den Braven JOINT FIX bkpn_clear: ZWALUW DenBravenJOINTFIX c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw adhesives and sealants / Zwaluw adhesives and sealants / Zwaluw sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 30880048 sr_ns: ZWALUW30880048
