SKF 6202-2RSH single-row groove ball bearing cylindrical 15x35x11 mm

Supplier number: SKF 6202-2RSH | EAN 7316571817347

2 review(s)

13.00 tax incl.

€10.74 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable rotation with Skf 6202-2RSH

Practical benefits

Maximum protection against contaminants: With rubber seals on both sides, you keep lubricant in and dirt out to significantly extend service life.
Smooth and quiet operation: You benefit from low friction and reduced vibration, enabling your equipment to run smoothly at high rotational speeds.
Versatile bidirectional load capacity: The single-row deep groove design reliably accommodates both radial and axial loads in either direction.

In a nutshell

The right choise for

With the Skf 6202-2RSH deep groove ball bearing, you ensure smooth, quiet, and dependable rotation for your machinery and shafts. This single-row bearing with dimensions of 15X35X11 mm and a cylindrical bore reliably accommodates both radial and axial loads in either direction. Fitted with contact rubber seals on both sides, it keeps the factory-filled grease inside while locking out dirt, dust, and moisture. This minimizes friction and vibration, significantly extending the service life of electric motors, pumps, and belt drives. With standard normal radial clearance (CN), it is ready for immediate mounting right out of the box.

Product information FAQ Reviews

€13.00

In stock - tax incl.

Key features according to our expert

Inner diameter: 15 mm
Width: 11 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Radial clearance: CN (Normal)
Material (bearing): Steel
Material (cage): Brass (sheet)
Bore type: Cylindrical
High temperature: No
Outer diameter: 35 mm

Product description

Single row deep groove ball bearings with seals on one or both sides are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

Integral sealing prolongs bearing service life
Simple, versatile and robust design
Low friction and high-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 15 mm
Width: 11 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Radial clearance: CN (Normal)
Material (bearing): Steel
Material (cage): Brass (sheet)
Bore type: Cylindrical
High temperature: No
Outer diameter: 35 mm
Matched arrangement: No
Tolerance class: Normal
Radial internal clearance: CN
Basic static load rating: 3.75
Material, bearing: Bearing steel
Relubrication feature: Without
Skf performance class: SKF Explorer
Lubricant: Grease
Sealing type: Contact
Cage: Sheet metal
Locating feature, bearing outer ring: None
Filling slots: Without
Coating: Without
Sealing: Seal on both sides
Limiting speed: 13000
Bore diameter: 15
Basic dynamic load rating: 8.06
Outside diameter: 35

Brand SKF
01010192
EAN 7316571817347
Supplier number SKF 6202-2RSH

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this SKF ball bearing?: The bearing has an inside diameter of 15 mm, an outside diameter of 35 mm, and a width of 11 mm.
What protection does the 2RSH sealing provide?: The contact rubber seals on both sides retain the grease lubricant and keep dust, dirt, and moisture out.
Does this deep groove ball bearing require greasing before installation?: No, the bearing comes pre-lubricated with grease from the factory and is ready to install.
What radial internal clearance does this bearing have?: This bearing features standard normal radial internal clearance (CN).
Is the bore cylindrical or tapered?: This deep groove ball bearing has a cylindrical bore for standard shaft mounting.