Shaft seal

_

SKF G 18X24X3 radial shaft seal 18 mm x 24 mm x 3 mm

• Inner diameter: 18 mm
• Outer diameter: 24 mm
• Width: 3 mm

On stock, immediately available.

5.94

€4.91 excl. VAT

[SEARCH SCORE
Sold desc:
1, 171.85, 4.91 ]
query took: 1781047046.683

layer :



r: 01310156
p: 4.91
pid: 85298
b: SKF
q: 17
st: 1
lt: 1
ean: 7316571365923
sr: SKF G 18X24X3
sr_no_br: G 18X24X3
sr_no_br_cl: G18X24X3
sr_cl: SKFG18X24X3
sr_dash:
sold: 171.85
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 18 mm Outer diameter 24 mm Width 3 mm
n: SKF G 18X24X3 radial shaft seal 18 mm x 24 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 18 mm x 24 mm x 3 mm
kpn: G 18X24X3
kpn_dash:
kpn_clear: G18X24X3
bkpn: SKF G 18X24X3
bkpn_clear: SKF G18X24X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G18X24X3
sr_ns: SKFG18X24X3

_

SKF G 20X26X4 radial shaft seal 20 mm x 26 mm x 4 mm

• Inner diameter: 20 mm
• Outer diameter: 26 mm
• Width: 4 mm

On stock, immediately available.

5.35

€4.42 excl. VAT

[SEARCH SCORE
Sold desc:
1, 61.88, 4.42 ]
query took: 1781047046.6831

layer :



r: 01310159
p: 4.42
pid: 85301
b: SKF
q: 19
st: 1
lt: 1
ean: 7316570685770
sr: SKF G 20X26X4
sr_no_br: G 20X26X4
sr_no_br_cl: G20X26X4
sr_cl: SKFG20X26X4
sr_dash:
sold: 61.88
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 20 mm Outer diameter 26 mm Width 4 mm
n: SKF G 20X26X4 radial shaft seal 20 mm x 26 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 20 mm x 26 mm x 4 mm
kpn: G 20X26X4
kpn_dash:
kpn_clear: G20X26X4
bkpn: SKF G 20X26X4
bkpn_clear: SKF G20X26X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G20X26X4
sr_ns: SKFG20X26X4

_

SKF G 30X37X4 radial shaft seal 30 mm x 37 mm x 4 mm

• Inner diameter: 30 mm
• Outer diameter: 37 mm
• Width: 4 mm

On stock, immediately available.

6.93

€5.73 excl. VAT

[SEARCH SCORE
Sold desc:
1, 40.11, 5.73 ]
query took: 1781047046.6831

layer :



r: 01310162
p: 5.73
pid: 84305
b: SKF
q: 23
st: 1
lt: 1
ean: 7316570109306
sr: SKF G 30X37X4
sr_no_br: G 30X37X4
sr_no_br_cl: G30X37X4
sr_cl: SKFG30X37X4
sr_dash:
sold: 40.11
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 30 mm Outer diameter 37 mm Width 4 mm
n: SKF G 30X37X4 radial shaft seal 30 mm x 37 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Avantages Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 30 mm x 37 mm x 4 mm
kpn: G 30X37X4
kpn_dash:
kpn_clear: G30X37X4
bkpn: SKF G 30X37X4
bkpn_clear: SKF G30X37X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G30X37X4
sr_ns: SKFG30X37X4

_

SKF G 25X35X4 radial shaft seal 25 mm x 35 mm x 4 mm

• Inner diameter: 25 mm
• Outer diameter: 35 mm
• Width: 4 mm

On stock, immediately available.

6.88

€5.69 excl. VAT

[SEARCH SCORE
Sold desc:
1, 34.14, 5.69 ]
query took: 1781047046.6831

layer :



r: 01310004
p: 5.69
pid: 83342
b: SKF
q: 18
st: 1
lt: 1
ean: 7316570877250
sr: SKF G 25X35X4
sr_no_br: G 25X35X4
sr_no_br_cl: G25X35X4
sr_cl: SKFG25X35X4
sr_dash:
sold: 34.14
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 25 mm Outer diameter 35 mm Width 4 mm
n: SKF G 25X35X4 radial shaft seal 25 mm x 35 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 25 mm x 35 mm x 4 mm
kpn: G 25X35X4
kpn_dash:
kpn_clear: G25X35X4
bkpn: SKF G 25X35X4
bkpn_clear: SKF G25X35X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G25X35X4
sr_ns: SKFG25X35X4

_

SKF G 35X42X4 radial shaft seal 35 mm x 42 mm x 4 mm

• Inner diameter: 35 mm
• Outer diameter: 42 mm
• Width: 4 mm

On stock, immediately available.

7.54

€6.23 excl. VAT

[SEARCH SCORE
Sold desc:
1, 24.92, 6.23 ]
query took: 1781047046.6831

layer :



r: 01310167
p: 6.23
pid: 84308
b: SKF
q: 5
st: 1
lt: 1
ean: 7316570436082
sr: SKF G 35X42X4
sr_no_br: G 35X42X4
sr_no_br_cl: G35X42X4
sr_cl: SKFG35X42X4
sr_dash:
sold: 24.92
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 35 mm Outer diameter 42 mm Width 4 mm
n: SKF G 35X42X4 radial shaft seal 35 mm x 42 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 35 mm x 42 mm x 4 mm
kpn: G 35X42X4
kpn_dash:
kpn_clear: G35X42X4
bkpn: SKF G 35X42X4
bkpn_clear: SKF G35X42X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G35X42X4
sr_ns: SKFG35X42X4

_

SKF G 12X16X3 radial shaft seal 12 mm x 16 mm x 3 mm

• Inner diameter: 12 mm
• Outer diameter: 16 mm
• Width: 3 mm

On stock, immediately available.

5.69

€4.70 excl. VAT

[SEARCH SCORE
Sold desc:
1, 23.5, 4.7 ]
query took: 1781047046.6831

layer :



r: 01310144
p: 4.7
pid: 85293
b: SKF
q: 47
st: 1
lt: 1
ean: 7316570799026
sr: SKF G 12X16X3
sr_no_br: G 12X16X3
sr_no_br_cl: G12X16X3
sr_cl: SKFG12X16X3
sr_dash:
sold: 23.5
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 12 mm Outer diameter 16 mm Width 3 mm
n: SKF G 12X16X3 radial shaft seal 12 mm x 16 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Avantages Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 12 mm x 16 mm x 3 mm
kpn: G 12X16X3
kpn_dash:
kpn_clear: G12X16X3
bkpn: SKF G 12X16X3
bkpn_clear: SKF G12X16X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G12X16X3
sr_ns: SKFG12X16X3

_

SKF G 22X30X4 radial shaft seal 22 mm x 30 mm x 4 mm

• Inner diameter: 22 mm
• Outer diameter: 30 mm
• Width: 4 mm

Delivery time average 12 days.

11.18

€9.24 excl. VAT

[SEARCH SCORE
Sold desc:
1, 18.48, 9.24 ]
query took: 1781047046.6831

layer :



r: 01310161
p: 9.24
pid: 85738
b: SKF
q: 0
st:
lt: 10
ean: 7316571084688
sr: SKF G 22X30X4
sr_no_br: G 22X30X4
sr_no_br_cl: G22X30X4
sr_cl: SKFG22X30X4
sr_dash:
sold: 18.48
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 22 mm Outer diameter 30 mm Width 4 mm
n: SKF G 22X30X4 radial shaft seal 22 mm x 30 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 22 mm x 30 mm x 4 mm
kpn: G 22X30X4
kpn_dash:
kpn_clear: G22X30X4
bkpn: SKF G 22X30X4
bkpn_clear: SKF G22X30X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G22X30X4
sr_ns: SKFG22X30X4

_

SKF G 45X52X4 radial shaft seal 45 mm x 52 mm x 4 mm

• Inner diameter: 45 mm
• Outer diameter: 52 mm
• Width: 4 mm

On stock, immediately available.

8.62

€7.12 excl. VAT

[SEARCH SCORE
Sold desc:
1, 14.24, 7.12 ]
query took: 1781047046.6832

layer :



r: 01310173
p: 7.12
pid: 9057
b: SKF
q: 28
st: 1
lt: 1
ean: 7316571063409
sr: SKF G 45X52X4
sr_no_br: G 45X52X4
sr_no_br_cl: G45X52X4
sr_cl: SKFG45X52X4
sr_dash:
sold: 14.24
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 45 mm Outer diameter 52 mm Width 4 mm
n: SKF G 45X52X4 radial shaft seal 45 mm x 52 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 45 mm x 52 mm x 4 mm
kpn: G 45X52X4
kpn_dash:
kpn_clear: G45X52X4
bkpn: SKF G 45X52X4
bkpn_clear: SKF G45X52X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G45X52X4
sr_ns: SKFG45X52X4

_

SKF G 32X42X4 radial shaft seal 32 mm x 42 mm x 4 mm

• Inner diameter: 32 mm
• Outer diameter: 42 mm
• Width: 4 mm

On stock, immediately available.

Recommended Retail Price €15.05

7.40

€6.11 excl. VAT

[SEARCH SCORE
Sold desc:
1, 12.23, 6.115 ]
query took: 1781047046.6832

layer :



r: 01310077
p: 6.115
pid: 84031
b: SKF
q: 9
st: 1
lt: 1
ean: 7316570682960
sr: SKF G 32X42X4
sr_no_br: G 32X42X4
sr_no_br_cl: G32X42X4
sr_cl: SKFG32X42X4
sr_dash:
sold: 12.23
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 32 mm Outer diameter 42 mm Width 4 mm
n: SKF G 32X42X4 radial shaft seal 32 mm x 42 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 32 mm x 42 mm x 4 mm
kpn: G 32X42X4
kpn_dash:
kpn_clear: G32X42X4
bkpn: SKF G 32X42X4
bkpn_clear: SKF G32X42X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G32X42X4
sr_ns: SKFG32X42X4

_

SKF G 28X35X4 radial shaft seal 28 mm x 35 mm x 4 mm

• Inner diameter: 28 mm
• Outer diameter: 35 mm
• Width: 4 mm

On stock, immediately available.

13.75

€11.36 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 11.36 ]
query took: 1781047046.6832

layer :



r: 01310040
p: 11.36
pid: 84026
b: SKF
q: 7
st: 1
lt: 1
ean: 7316571141312
sr: SKF G 28X35X4
sr_no_br: G 28X35X4
sr_no_br_cl: G28X35X4
sr_cl: SKFG28X35X4
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 28 mm Outer diameter 35 mm Width 4 mm
n: SKF G 28X35X4 radial shaft seal 28 mm x 35 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 28 mm x 35 mm x 4 mm
kpn: G 28X35X4
kpn_dash:
kpn_clear: G28X35X4
bkpn: SKF G 28X35X4
bkpn_clear: SKF G28X35X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G28X35X4
sr_ns: SKFG28X35X4