What type of bearings is this G-design seal intended for?

This low cross-sectional height seal is designed for bearing arrangements that incorporate needle roller bearings.

What material is used for this seal?

The sealing lip is made of nitrile rubber (NBR) and reinforced with sheet steel.

Does this shaft seal include a garter spring?

No, the SKF G-design is a contact seal with a single lip constructed without a garter spring.

SKF G 12X16X3 radial shaft seal 12 mm x 16 mm x 3 mm

Supplier number: SKF G 12X16X3 | EAN 7316570799026

5.69 tax incl.

€4.70 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Compact sealing for needle bearings

Practical benefits

Reliable protection with Skf: This radial shaft seal retains lubricant effectively and prevents external contaminants from entering your needle roller bearing.
Extremely low cross section: With a narrow width of 3 mm, you easily fit this seal into space-restricted bearing assemblies.
Secure and stable fit: The steel reinforcement and rubber outer diameter provide a tight seal in the bore while preventing damage during installation.

In a nutshell

The right choise for

With the Skf g 12X16X3 radial shaft seal, you reliably protect needle roller bearings from contaminants and prevent lubricant leakage in demanding applications. Featuring a compact G-design, this seal has an inside diameter of 12 mm, an outside diameter of 16 mm, and a narrow width of 3 mm, allowing you to install it easily in space-constrained bearing arrangements. The single sealing lip made of nitrile rubber (NBR) operates without a garter spring and is reinforced with sheet steel and a rubber outer diameter. This ensures a firm fit in the housing bore while reducing the risk of damage during installation.

Product information FAQ

€5.69

In stock - tax incl.

Key features according to our expert

Inner diameter: 12 mm
Outer diameter: 16 mm
Width: 3 mm

Product description

Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal.

Avantages

Low cross-sectional height
Retain the lubricant
Exclude contaminants

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 12 mm
Outer diameter: 16 mm
Width: 3 mm
Shaft diameter: 12 mm
Unit system: Metric
Seal width: 3 mm
Sealing lip material: Acrylonitrile-butadiene rubber (NBR)
Auxiliary lip: No
Housing bore diameter: 16 mm

Brand SKF
01310144
EAN 7316570799026
Supplier number SKF G 12X16X3

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this radial shaft seal?: It features an inside diameter of 12 mm, an outside diameter of 16 mm, and a width of 3 mm.
What type of bearings is this G-design seal intended for?: This low cross-sectional height seal is designed for bearing arrangements that incorporate needle roller bearings.
What material is used for this seal?: The sealing lip is made of nitrile rubber (NBR) and reinforced with sheet steel.
Does this shaft seal include a garter spring?: No, the SKF G-design is a contact seal with a single lip constructed without a garter spring.