_

SKF G 8X15X3 radial shaft seal 8 mm x 15 mm x 3 mm

• Inner diameter: 8 mm
• Outer diameter: 15 mm
• Width: 3 mm

On stock, immediately available.

11.01

€9.10 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 9.1 ]
query took: 1781047111.8548

layer :



r: 01310272
p: 9.1
pid: 85306
b: SKF
q: 14
st: 1
lt: 1
ean: 7316571037165
sr: SKF G 8X15X3
sr_no_br: G 8X15X3
sr_no_br_cl: G8X15X3
sr_cl: SKFG8X15X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 8 mm Outer diameter 15 mm Width 3 mm
n: SKF G 8X15X3 radial shaft seal 8 mm x 15 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 8 mm x 15 mm x 3 mm
kpn: G 8X15X3
kpn_dash:
kpn_clear: G8X15X3
bkpn: SKF G 8X15X3
bkpn_clear: SKF G8X15X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G8X15X3
sr_ns: SKFG8X15X3

_

SKF G 28X37X4 radial shaft seal 28 mm x 37 mm x 4 mm

• Inner diameter: 28 mm
• Outer diameter: 37 mm
• Width: 4 mm

On stock, immediately available.

Recommended Retail Price €19.14

9.40

€7.77 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 7.768 ]
query took: 1781047111.8548

layer :



r: 01310056
p: 7.768
pid: 84028
b: SKF
q: 12
st: 1
lt: 1
ean: 7316570642551
sr: SKF G 28X37X4
sr_no_br: G 28X37X4
sr_no_br_cl: G28X37X4
sr_cl: SKFG28X37X4
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 28 mm Outer diameter 37 mm Width 4 mm
n: SKF G 28X37X4 radial shaft seal 28 mm x 37 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 28 mm x 37 mm x 4 mm
kpn: G 28X37X4
kpn_dash:
kpn_clear: G28X37X4
bkpn: SKF G 28X37X4
bkpn_clear: SKF G28X37X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G28X37X4
sr_ns: SKFG28X37X4

_

SKF G 40X52X5 radial shaft seal 40 mm x 52 mm x 5 mm

• Inner diameter: 40 mm
• Outer diameter: 52 mm
• Width: 5 mm

On stock, immediately available.

Recommended Retail Price €18.54

8.95

€7.40 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 7.396 ]
query took: 1781047111.8548

layer :



r: 01310005
p: 7.396
pid: 85718
b: SKF
q: 200
st: 1
lt: 1
ean: 7316570128079
sr: SKF G 40X52X5
sr_no_br: G 40X52X5
sr_no_br_cl: G40X52X5
sr_cl: SKFG40X52X5
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 40 mm Outer diameter 52 mm Width 5 mm
n: SKF G 40X52X5 radial shaft seal 40 mm x 52 mm x 5 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 40 mm x 52 mm x 5 mm
kpn: G 40X52X5
kpn_dash:
kpn_clear: G40X52X5
bkpn: SKF G 40X52X5
bkpn_clear: SKF G40X52X5
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G40X52X5
sr_ns: SKFG40X52X5

_

SKF G 12X19X3 radial shaft seal 12 mm x 19 mm x 3 mm

• Inner diameter: 12 mm
• Outer diameter: 19 mm
• Width: 3 mm

On stock, immediately available.

4.91

€4.06 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 4.06 ]
query took: 1781047111.8548

layer :



r: 01310001
p: 4.06
pid: 84297
b: SKF
q: 25
st: 1
lt: 1
ean: 7316570082234
sr: SKF G 12X19X3
sr_no_br: G 12X19X3
sr_no_br_cl: G12X19X3
sr_cl: SKFG12X19X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 12 mm Outer diameter 19 mm Width 3 mm
n: SKF G 12X19X3 radial shaft seal 12 mm x 19 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 12 mm x 19 mm x 3 mm
kpn: G 12X19X3
kpn_dash:
kpn_clear: G12X19X3
bkpn: SKF G 12X19X3
bkpn_clear: SKF G12X19X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G12X19X3
sr_ns: SKFG12X19X3

_

SKF G 70X78X5 radial shaft seal 70 mm x 78 mm x 5 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 54.06 ]
query took: 1781047111.8548

layer :



r: 01311021
p: 54.06
pid: 8605
b: SKF
q: 0
st:
lt: 8
ean: 7316570850604
sr: SKF G 70X78X5
sr_no_br: G 70X78X5
sr_no_br_cl: G70X78X5
sr_cl: SKFG70X78X5
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 70 mm Outer diameter 78 mm Width 5 mm
n: SKF G 70X78X5 radial shaft seal 70 mm x 78 mm x 5 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 70 mm x 78 mm x 5 mm
kpn: G 70X78X5
kpn_dash:
kpn_clear: G70X78X5
bkpn: SKF G 70X78X5
bkpn_clear: SKF G70X78X5
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G70X78X5
sr_ns: SKFG70X78X5

_

SKF G 37X47X4 radial shaft seal 37 mm x 47 mm x 4 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 19.14 ]
query took: 1781047111.8549

layer :



r: 01310169
p: 19.14
pid: 7897
b: SKF
q: 0
st:
lt: 10
ean: 7316570676235
sr: SKF G 37X47X4
sr_no_br: G 37X47X4
sr_no_br_cl: G37X47X4
sr_cl: SKFG37X47X4
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 37 mm Outer diameter 47 mm Width 4 mm
n: SKF G 37X47X4 radial shaft seal 37 mm x 47 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 37 mm x 47 mm x 4 mm
kpn: G 37X47X4
kpn_dash:
kpn_clear: G37X47X4
bkpn: SKF G 37X47X4
bkpn_clear: SKF G37X47X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G37X47X4
sr_ns: SKFG37X47X4

_

SKF G 38X48X4 radial shaft seal 38 mm x 48 mm x 4 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 13.54 ]
query took: 1781047111.8549

layer :



r: 01311018
p: 13.54
pid: 9060
b: SKF
q: 0
st:
lt: 10
ean: 7316571105727
sr: SKF G 38X48X4
sr_no_br: G 38X48X4
sr_no_br_cl: G38X48X4
sr_cl: SKFG38X48X4
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 38 mm Outer diameter 48 mm Width 4 mm
n: SKF G 38X48X4 radial shaft seal 38 mm x 48 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 38 mm x 48 mm x 4 mm
kpn: G 38X48X4
kpn_dash:
kpn_clear: G38X48X4
bkpn: SKF G 38X48X4
bkpn_clear: SKF G38X48X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G38X48X4
sr_ns: SKFG38X48X4

_

SKF G 14X22X3 radial shaft seal 14 mm x 22 mm x 3 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 9.26 ]
query took: 1781047111.8549

layer :



r: 01310149
p: 9.26
pid: 9053
b: SKF
q: 0
st:
lt: 10
ean: 7316571087306
sr: SKF G 14X22X3
sr_no_br: G 14X22X3
sr_no_br_cl: G14X22X3
sr_cl: SKFG14X22X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 14 mm Outer diameter 22 mm Width 3 mm
n: SKF G 14X22X3 radial shaft seal 14 mm x 22 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 14 mm x 22 mm x 3 mm
kpn: G 14X22X3
kpn_dash:
kpn_clear: G14X22X3
bkpn: SKF G 14X22X3
bkpn_clear: SKF G14X22X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G14X22X3
sr_ns: SKFG14X22X3

_

SKF G 13X19X3 radial shaft seal 13 mm x 19 mm x 3 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 8.96 ]
query took: 1781047111.8549

layer :



r: 01310146
p: 8.96
pid: 7166
b: SKF
q: 0
st:
lt: 10
ean: 7316571002316
sr: SKF G 13X19X3
sr_no_br: G 13X19X3
sr_no_br_cl: G13X19X3
sr_cl: SKFG13X19X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 13 mm Outer diameter 19 mm Width 3 mm
n: SKF G 13X19X3 radial shaft seal 13 mm x 19 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 13 mm x 19 mm x 3 mm
kpn: G 13X19X3
kpn_dash:
kpn_clear: G13X19X3
bkpn: SKF G 13X19X3
bkpn_clear: SKF G13X19X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G13X19X3
sr_ns: SKFG13X19X3

_

SKF G 8X12X3 radial shaft seal 8 mm x 12 mm x 3 mm

This product has been discontinued.

[SEARCH SCORE
Sold desc:
0, 0, 8.53 ]
query took: 1781047111.8549

layer :



r: 01310139
p: 8.53
pid: 7888
b: SKF
q: 0
st:
lt: 12
ean: 7316570967012
sr: SKF G 8X12X3
sr_no_br: G 8X12X3
sr_no_br_cl: G8X12X3
sr_cl: SKFG8X12X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo:
av: Inner diameter 8 mm Outer diameter 12 mm Width 3 mm
n: SKF G 8X12X3 radial shaft seal 8 mm x 12 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 8 mm x 12 mm x 3 mm
kpn: G 8X12X3
kpn_dash:
kpn_clear: G8X12X3
bkpn: SKF G 8X12X3
bkpn_clear: SKF G8X12X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G8X12X3
sr_ns: SKFG8X12X3