r: 03050236 p: 10.413 pid: 87882 b: RENOLD q: 10 st: 1 lt: 1 ean: 0673766005529 sr: RENOLD 111046S30I sr_no_br: 111046S30I sr_no_br_cl: 111046S30I sr_cl: RENOLD111046S30I sr_dash: sold: 10.413 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,13 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 11,4 mm Height 2 Thickness (outer plate) 0,98 mm Plate height 9,6 mm Version (link) Simplex Diameter (pin) 4,09 mm Diameter (roller) 7,75 mm Breaking strength 8900 N Inside width 4,88 mm n: RENOLD 111046S30I reducer SYNERGY - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY - simplex 1/2 inch kpn: 111046S30I kpn_dash: kpn_clear: 111046S30I bkpn: RENOLD 111046S30I bkpn_clear: RENOLD 111046S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 111046S30I sr_ns: RENOLD111046S30I
r: 03030174 p: 10.2 pid: 88410 b: RENOLD q: 19 st: 1 lt: 1 ean: 6623901217588 sr: RENOLD 05B1S26I sr_no_br: 05B1S26I sr_no_br_cl: 05B1S26I sr_cl: RENOLD05B1S26I sr_dash: sold: 10.2 p_range: none type: standard act: 1 avo: 1 av: Pitch 8 mm Length (pin) 8,6 mm Product line Renold Blue Weight (kg/m) 0,18 kg/m Thickness (outer plate) 0,76 mm Type (ISO/ANSI) 05B-1 Height 1,5 Inside width 3 mm Breaking strength 4400 N Diameter (pin) 2,31 mm Thickness (inner plate) 0,76 mm Plate height 7,11 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 05B-1 No. 26 connecting link simplex 5/16" - 05B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link simplex 5/16" kpn: BLUE 05B-1 No. 26 kpn_dash: BLUE 05B kpn_clear: BLUE05B1No26 bkpn: RENOLD BLUE 05B-1 No. 26 bkpn_clear: RENOLD BLUE05B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 05B1S26I sr_ns: RENOLD05B1S26I
r: 03030137 p: 10.179 pid: 88406 b: RENOLD q: 24 st: 1 lt: 1 ean: 0673766015382 sr: RENOLD 06B1SSS26I sr_no_br: 06B1SSS26I sr_no_br_cl: 06B1SSS26I sr_cl: RENOLD06B1SSS26I sr_dash: sold: 10.179 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 12,5 mm Product line Renold Stainless Steel Weight (kg/m) 0,39 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-1 Height 1,3 Inside width 5,72 mm Breaking strength 6850 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 06B-1 No. 26 closing link simplex 3/8" - 06B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 3/8" kpn: stainless steel 06B-1 No. 26 kpn_dash: stainless steel 06B kpn_clear: stainlesssteel06B1No26 bkpn: RENOLD stainless steel 06B-1 No. 26 bkpn_clear: RENOLD stainlesssteel06B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B1SSS26I sr_ns: RENOLD06B1SSS26I
r: 03030091 p: 9.421 pid: 71515 b: RENOLD q: 25 st: 1 lt: 1 ean: 0673766006595 sr: RENOLD GY08B2S26I sr_no_br: GY08B2S26I sr_no_br_cl: GY08B2S26I sr_cl: RENOLDGY08B2S26I sr_dash: sold: 9.421 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,4 mm Product line Renold Synergy Weight (kg/m) 1,38 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 31100 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNERGY 08B-2 S No. 26 connecting link duplex 1/2" - GY08B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1/2" kpn: SYNERGY 08B-2 S No. 26 kpn_dash: SYNERGY 08B kpn_clear: SYNERGY08B2SNo26 bkpn: RENOLD SYNERGY 08B-2 S No. 26 bkpn_clear: RENOLD SYNERGY08B2SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY08B2S26I sr_ns: RENOLDGY08B2S26I
r: 03050072 p: 8.76 pid: 90018 b: RENOLD q: 9 st: 1 lt: 1 ean: 0673766002351 sr: RENOLD GY10B1S30I sr_no_br: GY10B1S30I sr_no_br_cl: GY10B1S30I sr_cl: RENOLDGY10B1S30I sr_dash: sold: 8.76 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,81 kg/m Length (pin) 16 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 6,48 mm n: RENOLD GY10B1S30I reducer SYNERGY 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 10b-1 - simplex 5/8 inch kpn: GY10B1S30I kpn_dash: kpn_clear: GY10B1S30I bkpn: RENOLD GY10B1S30I bkpn_clear: RENOLD GY10B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY10B1S30I sr_ns: RENOLDGY10B1S30I
r: 03050064 p: 7.92 pid: 87808 b: RENOLD q: 23 st: 1 lt: 1 ean: 0673766001651 sr: RENOLD 08B1S30I sr_no_br: 08B1S30I sr_no_br_cl: 08B1S30I sr_cl: RENOLD08B1S30I sr_dash: sold: 7.92 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD 08B1S30I reducer BLUE 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-1 - simplex 1/2 inch kpn: 08B1S30I kpn_dash: kpn_clear: 08B1S30I bkpn: RENOLD 08B1S30I bkpn_clear: RENOLD 08B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B1S30I sr_ns: RENOLD08B1S30I
r: 03030086 p: 6.43 pid: 89583 b: RENOLD q: 59 st: 1 lt: 1 ean: 0673766001590 sr: RENOLD GY08B1S26I sr_no_br: GY08B1S26I sr_no_br_cl: GY08B1S26I sr_cl: RENOLDGY08B1S26I sr_dash: sold: 6.43 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,5 mm Product line Renold Synergy Weight (kg/m) 0,7 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-1 Height 2 Inside width 7,75 mm Breaking strength 17800 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 08B-1 S No. 26 closing link simplex 1/2" - GY08B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1/2" kpn: SYNERGY 08B-1 S No. 26 kpn_dash: SYNERGY 08B kpn_clear: SYNERGY08B1SNo26 bkpn: RENOLD SYNERGY 08B-1 S No. 26 bkpn_clear: RENOLD SYNERGY08B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY08B1S26I sr_ns: RENOLDGY08B1S26I
r: 03030202 p: 6.06 pid: 88417 b: RENOLD q: 17 st: 1 lt: 1 ean: 0673766005499 sr: RENOLD 111046S26I sr_no_br: 111046S26I sr_no_br_cl: 111046S26I sr_cl: RENOLD111046S26I sr_dash: sold: 6.06 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 11,4 mm Product line Renold Synergy Weight (kg/m) 0,35 kg/m Thickness (outer plate) 0,98 mm Height 2 Inside width 4,88 mm Breaking strength 8900 N Diameter (pin) 4,09 mm Thickness (inner plate) 1,13 mm Plate height 9,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 080-1 S No. 26 closing link simplex 1/2" - 111046S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1/2" kpn: SYNERGY 080-1 S No. 26 kpn_dash: SYNERGY 080 kpn_clear: SYNERGY0801SNo26 bkpn: RENOLD SYNERGY 080-1 S No. 26 bkpn_clear: RENOLD SYNERGY0801SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 111046S26I sr_ns: RENOLD111046S26I
r: 02096856 p: 5.47 pid: 88314 b: RENOLD q: 21 st: 1 lt: 1 ean: 6623900536499 sr: RENOLD 60A1S11I sr_no_br: 60A1S11I sr_no_br_cl: 60A1S11I sr_cl: RENOLD60A1S11I sr_dash: sold: 5.47 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 25,3 mm Product line Renold Blue Weight (kg/m) 1,47 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,6 Inside width 12,57 mm Breaking strength 31300 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 60-1 No. 11 closing link simplex 3/4" - 60A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/4" kpn: BLUE 60-1 No. 11 kpn_dash: BLUE 60 kpn_clear: BLUE601No11 bkpn: RENOLD BLUE 60-1 No. 11 bkpn_clear: RENOLD BLUE601No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A1S11I sr_ns: RENOLD60A1S11I
r: 03030030 p: 4.75 pid: 87663 b: RENOLD q: 13 st: 1 lt: 1 ean: 6623900534402 sr: RENOLD 50A1S26I sr_no_br: 50A1S26I sr_no_br_cl: 50A1S26I sr_cl: RENOLD50A1S26I sr_dash: sold: 4.75 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 20,4 mm Product line Renold Blue Weight (kg/m) 1 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-1 Height 2,7 Inside width 9,4 mm Breaking strength 21800 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 50-1 No. 26 connecting link simplex 5/8" - 50A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link simplex 5/8" kpn: BLUE 50-1 No. 26 kpn_dash: BLUE 50 kpn_clear: BLUE501No26 bkpn: RENOLD BLUE 50-1 No. 26 bkpn_clear: RENOLD BLUE501No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A1S26I sr_ns: RENOLD50A1S26I
r: 02274375 p: 1569.877 pid: 89548 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B3S11I sr_no_br: 40B3S11I sr_no_br_cl: 40B3S11I sr_cl: RENOLD40B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Length (pin) 222,8 mm Product line Renold Blue Weight (kg/m) 48,9 kg/m Thickness (outer plate) 8,13 mm Type (ISO/ANSI) 40B-3 Height 9,5 Inside width 39,3 mm Breaking strength 950000 N Diameter (pin) 22,89 mm Thickness (inner plate) 8,13 mm Plate height 52,96 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 40B-3 No. 11 closing link plywood 2 1/2" - 40B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 2 1/2" kpn: BLUE 40B-3 No. 11 kpn_dash: BLUE 40B kpn_clear: BLUE40B3No11 bkpn: RENOLD BLUE 40B-3 No. 11 bkpn_clear: RENOLD BLUE40B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40B3S11I sr_ns: RENOLD40B3S11I
r: 02274380 p: 1532.649 pid: 87792 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B2S12I sr_no_br: 40B2S12I sr_no_br_cl: 40B2S12I sr_cl: RENOLD40B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Thickness (inner plate) 8,13 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 32,8 kg/m Length (pin) 150,5 mm Height 9,5 Thickness (outer plate) 8,13 mm Plate height 52,96 mm Type (ISO/ANSI) 40B-2 Version (link) Duplex Diameter (pin) 22,89 mm Diameter (roller) 39,37 mm Breaking strength 630000 N Inside width 39,37 mm n: RENOLD 40B2S12I reducing link BLUE 40b-2 - duplex 2 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 40b-2 - duplex 2 1/2 inch kpn: 40B2S12I kpn_dash: kpn_clear: 40B2S12I bkpn: RENOLD 40B2S12I bkpn_clear: RENOLD 40B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40B2S12I sr_ns: RENOLD40B2S12I
r: 02274386 p: 1259.284 pid: 89564 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B3S107I sr_no_br: 40B3S107I sr_no_br_cl: 40B3S107I sr_cl: RENOLD40B3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch Thickness (outer plate) 8,13 mm Weight (kg/m) 48,9 kg/m Height 9,5 Breaking strength 950000 N Transverse pitch 72,29 mm Length (pin) 222,8 mm Inside width 39,3 mm Diameter (pin) 22,89 mm Thickness (inner plate) 8,13 mm Plate height 52,96 mm Product line Renold Blue Type (ISO/ANSI) 40B-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Blue 40b-3 rivet plywood 2 1/2 inch - 40B3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet plywood 2 1/2 inch kpn: Blue 40b-3 kpn_dash: Blue 40b kpn_clear: Blue40b3 bkpn: RENOLD Blue 40b-3 bkpn_clear: RENOLD Blue40b3 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 40B3S107I sr_ns: RENOLD40B3S107I
r: 96940128 p: 1017.021 pid: 95163 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B2S11I sr_no_br: 40B2S11I sr_no_br_cl: 40B2S11I sr_cl: RENOLD40B2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Length (pin) 150,5 mm Product line Renold Blue Weight (kg/m) 32,8 kg/m Thickness (outer plate) 8,13 mm Type (ISO/ANSI) 40B-2 Height 9,5 Inside width 39,37 mm Breaking strength 630000 N Diameter (pin) 22,89 mm Thickness (inner plate) 8,13 mm Plate height 52,96 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 40B-2 No. 11 connecting link duplex 2 1/2" - 40B2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 2 1/2" kpn: BLUE 40B-2 No. 11 kpn_dash: BLUE 40B kpn_clear: BLUE40B2No11 bkpn: RENOLD BLUE 40B-2 No. 11 bkpn_clear: RENOLD BLUE40B2No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40B2S11I sr_ns: RENOLD40B2S11I
r: 02097291 p: 833.842 pid: 87787 b: RENOLD q: 0 st: lt: 15 ean: 6623901310241 sr: RENOLD 160A3S12I sr_no_br: 160A3S12I sr_no_br_cl: 160A3S12I sr_cl: RENOLD160A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 31 kg/m Length (pin) 180,2 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-3 Version (link) Triplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 669000 N Inside width 31,55 mm n: RENOLD 160A3S12I reducer BLUE 160-3 - plywood 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 160-3 - plywood 2 inch kpn: 160A3S12I kpn_dash: kpn_clear: 160A3S12I bkpn: RENOLD 160A3S12I bkpn_clear: RENOLD 160A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A3S12I sr_ns: RENOLD160A3S12I
r: 02274385 p: 815.862 pid: 87641 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B2S107I sr_no_br: 40B2S107I sr_no_br_cl: 40B2S107I sr_cl: RENOLD40B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch Thickness (outer plate) 8,13 mm Weight (kg/m) 32,8 kg/m Height 9,5 Breaking strength 630000 N Transverse pitch 72,29 mm Length (pin) 150,5 mm Inside width 39,37 mm Diameter (pin) 22,89 mm Thickness (inner plate) 8,13 mm Plate height 52,96 mm Product line Renold Blue Type (ISO/ANSI) 40B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 40b-2 rivet link duplex 2 1/2 inch - 40B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 2 1/2 inch kpn: Blue 40b-2 kpn_dash: Blue 40b kpn_clear: Blue40b2 bkpn: RENOLD Blue 40b-2 bkpn_clear: RENOLD Blue40b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 40B2S107I sr_ns: RENOLD40B2S107I
r: 03050205 p: 709.752 pid: 87853 b: RENOLD q: 0 st: lt: 15 ean: 6623901324279 sr: RENOLD GY24B3S12I sr_no_br: GY24B3S12I sr_no_br_cl: GY24B3S12I sr_cl: RENOLDGY24B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 22,25 kg/m Length (pin) 149,7 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-3 Version (link) Triplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 425000 N Inside width 25,4 mm n: RENOLD GY24B3S12I reducer SYNERGY 24b-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 24b-3 - plywood 1 1/2 inch kpn: GY24B3S12I kpn_dash: kpn_clear: GY24B3S12I bkpn: RENOLD GY24B3S12I bkpn_clear: RENOLD GY24B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY24B3S12I sr_ns: RENOLDGY24B3S12I
r: 02097286 p: 675.371 pid: 89778 b: RENOLD q: 0 st: lt: 15 ean: 6623901307616 sr: RENOLD 140A3S12I sr_no_br: 140A3S12I sr_no_br_cl: 140A3S12I sr_cl: RENOLD140A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 5,61 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 23,1 kg/m Length (pin) 150,7 mm Height 5,2 Thickness (outer plate) 5,61 mm Plate height 42,23 mm Type (ISO/ANSI) 140-3 Version (link) Triplex Diameter (pin) 12,71 mm Diameter (roller) 25,4 mm Breaking strength 510000 N Inside width 25,23 mm n: RENOLD 140A3S12I reducer BLUE 140-3 - plywood 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 140-3 - plywood 1 3/4 inch kpn: 140A3S12I kpn_dash: kpn_clear: 140A3S12I bkpn: RENOLD 140A3S12I bkpn_clear: RENOLD 140A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 140A3S12I sr_ns: RENOLD140A3S12I
r: 03050207 p: 641.28 pid: 30004 b: RENOLD q: 0 st: lt: 15 ean: 0673766009749 sr: RENOLD 32B3S12I sr_no_br: 32B3S12I sr_no_br_cl: 32B3S12I sr_cl: RENOLD32B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 7,11 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 30 kg/m Length (pin) 180,5 mm Height 8 Thickness (outer plate) 6,35 mm Plate height 42,29 mm Type (ISO/ANSI) 32B-3 Version (link) Triplex Diameter (pin) 17,81 mm Diameter (roller) 29,21 mm Breaking strength 670000 N Inside width 30,99 mm n: RENOLD 32B3S12I reducer BLUE 32b-3 - plywood 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 32b-3 - plywood 2 inch kpn: 32B3S12I kpn_dash: kpn_clear: 32B3S12I bkpn: RENOLD 32B3S12I bkpn_clear: RENOLD 32B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 32B3S12I sr_ns: RENOLD32B3S12I
r: 02097230 p: 530.537 pid: 89731 b: RENOLD q: 0 st: lt: 15 ean: 6623900528142 sr: RENOLD 160A2S12I sr_no_br: 160A2S12I sr_no_br_cl: 160A2S12I sr_cl: RENOLD160A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 20,6 kg/m Length (pin) 121,6 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-2 Version (link) Duplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 446000 N Inside width 31,55 mm n: RENOLD 160A2S12I reducing link BLUE 160-2 - duplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 160-2 - duplex 2 inch kpn: 160A2S12I kpn_dash: kpn_clear: 160A2S12I bkpn: RENOLD 160A2S12I bkpn_clear: RENOLD 160A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A2S12I sr_ns: RENOLD160A2S12I
