r: 02097230 p: 530.537 pid: 89731 b: RENOLD q: 0 st: lt: 15 ean: 6623900528142 sr: RENOLD 160A2S12I sr_no_br: 160A2S12I sr_no_br_cl: 160A2S12I sr_cl: RENOLD160A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 20,6 kg/m Length (pin) 121,6 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-2 Version (link) Duplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 446000 N Inside width 31,55 mm n: RENOLD 160A2S12I reducing link BLUE 160-2 - duplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 160-2 - duplex 2 inch kpn: 160A2S12I kpn_dash: kpn_clear: 160A2S12I bkpn: RENOLD 160A2S12I bkpn_clear: RENOLD 160A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A2S12I sr_ns: RENOLD160A2S12I
r: 03050206 p: 519.504 pid: 87856 b: RENOLD q: 0 st: lt: 15 ean: 0673766009701 sr: RENOLD 28B3S12I sr_no_br: 28B3S12I sr_no_br_cl: 28B3S12I sr_cl: RENOLD28B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 7,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 28 kg/m Length (pin) 183,3 mm Height 6,8 Thickness (outer plate) 6,35 mm Plate height 37,08 mm Type (ISO/ANSI) 28B-3 Version (link) Triplex Diameter (pin) 15,9 mm Diameter (roller) 27,94 mm Breaking strength 530000 N Inside width 30,99 mm n: RENOLD 28B3S12I reducer BLUE 28b-3 - plywood 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 28b-3 - plywood 1 3/4 inch kpn: 28B3S12I kpn_dash: kpn_clear: 28B3S12I bkpn: RENOLD 28B3S12I bkpn_clear: RENOLD 28B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 28B3S12I sr_ns: RENOLD28B3S12I
r: 02097272 p: 461.322 pid: 88174 b: RENOLD q: 0 st: lt: 15 ean: 6623900526056 sr: RENOLD 120A3S12I sr_no_br: 120A3S12I sr_no_br_cl: 120A3S12I sr_cl: RENOLD120A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 16,7 kg/m Length (pin) 140,2 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-3 Version (link) Triplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 375000 N Inside width 25,23 mm n: RENOLD 120A3S12I reducer BLUE 120-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 120-3 - plywood 1 1/2 inch kpn: 120A3S12I kpn_dash: kpn_clear: 120A3S12I bkpn: RENOLD 120A3S12I bkpn_clear: RENOLD 120A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 120A3S12I sr_ns: RENOLD120A3S12I
r: 03050198 p: 451.57 pid: 88237 b: RENOLD q: 0 st: lt: 15 ean: 6623901324217 sr: RENOLD GY24B2S12I sr_no_br: GY24B2S12I sr_no_br_cl: GY24B2S12I sr_cl: RENOLDGY24B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 14,8 kg/m Length (pin) 101,3 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-2 Version (link) Duplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 280000 N Inside width 25,4 mm n: RENOLD GY24B2S12I reducer SYNERGY 24b-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 24b-2 - duplex 1 1/2 inch kpn: GY24B2S12I kpn_dash: kpn_clear: GY24B2S12I bkpn: RENOLD GY24B2S12I bkpn_clear: RENOLD GY24B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY24B2S12I sr_ns: RENOLDGY24B2S12I
r: 03030281 p: 447.892 pid: 87744 b: RENOLD q: 0 st: lt: 15 ean: 6623900897507 sr: RENOLD GY120A3S107I sr_no_br: GY120A3S107I sr_no_br_cl: GY120A3S107I sr_cl: RENOLDGY120A3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch Thickness (outer plate) 4,8 mm Weight (kg/m) 16,7 kg/m Height 5,3 Breaking strength 375000 N Transverse pitch 45,44 mm Length (pin) 140,2 mm Inside width 25,23 mm Diameter (pin) 11,11 mm Thickness (inner plate) 4,8 mm Plate height 36,2 mm Product line Renold Synergy Type (ISO/ANSI) 120A-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Synergy 120a-3 rivet plywood 1 1/2 inch - GY120A3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet plywood 1 1/2 inch kpn: Synergy 120a-3 kpn_dash: Synergy 120a kpn_clear: Synergy120a3 bkpn: RENOLD Synergy 120a-3 bkpn_clear: RENOLD Synergy120a3 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY120A3S107I sr_ns: RENOLDGY120A3S107I
r: 02097222 p: 429.71 pid: 87778 b: RENOLD q: 0 st: lt: 15 ean: 6623900527213 sr: RENOLD 140A2S12I sr_no_br: 140A2S12I sr_no_br_cl: 140A2S12I sr_cl: RENOLD140A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 5,61 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 15,5 kg/m Length (pin) 101,8 mm Height 5,2 Thickness (outer plate) 5,61 mm Plate height 42,23 mm Type (ISO/ANSI) 140-2 Version (link) Duplex Diameter (pin) 12,71 mm Diameter (roller) 25,4 mm Breaking strength 340000 N Inside width 25,23 mm n: RENOLD 140A2S12I reducing link BLUE 140-2 - duplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 140-2 - duplex 1 3/4 inch kpn: 140A2S12I kpn_dash: kpn_clear: 140A2S12I bkpn: RENOLD 140A2S12I bkpn_clear: RENOLD 140A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 140A2S12I sr_ns: RENOLD140A2S12I
r: 03030314 p: 408.099 pid: 88472 b: RENOLD q: 0 st: lt: 15 ean: 0673766007684 sr: RENOLD 32B2S107I sr_no_br: 32B2S107I sr_no_br_cl: 32B2S107I sr_cl: RENOLD32B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch Thickness (outer plate) 6,35 mm Weight (kg/m) 20,1 kg/m Height 8 Breaking strength 450000 N Transverse pitch 58,55 mm Length (pin) 122 mm Inside width 29,21 mm Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Product line Renold Blue Type (ISO/ANSI) 32B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 32b-2 rivet link duplex 2 inch - 32B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 2 inch kpn: Blue 32b-2 kpn_dash: Blue 32b kpn_clear: Blue32b2 bkpn: RENOLD Blue 32b-2 bkpn_clear: RENOLD Blue32b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 32B2S107I sr_ns: RENOLD32B2S107I
r: 03050020 p: 408.099 pid: 88608 b: RENOLD q: 0 st: lt: 15 ean: 0673766007707 sr: RENOLD 32B2S12I sr_no_br: 32B2S12I sr_no_br_cl: 32B2S12I sr_cl: RENOLD32B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 7,11 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 20,1 kg/m Length (pin) 122 mm Height 8 Thickness (outer plate) 6,35 mm Plate height 42,29 mm Type (ISO/ANSI) 32B-2 Version (link) Duplex Diameter (pin) 17,81 mm Diameter (roller) 29,21 mm Breaking strength 450000 N Inside width 29,21 mm n: RENOLD 32B2S12I reducer BLUE 32b-2 - duplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 32b-2 - duplex 2 inch kpn: 32B2S12I kpn_dash: kpn_clear: 32B2S12I bkpn: RENOLD 32B2S12I bkpn_clear: RENOLD 32B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 32B2S12I sr_ns: RENOLD32B2S12I
r: 02142808 p: 407.603 pid: 87789 b: RENOLD q: 0 st: lt: 15 ean: 0673766004478 sr: RENOLD 40B1S12I sr_no_br: 40B1S12I sr_no_br_cl: 40B1S12I sr_cl: RENOLD40B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Thickness (inner plate) 8,13 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 16,5 kg/m Length (pin) 78,2 mm Height 9,5 Thickness (outer plate) 8,13 mm Plate height 52,96 mm Type (ISO/ANSI) 40B-1 Version (link) Simplex Diameter (pin) 22,89 mm Diameter (roller) 39,37 mm Breaking strength 355000 N Inside width 39,3 mm n: RENOLD 40B1S12I reducer BLUE 40b-1 - simplex 2 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 40b-1 - simplex 2 1/2 inch kpn: 40B1S12I kpn_dash: kpn_clear: 40B1S12I bkpn: RENOLD 40B1S12I bkpn_clear: RENOLD 40B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40B1S12I sr_ns: RENOLD40B1S12I
r: 02097290 p: 404.793 pid: 87633 b: RENOLD q: 0 st: lt: 15 ean: 6623900528234 sr: RENOLD 160A3S11I sr_no_br: 160A3S11I sr_no_br_cl: 160A3S11I sr_cl: RENOLD160A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Length (pin) 180,2 mm Product line Renold Blue Weight (kg/m) 31 kg/m Thickness (outer plate) 6,35 mm Type (ISO/ANSI) 160-3 Height 6,5 Inside width 31,55 mm Breaking strength 669000 N Diameter (pin) 14,29 mm Thickness (inner plate) 6,35 mm Plate height 48,26 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 160-3 No. 11 closing link plywood 2" - 160A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 2" kpn: BLUE 160-3 No. 11 kpn_dash: BLUE 160 kpn_clear: BLUE1603No11 bkpn: RENOLD BLUE 160-3 No. 11 bkpn_clear: RENOLD BLUE1603No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 160A3S11I sr_ns: RENOLD160A3S11I
r: 02274454 p: 358.267 pid: 89570 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 24B2SNS11I sr_no_br: 24B2SNS11I sr_no_br_cl: 24B2SNS11I sr_cl: RENOLD24B2SNS11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 101 mm Product line Renold Syno Weight (kg/m) 14,7 kg/m Thickness (outer plate) 4,88 mm Type (ISO/ANSI) 24B-2 Height 5 Inside width 25,4 mm Breaking strength 280000 N Diameter (pin) 14,63 mm Thickness (inner plate) 6,08 mm Plate height 33,4 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD SYNO 24B-2 SN No. 11 connecting link duplex 1 1/2" - 24B2SNS11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 1 1/2" kpn: SYNO 24B-2 SN No. 11 kpn_dash: SYNO 24B kpn_clear: SYNO24B2SNNo11 bkpn: RENOLD SYNO 24B-2 SN No. 11 bkpn_clear: RENOLD SYNO24B2SNNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 24B2SNS11I sr_ns: RENOLD24B2SNS11I
r: 03050027 p: 354.71 pid: 87805 b: RENOLD q: 34 st: 1 lt: 1 ean: 0673766009640 sr: RENOLD 24B3S12I sr_no_br: 24B3S12I sr_no_br_cl: 24B3S12I sr_cl: RENOLD24B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 22,25 kg/m Length (pin) 149,7 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-3 Version (link) Triplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 425000 N Inside width 25,4 mm n: RENOLD 24B3S12I reducer BLUE 24b-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 24b-3 - plywood 1 1/2 inch kpn: 24B3S12I kpn_dash: kpn_clear: 24B3S12I bkpn: RENOLD 24B3S12I bkpn_clear: RENOLD 24B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 24B3S12I sr_ns: RENOLD24B3S12I
r: 03030197 p: 344.462 pid: 87706 b: RENOLD q: 0 st: lt: 15 ean: 0673766040896 sr: RENOLD GY24B3S11I sr_no_br: GY24B3S11I sr_no_br_cl: GY24B3S11I sr_cl: RENOLDGY24B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 149,7 mm Product line Renold Synergy Weight (kg/m) 22,25 kg/m Thickness (outer plate) 5,08 mm Type (ISO/ANSI) 24B-3 Height 6,8 Inside width 25,4 mm Breaking strength 425000 N Diameter (pin) 14,63 mm Thickness (inner plate) 6,1 mm Plate height 33,4 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD SYNERGY 24B-3 S No. 11 closing link plywood 1 1/2" - GY24B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 1 1/2" kpn: SYNERGY 24B-3 S No. 11 kpn_dash: SYNERGY 24B kpn_clear: SYNERGY24B3SNo11 bkpn: RENOLD SYNERGY 24B-3 S No. 11 bkpn_clear: RENOLD SYNERGY24B3SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY24B3S11I sr_ns: RENOLDGY24B3S11I
r: 03050199 p: 330.537 pid: 88651 b: RENOLD q: 0 st: lt: 15 ean: 0673766007660 sr: RENOLD 28B2S12I sr_no_br: 28B2S12I sr_no_br_cl: 28B2S12I sr_cl: RENOLD28B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 7,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 18,6 kg/m Length (pin) 123,7 mm Height 6,8 Thickness (outer plate) 6,35 mm Plate height 37,08 mm Type (ISO/ANSI) 28B-2 Version (link) Duplex Diameter (pin) 15,9 mm Diameter (roller) 27,94 mm Breaking strength 360000 N Inside width 27,94 mm n: RENOLD 28B2S12I reducing link BLUE 28b-2 - duplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 28b-2 - duplex 1 3/4 inch kpn: 28B2S12I kpn_dash: kpn_clear: 28B2S12I bkpn: RENOLD 28B2S12I bkpn_clear: RENOLD 28B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 28B2S12I sr_ns: RENOLD28B2S12I
r: 02097285 p: 327.768 pid: 89542 b: RENOLD q: 0 st: lt: 15 ean: 6623900527305 sr: RENOLD 140A3S11I sr_no_br: 140A3S11I sr_no_br_cl: 140A3S11I sr_cl: RENOLD140A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Length (pin) 150,7 mm Product line Renold Blue Weight (kg/m) 23,1 kg/m Thickness (outer plate) 5,61 mm Type (ISO/ANSI) 140-3 Height 5,2 Inside width 25,23 mm Breaking strength 510000 N Diameter (pin) 12,71 mm Thickness (inner plate) 5,61 mm Plate height 42,23 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 140-3 No. 11 closing link plywood 1 3/4" - 140A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1 3/4" kpn: BLUE 140-3 No. 11 kpn_dash: BLUE 140 kpn_clear: BLUE1403No11 bkpn: RENOLD BLUE 140-3 No. 11 bkpn_clear: RENOLD BLUE1403No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 140A3S11I sr_ns: RENOLD140A3S11I
r: 03030319 p: 311.239 pid: 88476 b: RENOLD q: 0 st: lt: 15 ean: 0673766009725 sr: RENOLD 32B3S107I sr_no_br: 32B3S107I sr_no_br_cl: 32B3S107I sr_cl: RENOLD32B3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch Thickness (outer plate) 6,35 mm Weight (kg/m) 30 kg/m Height 8 Breaking strength 670000 N Transverse pitch 58,55 mm Length (pin) 180,5 mm Inside width 30,99 mm Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Product line Renold Blue Type (ISO/ANSI) 32B-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Blue 32b-3 rivet plywood 2 inch - 32B3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet plywood 2 inch kpn: Blue 32b-3 kpn_dash: Blue 32b kpn_clear: Blue32b3 bkpn: RENOLD Blue 32b-3 bkpn_clear: RENOLD Blue32b3 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 32B3S107I sr_ns: RENOLD32B3S107I
r: 03030199 p: 311.239 pid: 88415 b: RENOLD q: 0 st: lt: 15 ean: 0673766009732 sr: RENOLD 32B3S11I sr_no_br: 32B3S11I sr_no_br_cl: 32B3S11I sr_cl: RENOLD32B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Length (pin) 180,5 mm Product line Renold Blue Weight (kg/m) 30 kg/m Thickness (outer plate) 6,35 mm Type (ISO/ANSI) 32B-3 Height 8 Inside width 30,99 mm Breaking strength 670000 N Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 32B-3 No. 11 closing link plywood 2" - 32B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 2" kpn: BLUE 32B-3 No. 11 kpn_dash: BLUE 32B kpn_clear: BLUE32B3No11 bkpn: RENOLD BLUE 32B-3 No. 11 bkpn_clear: RENOLD BLUE32B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 32B3S11I sr_ns: RENOLD32B3S11I
r: 03050204 p: 305.619 pid: 87848 b: RENOLD q: 0 st: lt: 15 ean: 6623901336609 sr: RENOLD GY20B3S12I sr_no_br: GY20B3S12I sr_no_br_cl: GY20B3S12I sr_cl: RENOLDGY20B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,62 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 11,65 kg/m Length (pin) 113,2 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-3 Version (link) Triplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 250000 N Inside width 19,56 mm n: RENOLD GY20B3S12I reducer SYNERGY 20b-3 - plywood 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 20b-3 - plywood 1 1/4 inch kpn: GY20B3S12I kpn_dash: kpn_clear: GY20B3S12I bkpn: RENOLD GY20B3S12I bkpn_clear: RENOLD GY20B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY20B3S12I sr_ns: RENOLDGY20B3S12I
r: 02097214 p: 293.553 pid: 89771 b: RENOLD q: 0 st: lt: 15 ean: 6623900525929 sr: RENOLD 120A2S12I sr_no_br: 120A2S12I sr_no_br_cl: 120A2S12I sr_cl: RENOLD120A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 11 kg/m Length (pin) 94,7 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-2 Version (link) Duplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 250000 N Inside width 25,23 mm n: RENOLD 120A2S12I reducing link BLUE 120-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 120-2 - duplex 1 1/2 inch kpn: 120A2S12I kpn_dash: kpn_clear: 120A2S12I bkpn: RENOLD 120A2S12I bkpn_clear: RENOLD 120A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 120A2S12I sr_ns: RENOLD120A2S12I
r: 03030294 p: 284.958 pid: 88108 b: RENOLD q: 0 st: lt: 15 ean: 0673766043071 sr: RENOLD GY120A2S11I sr_no_br: GY120A2S11I sr_no_br_cl: GY120A2S11I sr_cl: RENOLDGY120A2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 94,7 mm Product line Renold Synergy Weight (kg/m) 5,7 kg/m Thickness (outer plate) 4,8 mm Type (ISO/ANSI) 120-2 Height 5,3 Inside width 25,23 mm Breaking strength 125000 N Diameter (pin) 11,11 mm Thickness (inner plate) 4,8 mm Plate height 36,2 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD SYNERGY 120-2 S No. 11 connecting link duplex 1 1/2" - GY120A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1 1/2" kpn: SYNERGY 120-2 S No. 11 kpn_dash: SYNERGY 120 kpn_clear: SYNERGY1202SNo11 bkpn: RENOLD SYNERGY 120-2 S No. 11 bkpn_clear: RENOLD SYNERGY1202SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY120A2S11I sr_ns: RENOLDGY120A2S11I
