r: 08078135 p: 47.27 pid: 37170 b: PFERD q: 0 st: lt: 8 ean: 4007220936504 sr: PFERD 43225087 sr_no_br: 43225087 sr_no_br_cl: 43225087 sr_cl: PFERD43225087 sr_dash: sold: 472.7 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,3 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Material (brush filament) Stainless steel n: PFERD KBUIT 8010/6 INOX 0,30 disk brush unturned Ø 80x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43225087 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD INOX-TOTAL bevel brush crimped KBUIT dia. 80x10 mm shank dia. 6 mm stainless steel wire dia. 0.30 Characteristics Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 80x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: KBUIT 8010/6 INOX 0,30 kpn_dash: kpn_clear: KBUIT80106INOX030 bkpn: PFERD KBUIT 8010/6 INOX 0,30 bkpn_clear: PFERD KBUIT80106INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43225087 sr_ns: PFERD43225087
r: 08078015 p: 28.66 pid: 35332 b: PFERD q: 0 st: lt: 8 ean: 4007220220818 sr: PFERD 43315001 sr_no_br: 43315001 sr_no_br_cl: 43315001 sr_cl: PFERD43315001 sr_dash: sold: 286.6 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Steel wire n: PFERD POS KBG 11515/M14 ST 0,50 disc brush twisted Ø 115x15 mm M14 steel wire-Ø 0.50 mm for angle grinder - 43315001 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 115x15 mm M14 steel wire dia. 0.50 mm angle grinders (1) Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. ds: dsc: kts: disc brush twisted Ø 115x15 mm M14 steel wire-Ø 0.50 mm for angle grinder kpn: POS KBG 11515/M14 ST 0,50 kpn_dash: kpn_clear: POSKBG11515M14ST050 bkpn: PFERD POS KBG 11515/M14 ST 0,50 bkpn_clear: PFERD POSKBG11515M14ST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43315001 sr_ns: PFERD43315001
r: 08077931 p: 28 pid: 34439 b: PFERD q: 0 st: lt: 6 ean: 4007220955284 sr: PFERD 43314020 sr_no_br: 43314020 sr_no_br_cl: 43314020 sr_cl: PFERD43314020 sr_dash: sold: 280 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Steel wire n: PFERD KBG 11515/M14 CT ST 0,50 Combitwist disc brush twisted Ø 115x15 mm M14 steel wire-Ø 0.50 mm for angle grinder - 43314020 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 115x15 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. ds: dsc: kts: Combitwist disc brush twisted Ø 115x15 mm M14 steel wire-Ø 0.50 mm for angle grinder kpn: KBG 11515/M14 CT ST 0,50 kpn_dash: kpn_clear: KBG11515M14CTST050 bkpn: PFERD KBG 11515/M14 CT ST 0,50 bkpn_clear: PFERD KBG11515M14CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43314020 sr_ns: PFERD43314020
r: 08078130 p: 24.68 pid: 34599 b: PFERD q: 0 st: lt: 8 ean: 4007220936399 sr: PFERD 43220052 sr_no_br: 43220052 sr_no_br_cl: 43220052 sr_cl: PFERD43220052 sr_dash: sold: 246.8 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,15 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD KBU 7010/6 INOX 0,15 disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43220052 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 70x10 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: KBU 7010/6 INOX 0,15 kpn_dash: kpn_clear: KBU70106INOX015 bkpn: PFERD KBU 7010/6 INOX 0,15 bkpn_clear: PFERD KBU70106INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220052 sr_ns: PFERD43220052
r: 04023599 p: 17.72 pid: 38547 b: PFERD q: 0 st: lt: 8 ean: 4007220220832 sr: PFERD 43316001 sr_no_br: 43316001 sr_no_br_cl: 43316001 sr_cl: PFERD43316001 sr_dash: sold: 177.2 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted No Thickness 10 mm Max. no-load speed 12500 rpm Material (brush filament) Steel wire n: PFERD POS KBU 10010/M14 ST 0,35 disc brush unturned Ø 100x10 mm M14 steel wire-Ø 0.35 mm for angle grinder - 43316001 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 100x10 mm M14 steel wire dia. 0.35 mm angle grinders (1) Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Suitable for use on angle grinders up to 80 m/s. Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: disc brush unturned Ø 100x10 mm M14 steel wire-Ø 0.35 mm for angle grinder kpn: POS KBU 10010/M14 ST 0,35 kpn_dash: kpn_clear: POSKBU10010M14ST035 bkpn: PFERD POS KBU 10010/M14 ST 0,35 bkpn_clear: PFERD POSKBU10010M14ST035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43316001 sr_ns: PFERD43316001
r: 04023603 p: 24.8 pid: 38558 b: PFERD q: 0 st: lt: 8 ean: 4007220806777 sr: PFERD 43316021 sr_no_br: 43316021 sr_no_br_cl: 43316021 sr_cl: PFERD43316021 sr_dash: sold: 49.6 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted No Thickness 10 mm Max. no-load speed 12500 rpm Material (brush filament) Steel wire n: PFERD POS KBU 11510/M14 ST 0,35 disc brush unturned Ø 115x10 mm M14 steel wire-Ø 0.35 mm for angle grinder - 43316021 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 115x10 mm M14 steel wire dia. 0.35 mm angle grinders Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Suitable for use on angle grinders up to 80 m/s. Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: disc brush unturned Ø 115x10 mm M14 steel wire-Ø 0.35 mm for angle grinder kpn: POS KBU 11510/M14 ST 0,35 kpn_dash: kpn_clear: POSKBU11510M14ST035 bkpn: PFERD POS KBU 11510/M14 ST 0,35 bkpn_clear: PFERD POSKBU11510M14ST035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43316021 sr_ns: PFERD43316021
r: 04023609 p: 39.52 pid: 38526 b: PFERD q: 0 st: lt: 2 ean: 4007220593455 sr: PFERD 43317011 sr_no_br: 43317011 sr_no_br_cl: 43317011 sr_cl: PFERD43317011 sr_dash: sold: 39.52 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Steel wire n: PFERD POS KBG 12515/M14 CT ST 0,50 Combitwist disc brush twisted Ø 125x15 mm M14 steel wire-Ø 0.50 mm - 43317011 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 125x15 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. ds: dsc: kts: Combitwist disc brush twisted Ø 125x15 mm M14 steel wire-Ø 0.50 mm kpn: POS KBG 12515/M14 CT ST 0,50 kpn_dash: kpn_clear: POSKBG12515M14CTST050 bkpn: PFERD POS KBG 12515/M14 CT ST 0,50 bkpn_clear: PFERD POSKBG12515M14CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317011 sr_ns: PFERD43317011
r: 08077999 p: 30.78 pid: 35008 b: PFERD q: 0 st: lt: 8 ean: 4007220003787 sr: PFERD 43313006 sr_no_br: 43313006 sr_no_br_cl: 43313006 sr_cl: PFERD43313006 sr_dash: sold: 30.78 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 20000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 10013/M14 INOX 0,50 disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder - 43313006 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 100x13 mm M14 stainless steel wire dia. 0.50 mm angle grinders (1) Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder kpn: POS KBG 10013/M14 INOX 0,50 kpn_dash: kpn_clear: POSKBG10013M14INOX050 bkpn: PFERD POS KBG 10013/M14 INOX 0,50 bkpn_clear: PFERD POSKBG10013M14INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43313006 sr_ns: PFERD43313006
r: 04023590 p: 21.77 pid: 40458 b: PFERD q: 0 st: lt: 8 ean: 4007220593431 sr: PFERD 43313011 sr_no_br: 43313011 sr_no_br_cl: 43313011 sr_cl: PFERD43313011 sr_dash: sold: 21.77 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 20000 rpm Material (brush filament) Steel wire n: PFERD POS KBG 10013/M14 CT ST 0,50 Combitwist disc brush twisted Ø 100x13 mm M14 steel wire-Ø 0.50 mm - 43313011 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 100x13 mm M14 steel wire dia. 0.50 mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. ds: dsc: kts: Combitwist disc brush twisted Ø 100x13 mm M14 steel wire-Ø 0.50 mm kpn: POS KBG 10013/M14 CT ST 0,50 kpn_dash: kpn_clear: POSKBG10013M14CTST050 bkpn: PFERD POS KBG 10013/M14 CT ST 0,50 bkpn_clear: PFERD POSKBG10013M14CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43313011 sr_ns: PFERD43313011
r: 04023610 p: 61.16 pid: 38966 b: PFERD q: 0 st: lt: 10 ean: 4007220593486 sr: PFERD 43317013 sr_no_br: 43317013 sr_no_br_cl: 43317013 sr_cl: PFERD43317013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 12515/M14 CT INOX 0,35 Combitwist disc brush twisted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm - 43317013 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 125x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: Combitwist disc brush twisted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm kpn: POS KBG 12515/M14 CT INOX 0,35 kpn_dash: kpn_clear: POSKBG12515M14CTINOX035 bkpn: PFERD POS KBG 12515/M14 CT INOX 0,35 bkpn_clear: PFERD POSKBG12515M14CTINOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317013 sr_ns: PFERD43317013
r: 04023607 p: 58.26 pid: 38522 b: PFERD q: 0 st: lt: 8 ean: 4007220531174 sr: PFERD 43317003 sr_no_br: 43317003 sr_no_br_cl: 43317003 sr_cl: PFERD43317003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 12515/M14 INOX 0,35 disk brush knotted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder - 43317003 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 125x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush knotted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder kpn: POS KBG 12515/M14 INOX 0,35 kpn_dash: kpn_clear: POSKBG12515M14INOX035 bkpn: PFERD POS KBG 12515/M14 INOX 0,35 bkpn_clear: PFERD POSKBG12515M14INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317003 sr_ns: PFERD43317003
r: 08078026 p: 52.86 pid: 37116 b: PFERD q: 0 st: lt: 8 ean: 4007220003848 sr: PFERD 43317007 sr_no_br: 43317007 sr_no_br_cl: 43317007 sr_cl: PFERD43317007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 12515/M14 INOX 0,50 disk brush knotted Ø 125x15 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder - 43317007 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 125x15 mm M14 stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush knotted Ø 125x15 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder kpn: POS KBG 12515/M14 INOX 0,50 kpn_dash: kpn_clear: POSKBG12515M14INOX050 bkpn: PFERD POS KBG 12515/M14 INOX 0,50 bkpn_clear: PFERD POSKBG12515M14INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317007 sr_ns: PFERD43317007
r: 08078143 p: 51.75 pid: 37176 b: PFERD q: 0 st: lt: 8 ean: 4007220004500 sr: PFERD 43220115 sr_no_br: 43220115 sr_no_br_cl: 43220115 sr_cl: PFERD43220115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 95 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 1,1 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm n: PFERD KBU 9510/6 CO 120 1,10 disk brush unturned Ø 95x10 mm shank-Ø 6 mm ceramic filament wire-Ø 1.10 mm grit 120 - 43220115 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm ceramic filament dia. 1.10 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 95x10 mm shank-Ø 6 mm ceramic filament wire-Ø 1.10 mm grit 120 kpn: KBU 9510/6 CO 120 1,10 kpn_dash: kpn_clear: KBU95106CO120110 bkpn: PFERD KBU 9510/6 CO 120 1,10 bkpn_clear: PFERD KBU95106CO120110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220115 sr_ns: PFERD43220115
r: 08078144 p: 47.04 pid: 37180 b: PFERD q: 0 st: lt: 8 ean: 4007220004494 sr: PFERD 43220110 sr_no_br: 43220110 sr_no_br_cl: 43220110 sr_cl: PFERD43220110 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 95 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 1,1 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Material (brush filament) Silicon carbide n: PFERD KBU 9510/6 SiC 120 1,10 disk brush unturned Ø 95x10 mm pin-Ø 6 mm SiC filament wire-Ø 1.10 mm grit 120 - 43220110 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm SiC filament dia. 1.10 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 95x10 mm pin-Ø 6 mm SiC filament wire-Ø 1.10 mm grit 120 kpn: KBU 9510/6 SiC 120 1,10 kpn_dash: kpn_clear: KBU95106SiC120110 bkpn: PFERD KBU 9510/6 SiC 120 1,10 bkpn_clear: PFERD KBU95106SiC120110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220110 sr_ns: PFERD43220110
r: 08078127 p: 46.65 pid: 35157 b: PFERD q: 0 st: lt: 8 ean: 4007220936481 sr: PFERD 43225052 sr_no_br: 43225052 sr_no_br_cl: 43225052 sr_cl: PFERD43225052 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,15 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD KBUIT 7010/6 INOX 0,15 disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43225052 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD INOX-TOTAL bevel brush crimped KBUIT dia. 70x10 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: KBUIT 7010/6 INOX 0,15 kpn_dash: kpn_clear: KBUIT70106INOX015 bkpn: PFERD KBUIT 7010/6 INOX 0,15 bkpn_clear: PFERD KBUIT70106INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43225052 sr_ns: PFERD43225052
r: 04023598 p: 46.28 pid: 38939 b: PFERD q: 0 st: lt: 8 ean: 4007220593479 sr: PFERD 43315013 sr_no_br: 43315013 sr_no_br_cl: 43315013 sr_cl: PFERD43315013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 11515/M14 CT INOX 0,35 Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm - 43315013 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 115x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm kpn: POS KBG 11515/M14 CT INOX 0,35 kpn_dash: kpn_clear: POSKBG11515M14CTINOX035 bkpn: PFERD POS KBG 11515/M14 CT INOX 0,35 bkpn_clear: PFERD POSKBG11515M14CTINOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43315013 sr_ns: PFERD43315013
r: 08078012 p: 44.89 pid: 37100 b: PFERD q: 0 st: lt: 8 ean: 4007220003831 sr: PFERD 43315015 sr_no_br: 43315015 sr_no_br_cl: 43315015 sr_cl: PFERD43315015 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 11515/M14 CT INOX 0,50 Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.50 mm - 43315015 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 115x15 mm M14 stainless steel wire dia. 0.50 mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.50 mm kpn: POS KBG 11515/M14 CT INOX 0,50 kpn_dash: kpn_clear: POSKBG11515M14CTINOX050 bkpn: PFERD POS KBG 11515/M14 CT INOX 0,50 bkpn_clear: PFERD POSKBG11515M14CTINOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43315015 sr_ns: PFERD43315015
r: 08078013 p: 44.07 pid: 35585 b: PFERD q: 0 st: lt: 8 ean: 4007220220825 sr: PFERD 43315003 sr_no_br: 43315003 sr_no_br_cl: 43315003 sr_cl: PFERD43315003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 11515/M14 INOX 0,35 disk brush knotted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder - 43315003 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 115x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1) Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush knotted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder kpn: POS KBG 11515/M14 INOX 0,35 kpn_dash: kpn_clear: POSKBG11515M14INOX035 bkpn: PFERD POS KBG 11515/M14 INOX 0,35 bkpn_clear: PFERD POSKBG11515M14INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43315003 sr_ns: PFERD43315003
r: 08078136 p: 43.83 pid: 35172 b: PFERD q: 0 st: lt: 8 ean: 4007220004487 sr: PFERD 43220095 sr_no_br: 43220095 sr_no_br_cl: 43220095 sr_cl: PFERD43220095 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,55 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm n: PFERD KBU 8010/6 CO 120 0,55 disk brush unturned Ø 80x10 mm shank-Ø 6 mm ceramic filament wire-Ø 0.55 mm grit 120 - 43220095 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 80x10 mm shank dia. 6 mm ceramic filament dia. 0.55 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 80x10 mm shank-Ø 6 mm ceramic filament wire-Ø 0.55 mm grit 120 kpn: KBU 8010/6 CO 120 0,55 kpn_dash: kpn_clear: KBU80106CO120055 bkpn: PFERD KBU 8010/6 CO 120 0,55 bkpn_clear: PFERD KBU80106CO120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220095 sr_ns: PFERD43220095
r: 08078128 p: 43.59 pid: 35162 b: PFERD q: 0 st: lt: 8 ean: 4007220936498 sr: PFERD 43225057 sr_no_br: 43225057 sr_no_br_cl: 43225057 sr_cl: PFERD43225057 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,2 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD KBUIT 7010/6 INOX 0,20 disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43225057 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD INOX-TOTAL bevel brush crimped KBUIT dia. 70x10 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: KBUIT 7010/6 INOX 0,20 kpn_dash: kpn_clear: KBUIT70106INOX020 bkpn: PFERD KBUIT 7010/6 INOX 0,20 bkpn_clear: PFERD KBUIT70106INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43225057 sr_ns: PFERD43225057
