pferd_43220095
pferd_43220095_2
pferd_43220095_3
pferd_43220095
pferd_43220095_2
pferd_43220095_3
PFERD

PFERD KBU 8010/6 CO 120 0,55 disk brush unturned Ø 80x10 mm shank-Ø 6 mm ceramic filament wire-Ø 0.55 mm grit 120 - 43220095

53.03 tax incl.
€43.83 excl. VAT (incl. all environmental contributions)
On order: delivered from 03/09/2026
each

The minimum purchase order quantity for the product is 10.

  • Delivery by DHL

Product description

  • PFERD Bevel brush crimped KBU dia. 80x10 mm shank dia. 6 mm ceramic filament dia. 0.55 mm grit 120

Characteristics

  • Excellent for medium-duty brushing such as deburring, cleaning and derusting
  • Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness
  • For high stock removal values and aggressive brushing behaviour
  • Plastic filament withstands temperatures up to 220 °C

Advantages:

  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Optimal access to hard-to-reach areas such as inner edges, grooves and keyways.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Key features according to our expert
  • Brush diameter: 80 mm
  • Connection size (machine): 6 mm
  • Connection type (machine): Shank
  • Wire thickness: 0,55 mm
  • Twisted: No
  • Thickness: 10 mm
  • Max. no-load speed: 12000 rpm
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220004487
  • Supplier number: PFERD 43220095
Brush diameter
80 mm
Connection size (machine)
6 mm
Connection type (machine)
Shank
Wire thickness
0,55 mm
Twisted
No
Thickness
10 mm
Max. no-load speed
12000 rpm
Filling material
Ceramic grit (CO)
Workable materials 1
Bronze
Grit size
120
Processing tasks
Cleaning
Workable materials 12
Steel grades with hardness > 54 HRC
Length, trim
20
Processing tasks 1
Deburring
Workable materials 14
Titanium
Max. rpm
12000
ø outside metric
80
Workable materials 3
Cast steel
Workable materials 9
Other non-ferrous metals
Workable materials 7
Nickel-based alloys (e.g. Inconel and Hastelloy)
Workable materials 10
soft titanium alloys (tensile strength 500 N/mm²)
ø topping material
0.55
Rpm, opt., to
7800
Workable materials 5
Non-ferrous metal hard
Workable materials 13
Steel up to 1,200 N/mm² (< 38 HRC)
Workable materials 4
Cobalt-based alloys
Workable materials 6
Heat-resistant materials
Workable materials
Aluminium
Workable materials 2
Cast iron
Width metric
10
Processing tasks 2
Texturing (matting, seamless matting and satin)
Workable materials 11
Steel, cast steel
Workable materials 15
Titanium alloys
Recording system
Pin
Length, total
62
ø shaft metric
6
Workable materials 8
Nickel- or titanium-based superalloys
Rpm, opt., of
4800
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.