- Diameter: 20 mm
- Grit size: 80
- Shank size: 6 mm
Pferd abrasives: Poliflex grinding points, flap discs and brushes
Sanding, sharpening, polishing and deburring each call for a different abrasive, and this Pferd category brings them together: grinding points, flap discs, grinding sleeves, brushes and polishing tools for metalworking in the workshop and in production.
For the angle grinder there are POLIFAN flap discs of 125x22.23 mm, in curved and conical versions, with grits from 40 to 60 for steel and stainless steel. Grinding points work on the straight grinder: Poliflex grinding pins with different bonds, corundum flap brushes and POLINOX fleece grinding pens for fine grinding and finishing, mostly with a 6 mm shank. Ceramic grinding sleeves target high stock removal on stainless steel. Round brushes with steel wire or diamond filament deburr and clean, and felt pads are meant for pre-polishing.
Choose first by machine and mounting (arbor hole or shank), then by material and finally by grit: a low grit number for removal, a high one for finishing. The various shapes are split further into subcategories, and the whole group falls under Pferd surface treatment.
- Diameter: 25 mm
- Grit size: 150
- Shank size: 6 mm
- Diameter: 25 mm
- Grit size: 46
- Shank size: 6 mm
- Diameter: 125 mm
- Grit size: 40
- Bore size: 22,2 mm
- Diameter: 30 mm
- Grit size: 120
- Shank size: 6 mm
- Diameter: 125 mm
- Grit size: 60
- Bore size: 22,2 mm
- Diameter: 25 mm
- Grit size: 120
- Shank size: 6 mm
- Diameter (brush): 250 mm
- Connection type (machine): Bore
- Material (brush filament): Steel wire
- Diameter: 30 mm
- Suitable for (material): Non-ferrous metal; Stainless steel
- Height: 30 mm
- Diameter (brush): 100 mm
- Connection type (machine): Bore
- Material (brush filament): Steel wire
- Diameter: 125 mm
- Grit size: 60
- Bore size: 22,2 mm
- Diameter: 60 mm
- Connection type (machine): Shank
- Width: 50 mm
- Diameter: 60 mm
- Connection type (machine): Shank
- Width: 30 mm
- Diameter (brush): 22 mm
- Connection type (machine): Shank
- Material (brush filament): Plastic
- Diameter: 80 mm
- Connection type (machine): Bore
- Width: 10 mm
- Diameter (brush): 100 mm
- Connection type (machine): Shank
- Material (brush filament): Stainless steel
- Diameter: 125 mm
- Grit size: 40
- Bore size: 22,2 mm
- Diameter (brush): 250 mm
- Connection type (machine): Bore
- Material (brush filament): Stainless steel
- Diameter (brush): 10 mm
- Connection type (machine): Shank
- Material (brush filament): Steel wire
- Diameter (brush): 150 mm
- Connection type (machine): Bore
- Material (brush filament): Steel wire