r: 01052254 p: 1700.89 pid: 96780 b: FLUKE q: 0 st: lt: 14 ean: 0095969475822 sr: FLUKE 3362365 sr_no_br: 3362365 sr_no_br_cl: 3362365 sr_cl: FLUKE3362365 sr_dash: sold: 20410.68 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 773 mA process current clamp - 3362365 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values Measurement of signals from 4 to 20 mA with internal measurement Simultaneous internal measurement of mA with 24V loop power supply for powering and testing transmitters Generation of signals from 4 to 20 mA for testing I/Os or I/Ps of control systems mA output signal linearly increasing or stepped output signal (25% steps) Automatically change the output signal for remote testing from 4 to 20 mA DC voltage measurement to verify 24V power supplies or I/O voltage signals DC voltage source to test input components accepting signals from 1 to 5 V or 0 to 10 V Scaled mA output signal for a continuous mA signal corresponding to the 4 to 20 mA signal measured by the mA clamp Allows logging of mA signals on a separate logging device without interrupting the loop mA output signal for logging the 4 to 20 mA signal by means of a DMM with logging function or another instrument without interrupting the loop mA in/out: simultaneous measurement of the mA signal with the pliers and generation of a mA signal Sending a mA input signal to a device and measuring its output signal of 4 to 20 mA to components such as valves or mA isolating switches Voltage output linearly increasing or stepwise output signal (25% steps) Automatically change the voltage output for remote testing ds: dsc: Scope of delivery Four AA alkaline batteries (installed) Carrying case TL75 measuring leads AC72 detachable clamp TL940 measuring leads with mini-hooks Instruction sheet Hanging system with Velcro strap kts: mA process current clamp kpn: 773 kpn_dash: kpn_clear: 773 bkpn: FLUKE 773 bkpn_clear: FLUKE 773 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 3362365 sr_ns: FLUKE3362365
r: 02954126 p: 1859.403 pid: 73536 b: FLUKE q: 0 st: lt: 6 ean: 0095969590396 sr: FLUKE 3977194 sr_no_br: 3977194 sr_no_br_cl: 3977194 sr_cl: FLUKE3977194 sr_dash: sold: 14875.224 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789/E process meter with 24 V loop power supply - 3977194 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: Now compatible with Fluke Connect app The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. This instrument combines the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and Fluke Connect's wireless data logging capabilities with ShareLive video call function (sold separately), process engineers can now do much more while carrying much less. And with the built-in, selectable 250-ohm HART resistor, there's no need to carry a separate resistor either. Features of the Fluke 789 24V loop power supply Very large dual display Improved backlight with 2 brightness settings Max. permissible load resistance 1200 ohms at mA-source Heart mode setting with loop power supply and built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA generation for a quick 'span check' (checking zero and full scale) Externally accessible fuses that are easy to replace Infrared port for processing data in the FlukeView Forms software (V2.1) The Fluke 789 also has the following features of the Fluke 787 Accurate digital True-RMS multimeter, 1000 V, 440 mA DC voltage accuracy of 0.1% DC current measurement with 0.05% accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode and through-bell test Simultaneous display of mA and % scale 20 mA DC current source / loop calibrator / simulator Manual step function (100%, 25%, coarse, fine) plus automatic step and rise functions Externally accessible battery that can be easily replaced Safety standards Meets standards 1000 volts EN61010-1 CAT III and 600 volts EN61010-1 CAT IV. ds: dsc: Scope of delivery Fluke 789 ProcessMeter AC175 alligator clips Four (4) AA 1.5V alkaline batteries (installed) TL71 set of safety measuring leads kts: process meter with 24 V loop power supply kpn: 789/E kpn_dash: kpn_clear: 789E bkpn: FLUKE 789/E bkpn_clear: FLUKE 789E c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 3977194 sr_ns: FLUKE3977194
r: 02860918 p: 1573.246 pid: 71703 b: FLUKE q: 0 st: lt: 10 ean: 0095969819930 sr: FLUKE 4777186 sr_no_br: 4777186 sr_no_br_cl: 4777186 sr_cl: FLUKE4777186 sr_dash: sold: 6292.984 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 787B process meter - 4777186 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke i40s-EL current clamp is used for measuring low current, is capable of taking measurements of up to 40 A and also accurately measures secondary current transformers of 1 A and 5 A. The jaws of the i40s-EL can be clamped around conductors up to 15 mm in diameter Key features Doubles troubleshooting capabilities by combining the power of a safety-specified digital multimeter and a mA loop calibrator in a single, compact measuring instrument. Based on the familiar measurement capabilities of the 87 DMM and adds the ability to measure, generate and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, providing you with the ideal instrument for investigating and calibrating current loop applications. Compatibility with the Fluke Connect mobile app and desktop software allows technicians to wirelessly monitor, log and share data with their team from location, anytime, anywhere. (Fluke module IR3000FC required - not included) ds: dsc: Scope of delivery TL71 premium test lead set AC72 alligator clips Four AA alkaline batteries (included) Quick reference guide kts: process meter kpn: 787B kpn_dash: kpn_clear: 787B bkpn: FLUKE 787B bkpn_clear: FLUKE 787B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4777186 sr_ns: FLUKE4777186
r: 02951925 p: 5528 pid: 72693 b: FLUKE q: 0 st: lt: 8 ean: 0095969413862 sr: FLUKE 3023328 sr_no_br: 3023328 sr_no_br_cl: 3023328 sr_cl: FLUKE3023328 sr_dash: sold: 5528 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718EX 300G pressure calibrator (from -830 mbar to 20 bar) - 3023328 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 718 series of pressure calibrators (includes 4 models) offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. The unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features: Generates and measures pressure and milliamps for calibrating and maintaining almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges of 1 and 300 psi mean fewer additional instruments needed Ranges of 1, 30, 100 and 300 psi now available ds: dsc: kts: pressure calibrator (from -830 mbar to 20 bar) kpn: 718EX 300G kpn_dash: kpn_clear: 718EX300G bkpn: FLUKE 718EX 300G bkpn_clear: FLUKE 718EX300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 3023328 sr_ns: FLUKE3023328
r: 02958452 p: 1171.628 pid: 72248 b: FLUKE q: 0 st: lt: 6 ean: 0095969062565 sr: FLUKE 665091 sr_no_br: 665091 sr_no_br_cl: 665091 sr_cl: FLUKE665091 sr_dash: sold: 4686.512 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 705 loop calibrator - 665091 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: Powerful loop calibrator offering a highly cost-effective, integrated solution for calibration, repair and maintenance of milliamp loops. Provides simultaneous mA and % readout for fast, easy interpretation of readings. Delivers mA accuracy of 0.02%. Features push button with 25% steps for quick, easy linearity checks Other features: mA sourcing, simulation and measurement 0.02% accuracy and 0.001 mA resolution Simultaneous display of mA and % Selectable step or ramp outputs 24 V loop power supply with mA measurement 0-28 VDC measurement to monitor loop voltage Easy battery replacement without opening the housing Includes "span check" for quick confirmation of zero and span. Provides selectable slow ramp, fast ramp and step to provide smooth outputs for valve rotation and loop functional testing. Includes a 24-volt internal loop power supply, allowing you to power and read a transmitter simultaneously without a digital multimeter. Operates on a single 9 V battery that can be easily replaced without breaking the calibration seal. Offers 0 - 20 mA or 4 - 20 mA standard start-up modes. Comes with a protective yellow holster with storage for test leads and a three-year warranty. ds: dsc: Scope of delivery Fluke 705 Loop calibrator AC70A alligator clips C10 protective yellow holster with Flex-Stand Instruction sheet TL75 test lead kit designed to safety standards NIST traceable calibration report and data kts: loop calibrator kpn: 705 kpn_dash: kpn_clear: 705 bkpn: FLUKE 705 bkpn_clear: FLUKE 705 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 665091 sr_ns: FLUKE665091
r: 02021244 p: 1343.476 pid: 95025 b: FLUKE q: 0 st: lt: 15 ean: 0095969107150 sr: FLUKE 1617262 sr_no_br: 1617262 sr_no_br_cl: 1617262 sr_cl: FLUKE1617262 sr_dash: sold: 4030.428 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 707 Loop calibrator with Quick Click button - 1617262 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The fastest, one-handed instrument for loop checks. The Fluke 707 loop calibrator is a high-quality solution for calibration, repair and maintenance of current loops. The new ?Quick Click' button makes the instrument even faster and easier to use. This loop calibrator offers: One-handed user interface with ?Quick Click' dial Generates, simulates and measures mA 0.015% accuracy and 0.001 mA resolution Simultaneous display of mA and % of range Adjustable rise and step functions 24V loop power supply with mA measurements, including 250? HART resistor 0 ? 28 V measurements for loop voltage monitoring Battery can be easily replaced without opening the housing Compact housing with removable protective holster Three-year warranty ds: dsc: Scope of delivery AC70A crocodile clips C10 protective yellow holster with FlexStand Instruction sheet TL 75 fused test lead kit kts: Loop calibrator with Quick Click button kpn: 707 kpn_dash: kpn_clear: 707 bkpn: FLUKE 707 bkpn_clear: FLUKE 707 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 1617262 sr_ns: FLUKE1617262
f.id: callnameFacet f.v.keyword: temperature calibrator
r: 02958466 p: 1732.461 pid: 71456 b: FLUKE q: 0 st: lt: 15 ean: 0095969686402 sr: FLUKE 4387857 sr_no_br: 4387857 sr_no_br_cl: 4387857 sr_cl: FLUKE4387857 sr_dash: sold: 3464.922 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 712B/EN RTD temperature calibrator - 4387857 cn: TEMPERATURE CALIBRATOR cn2: TEMPERATURE CALIBRATOR cn_clear: TEMPERATURECALIBRATOR d: Product description: For the temperature calibration professional who wants a highly accurate, easy-to-use, single-function RTD temperature calibrator, the Fluke 712B is the ideal test instrument. Key features The 712B RTD calibrator can measure and simulate the resistance of (13) different types of RTD?s. Measure signals from 4 to 20 mA and generate a temperature signal at the same time Integrally designed suspension system included with each instrument Configurable 0% and 100% source settings for quick linearity checks in 25% increments Linear rise function and automatic rise function in 25% increments based on 0% and 100% settings Two inputs and backlit display for easy interpretation of measured values Switch-off settings are remembered at switch-on for quick restart of tests 1-year and 2-year specifications plus traceable calibration certificate ds: dsc: Scope of delivery Fluke 712B temperature calibrator Magnetic suspension system Batteries Manual Traceable calibration certificate Measurement leads kts: RTD temperature calibrator kpn: 712B/EN kpn_dash: kpn_clear: 712BEN bkpn: FLUKE 712B/EN bkpn_clear: FLUKE 712BEN c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature calibrator sr_no_br_cl_ns: 4387857 sr_ns: FLUKE4387857
r: 02954128 p: 1580.123 pid: 71468 b: FLUKE q: 0 st: lt: 10 ean: 0095969781817 sr: FLUKE 4604605 sr_no_br: 4604605 sr_no_br_cl: 4604605 sr_cl: FLUKE4604605 sr_dash: sold: 3160.246 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789 process meter with IR 3000 FC connector - 4604605 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: Now compatible with Fluke Connect app The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. This instrument combines the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and Fluke Connect's wireless data logging capabilities with ShareLive video call function (sold separately), process engineers can now do much more while carrying much less. And with the built-in, selectable 250-ohm HART resistor, there's no need to carry a separate resistor either. Features of the Fluke 789 24V loop power supply Very large dual display Improved backlight with 2 brightness settings Max. permissible load resistance 1200 ohms at mA-source Heart mode setting with loop power supply and built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA generation for a quick 'span check' (checking zero and full scale) Externally accessible fuses that are easy to replace Infrared port for processing data in the FlukeView Forms software (V2.1) The Fluke 789 also has the following features of the Fluke 787 Accurate digital True-RMS multimeter, 1000 V, 440 mA DC voltage accuracy of 0.1% DC current measurement with 0.05% accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode and through-bell test Simultaneous display of mA and % scale 20 mA DC current source / loop calibrator / simulator Manual step function (100%, 25%, coarse, fine) plus automatic step and rise functions Externally accessible battery that can be easily replaced Safety standards Meets standards 1000 volts EN61010-1 CAT III and 600 volts EN61010-1 CAT IV. ds: dsc: Scope of delivery Fluke 789 ProcessMeter IR3000 FC connector AC175 alligator clips Four (4) AA 1.5V alkaline batteries (installed) TL71 set of safety measuring leads kts: process meter with IR 3000 FC connector kpn: 789 kpn_dash: kpn_clear: 789 bkpn: FLUKE 789 bkpn_clear: FLUKE 789 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4604605 sr_ns: FLUKE4604605
r: 02953467 p: 1347.337 pid: 72119 b: FLUKE q: 0 st: lt: 8 ean: 0095969475815 sr: FLUKE 3362352 sr_no_br: 3362352 sr_no_br_cl: 3362352 sr_cl: FLUKE3362352 sr_dash: sold: 2694.674 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 772 mA current clamp - 3362352 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of the range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values Measurement of signals from 4 to 20 mA with internal measurement Simultaneous internal measurement of mA with 24V loop power supply for powering and testing transmitters Generation of signals from 4 to 20 mA for testing I/Os or I/Ps of control systems mA output signal linearly increasing or stepped output signal (25% steps) Automatically change the output signal for remote testing from 4 to 20 mA ds: dsc: Scope of delivery Four AA alkaline batteries (installed) Carrying case TL75 measuring leads AC72 detachable clamp TL940 measuring leads with mini-hooks Instruction sheet Hanging system with Velcro strap kts: mA current clamp kpn: 772 kpn_dash: kpn_clear: 772 bkpn: FLUKE 772 bkpn_clear: FLUKE 772 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 3362352 sr_ns: FLUKE3362352
r: 37990014 p: 1952.566 pid: 72991 b: FLUKE q: 0 st: lt: 15 ean: 0095969050692 sr: FLUKE 620101 sr_no_br: 620101 sr_no_br_cl: 620101 sr_cl: FLUKE620101 sr_dash: sold: 1952.566 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 715 Volt/mA calibrator - 620101 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 715 V/mA calibrator delivers excellent performance and is extremely durable and reliable. This calibrator comes in the package with the rugged Fluke 80-series DMM. It is compact, lightweight, and easy to carry. The 715 is easy to use thanks to its push-button interface, which is similar to that of the Fluke 740-series multifunction documenting process calibrators. It is resistant to EMI, dust and splash water, and features a removable battery cover that allows quick battery replacement. Key features Measure loop current signals (0-20 mA, 4-20 mA) with a very high accuracy of 0.015% and a resolution of 1 mA Measure the output voltage signals of a process, coming from PLCs or transmitters Generate or simulate a loop current of 24 mA Supply voltage up to 100 mV or 10 V 24-V loop power supply with simultaneous current measurement Extra accuracy when measuring and generating voltage and current Longer battery life 250-ohm HART resistor with loop power supply Holster includes a storage compartment for test leads Compatible with the magnet pendant system for tool sets Gradual and linear rising output function Adjustable zero position and adjustable range ds: dsc: Scope of delivery Fluke 715 Volt/mA calibrator including: Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: Volt/mA calibrator kpn: 715 kpn_dash: kpn_clear: 715 bkpn: FLUKE 715 bkpn_clear: FLUKE 715 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 620101 sr_ns: FLUKE620101
r: 08106945 p: 1234 pid: 74198 b: FLUKE q: 0 st: lt: 8 ean: 0095969674133 sr: FLUKE 4353550 sr_no_br: 4353550 sr_no_br_cl: 4353550 sr_cl: FLUKE4353550 sr_dash: sold: 1234 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700GA5 precision pressure test gauge 30 PSIA - 4353550 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 30 PSIA kpn: 700GA5 kpn_dash: kpn_clear: 700GA5 bkpn: FLUKE 700GA5 bkpn_clear: FLUKE 700GA5 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353550 sr_ns: FLUKE4353550
r: 37990118 p: 942.773 pid: 72224 b: FLUKE q: 0 st: lt: 11 ean: 0095969349697 sr: FLUKE 2646347 sr_no_br: 2646347 sr_no_br_cl: 2646347 sr_cl: FLUKE2646347 sr_dash: sold: 942.773 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 771 mA process current clamp - 2646347 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of the range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values ds: dsc: Scope of delivery Carrying case User manual kts: mA process current clamp kpn: 771 kpn_dash: kpn_clear: 771 bkpn: FLUKE 771 bkpn_clear: FLUKE 771 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 2646347 sr_ns: FLUKE2646347
r: 08122533 p: 17819.2 pid: 166269 b: FLUKE q: 0 st: lt: 8 ean: 0195112030905 sr: FLUKE 5300476 sr_no_br: 5300476 sr_no_br_cl: 5300476 sr_cl: FLUKE5300476 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. pressure 42 bar n: FLUKE 729 PRO 4M automatic pressure calibrator (-0.9 to 40 bar) - 5300476 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Automatic pressure build-up and control up to 600 psi Interchangeable pressure control modules Reaches high pressure set points quickly, so you get more done Built-in test template, easy one-button documented calibration HART communication Pressure leakage tests Automatic pressure fine-tuning, automatic pressure stabilisation Powerful Li-ion battery Extended measuring range with 750P series pressure modules Temperature measurements with 720RTD thermocouple Bright two/three colour graphical display Robust and portable design with 3-year warranty as standard ds: dsc: Scope of delivery Automatic pressure calibrator 729 Pro AC-DC converter Power cord Rechargeable Li-ion battery Tape measure lead set AC280 Sure Grip Hook Set (red and black) Alligator clips (red and black) One set of TP220 measuring pens (red and black) USB communication cable: Type-A for PC to mini-B for the device (1 m) Flexible hose (diameter 2 mm, length 1.5 m) Fitting: 1/8" NPT female thread x 1/4" NPT female thread Fitting: 1/8" NPT male thread x 1/4" NPT male thread 13 Fitting: 1/8 inch NPT female thread x M20 female thread 14 Fitting: 1/4 inch BSP female thread x 1/8 inch NPT female thread PTFE tape Pressure measuring module (PMM) Hose for draining condensed water generated in the product. Diameter 1/8 inch, length 0.3 m Adjustable strap with quick connector for hanging the product Safety information Traceable calibration report with data kts: automatic pressure calibrator (-0.9 to 40 bar) kpn: 729 PRO 4M kpn_dash: kpn_clear: 729PRO4M bkpn: FLUKE 729 PRO 4M bkpn_clear: FLUKE 729PRO4M c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 5300476 sr_ns: FLUKE5300476
r: 08122534 p: 16478.016 pid: 166247 b: FLUKE q: 0 st: lt: 8 ean: 0195112030912 sr: FLUKE 5300483 sr_no_br: 5300483 sr_no_br_cl: 5300483 sr_cl: FLUKE5300483 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. pressure 69 bar n: FLUKE 729 PRO 7M automatic pressure calibrator (-0.9 to 70 bar) - 5300483 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Automatic pressure build-up and control up to 1000 psi Interchangeable pressure control modules Reaches high pressure set points quickly, so you get more done Built-in test template, easy one-button documented calibration HART communication Pressure leakage tests Automatic pressure fine-tuning, automatic pressure stabilisation Powerful Li-ion battery Extended measuring range with 750P series pressure modules Temperature measurements with 720RTD thermocouple Bright two/three colour graphical display Robust and portable design with 3-year warranty as standard ds: dsc: Scope of delivery Automatic pressure calibrator 729 Pro AC-DC converter Power cord Rechargeable Li-ion battery Tape measure lead set AC280 Sure Grip Hook Set (red and black) Alligator clips (red and black) One set of TP220 measuring pens (red and black) USB communication cable: Type-A for PC to mini-B for the device (1 m) Flexible hose (diameter 2 mm, length 1.5 m) Fitting: 1/8" NPT female thread x 1/4" NPT female thread Fitting: 1/8" NPT male thread x 1/4" NPT male thread 13 Fitting: 1/8 inch NPT female x M20 female thread 14 Fitting: 1/4 inch BSP female thread x 1/8 inch NPT female thread PTFE tape Pressure measuring module (PMM) Hose for draining condensed water generated in the product. Diameter 1/8 inch, length 0.3 m Adjustable strap with quick connector for hanging the product Safety information Traceable calibration report with data kts: automatic pressure calibrator (-0.9 to 70 bar) kpn: 729 PRO 7M kpn_dash: kpn_clear: 729PRO7M bkpn: FLUKE 729 PRO 7M bkpn_clear: FLUKE 729PRO7M c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 5300483 sr_ns: FLUKE5300483
r: 02952060 p: 15883.01 pid: 73431 b: FLUKE q: 0 st: lt: 8 ean: 0095969840408 sr: FLUKE 4856976 sr_no_br: 4856976 sr_no_br_cl: 4856976 sr_cl: FLUKE4856976 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 300G automatic pressure calibrator (20 bar) - 4856976 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (20 bar) kpn: 729 300G kpn_dash: kpn_clear: 729300G bkpn: FLUKE 729 300G bkpn_clear: FLUKE 729300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856976 sr_ns: FLUKE4856976
r: 02951958 p: 15883.01 pid: 72701 b: FLUKE q: 0 st: lt: 8 ean: 0095969840323 sr: FLUKE 4856894 sr_no_br: 4856894 sr_no_br_cl: 4856894 sr_cl: FLUKE4856894 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 150G FC automatic pressure calibrator (10 bar) - 4856894 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: FC automatic pressure calibrator (10 bar) kpn: 729 150G kpn_dash: kpn_clear: 729150G bkpn: FLUKE 729 150G bkpn_clear: FLUKE 729150G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856894 sr_ns: FLUKE4856894
r: 02952061 p: 15883.01 pid: 72721 b: FLUKE q: 0 st: lt: 8 ean: 0095969840415 sr: FLUKE 4856983 sr_no_br: 4856983 sr_no_br_cl: 4856983 sr_cl: FLUKE4856983 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 150G FC automatic pressure calibrator (10 bar) - 4856983 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the starting and ending pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (10 bar) kpn: 729 150G FC kpn_dash: kpn_clear: 729150GFC bkpn: FLUKE 729 150G FC bkpn_clear: FLUKE 729150GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856983 sr_ns: FLUKE4856983
r: 02951959 p: 13598.57 pid: 71197 b: FLUKE q: 0 st: lt: 8 ean: 0095969840316 sr: FLUKE 4856882 sr_no_br: 4856882 sr_no_br_cl: 4856882 sr_cl: FLUKE4856882 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 300G FC automatic pressure calibrator (20 bar) - 4856882 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (20 bar) kpn: 729 300G FC kpn_dash: kpn_clear: 729300GFC bkpn: FLUKE 729 300G FC bkpn_clear: FLUKE 729300GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856882 sr_ns: FLUKE4856882
r: 02951954 p: 13598.57 pid: 72068 b: FLUKE q: 0 st: lt: 8 ean: 0095969840330 sr: FLUKE 4856907 sr_no_br: 4856907 sr_no_br_cl: 4856907 sr_cl: FLUKE4856907 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 30G FC automatic pressure calibrator (2 bar) - 4856907 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (2 bar) kpn: 729 30G FC kpn_dash: kpn_clear: 72930GFC bkpn: FLUKE 729 30G FC bkpn_clear: FLUKE 72930GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856907 sr_ns: FLUKE4856907
r: 02952062 p: 13598.57 pid: 71215 b: FLUKE q: 0 st: lt: 8 ean: 0095969840422 sr: FLUKE 4856990 sr_no_br: 4856990 sr_no_br_cl: 4856990 sr_cl: FLUKE4856990 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 30G automatic pressure calibrator (2 bar) - 4856990 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (2 bar) kpn: 729 30G kpn_dash: kpn_clear: 72930G bkpn: FLUKE 729 30G bkpn_clear: FLUKE 72930G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856990 sr_ns: FLUKE4856990
