Product description:
- The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind.
- This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results.
- Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package.
- The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached.
- Then the internal fine adjustment automatically stabilises the pressure to the requested value.
- The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results.
- Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level.
- The 729 does the rest.
- Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values.
- Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data.
- With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them.
Key features:
- Automatic pressure build-up and control up to 300 psi
- Easy process documentation with built-in test templates
- Automatic internal pressure fine-tuning
- Measure, generate and simulate signals from 4 to 20 mA
- 24V loop power supply for powering transmitters for tests
- Clear two/three-channel colour graphic display
- HART communication for testing smart HART transmitters
- Built-in leak test for checking test fixtures for leakage
- Rugged portable design with standard 3-year warranty
- Compatibility with the Fluke Connect app
- Temperature measurements with optional 720RTD thermocouple
- V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC
- Compatible with 700-series and 750-series pressure modules
- Uploading of documented test results to DPCTrack2 calibration management software
- Innovative semi-rigid carrying case specially designed for on-site work
- Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached.
- Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test.
- Easy documentation of calibration using defined templates for transmitters and switches.
- Type in the start and end pressures and number of measurement points.
- The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point.
- The bright colour graphic display warns in red of test results that are out of tolerance.
- Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings.
- There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups.
- HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters.
- You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting.
- Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data.
- Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices.
- andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system.
- Rugged portable designWith [26]
- Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events.
- Share measurements using ShareLive video calls and emails.
- Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations.
- Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired.
- Support in different languages:: select a language in the instrument configuration programme.
- HART communication commands are limited to English, according to HART equipment descriptors and protocol.
- Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations.
