r: 08106995 p: 459.68 pid: 158873 b: FLUKE q: 0 st: lt: 8 ean: 0095969854252 sr: FLUKE 4910524 sr_no_br: 4910524 sr_no_br_cl: 4910524 sr_cl: FLUKE4910524 sr_dash: sold: 459.68 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T6-600/62MAX+/1ACE electric tester with infrared thermometer and 1AC II in soft carrying case - 4910524 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description T6-600 FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage (Voltage measurement requires a capacitive earth connection, provided by the user in most applications. In some situations earthing via the measurement lead is required) 1 to 600 V AC 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 2000 Ohm Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase Product description 62 MAX+ Dust and water resistance: conforms to protection class IP54, making it dust- and waterproof. Robustness: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carrying strap and fits easily into your toolbox. Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when measured values fall outside the limits. Power supply: both the 62 MAX and 62 MAX+ are powered by a single standard AA battery. Product description 1AC II Voltbeat technology and continuous self-test - so you always know it is working When voltage is detected, the dot lights up and a beep sounds CAT IV 1000 V for extra protection Extended range: 0 V to 1000 V AC or 200 V to 1000 V AC, depending on model ds: dsc: Scope of delivery T6-600 electrical tester 62 MAX+ infrared thermometer 1AC II VoltAlert electrical tester C60 soft carrying case kts: electric tester with infrared thermometer and 1AC II in soft carrying case kpn: T6-600/62MAX+/1ACE kpn_dash: T6 kpn_clear: T660062MAX1ACE bkpn: FLUKE T6-600/62MAX+/1ACE bkpn_clear: FLUKE T660062MAX1ACE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4910524 sr_ns: FLUKE4910524
r: 03388507 p: 148.434 pid: 178051 b: FLUKE q: 0 st: lt: 10 ean: 0195112151549 sr: FLUKE 6101437 sr_no_br: 6101437 sr_no_br_cl: 6101437 sr_cl: FLUKE6101437 sr_dash: sold: 445.302 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Continuity test Yes Max. current AC/DC 10 A Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 100 kHz Max. resistance 40 MOhm n: FLUKE 107 digital pocket multimeter - 6101437 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Compact, easy-to-use palm-sized digital multimeter Small enough to fit in a breast pocket, but rugged enough to withstand daily use, including a 1 metre drop test For everyday applications where True RMS accuracy is not required Comfortable grip, weighs only 200 g and is easy to carry Safety specification CAT III 600 V Current and voltage measurements Measures resistance and continuity to check for broken wires Data Hold and backlit display for safe and fast operation Key functions AC and DC voltage Alternating and direct current Resistance Capacitance Diode Frequency and duty cycle ds: dsc: Scope of delivery 107 palm-sized digital multimeter 1 pair TL75 measuring leads 2 AAA alkaline batteries SmartStrap intelligent magnetic, multifunctional carrying strap kts: digital pocket multimeter kpn: 107 kpn_dash: kpn_clear: 107 bkpn: FLUKE 107 bkpn_clear: FLUKE 107 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101437 sr_ns: FLUKE6101437
r: 03395576 p: 141.545 pid: 179420 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969620208 sr: FLUKE 5065894 sr_no_br: 5065894 sr_no_br_cl: 5065894 sr_cl: FLUKE5065894 sr_dash: sold: 424.635 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 500 °C Optical ratio 10:1 Power supply 1 x AA Accuracy ± 1,5 °C n: FLUKE 62 MAX infrared thermometer with 1 laser dot - 5065894 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Instantly measures the temperature of equipment in hard-to-reach or hazardous areas Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Robust: tested to withstand a 3-metre drop Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Key features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two readings. Alarm: Alarms Hi and Lo for too high and too low values indicate when readings fall outside the limits. Powered by a single standard AA battery. ds: dsc: kts: infrared thermometer with 1 laser dot kpn: 62 MAX kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 5065894 sr_ns: FLUKE5065894
r: 02958394 p: 190.087 pid: 72237 b: FLUKE q: 0 st: lt: 10 ean: 0095969723572 sr: FLUKE 4459442 sr_no_br: 4459442 sr_no_br_cl: 4459442 sr_cl: FLUKE4459442 sr_dash: sold: 380.174 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FLK-a3002 FC Wireless AC/DC power module - 4459442 cn: VOLTMETER cn2: VOLTMETER cn_clear: VOLTMETER d: Key features: The Fluke a3002 FC wireless AC/DC current clamp module is designed for use with the i410 or i1010 AC/DC current clamps (not included with this module). The a3002 FC AC/DC current module wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 thermal imager PC via optional pc3000 FC adapter Fluke Connect Mobile App Some of the Key Features: of the Fluke a3002 FC: Measurement up to 400 A AC or 400 A DC with the i410 (sold separately) Measurement up to 600 A AC or 1000 A DC with the i1010 (sold separately) Use as a stand-alone meter or as part of the system Log function to record and store up to 65,000 measured values Product description: All the facts, right on site. The Fluke A3002 FC wireless AC power module is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Connect the A3002 FC current module, or one of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. The Fluke Connect measuring instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Detect intermittent electrical faults without getting stuck Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We've solved that problem with Fluke Connect - leave your remote modules plugged in to log readings and leave the site to tackle other problems. You can then download the data for further analysis. Work safely near electrical distributors with less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more A3002 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Faster and cheaper 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect current clamp to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Perform 3-phase measurements in 1/3 the time. Add your laptop and go from logging immediately to analysis and diagnosis. You can solve problems faster by seeing live measurements from multiple measurement points on a single screen. With the A3002 FC current modules, the following is possible: Make 3-phase measurements in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit load. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery True-RMS AC/DC power module Magnetic suspension strap kts: Wireless AC/DC power module kpn: FLK-a3002 FC kpn_dash: FLK kpn_clear: FLKa3002FC bkpn: FLUKE FLK-a3002 FC bkpn_clear: FLUKE FLKa3002FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Voltmeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke voltmeter sr_no_br_cl_ns: 4459442 sr_ns: FLUKE4459442
r: 08107003 p: 344.213 pid: 166180 b: FLUKE q: 0 st: lt: 8 ean: 0095969786652 sr: FLUKE 4637005 sr_no_br: 4637005 sr_no_br_cl: 4637005 sr_cl: FLUKE4637005 sr_dash: sold: 344.213 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T150/PRV240 voltage and continuity tester + electrical tester - 4637005 cn: VOLTMETER cn2: VOLTMETER cn_clear: VOLTMETER d: Product description T150 Two-pole voltage and continuity tester With large, easy-to-use keys, a bright backlight and clear audible and tactile indicators designed for any work situation Resistance measurements up to 1999 Ohm Display Hold (frozen display) Improved ergonomic design for easy use (even with gloves on) and with a quick, safe cap for the measuring pins Product description PRV240 Reduces the risk of shock and arcing by checking measuring instruments for performance without entering a potentially hazardous electrical environment Generates both stationary AC and DC voltage - generates 240 V DC/AC Compatible with both high and low impedance multimeters as well as current clamps and electrical testers ds: dsc: Scope of delivery T150 voltage and continuity tester with illuminated LCD and additional resistance measurement PRV240 electrical tester TPAK magnetic suspension strap kts: voltage and continuity tester + electrical tester kpn: T150/PRV240 kpn_dash: kpn_clear: T150PRV240 bkpn: FLUKE T150/PRV240 bkpn_clear: FLUKE T150PRV240 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Voltmeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke voltmeter sr_no_br_cl_ns: 4637005 sr_ns: FLUKE4637005
r: 03395578 p: 161.214 pid: 179754 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969620215 sr: FLUKE 5065907 sr_no_br: 5065907 sr_no_br_cl: 5065907 sr_cl: FLUKE5065907 sr_dash: sold: 322.428 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 650 °C Optical ratio 12:1 Power supply 1 x AA Accuracy ± 1 °C n: FLUKE 62 MAX+ infrared thermometer with 2 laser points - 5065907 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Instantly measures the temperature of equipment in hard-to-reach or hazardous areas Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Robust: tested to withstand a 3-metre drop Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Key features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when readings fall outside the limits. Powered by a single standard AA battery. ds: dsc: kts: infrared thermometer with 2 laser points kpn: 62 MAX+ kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX+ bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 5065907 sr_ns: FLUKE5065907
r: 02909141 p: 282.153 pid: 73186 b: FLUKE q: 0 st: lt: 10 ean: 0095969692045 sr: FLUKE 4401588 sr_no_br: 4401588 sr_no_br_cl: 4401588 sr_cl: FLUKE4401588 sr_dash: sold: 282.153 p_range: none type: standard act: 1 avo: 1 av: Max. current AC/DC 400 A n: FLUKE A3000 FC wireless AC current clamp module - 4401588 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The Fluke a3000 FC wireless AC current clamp module is a fully functional True-RMS current clamp that wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke a3000 FC wireless AC current clamp module has all the necessary functions and features for easy troubleshooting when testing and measuring: True-RMS AC current clamp Measurement of up to 400 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function Product description: Viewing. Saving. Sharing. All the facts, right on site. The Fluke a3000 FC wireless AC current clamp module is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical dividers. It's simple. Connect the a3000 FC current clamp module, or any of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. The Fluke Connect measuring instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Detect intermittent electrical faults without getting stuck Timing is all-important when you are trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We've solved that problem with Fluke Connect - leave your remote modules plugged in to log readings and leave the site to tackle other problems. You can then download the data for further analysis. Work safely near electrical distributors with less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more a3000 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Faster and cheaper 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect current clamp to each phase. Close the cabinet, re-energise and read the readings. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Take 3-phase measurements in 1/3 the time. Add your laptop and go from logging straight to analysis and diagnostics. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. With the a3000 FC current clamp modules, the following is possible: Take 3-phase measurements in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit loads. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: kts: wireless AC current clamp module kpn: A3000 FC kpn_dash: kpn_clear: A3000FC bkpn: FLUKE A3000 FC bkpn_clear: FLUKE A3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke current clamp sr_no_br_cl_ns: 4401588 sr_ns: FLUKE4401588
r: 08106940 p: 28709.201 pid: 166159 b: FLUKE q: 0 st: lt: 8 ean: 0095969348249 sr: FLUKE 2637634 sr_no_br: 2637634 sr_no_br_cl: 2637634 sr_cl: FLUKE2637634 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1760 TR INTL three-phase power quality recorder, topas - 2637634 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Fully Class A compliant: perform tests in accordance with the strict international standard IEC 61000-4-30 Class A GPS time synchronisation: Accurately correlate data with events or data sets from other instruments Flexible and fully configurable thresholds and scaling factors: Allows the user to pinpoint specific problems by defining very detailed fault detection and recording criteria. Uninterrupted power supply (40 minutes): Never miss important events - additionally records the beginning and end of interruptions to identify the cause Registration waveforms of 10 MHz, 6000 Vpk: Delivers a detailed image of even the shortest event 2 GB data memory: Detailed, simultaneous recording of multiple power parameters for long periods of time Includes comprehensive software: Provides trend graphs to analyse the actual cause, and for statistical summaries, reporting and real-time data monitoring when used online Connect and ready: Quick to install with automatic sensor detection. The sensors are powered by the instrument. So you do not need batteries. Robust design for the field: insulated housing and a solid-state design without rotating components allow reliable testing in almost all conditions ds: dsc: Scope of delivery Internal Flash memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct connection to PC (1) Power supply cable (1) Operating manuals Carrying case Fast transient analysis up to 10 MHz kts: three-phase power quality recorder, topas kpn: 1760 TR INTL kpn_dash: kpn_clear: 1760TRINTL bkpn: FLUKE 1760 TR INTL bkpn_clear: FLUKE 1760TRINTL c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 2637634 sr_ns: FLUKE2637634
r: 08121747 p: 28215.152 pid: 166038 b: FLUKE q: 0 st: lt: 8 ean: 0195112129272 sr: FLUKE 6018282 sr_no_br: 6018282 sr_no_br_cl: 6018282 sr_cl: FLUKE6018282 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii915/FPC3 Acoustic Imager in case (with 3 years Premium Care) - 6018282 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Enhanced performance: Improved detection performance for gas leaks, electrical discharges and mechanical problems. LeakQ mode: Estimated leak size and cost estimation. PDQ mode: Assesses the severity of the discharge. MecQ mode: Proactively addresses potential problems in rotating mechanical components. Reporting features: Integrated functionality for visual and textual tagging and annotation for streamlined reporting. Wireless upload: Easy transfer of data to Fluke Connect. The Fluke ii915 Acoustic Imager with LeakQ, PDQ Mode and MecQ Mode helps maintenance teams detect, locate and assess gas leaks, partial discharges and potential mechanical anomalies. The multi-award-winning industrial imaging (II) series is user-friendly and has an intuitive interface that promotes acceptance by the entire maintenance team. Maintenance teams can stay ahead of potential problems by efficiently scanning large areas of interest, allowing maintenance teams to take proactive steps and optimise system performance. Standard 3-year premium care. ds: dsc: Scope of delivery ii915 Acoustic Imager USB-C charger with country-specific connectors. Robust lithium-ion battery set USB-C cable Robust carrying case Adjustable carrying and neck strap Sensor array protection kts: Acoustic Imager in case (with 3 years Premium Care) kpn: ii915/FPC3 kpn_dash: kpn_clear: ii915FPC3 bkpn: FLUKE ii915/FPC3 bkpn_clear: FLUKE ii915FPC3 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6018282 sr_ns: FLUKE6018282
r: 08121746 p: 24302.631 pid: 166037 b: FLUKE q: 0 st: lt: 8 ean: 0195112129234 sr: FLUKE 6017836 sr_no_br: 6017836 sr_no_br_cl: 6017836 sr_cl: FLUKE6017836 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii915/FPC Acoustic Imager in case (with 1 year Premium Care) - 6017836 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Enhanced performance: Improved detection performance for gas leaks, electrical discharges and mechanical problems. LeakQ mode: Estimated leak size and cost estimation. PDQ mode: Assesses the severity of the discharge. MecQ mode: Proactively addresses potential problems in rotating mechanical components. Reporting features: Integrated functionality for visual and textual tagging and annotation for streamlined reporting. Wireless upload: Easy transfer of data to Fluke Connect. The Fluke ii915 Acoustic Imager with LeakQ, PDQ Mode and MecQ Mode helps maintenance teams detect, locate and assess gas leaks, partial discharges and potential mechanical anomalies. The multi-award-winning industrial imaging (II) series is user-friendly and has an intuitive interface that promotes acceptance by the entire maintenance team. Maintenance teams can stay ahead of potential problems by efficiently scanning large areas of interest, allowing maintenance teams to take proactive steps and optimise system performance. ds: dsc: Scope of delivery ii915 Acoustic Imager USB-C charger with country-specific connectors. Robust lithium-ion battery set USB-C cable Robust carrying case Adjustable carrying and neck strap Sensor array protection kts: Acoustic Imager in case (with 1 year Premium Care) kpn: ii915/FPC kpn_dash: kpn_clear: ii915FPC bkpn: FLUKE ii915/FPC bkpn_clear: FLUKE ii915FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6017836 sr_ns: FLUKE6017836
r: 08106941 p: 23774.49 pid: 74194 b: FLUKE q: 0 st: lt: 8 ean: 0095969348232 sr: FLUKE 2637629 sr_no_br: 2637629 sr_no_br_cl: 2637629 sr_cl: FLUKE2637629 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1760TR Basic Topas three-phase power quality recorder with 8 input channels - 2637629 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Fully Class A compliant: perform tests in accordance with the strict international standard IEC 61000-4-30 Class A GPS time synchronisation: Accurately correlate data with events or data sets from other instruments Flexible and fully configurable thresholds and scaling factors: Allows the user to pinpoint specific problems by defining very detailed fault detection and recording criteria. Uninterrupted power supply (40 minutes): Never miss important events - additionally records the beginning and end of interruptions to identify the cause Registration waveforms of 10 MHz, 6000 Vpk: Delivers a detailed image of even the shortest event 2 GB data memory: Detailed, simultaneous recording of multiple power parameters for long periods of time Includes comprehensive software: Provides trend graphs to analyse the actual cause, and for statistical summaries, reporting and real-time data monitoring when used online Connect and ready: Quick to install with automatic sensor detection. The sensors are powered by the instrument. So you do not need batteries. Robust field design: Insulated housing and a solid-state design without rotating components allow reliable testing in almost all conditions Meets Class A requirements for the most demanding mains power test The Fluke 1760 three-phase Power Quality Recorder is fully compliant with IEC 61000-4-30 Class A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and high-voltage networks, this power quality tester offers the flexibility to customise thresholds, algorithms and measurement settings. The Fluke 1760 power quality recorder records the most comprehensive details on user-selected parameters. Applications Comprehensive fault analysis - Perform rapid transient analysis and determine the actual cause of equipment failures, to prevent them in the future and for predictive maintenance. Fast transient analysis with a measurement range of6000 V allows recording of very short impulses, e.g. lightning strikes. Class A service quality compliance - Validating incoming mains power quality at the service input. Because the Fluke 1760 is Class A compliant, verification results are absolutely reliable. Correlate events at multiple locations - Using GPS time synchronisation, users can quickly determine where a fault first occurred, inside or outside the plant. Galvanic isolation and DC coupling - Allows complete measurements to be made on disparate power systems. For example, locating problems in UPS systems by simultaneously measuring battery voltage and delivered power. Assess mains power quality and power loads - Assess basic mains power quality to validate compatibility with critical systems before installation, and check electrical system capacity before adding loads. ds: dsc: Scope of delivery Internal Flash memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct connection to PC (1) Power supply cable (1) Operating manuals Carrying case Fast transient analysis up to 10 MHz kts: Topas three-phase power quality recorder with 8 input channels kpn: 1760TR Basic kpn_dash: kpn_clear: 1760TRBasic bkpn: FLUKE 1760TR Basic bkpn_clear: FLUKE 1760TRBasic c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 2637629 sr_ns: FLUKE2637629
r: 08121798 p: 22446.669 pid: 166317 b: FLUKE q: 0 st: lt: 8 ean: 0195112030240 sr: FLUKE 5293744 sr_no_br: 5293744 sr_no_br_cl: 5293744 sr_cl: FLUKE5293744 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE RSE600/C 60Hz thermal imaging camera 640x480 with mounting system - 5293744 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description Software compatibility with MATLAB and LabVIEW allows users to integrate infrared data, images and video to support R&D analysis;. 640 x 480 resolution See the details you need with optional smart lenses: 2x and 4x telephoto, wide-angle and macro lenses. Optimise images, generate customisable reports and export images in the format of your choice with SmartView desktop software Wirelessly connect your camera to the Fluke Connect system to easily share and edit images ds: dsc: Scope of delivery Infrared camera with standard infrared lens (640 x 480 image resolution) Power supply Ethernet cable Lens cap Carrying case kts: thermal imaging camera 640x480 with mounting system kpn: RSE600/C 60Hz kpn_dash: kpn_clear: RSE600C60Hz bkpn: FLUKE RSE600/C 60Hz bkpn_clear: FLUKE RSE600C60Hz c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5293744 sr_ns: FLUKE5293744
r: 08121744 p: 22002.631 pid: 166040 b: FLUKE q: 0 st: lt: 8 ean: 0195112129265 sr: FLUKE 6018211 sr_no_br: 6018211 sr_no_br_cl: 6018211 sr_cl: FLUKE6018211 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii905/FPC3 Acoustic Imager in case (with 3 years Premium Care) - 6018211 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Easy, fast and safe visual detection of gas leaks with LeakQ mode, including estimated leak size and cost. The 7-inch LCD touchscreen projects a SoundMap over visual images for quick identification of leak location. Integrated visual and textual tagging and annotation features provide key details to optimise reporting and follow-up actions. Wirelessly upload to Fluke Connect on the go The Fluke ii905 Acoustic Imager with LeakQ helps maintenance teams detect, locate and assess gas and vacuum leaks. The algorithms and analysis software on the device in LeakQ mode estimate the size and cost of a leak. Integrated visual and textual tagging and annotation features provide key details to optimise reporting and follow-up actions. Maintenance teams require no training and can now check for gas and vacuum leaks even during periods of peak production. The 7-inch LCD touchscreen projects a SoundMap over a visual image for quick identification of leak location and reporting of findings. The algorithms and analysis software on the device in LeakQ mode provide an estimate of the size and cost of a leak. Standard 3-year premium care. ds: dsc: Scope of delivery ii905 Acoustic Imager USB-C charger with country-specific connectors Rugged lithium-ion battery set USB-C cable Robust carrying case Adjustable carrying and neck strap Sensor array protection kts: Acoustic Imager in case (with 3 years Premium Care) kpn: ii905/FPC3 kpn_dash: kpn_clear: ii905FPC3 bkpn: FLUKE ii905/FPC3 bkpn_clear: FLUKE ii905FPC3 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6018211 sr_ns: FLUKE6018211
r: 08121745 p: 21945.276 pid: 166039 b: FLUKE q: 0 st: lt: 8 ean: 0195112123133 sr: FLUKE 5594661 sr_no_br: 5594661 sr_no_br_cl: 5594661 sr_cl: FLUKE5594661 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii915 Acoustic Imager in case - 5594661 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Enhanced performance: Improved detection performance for gas leaks, electrical discharges and mechanical problems. LeakQ mode: Estimated leak size and cost estimation. PDQ mode: Assesses the severity of the discharge. MecQ mode: Proactively addresses potential problems in rotating mechanical components. Reporting features: Integrated functionality for visual and textual tagging and annotation for streamlined reporting. Wireless upload: Easy transfer of data to Fluke Connect. The Fluke ii915 Acoustic Imager with LeakQ, PDQ Mode and MecQ Mode helps maintenance teams detect, locate and assess gas leaks, partial discharges and potential mechanical anomalies. The multi-award-winning industrial imaging (II) series is user-friendly and has an intuitive interface that promotes acceptance by the entire maintenance team. Maintenance teams can stay ahead of potential problems by efficiently scanning large areas of interest, allowing maintenance teams to take proactive steps and optimise system performance. ds: dsc: Scope of delivery ii915 Acoustic Imager USB-C charger with country-specific connectors. Robust lithium-ion battery set USB-C cable Robust carrying case Adjustable carrying and neck strap Sensor array protection kts: Acoustic Imager in case kpn: ii915 kpn_dash: kpn_clear: ii915 bkpn: FLUKE ii915 bkpn_clear: FLUKE ii915 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 5594661 sr_ns: FLUKE5594661
r: 08121799 p: 21788.652 pid: 166322 b: FLUKE q: 0 st: lt: 8 ean: 0195112030264 sr: FLUKE 5293767 sr_no_br: 5293767 sr_no_br_cl: 5293767 sr_cl: FLUKE5293767 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE RSE600/C 9Hz thermal imaging camera 640x480 with mounting system - 5293767 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description Software compatibility with MATLAB and LabVIEW allows users to integrate infrared data, images and video to support R&D analysis;. 640 x 480 resolution See the details you need with optional smart lenses: 2x and 4x telephoto, wide-angle and macro lenses. Optimise images, generate customisable reports and export images in the format of your choice with SmartView desktop software Wirelessly connect your camera to the Fluke Connect system to easily share and edit images ds: dsc: Scope of delivery Infrared camera with standard infrared lens (640 x 480 image resolution) Power supply Ethernet cable Lens cap Carrying case kts: thermal imaging camera 640x480 with mounting system kpn: RSE600/C 9Hz kpn_dash: kpn_clear: RSE600C9Hz bkpn: FLUKE RSE600/C 9Hz bkpn_clear: FLUKE RSE600C9Hz c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5293767 sr_ns: FLUKE5293767
r: 08107151 p: 21358.953 pid: 158709 b: FLUKE q: 0 st: lt: 8 ean: 0195112124963 sr: FLUKE 5602257 sr_no_br: 5602257 sr_no_br_cl: 5602257 sr_cl: FLUKE5602257 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-TI-9HZ-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + TiS75 thermal imaging camera in case - 5602257 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description This tool kit, which includes the PVA-1500HE2 I-V curvetracer and TiS75+ thermal imaging camera, is designed to streamline the inspection process and ensure optimal performance of solar panels. The PVA-1500HE2 offers a range of advanced features, including the ability to process large amounts of I-V curvetracer measurement data. This provides fast and detailed performance data. The intuitive user interface allows easy navigation and real-time analysis, so that potential problems can be identified immediately. In addition, the TiS75+ thermal imaging camera provides accurate thermal imaging technology to detect anomalies such as hotspots and faulty connections. This tool kit enables solar professionals to maximise the efficiency and reliability of solar installations, from commissioning and troubleshooting to routine inspections and performance optimisation. Using a thermal imaging camera such as the Fluke TiS75+ at a PV site with solar panels can help improve system performance, reduce maintenance costs and extend the life of solar panels and associated components. Thermal inspections with the Ti75+ can help to: find hotspots on solar panels that indicate damage or underperformance identify electrical problems such as loose or corroded connections prevent critical problems and extend system lifetime ensuring correct installation and safe operation monitor system performance and detect degradation or abnormalities assess shade problems that may affect energy production Key features PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Automates data management, analysis and reporting TiS75+ key features 384 x 288 infrared resolution Asset tagging IR Fusion touch screen IS3 and AVI video recording Measures up to 550 °C Dew point calculation ds: dsc: Scope of delivery PVA-1500HE2: PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnect device Chargers 2x thermocouples and self-adhesive discs Cleaning agent for sensor Transport case (included with the PVA-1500HE2) Available for free download: PVA application and data analysis tool TiS75+: Thermal imaging camera Mains adapter (including universal mains adapters) Smart battery charger with two compartments Two robust smart lithium-ion batteries USB cable 4 GB micro SD card Rugged carrying case with soft carrying case and adjustable hand strap Available for free download: Fluke Connect software kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + TiS75 thermal imaging camera in case kpn: SOL-TI-9HZ-KIT kpn_dash: SOL kpn_clear: SOLTI9HZKIT bkpn: FLUKE SOL-TI-9HZ-KIT bkpn_clear: FLUKE SOLTI9HZKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602257 sr_ns: FLUKE5602257
r: 08121743 p: 18969.697 pid: 166041 b: FLUKE q: 0 st: lt: 8 ean: 0195112129227 sr: FLUKE 6017827 sr_no_br: 6017827 sr_no_br_cl: 6017827 sr_cl: FLUKE6017827 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii905/FPC Acoustic Imager in case (with 1 year Premium Care) - 6017827 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Easy, fast and safe visual detection of gas leaks with LeakQ mode, including estimated leak size and cost. The 7-inch LCD touchscreen projects a SoundMap over visual images for quick identification of leak location. Integrated visual and textual tagging and annotation features provide key details to optimise reporting and follow-up actions. Wirelessly upload to Fluke Connect on the go The Fluke ii905 Acoustic Imager with LeakQ helps maintenance teams detect, locate and assess gas and vacuum leaks. The algorithms and analysis software on the device in LeakQ mode estimate the size and cost of a leak. Integrated visual and textual tagging and annotation features provide key details to optimise reporting and follow-up actions. Maintenance teams require no training and can now check for gas and vacuum leaks even during periods of peak production. The 7-inch LCD touchscreen projects a SoundMap over a visual image for quick identification of leak location and reporting of findings. The algorithms and analysis software on the device in LeakQ mode provide an estimate of the size and cost of a leak. ds: dsc: Scope of delivery ii905 Acoustic Imager USB-C charger with country-specific connectors Rugged lithium-ion battery set USB-C cable Robust carrying case Adjustable carrying and neck strap Sensor array protection kts: Acoustic Imager in case (with 1 year Premium Care) kpn: ii905/FPC kpn_dash: kpn_clear: ii905FPC bkpn: FLUKE ii905/FPC bkpn_clear: FLUKE ii905FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6017827 sr_ns: FLUKE6017827
r: 02910221 p: 18423.152 pid: 72534 b: FLUKE q: 0 st: lt: 36 ean: 0095969835169 sr: FLUKE 4841945 sr_no_br: 4841945 sr_no_br_cl: 4841945 sr_cl: FLUKE4841945 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FLK-TiX580 9 Hz Infrared camera in robust carrying case - 4841945 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Key features: The 5.7-inch screen offers 150% more viewing area than a standard 3.5-inch screen The screen can rotate 240 degrees, offering unrivalled flexibility Ergonomic design and neck strap make long inspection days much easier LaserSharp Auto Focus calculates the distance to your target object extremely accurately (up to 30 metres) MultiSharp Focus automatically delivers focused images across the entire field of view, drastically reducing the risk of misdiagnosis IR Fusion technology lets you easily adjust the combination of visible and infrared images Fluke Connect connects your camera to the Fluke network of wireless test and measurement tools Get 4x more pixels with SuperResolution, a technology that captures multiple images and combines them into a single 1280 x 960 pixel image Reduce the need to take notes on site with two useful features: IR-PhotoNotes annotation system - captures digital images of the environment against reference conditions or the actual location Any additional data can also be stored on file with recorded text Quickly mark areas outside your preset 'normal' temperature ranges with colour alarms Compatibility with MATLAB and LabVIEW allows users to integrate camera data, infrared video and images to support R&D analysis. Newly added Fluke Connect SmartView desktop software: Optimise thermal images, perform analysis, quickly generate customisable and robust reports and export images to the cloud format of your choice Pre-calibrated optional lenses: Wide-angle lens, 2x and 4x telephoto lenses and 25-micron macro lenses allow you to take close-up or remote shots Product description: Bring the best to your workplace: the TiX580 is a solid and superbly designed 640 x 480 thermal imaging camera. Users can now perform thermal imaging inspections with greater reliability and faster results than ever before, with the power and ease of use you've come to expect from Fluke. See sharper and clearer images for more precise interpretation. The 240-degree rotatable screen makes it easy to take images of equipment in awkward or hard-to-reach places. The ergonomic design and neck strap make long inspection days much easier. Outdoors, you can adjust the swivel screen to minimise glare, and the 5.7 large LCD touchscreen provides an optimal viewing experience on location; a good example of 'made for use'. Powerful, new, easy-to-use Fluke Connect SmartView deckstop software available for free download. Fluke Connect SmartView desktop software is a comprehensive and connected software platform that represents the future of integrated equipment maintenance, monitoring, analysis and reporting. It is easier than ever to optimise thermal images, perform analysis, quickly generate customisable and robust reports and export images to the cloud format of your choice. You can integrate with Fluke Connect: the world's largest integrated system of software and maintenance tools. ds: dsc: Scope of delivery Fluke TiX580 Infrared Camera 9 Hz (thermal imaging camera with standard infrared lens) Mains adapter and battery charger (includes universal mains adapters) Two robust lithium-ion battery packs USB cable HDMI video cable Robust carrying case Adjustable neck and carrying strap Free download: Fluke Connect SmartView desktop software and user manual kts: Infrared camera in robust carrying case kpn: FLK-TiX580 9 Hz kpn_dash: FLK kpn_clear: FLKTiX5809Hz bkpn: FLUKE FLK-TiX580 9 Hz bkpn_clear: FLUKE FLKTiX5809Hz c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 4841945 sr_ns: FLUKE4841945
r: 08107150 p: 17573.829 pid: 158665 b: FLUKE q: 0 st: lt: 8 ean: 0195112124987 sr: FLUKE 5602278 sr_no_br: 5602278 sr_no_br_cl: 5602278 sr_cl: FLUKE5602278 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-INS87-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + current clamp + insulation and multimeter in case - 5602278 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Sweep-to-sweep delay of 9 seconds to measure 3.5 MW within 1 hour Uninterrupted measurements even in hot environments Automates data management, analysis and reporting Database of more than 70,000 modules with automatic updates Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Ready for on-site firmware update Product description 393 FC Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and rated to IP54 for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity Product description 87V A unique feature for accurate voltage and frequency measurements at variable speed drives and other equipment causing electrical disturbances (87V). A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (87V). Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. With its large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Product description 1587 FC PI/DAR measurements with TrendIt graphs Memory storage via the Fluke Connect Measurements app Temperature compensation via the Fluke Connect Measurements app Low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V Insulation test: 0.01 MOhm to 2.0 GOhm Automatic discharge of capacitive voltages Smoothed reading of insulation test values Frequency Capacitance Diode test Temperature Min/Max AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Passage Three-year warranty External probe, test leads, alligator clips Thermocouple type K Automatic switch-off ds: dsc: Scope of delivery PVA-1500HE2 PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnector Chargers 2x thermocouples and self-adhesive discs Cleaning agent for sensor Transport case (included with the PVA-1500HE2) Available for free download: PVA application and data analysis tool 393 FC 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, angled plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap Premium carrying case 87V 87V industrial multimeter TL75 measuring leads (TL175 Eur) AC 175 crocodile clips Holster with tilt pocket for test leads 80BK temperature measuring probe 9 V battery (installed) 1587 FC 1587 FC insulation multimeter Remote probe Measurement leads Crocodile clips Thermocouple type K Soft case kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + current clamp + insulation and multimeter in case kpn: SOL-INS87-KIT kpn_dash: SOL kpn_clear: SOLINS87KIT bkpn: FLUKE SOL-INS87-KIT bkpn_clear: FLUKE SOLINS87KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602278 sr_ns: FLUKE5602278
r: 08107149 p: 17474.656 pid: 158708 b: FLUKE q: 0 st: lt: 8 ean: 0195112124994 sr: FLUKE 5602284 sr_no_br: 5602284 sr_no_br_cl: 5602284 sr_cl: FLUKE5602284 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-INS37-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + 1537 insulation resistance tester in case - 5602284 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description Combining the precision of the PVA-1500HE2 I-V curvetracer with the advanced capabilities of the Fluke 1537 insulation tester, this tool kit provides comprehensive solar panel diagnostics. The PVA-1500HE2 offers a range of advanced features, including the ability to process large amounts of I-V curvetracer measurement data. This provides fast and detailed performance data. The intuitive user interface allows easy navigation and real-time analysis, so that potential problems can be identified immediately. In addition, the 1537 insulation tester offers insulation resistance tests up to 2500 V, helping to detect potential safety hazards and prevent system failures. Together, these tools enable solar professionals to confidently ensure the efficiency, reliability and safety of solar installations, from commissioning and routine maintenance to troubleshooting and performance optimisation. The 1537 insulation tester is an ideal electrical test solution that ensures the safety, reliability and performance of solar systems with its 2500 V capabilities. Insulation resistance testing with the 1537 is crucial for: checking the integrity of cables and components checking the insulation of wiring to prevent possible faults such as short circuits during installation detecting wear and tear detecting faults or insulation problems ensuring the system meets safety standards during compliance tests capture test results for compliance audits and performance analysis Key features PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Automates data management, analysis and reporting Check cable integrity with 2500 V insulation resistance tests Key features 1537 insulation resistance tester Selectable voltage tests: customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar power applications. Comprehensive insulation resistance measurement: Achieve insulation resistance measurement up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. Comprehensive measurements: The Fluke 1537 expands your testing capabilities with AC/DC voltage and resistance measurements. Stable resistance measurements: Faster and more stable insulation resistance measurements with up to 5 mA short-circuit current. Fine-tunable test voltage: Adjust the test voltage from 250 V to 2500 V in 100 V steps to meet specific test requirements. Dielectric discharge rate calculation: Automatically calculate the dielectric discharge rate (DD, Discharge Rate) to help identify problems with inaccessible insulation. Slope test mode: Linearly increase the applied test voltage by 100 V/s to identify potentially hard-to-identify faults. Visual and audible continuity indicator: Check continuity visually on the screen or with the audible indicator, so you can concentrate on your test procedure without looking at the display. Customisable test parameters: Set user-defined labels, adjust test duration and save measurement results for a customised testing experience. Effortless data management: Download and manage data effortlessly with the included PC software. Extended warranty: Enjoy peace of mind with an extended 3-year warranty. ds: dsc: Scope of delivery PVA-1500HE2: PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnect device Chargers 2x thermocouples and self-adhesive discs Cleaning agents for sensor Transport case Available for free download: PVA application and data analysis tool 1537: Insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case USB cable PC software (downloadable from Fluke website) kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + 1537 insulation resistance tester in case kpn: SOL-INS37-KIT kpn_dash: SOL kpn_clear: SOLINS37KIT bkpn: FLUKE SOL-INS37-KIT bkpn_clear: FLUKE SOLINS37KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602284 sr_ns: FLUKE5602284
