r: 02125466 p: 607.165 pid: 72409 b: FLUKE q: 2 st: 1 lt: 1 ean: 0095969586719 sr: FLUKE 3947835 sr_no_br: 3947835 sr_no_br_cl: 3947835 sr_cl: FLUKE3947835 sr_dash: sold: 1214.33 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 77 IV digital multimeter 1000V - 3947835 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 77-IV digital multimeter has the features you need to solve most electrical and electronic problems. Easy to use, this meter is significantly improved over Fluke's original 70 series. For example, this meter has more measurement functions, meets the latest safety standards, and has a much larger display that is easier to read. Measuring functions Measuring range up to 1000 V Average value method AC measurements 0.3% accuracy 10 amps continuously (20 A for 30 seconds) Frequency and capacitance measurement Resistance and continuity test Key features Large display Backlight for poorly lit areas Min/Max recording of signal fluctuations Ergonomic overmolded housing with integrated probe holders Keep your hands free with the optionally available magnetic TPAK suspension kit Automatic and manual range adjustment Meets the safety standards of measurement category CAT III 1000 V and CAT IV 600 V The 77-IV replaces the 77. Step up to superior functionality and safety today. ds: dsc: Scope of delivery 9V battery (installed) Test leads User manual kts: digital multimeter 1000V kpn: 77 IV kpn_dash: kpn_clear: 77IV bkpn: FLUKE 77 IV bkpn_clear: FLUKE 77IV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947835 sr_ns: FLUKE3947835
r: 02954020 p: 1160.289 pid: 73521 b: FLUKE q: 0 st: lt: 8 ean: 0095969401203 sr: FLUKE 2840265 sr_no_br: 2840265 sr_no_br_cl: 2840265 sr_cl: FLUKE2840265 sr_dash: sold: 1160.289 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test No Max. current AC/DC 2000 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. frequency 1 kHz n: FLUKE 355 True RMS 2000 A current clamps - 2840265 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Key features: Reliably perform many high-current measurement applications with 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC. Large jaw span of 58 mm (2.3 in) is suitable for large or multiple conductors Safety specification according to CAT IV 600 V, CAT III 1000 V for additional user protection Inrush current measurement records inrush currents with high accuracy and reproducibility High voltage measurements of 1000 V AC + DC true-rms, 600 V AC and 1000 V DC allow the user to perform multiple tests with only one instrument (only for the 355) A resistance to 400 kOhm combined with a call-through test function offers the convenience of a multimeter in a current clamp. (only for the 355) Accurately measure frequencies up to 1 kHz for optimal troubleshooting Quickly analyse measured values with MIN, MAX and AVG functions Large backlit display ensures easy readability even in poor lighting conditions Use the display hold function to record measured values even when it is not possible to look directly at the display Use the low-pass filter to smooth out loads with high noise and stabilise readings Product description: Versatile and robust instrument for high-current applications Make reliable measurements with complete confidence with the Fluke 355 and 353 true-rms digital current clamps, the preferred instruments for current clamp measurements of high current levels up to 2000 A. The extra-wide jaws are easy to apply around large conductors, such as those commonly found in installations with high current levels. The particularly robust design of these instruments and their approval to safety specifications CAT IV 600 V and CAT III 1000 V provide extra protection when measuring high current levels. Accurate peak measurements can be made with the inrush current function - ideal for electric motors and inductive loads. The 355 also measures voltage and resistance, making it the ideal current clamp for utilities, electrical installers and industrial maintenance engineers. ds: dsc: Scope of delivery current clamp 355 carrying case C43 6 AA batteries silicone rubber measuring leads TL224, 1.5 m long measuring probes TP2 crocodile clips AC285 user manual 3-year warranty kts: True RMS 2000 A current clamps kpn: 355 kpn_dash: kpn_clear: 355 bkpn: FLUKE 355 bkpn_clear: FLUKE 355 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2840265 sr_ns: FLUKE2840265
r: 02948258 p: 1125.294 pid: 71936 b: FLUKE q: 0 st: lt: 10 ean: 0095969803113 sr: FLUKE 4709934 sr_no_br: 4709934 sr_no_br_cl: 4709934 sr_cl: FLUKE4709934 sr_dash: sold: 1125.294 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 369 FC True RMS wireless leakage current clamp with 61 mm jaw opening - 4709934 cn: CLAMP METER cn2: CLAMP METER cn_clear: CLAMPMETER d: Product description: Reduce downtime: detect leakage current without turning equipment off The Fluke 369 FC True RMS leakage current clamp helps users measure, document, record and compare leakage current readings over time. This is to prevent unplanned downtime and identify intermittent tripping by RCDs. Without the need to switch off equipment. The Fluke 369 FC has a very large jaw opening of 61 mm for work with extra-large conductors. The jaws of the pliers are fully shielded to accurately record very small leakage currents and minimise external electromagnetic interference. The 369 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect ? the industry's largest system of software and (over 40) wireless test and measurement tools ? the 369 FC allows you to track changes in leakage current over time. This allows you to identify potential problems before they become serious failures Key features True RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms Jaw opening of 61 mm Highest resolution of 1 ?A, measurements up to 60 A Selectable filter function that eliminates unwanted noise Max/Min/Average readings and Hold function (freeze display) Front-facing LED work light for use in dark cable cabinets Backlit display; automatic backlight and automatic display shutdown for extended battery life Safety specification CAT III 600 V Logging in internal memory: up to 65,000 measurement points ds: dsc: Scope of delivery Fluke 369 FC True RMS leakage current clamp Carrying case Safety manual Batteries: 2 AA kts: True RMS wireless leakage current clamp with 61 mm jaw opening kpn: 369 FC kpn_dash: kpn_clear: 369FC bkpn: FLUKE 369 FC bkpn_clear: FLUKE 369FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Clamp meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke clamp meter sr_no_br_cl_ns: 4709934 sr_ns: FLUKE4709934
r: 03330050 p: 1075.489 pid: 32443 b: FLUKE q: 0 st: lt: 10 ean: 0095969611084 sr: FLUKE 4097561 sr_no_br: 4097561 sr_no_br_cl: 4097561 sr_cl: FLUKE4097561 sr_dash: sold: 1075.489 p_range: none type: standard act: 1 avo: 1 av: Min. pressure -0,83 bar Max. pressure 20 bar Connection size 1/4" Connection type External thread Thread type BSPP Version Bottom connection n: FLUKE 700G07 precision pressure test gauge 500 PSIG - 4097561 cn: PRESSURE GAUGE cn2: PRESSURE GAUGE cn_clear: PRESSUREGAUGE d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 500 PSIG kpn: 700G07 kpn_dash: kpn_clear: 700G07 bkpn: FLUKE 700G07 bkpn_clear: FLUKE 700G07 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure gauge | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure gauge sr_no_br_cl_ns: 4097561 sr_ns: FLUKE4097561
r: 08106945 p: 1042.1 pid: 74198 b: FLUKE q: 0 st: lt: 8 ean: 0095969674133 sr: FLUKE 4353550 sr_no_br: 4353550 sr_no_br_cl: 4353550 sr_cl: FLUKE4353550 sr_dash: sold: 1042.1 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700GA5 precision pressure test gauge 30 PSIA - 4353550 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 30 PSIA kpn: 700GA5 kpn_dash: kpn_clear: 700GA5 bkpn: FLUKE 700GA5 bkpn_clear: FLUKE 700GA5 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353550 sr_ns: FLUKE4353550
r: 03180587 p: 936.988 pid: 71654 b: FLUKE q: 0 st: lt: 10 ean: 0195112002186 sr: FLUKE 5225761 sr_no_br: 5225761 sr_no_br_cl: 5225761 sr_cl: FLUKE5225761 sr_dash: sold: 936.988 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 378 True-RMS wireless AC/DC current clamp with iFlex - 5225761 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description FieldSense technology: simultaneously measures AC voltage and AC current without physical contact with the conductor. Power quality indicator: The meter automatically detects power quality problems. When measuring via FieldSense, the 378 indicates whether there is poor power factor (Power Factor), THD (total harmonic distortion) or problems in the source or load. 3-phase voltage and current tests: Calculate the full set of phase-to-phase values in three easy steps. iFlex flexible current clamp: Includes flexible current clamp for measurements up to 2500 A in very tight spaces. Visual display: The display turns green when a stable measurement is achieved and turns orange when the Power Quality indicator detects a problem. Safety: Certified for CAT IV 600 V and CAT III 1000 V. ds: dsc: Scope of delivery 378 True-RMS non-contact current clamp i2500-18 iFlex flexible current clamp (48 cm) TL224 silicone test leads TP175 TwistGuard test probes AC285 black earth clamp (alligator clip) TPAK ToolPak magnetic suspension kit Carrying case Manual kts: True-RMS wireless AC/DC current clamp with iFlex kpn: 378 kpn_dash: kpn_clear: 378 bkpn: FLUKE 378 bkpn_clear: FLUKE 378 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5225761 sr_ns: FLUKE5225761
r: 08107120 p: 935.442 pid: 72930 b: FLUKE q: 0 st: lt: 10 ean: 0095969493901 sr: FLUKE 3449156 sr_no_br: 3449156 sr_no_br_cl: 3449156 sr_cl: FLUKE3449156 sr_dash: sold: 935.442 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289 IMSK service kit industrial multimeter - 3449156 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS accuracy with manual and automatic range setting, display hold, auto hold and min/max recording provide the results you need. The Fluke-i400 AC 400A current clamp turns the 289 into a current meter. The meter's safety specification CAT III 1000 V, CAT IV 600 V ensures that you can do your job safely. This combination set is based on the Fluke 289, the high-performance industrial multimeter with data logging function, combined with the i400 AC current clamp. Together, the parts help solve complex problems in electronics, plant automation, power distribution and electromechanical equipment. The set includes special accessories that allow you to be even more productive and brings savings of more than 15% compared to the individual prices of all accessories. Plus, you'll be working with the most trusted tools in the world. Features Fluke 289 DMM Can log data and display graphical results. TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Graphically monitor up to 10,000 logged events and values captured in the log with built-in TrendCapture Zoom in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. Low-pass filter for accurate simultaneous voltage and frequency measurements on frequency-controlled drives and other devices that cause electrical disturbances. Includes premium measurement lead, crocodile clips and amplifier connectors. Functions and features Fluke i400 AC current clamp Provides accurate current measurements up to 400 A AC without interrupting electrical circuits. Flexible, heat-resistant test leads and alligator clips complete this high-quality set. Soft, coated handle with non-slip surface prevents accidental touching of live wires Max. conductor diameter Ø 32 mm 1000 V voltage detection range for wide range of applications Measures up to 1000 V AC/DC Measure up to 10 A AC/DC Measure resistance up to 500 MOhm Measure frequency up to 1000 kHz Safety features CAT III 1000 V for extra protection CAT IV 600 V for extra protection Approved according to CE and CSA ds: dsc: Scope of delivery Fluke 289 True-RMS multimeter with data logging function Fluke I400, 400A AC current clamp TL71 Flexible silicone test lead set AC175 Alligator clip set with screw thread kts: service kit industrial multimeter kpn: 289 IMSK kpn_dash: kpn_clear: 289IMSK bkpn: FLUKE 289 IMSK bkpn_clear: FLUKE 289IMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3449156 sr_ns: FLUKE3449156
r: 03395578 p: 152.289 pid: 179754 b: FLUKE q: 0 st: lt: 8 ean: 0095969620215 sr: FLUKE 5065907 sr_no_br: 5065907 sr_no_br_cl: 5065907 sr_cl: FLUKE5065907 sr_dash: sold: 913.734 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 650 °C Optical ratio 12:1 Power supply 1 x AA Accuracy ± 1 °C n: FLUKE 62 MAX+ infrared thermometer with 2 laser points - 5065907 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Instantly measures the temperature of equipment in hard-to-reach or hazardous areas Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Robust: tested to withstand a 3-metre drop Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Key features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when readings fall outside the limits. Powered by a single standard AA battery. ds: dsc: kts: infrared thermometer with 2 laser points kpn: 62 MAX+ kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX+ bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 5065907 sr_ns: FLUKE5065907
r: 37990118 p: 896.038 pid: 72224 b: FLUKE q: 0 st: lt: 11 ean: 0095969349697 sr: FLUKE 2646347 sr_no_br: 2646347 sr_no_br_cl: 2646347 sr_cl: FLUKE2646347 sr_dash: sold: 896.038 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 771 mA process current clamp - 2646347 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of the range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values ds: dsc: Scope of delivery Carrying case User manual kts: mA process current clamp kpn: 771 kpn_dash: kpn_clear: 771 bkpn: FLUKE 771 bkpn_clear: FLUKE 771 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 2646347 sr_ns: FLUKE2646347
r: 03252447 p: 847.679 pid: 73073 b: FLUKE q: 0 st: lt: 8 ean: 0195112041239 sr: FLUKE 5337412 sr_no_br: 5337412 sr_no_br_cl: 5337412 sr_cl: FLUKE5337412 sr_dash: sold: 847.679 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Max. electrical capacity 10000 µF Measurement of electrical capacity Yes Max. frequency 200 kHz Max. resistance 50 MOhm Measurement voltage Yes Current measurement Yes Measurement resistance Yes Measurement frequency Yes n: FLUKE 87VMAX-PVLEAD1 solar multimeter set with Pomona test leads - 5337412 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Withstands falls of up to 4 metres (13 feet) with an industrial housing and holster Waterproof, dustproof IP67 housing for the most extreme work sites Premium TL175 TwistGuard measurement leads Double 87V battery life (up to 800 hours); backlit keys for dark environments True RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Frequency up to 200 kHz A built-in thermometer makes it easy to take temperature measurements without the need to carry a separate instrument Min/Max/Gem. recording, plus 250 µs peak min/max interval to capture variations automatically Unique function for accurate voltage and frequency measurements on frequency controlled drives (VFDs) and other devices that generate electrical noise Large display figures, two-level bright white backlight and backlit keys for improved visibility High-resolution display mode of 19,999 counts ds: dsc: Scope of delivery TL175 TwistGuard® measuring leads AC175 Crocodile clips 80BK-A thermocouple Yellow snap-on holster with storage compartment for test leads Three AA batteries (installed) Pomona PVLEAD1 MC4 to 4 mm test lead kit kts: solar multimeter set with Pomona test leads kpn: 87VMAX-PVLEAD1 kpn_dash: 87VMAX kpn_clear: 87VMAXPVLEAD1 bkpn: FLUKE 87VMAX-PVLEAD1 bkpn_clear: FLUKE 87VMAXPVLEAD1 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5337412 sr_ns: FLUKE5337412
r: 08107213 p: 416.859 pid: 73564 b: FLUKE q: 0 st: lt: 8 ean: 0095969983440 sr: FLUKE 5218288 sr_no_br: 5218288 sr_no_br_cl: 5218288 sr_cl: FLUKE5218288 sr_dash: sold: 833.718 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE IRR1-SOL solar radiation meter in carrying case (4x AA batteries) - 5218288 cn: SOLAR ENERGY METER cn2: SOLAR ENERGY METER cn_clear: SOLARENERGYMETER d: Product description Measure solar radiation, ambient and PV module temperature, panel orientation and tilt angles Take direct measurements to determine the number of watts per square metre of solar radiation, as required by standard IEC 62446-1 High-contrast LCD display with large digits for easy readability in direct sunlight Includes handy carrying case with shoulder strap If you monitor, install, maintain or check the performance of solar panels or a photovoltaic system, the Fluke IRR1-SOL Radiation Meter gives you the 4 critical measurements you need in one easy-to-use instrument. Take direct measurements to determine the number of watts per square metre of solar radiation, as required by standard IEC 62446-1. Measure temperature by placing the meter directly on the panel or by connecting the external probe. Find the wind direction with the compass and check the tilt angle of a roof or panel with the tilt function. Obtain all the essential photovoltaic measurements needed to install, monitor and report on the performance of a photovoltaic system in one instrument. ds: dsc: Scope of delivery Solar radiation meter External temperature probe with suction cup Carrying case with shoulder strap 4x AA batteries kts: solar radiation meter in carrying case (4x AA batteries) kpn: IRR1-SOL kpn_dash: IRR1 kpn_clear: IRR1SOL bkpn: FLUKE IRR1-SOL bkpn_clear: FLUKE IRR1SOL c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Solar energy meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke solar energy meter sr_no_br_cl_ns: 5218288 sr_ns: FLUKE5218288
r: 02954082 p: 400.117 pid: 72142 b: FLUKE q: 0 st: lt: 10 ean: 0095969799683 sr: FLUKE 4699340 sr_no_br: 4699340 sr_no_br_cl: 4699340 sr_cl: FLUKE4699340 sr_dash: sold: 800.234 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 0,4 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 3000FC/TPAK wireless multimeter kit with ToolPAK magnetic hanging clip - 4699340 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Key features: The Fluke 3000 FC has features and functions you need to examine your equipment and installation for faults. True-RMS AC voltage and current for accurate measurements on non-linear loads Large-digit display with analogue bargraph Backlit display for working in dark places Capacity Records minimum and maximum values to support troubleshooting Keep your hands free with the magnetic hanging clip included in this combination kit 3-year warranty Plus, Fluke Connect wireless-compatible modules measure AC, DC and AC+DC voltage, AC and DC current and temperature, all of which are displayed on Fluke's 3000 FC series wireless multimeter. Choose a standard current clamp or a flexible current clamp to measure AC current. Mix and match modules to meet your unique measurement needs. Read the primary measurement value on the main display, and data from up to three modules at the same time. Modules are available individually, or as part of Fluke Connect kits Product description: Compatible with Fluke Connect Mobile App Fluke's 3000 FC Series wireless multimeter ensures that instruments and not your body are near live electrical dividers. Increase safety and efficiency with this tester. All the facts, right on site. The Fluke 3000 FC True-RMS wireless multimeter with the Fluke Connect app and ShareLive video call function. Accuracy, reliability and ease of use make the Fluke 3000 FC wireless multimeter the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to investigate and troubleshoot many problems in electrical and electronic systems. The Fluke 3000 FC offers you True-RMS voltage and current measurement functions, 6000-count resolution and manual and automatic range setting. It can also perform frequency, capacitance and resistance measurements as well as dial-through and diode tests. In addition, the Fluke 3000 FC offers a higher base accuracy of 0.09%, a digital display showing up to three secondary remote module readings and a bright white backlight. Work safely near electrical dividers with less protective equipment The Fluke 3000 FC True-RMS wireless multimeter and the Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then, at a safe distance, read the results on the 3000 FC wireless multimeter. You can display the meter's readings plus the readings of up to 3 wireless modules, while reducing the risk of arc discharge by staying away from hazardous measurement situations. Even better, the Fluke 3000 FC Series wireless multimeter can send readings to your smartphone, allowing you to store readings on it and share them with your team on-site, anytime, anywhere. Troubleshoot connected events Timing is everything when you are trying to find the cause of a complex problem. You often need to measure in one place while looking at activity in another part of the system. We've solved that problem with Fluke Connect - connect your remote modules to a particular location and then measure with the Fluke 3000 FC multimeter up to 20 metres away from that location. You can see the interaction between your remote measurement points on a single screen, in real-time. You can even download the data to a PC for further analysis. Other features Add your laptop and go from logging immediately to analysis and diagnosis. Log data over an extended period of time with the Fluke Connect wireless modules and monitor changes in circuit loads for an hour, a shift or a week. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. Save time, effort and energy with the Fluke 3000FC True-RMS digital multimeter with a set of industrial test leads and a non-contact voltage locator, all in a compact, durable carrying case. ds: dsc: Scope of delivery Fluke 3000 FC True-RMS digital multimeter with backlight Fluke TL75 test leads Fluke C35 lightweight carrying case ToolPak magnetic hanging clip Installed batteries User's manual on CD kts: wireless multimeter kit with ToolPAK magnetic hanging clip kpn: 3000FC/TPAK kpn_dash: kpn_clear: 3000FCTPAK bkpn: FLUKE 3000FC/TPAK bkpn_clear: FLUKE 3000FCTPAK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4699340 sr_ns: FLUKE4699340
r: 02951271 p: 384.247 pid: 71984 b: FLUKE q: 0 st: lt: 6 ean: 0095969659253 sr: FLUKE 4296076 sr_no_br: 4296076 sr_no_br_cl: 4296076 sr_cl: FLUKE4296076 sr_dash: sold: 768.494 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 62MAX+/323/1AC Combination set of current clamp, IR thermometer and VoltAlert voltage detector - 4296076 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Electricians and HVAC technicians solve problems faster with this kit. First check for overheated electrical appliances with an infrared thermometer, then use current clamp and voltage detector to further determine the problem Features 62 MAX+ IR thermometer Small in size. Big in robustness. Dust and water resistant: meets IP54. Rugged: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for even greater comfort in the hand. Distance to measurement point: 12:1. Dual laser: identifies the area to be measured. Large backlit display: makes data easier to read, even in dark environments. Features 323 True-rms current clamp Robust. Reliable. Accurate. 400 A AC current measurement. 600 V AC and DC voltage measurement. True-RMS AC voltage and current measurement for accurate measurements on non-linear signals. Resistance measurement up to 40 k? with call-through test. Slim, ergonomic design. Safety specification CAT IV 300 V/CAT III 600 V. Features 1AC II Voltalert voltage detector Voltbeat technology and continuous self-test, so you always know it is working. When voltage is detected, the tip lights up and beeps. Voltage detection from 90 to 1000 V AC. CAT IV 1000 V for extra safety. ds: dsc: Scope of delivery Fluke 62 MAX+ infrared thermometer Fluke 323 True-RMS current clamp Fluke 1AC II VoltAlert voltage detector C115 carrying case kts: Combination set of current clamp, IR thermometer and VoltAlert voltage detector kpn: 62MAX+/323/1AC kpn_dash: kpn_clear: 62MAX3231AC bkpn: FLUKE 62MAX+/323/1AC bkpn_clear: FLUKE 62MAX3231AC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296076 sr_ns: FLUKE4296076
r: 03151658 p: 750.53 pid: 72297 b: FLUKE q: 0 st: lt: 11 ean: 0095969926287 sr: FLUKE 5140033 sr_no_br: 5140033 sr_no_br_cl: 5140033 sr_cl: FLUKE5140033 sr_dash: sold: 750.53 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Max. electrical capacity 10000 µF Measurement of electrical capacity Yes Max. frequency 200 kHz Max. resistance 50 MOhm Measurement voltage Yes Current measurement Yes Measurement resistance Yes Measurement frequency Yes n: FLUKE 87V MAX True-RMS digital multimeter - 5140033 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Withstands falls of up to 4 metres (13 feet) with an industrial housing and holster Waterproof, dustproof IP67 housing for the most extreme work sites Premium TL175 TwistGuard measurement leads Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments The 87V MAX includes all the familiar features of the most popular DMM in use today, the Fluke 87V, and much more. Withstands a drop of up to 4 metres (13 feet) Fluke's most rugged digital multimeter. The 87V MAX features a rugged industrial housing and a detachable holster. The holster also acts as a holder for a measuring probe for one-handed use. IP67 category Fully waterproof and dust-resistant, for reliable operation in all places where you need to work. Resistant to heat and cold The meter has an extended operating temperature range from -40 °C (for up to 20 minutes) to +55 °C. Other product features True RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Frequency up to 200 kHz A built-in thermometer makes it easy to take temperature measurements without the need to carry a separate instrument Min/Max/Gem. recording, plus 250 µs peak min/max interval to capture variations automatically Unique function for accurate voltage and frequency measurements on frequency controlled drives (VFDs) and other devices that generate electrical noise Large display figures, two-level bright white backlight and backlit keys for improved visibility High-resolution display mode of 19,999 counts Long battery life (800 hours) ds: dsc: Scope of delivery TL175 TwistGuard measuring leads AC175 Crocodile clips 80BK-A thermocouple Detachable holster with storage compartment for test leads Three AA batteries (installed) kts: True-RMS digital multimeter kpn: 87V MAX kpn_dash: kpn_clear: 87VMAX bkpn: FLUKE 87V MAX bkpn_clear: FLUKE 87VMAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5140033 sr_ns: FLUKE5140033
r: 08106896 p: 747.277 pid: 158668 b: FLUKE q: 0 st: lt: 8 ean: 0195112019450 sr: FLUKE 5274939 sr_no_br: 5274939 sr_no_br_cl: 5274939 sr_cl: FLUKE5274939 sr_dash: sold: 747.277 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 393/E True-RMS current clamp CAT III 1500 V with iFlex - 5274939 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 393 CAT III 1500 V True-RMS solar current clamp with iFlex is designed for solar photovoltaic (PV) technicians and maintenance professionals working in high DC voltage environments: PV arrays, wind power, electric railways, battery banks for emergency power supplies in data centres. The current clamp measures up to 1500 V DC and 1000 V AC with test leads and up to 999.9 A DC or AC via the jaw. The included iFlex flexible current clamp offers extended AC current measurements up to 2500 A. The 393 has a thin jaw, allowing you to access cables in crowded combiner cabinets. Moreover, the measuring leads are designed with your work in mind and also comply with safety specification CAT III 1500 V DC. Key features Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and IP54 rated for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity IP54 protection class, ideal for outdoor work on solar panels and wind systems DC power measurement, with readings in kVA Audio polarity indicator helps prevent unintentional faulty wiring Visual continuity tests provide a bright green light on the display, ideal when working in dark and noisy environments When measuring AC current, the included flexible current clamp iFlex gives you unparalleled access to cables in tight spaces. The iFlex probe can be rotated through extremely tight spaces and delivers accurate current measurements. ds: dsc: Scope of delivery 393 CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, right-angle plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap Premium protective bag kts: True-RMS current clamp CAT III 1500 V with iFlex kpn: 393/E kpn_dash: kpn_clear: 393E bkpn: FLUKE 393/E bkpn_clear: FLUKE 393E c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5274939 sr_ns: FLUKE5274939
r: 03395576 p: 141.38 pid: 179420 b: FLUKE q: 0 st: lt: 10 ean: 0095969620208 sr: FLUKE 5065894 sr_no_br: 5065894 sr_no_br_cl: 5065894 sr_cl: FLUKE5065894 sr_dash: sold: 706.9 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 500 °C Optical ratio 10:1 Power supply 1 x AA Accuracy ± 1,5 °C n: FLUKE 62 MAX infrared thermometer with 1 laser dot - 5065894 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Instantly measures the temperature of equipment in hard-to-reach or hazardous areas Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Robust: tested to withstand a 3-metre drop Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Key features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two readings. Alarm: Alarms Hi and Lo for too high and too low values indicate when readings fall outside the limits. Powered by a single standard AA battery. ds: dsc: kts: infrared thermometer with 1 laser dot kpn: 62 MAX kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 5065894 sr_ns: FLUKE5065894
r: 08107209 p: 698.436 pid: 72215 b: FLUKE q: 0 st: lt: 11 ean: 0095969724234 sr: FLUKE 4465665 sr_no_br: 4465665 sr_no_br_cl: 4465665 sr_cl: FLUKE4465665 sr_dash: sold: 698.436 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3001FC KIT FC wireless power kit - 4465665 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description The FC wireless a3001 power kit is suitable for measuring many common electrical parameters Fluke's 3000 FC Series wireless multimeter with the Fluke Connect app has all the necessary functions and features for easy troubleshooting when testing and measuring AC and DC voltage measurements up to 1000 V AC and DC current measurements with 0.01 mA resolution Continuity test, resistance measurement, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54 The a3001 wireless iFlex current module allows measurements to be made on differently sized conductors or in confined spaces and makes wires more accessible Measurement up to 2500 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function The FC wireless a3001 power kit is part of the Fluke Connect team of wireless measuring instruments Connect the a3001 FC wireless AC current module and flexible current clamp to your measurement point and read the results up to 20 metres away on the 3000 FC wireless digital multimeter. You save time with less running back and forth to make multiple measurements. Use the various modules for measurements on three-phase systems, as a standalone measuring instrument, or combine them with other Fluke Connect modules to create a system for making multiple measurements. At short distances, you can even read readings from modules through closed electrical distributors. You also no longer need to record data, as the FC wireless AC power module stores up to 65,000 sets of Min/Max/Avg time-stamped readings when using the optional PC adapter. Fluke Connect wireless measuring instruments also offer greater safety, as you can read read readings from a location other than the measurement point. Now you can take measurements on machines in motion, with only the measurement module potentially at risk. ds: dsc: Scope of delivery Fluke 3000 FC series wireless multimeter Fluke a3001 FC wireless iFlex AC power module TL175 test leads AC175 alligator clips Flexible iFlex current clamp kts: FC wireless power kit kpn: A3001FC KIT kpn_dash: kpn_clear: A3001FCKIT bkpn: FLUKE A3001FC KIT bkpn_clear: FLUKE A3001FCKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4465665 sr_ns: FLUKE4465665
r: 03045039 p: 639.892 pid: 72946 b: FLUKE q: 0 st: lt: 8 ean: 0095969493802 sr: FLUKE 3448783 sr_no_br: 3448783 sr_no_br_cl: 3448783 sr_cl: FLUKE3448783 sr_dash: sold: 639.892 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87V/IMSK service combination set industrial multimeter - 3448783 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product Description Fluke-87V multimeter features True-RMS accuracy and advanced features for desired results The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Includes special accessories such as temperature measuring probe, test leads and crocodile clips This combination set was created based on the Fluke 87V, the world's most widely used industrial digital multimeter, combined with the i400 AC current clamp. Together, they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The set includes special accessories that allow you to be even more productive and brings savings of more than 15% compared to the individual prices of all accessories. Plus, you'll be working with the most trusted tools in the world. The Fluke-87V multimeter features True-RMS accuracy and advanced features for the results you want True-RMS accuracy with manual and automatic range setting, display hold, auto hold and min/max recording Efficiently troubleshoot motor drives, factory automation, power distribution and electromechanical equipment, even in high noise, high current and altitude locations. A low-pass filter supports accurate frequency measurements on VFDs and records ultra-short interruptions of up to 250 µs. Lifetime warranty by a brand you trust. The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Current clamp provides accurate current measurements up to 400A AC without interrupting electrical circuits Enables safe measurement according to industry safety standards. Special accessories such as temperature measuring probe, measuring leads and crocodile clips The 80BK-A DMM temperature measuring probe can be connected to the voltage terminals of the 87V, allowing temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F). TL75 measurement leads and AC175 crocodile clips complete this versatile set. Main safety features The meter's safety specification CAT III 1000 V, CAT IV 600 V ensures that you can do your job safely. Resistant to spikes of over 8000 V. Input Alert gives an audible warning if inputs are misused. ds: dsc: Scope of delivery Fluke 87V industrial multimeter Fluke i400 400 A AC current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point measuring lead set AC175 Alligator clip set with screw thread kts: service combination set industrial multimeter kpn: 87V/IMSK kpn_dash: kpn_clear: 87VIMSK bkpn: FLUKE 87V/IMSK bkpn_clear: FLUKE 87VIMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3448783 sr_ns: FLUKE3448783
r: 03388755 p: 119.178 pid: 178052 b: FLUKE q: 0 st: lt: 4 ean: 0095969624213 sr: FLUKE 6101428 sr_no_br: 6101428 sr_no_br_cl: 6101428 sr_cl: FLUKE6101428 sr_dash: sold: 595.89 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 302+ digital current clamp - 6101428 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Compact digital current clamp, flexible and easy to use For everyday applications where True RMS accuracy is not required Small enough to fit in a work bag, robust enough to withstand daily use Measures alternating current up to 400 A Large 30 mm jaw High accuracy of 1.8% Illuminated display Recommended for universal measurements Safety specification CAT II 1000 V, 10 A CAT IV 600 V, CAT III 1000 V only with protective cover Meets safety specification CAT IV 300 V/CAT III 600 V Two-year warranty ds: dsc: Scope of delivery TL75 Hard Point measuring lead set 1.22m with PVC insulation and angled insulated banana plugs kts: digital current clamp kpn: 302+ kpn_dash: kpn_clear: 302 bkpn: FLUKE 302+ bkpn_clear: FLUKE 302 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101428 sr_ns: FLUKE6101428
