r: 03308137 p: 0.115 pid: 176226 b: FISCHER q: 675 st: 1 lt: 1 ean: 4048962480856 sr: FISCHER 568012 sr_no_br: 568012 sr_no_br_cl: 568012 sr_cl: FISCHER568012 sr_dash: sold: 40.25 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 12 mm Application General type (screw head) Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 80 mm Length (Wall plug) 60 mm n: FISCHER 568012 plug SX Plus 12 x 60 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Plug edge prevents slipping deeper into the drill hole Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 25) 100x SX Plus 12x 60 kts: plug SX Plus 12 x 60 kpn: 568012 kpn_dash: kpn_clear: 568012 bkpn: FISCHER 568012 bkpn_clear: FISCHER 568012 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 568012 sr_ns: FISCHER568012
r: 03297801 p: 0.24 pid: 176176 b: FISCHER q: 450 st: 1 lt: 1 ean: sr: FISCHER 535460 sr_no_br: 535460 sr_no_br_cl: 535460 sr_cl: FISCHER535460 sr_dash: sold: 36 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth - mm Length (Wall plug) 40 mm n: FISCHER 535460 DuoPower 8x40 with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 8x 40 50x countersunk screw 5.0x 55 kts: DuoPower 8x40 with screw kpn: 535460 kpn_dash: kpn_clear: 535460 bkpn: FISCHER 535460 bkpn_clear: FISCHER 535460 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535460 sr_ns: FISCHER535460
r: 02794981 p: 0.61 pid: 176005 b: FISCHER q: 0 st: lt: 4 ean: 4048962254075 sr: FISCHER 537258 sr_no_br: 537258 sr_no_br_cl: 537258 sr_cl: FISCHER537258 sr_dash: sold: 30.5 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application Construction board Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 50 mm n: FISCHER 537258 Hollow wall plug DuoTec 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Easy to install nylon toggle for high loads in all panel building materials The unique function and toggle geometry of the fischer DuoTec allows it to handle very heavy loads for a gravity toggle. Where multiple fixings are required, this reduces the number of fixings and maximises security. As a member of the DUO line, the fischer DuoTec comprises two plastic components. The red and hard component of the plug sleeve facilitates the consistent distribution of the load, while the grey and soft component prevents damage to the panel's surface by the fixing, reducing the load. The fischer DuoTec is set like a gravity toggle for applications in panel building materials. The toggle can also be used as an expansion plug in solid building materials. Combination of two material components for more performance Use of chipboard screws, hooks with fastening and screws with metric threads Flush sleeve strengthens the drill hole and allows considerably higher transverse loads Curved handle allows obstacles to be identified before installation Flexible screw mount allows for the use of screws and hooks with different thread shapes Glass fibre-reinforced plastics and a metal skeleton insert (fischer DuoTec 12) allow the toggle to handle heavy tensile and transverse loads in all panel building materials Soft grey nylon contact surface distributes the load over the panel surface, thereby minimising weakening of the supporting building material Standard drill hole diameters and short tilting element for easy installation in narrow cavities, including cavities with insulation White flush sleeve with snap function allows the plug to be pre-installed quickly and securely in the drill hole With scale on the grip strap (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm) Suitable for The fischer DuoTec is designed for pre-positioned installation Simple installation with a standard diameter 10 or 12 mm drill bit The short toggle element makes it suitable for narrow and even with mineral wool insulated cavities. Note the length of the toggle element! Functions like an expansion plug in solid building materials such as concrete or wood. Note, not with metric screws! Flexible screw insert allows for the use of wood, chipboard and metric screws and hooks Building materials Suitable for: Gypsum plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF sheets Steel plates Plastic boards Hollow blocks made from concrete Also functioning in: Solid materials, such as concrete and wood Application Kitchen hanging cabinets Living room cabinets Shelves Wardrobes Handrails Pictures Mirrors Lamps Heavy hanging baskets ds: dsc: kts: Hollow wall plug DuoTec 10 kpn: 537258 kpn_dash: kpn_clear: 537258 bkpn: FISCHER 537258 bkpn_clear: FISCHER 537258 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 537258 sr_ns: FISCHER537258
r: 02824727 p: 0.059 pid: 176011 b: FISCHER q: 0 st: lt: 8 ean: 4048962293258 sr: FISCHER 541894 sr_no_br: 541894 sr_no_br_cl: 541894 sr_cl: FISCHER541894 sr_dash: sold: 29.5 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm n: FISCHER 541894 clamping sleeve FNH 6 x 30 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 6 x 30 kpn: 541894 kpn_dash: kpn_clear: 541894 bkpn: FISCHER 541894 bkpn_clear: FISCHER 541894 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541894 sr_ns: FISCHER541894
r: 08134124 p: 0.68 pid: 176374 b: FISCHER q: 0 st: lt: 8 ean: 4048962254099 sr: FISCHER 537260 sr_no_br: 537260 sr_no_br_cl: 537260 sr_cl: FISCHER537260 sr_dash: sold: 27.2 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 537260 Hollow wall plug DuoTec 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the even distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard, Gypsum fibreboard, Wooden panels (e.g. OSB, chipboard, MDF, etc.), Steel sheet, Plastic sheets, Hollow concrete building block Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 10 kpn: 537260 kpn_dash: kpn_clear: 537260 bkpn: FISCHER 537260 bkpn_clear: FISCHER 537260 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 537260 sr_ns: FISCHER537260
r: 02316685 p: 1.29 pid: 20232 b: FISCHER q: 0 st: lt: 8 ean: 4006209801888 sr: FISCHER 80188 sr_no_br: 80188 sr_no_br_cl: 80188 sr_cl: FISCHER80188 sr_dash: sold: 25.8 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 130 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw No Application Construction board type (screw head) Drilling diameter 16 mm n: FISCHER 80188 KDH 5 tumbler plug cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing with hook and wide transition beams for different board thicknesses. With the fischer toggle fixing KD components such as lights can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long thread. Use with various panel thicknesses and attachment thicknesses No installation tool necessary With hook Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: KDH 5 tumbler plug kpn: 80188 kpn_dash: kpn_clear: 80188 bkpn: FISCHER 80188 bkpn_clear: FISCHER 80188 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 80188 sr_ns: FISCHER80188
r: 03297787 p: 0.79 pid: 176175 b: FISCHER q: 40 st: 1 lt: 1 ean: 4048962262247 sr: FISCHER 538257 sr_no_br: 538257 sr_no_br_cl: 538257 sr_cl: FISCHER538257 sr_dash: sold: 15.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 80 mm Length (Wall plug) 80 mm n: FISCHER 538257 DuoPower 10x80 with hexagonal screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 10) 10x DuoPower 10x 80 10x hexagon screw 7.0x 107 kts: DuoPower 10x80 with hexagonal screw kpn: 538257 kpn_dash: kpn_clear: 538257 bkpn: FISCHER 538257 bkpn_clear: FISCHER 538257 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 538257 sr_ns: FISCHER538257
r: 08134132 p: 1.44 pid: 176410 b: FISCHER q: 0 st: lt: 8 ean: 4048962298888 sr: FISCHER 542591 sr_no_br: 542591 sr_no_br_cl: 542591 sr_cl: FISCHER542591 sr_dash: sold: 14.4 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542591 Hollow wall plug DuoTec 12 S PH with metric spherical head screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 S PH with metric spherical head screw kpn: 542591 kpn_dash: kpn_clear: 542591 bkpn: FISCHER 542591 bkpn_clear: FISCHER 542591 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 542591 sr_ns: FISCHER542591
r: 02062336 p: 0.066 pid: 95236 b: FISCHER q: 0 st: lt: 8 ean: 4006209503515 sr: FISCHER 50351 sr_no_br: 50351 sr_no_br_cl: 50351 sr_cl: FISCHER50351 sr_dash: sold: 13.2 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 5 mm Application General With collar Yes type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 40 mm n: FISCHER 50351 nail plug N 5 x 40/15 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 5 x 40/15 S with countersunk head kpn: 50351 kpn_dash: kpn_clear: 50351 bkpn: FISCHER 50351 bkpn_clear: FISCHER 50351 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50351 sr_ns: FISCHER50351
r: 03199889 p: 0.47 pid: 176096 b: FISCHER q: 200 st: 1 lt: 1 ean: sr: FISCHER 535461 sr_no_br: 535461 sr_no_br_cl: 535461 sr_cl: FISCHER535461 sr_dash: sold: 11.75 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) T40; HEX 13 mm Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 74 mm Length (Wall plug) 50 mm n: FISCHER 535461 DuoPower 10x50 with hexagonal screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 25) 25x DuoPower 10x 50 25x Hexagon screw 7.0x 69 kts: DuoPower 10x50 with hexagonal screw kpn: 535461 kpn_dash: kpn_clear: 535461 bkpn: FISCHER 535461 bkpn_clear: FISCHER 535461 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535461 sr_ns: FISCHER535461
r: 08134118 p: 0.51 pid: 176342 b: FISCHER q: 0 st: lt: 5 ean: 4048962323733 sr: FISCHER 545678 sr_no_br: 545678 sr_no_br_cl: 545678 sr_cl: FISCHER545678 sr_dash: sold: 10.2 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545678 Plasterboard plug DuoBlade S with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Plasterboard plug DuoBlade S with screw kpn: 545678 kpn_dash: kpn_clear: 545678 bkpn: FISCHER 545678 bkpn_clear: FISCHER 545678 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 545678 sr_ns: FISCHER545678
r: 03297793 p: 0.025 pid: 176142 b: FISCHER q: 0 st: lt: 5 ean: 4048962239829 sr: FISCHER 535452 sr_no_br: 535452 sr_no_br_cl: 535452 sr_cl: FISCHER535452 sr_dash: sold: 10 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 5 mm Max. screw diameter 4 mm Application General type (screw head) With screw No Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 35 mm Length (Wall plug) 25 mm n: FISCHER 535452 DuoPower 5x25 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 100) 100x DuoPower 5x 25 kts: DuoPower 5x25 kpn: 535452 kpn_dash: kpn_clear: 535452 bkpn: FISCHER 535452 bkpn_clear: FISCHER 535452 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535452 sr_ns: FISCHER535452
r: 02890609 p: 0.128 pid: 176039 b: FISCHER q: 150 st: 1 lt: 1 ean: 4048962239928 sr: FISCHER 535463 sr_no_br: 535463 sr_no_br_cl: 535463 sr_cl: FISCHER535463 sr_dash: sold: 6.4 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General type (screw head) PH2 Wall plug type Universal plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 30 mm n: FISCHER 535463 DuoPower 6x30 with ball head screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The panhead screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With suitable panhead screw 4. 5 x 40 for perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 6x 30 50x screw with round head 4.5x 40 kts: DuoPower 6x30 with ball head screw kpn: 535463 kpn_dash: kpn_clear: 535463 bkpn: FISCHER 535463 bkpn_clear: FISCHER 535463 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535463 sr_ns: FISCHER535463
r: 03297798 p: 0.1 pid: 176169 b: FISCHER q: 0 st: lt: 5 ean: 4048962239874 sr: FISCHER 535458 sr_no_br: 535458 sr_no_br_cl: 535458 sr_cl: FISCHER535458 sr_dash: sold: 5 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 5 mm Application General Max. screw diameter 3,5 mm With screw Yes Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 40 mm Length (Wall plug) 25 mm n: FISCHER 535458 DuoPower 5x25 with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 5x 25 50x countersunk screw 3.5x 35 kts: DuoPower 5x25 with screw kpn: 535458 kpn_dash: kpn_clear: 535458 bkpn: FISCHER 535458 bkpn_clear: FISCHER 535458 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535458 sr_ns: FISCHER535458
r: 03308157 p: 0.132 pid: 176213 b: FISCHER q: 200 st: 1 lt: 1 ean: 4048962480894 sr: FISCHER 568110 sr_no_br: 568110 sr_no_br_cl: 568110 sr_cl: FISCHER568110 sr_dash: sold: 3.3 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 10 mm Length (Wall plug) 80 mm n: FISCHER 568110 plug SX Plus 10 x 80 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. This variant, with larger anchorage depths, is Ideal for fixings in hollow building materials, in aerated concrete and for plaster covering. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Greater anchorage depth for better force transmission in hollow building materials and aerated concrete Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 25) 25x SX Plus 10x 80 kts: plug SX Plus 10 x 80 kpn: 568110 kpn_dash: kpn_clear: 568110 bkpn: FISCHER 568110 bkpn_clear: FISCHER 568110 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 568110 sr_ns: FISCHER568110
r: 08134155 p: 22.975 pid: 176412 b: FISCHER q: 0 st: lt: 8 ean: 4048962289268 sr: FISCHER 541357 sr_no_br: 541357 sr_no_br_cl: 541357 sr_cl: FISCHER541357 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Supplied in Case Quantity per set 200 n: FISCHER Fixtainer DuoPower and DuoTec plug set (200 pcs) - 541357 cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description Practical application solutions for the most frequently used applications in the high-quality fischer FixTainer Variable compartments through removable partitions for optimum order. High-quality FixTainer, can be refilled. Reliable functions for solid (spreading) and hollow and sheet material (tapping/knotting). Long version for even better grip in difficult and old substrates. The DuoTec for powerful fastening in sheet material. fischer DuoPower and DuoTec Two components for the highest loads and intelligent functions depending on the substrate. Best possible feedback (feelgood factor) of the plug. You can feel when the plug fits perfectly. The short plug length allows quick installation thanks to the shorter drilling depth. The long version with even more grip in problematic building materials extends the area of application. The narrow edge of the plug prevents it from falling deeper into the drilled hole. The anti-rotation grip bites into the substrate and prevents rotation in the drilled hole. The FixTainer DuoPower assortment box contains the DuoPower plug in short and long versions and the DuoTec 10. Applications Lamps Shelves Light mirror cabinets Letterboxes Paintings Curtains Curtain rails Sink fittings Sanitary and heating fixtures Bath and toilet fittings Wall units Extractor hood TV consoles ds: dsc: Scope of delivery 80x DuoPower 6x 30 50x DuoPower 8x 40 30x DuoPower 6x 50 30x DuoPower 8x 60 10x DuoTec 10 kts: Fixtainer DuoPower and DuoTec plug set (200 pcs) kpn: 541357 kpn_dash: kpn_clear: 541357 bkpn: FISCHER 541357 bkpn_clear: FISCHER 541357 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 541357 sr_ns: FISCHER541357
r: 03308161 p: 22.644 pid: 176234 b: FISCHER q: 0 st: lt: 11 ean: 4048962482317 sr: FISCHER 567905 sr_no_br: 567905 sr_no_br_cl: 567905 sr_cl: FISCHER567905 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER FixTainer - plug set SX Plus, universal plug set UX 6 and 8 S with screws (141 pcs) - 567905 cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description fischer FixTainer - for everyone who plans big. The SX Plus plug and screw box contains the fischer plugs SX Plus, the universal plugs UX, the plasterboard plugs GK and GKM as well as the corresponding screws. The FixTainer boxes come with a carry handle and transparent lid. They can be firmly connected together and thus stacked. In addition, they are compatible with the Sortimo L-Boxx system. With the practical click system for connecting multiple FixTainers together - for easy transport Simple to assemble: The edge of the plug prevents it from falling deeper into the drill hole No expansion pressure on the plug neck. This means that tiles or plaster are not damaged With the appropriate screw for maximum hold Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials ds: dsc: Scope of delivery 50x SX Plus 6x 30 50x UX 6x 35 25x GK 15x GKM 50x screw 4.5x 40 50x Screw 4.5x 45 kts: FixTainer - plug set SX Plus, universal plug set UX 6 and 8 S with screws (141 pcs) kpn: 567905 kpn_dash: kpn_clear: 567905 bkpn: FISCHER 567905 bkpn_clear: FISCHER 567905 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 567905 sr_ns: FISCHER567905
r: 03308160 p: 17.685 pid: 176208 b: FISCHER q: 0 st: lt: 10 ean: 4048962482300 sr: FISCHER 567904 sr_no_br: 567904 sr_no_br_cl: 567904 sr_cl: FISCHER567904 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER FixTainer - dowel set SX Plus 6,8 and 10 (210 pcs) - 567904 cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description fischer FixTainer - for everyone who plans big. The SX Plus plug box contains the fischer expansion plug SX Plus in the diameters 6,8 and 10. The FixTainer boxes come with a carry handle and transparent lid. They can be firmly connected together and thus stacked. In addition, they are compatible with the Sortimo L-Boxx system. With the practical click system for connecting multiple FixTainers together - for easy transport Simple to assemble: The edge of the plug prevents it from falling deeper into the drill hole No expansion pressure on the plug neck. This means that tiles or plaster are not damaged With the appropriate screw for maximum hold Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials ds: dsc: Scope of delivery 120x SX Plus 6x 30 60x SX Plus 8x 40 30x SX Plus 10x 50 kts: FixTainer - dowel set SX Plus 6,8 and 10 (210 pcs) kpn: 567904 kpn_dash: kpn_clear: 567904 bkpn: FISCHER 567904 bkpn_clear: FISCHER 567904 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 567904 sr_ns: FISCHER567904
r: 03308158 p: 16.487 pid: 176211 b: FISCHER q: 0 st: lt: 10 ean: 4048962482201 sr: FISCHER 567894 sr_no_br: 567894 sr_no_br_cl: 567894 sr_cl: FISCHER567894 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 567894 FixTainer - dowel set SX Plus 6,8 and 10 with screws (105 pcs) cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description fischer FixTainer - for everyone who plans big. The SX Plus plug and screw box contains the fischer plugs SX Plus and the corresponding screws. The FixTainer boxes come with a carry handle and transparent lid. They can be firmly connected together and thus stacked. In addition, they are compatible with the Sortimo L-Boxx system. With the practical click system for connecting multiple FixTainers together - for easy transport Simple to assemble: The edge of the plug prevents it from falling deeper into the drill hole No expansion pressure on the plug neck. This means that tiles or plaster are not damaged With the appropriate screw for maximum hold Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials ds: dsc: Scope of delivery 60x SX Plus 6x 30 60x screw 4.5x 40 30x SX Plus 8x 40 30x screw 5,0x 55 15x SX Plus 10x 50 15x Screw 6,0x 85 kts: FixTainer - dowel set SX Plus 6,8 and 10 with screws (105 pcs) kpn: 567894 kpn_dash: kpn_clear: 567894 bkpn: FISCHER 567894 bkpn_clear: FISCHER 567894 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 567894 sr_ns: FISCHER567894
r: 08134114 p: 16.363 pid: 176314 b: FISCHER q: 0 st: lt: 8 ean: 4048962442373 sr: FISCHER 562209 sr_no_br: 562209 sr_no_br_cl: 562209 sr_cl: FISCHER562209 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 160 mm Drill hole depth - mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) T40 n: FISCHER construction plug DuoXpand 10 x 160 T countersunk head - 562209 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 160 T kts: construction plug DuoXpand 10 x 160 T countersunk head kpn: 562209 kpn_dash: kpn_clear: 562209 bkpn: FISCHER 562209 bkpn_clear: FISCHER 562209 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562209 sr_ns: FISCHER562209
