r: 02776782 p: 2.78 pid: 20438 b: FISCHER q: 0 st: lt: 5 ean: 4048962251555 sr: FISCHER 536872 sr_no_br: 536872 sr_no_br_cl: 536872 sr_cl: FISCHER536872 sr_dash: sold: 278 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Max. useful length 70 mm Length 130 mm n: FISCHER 536872 concrete screw FBS II 12x130 70/55/30 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x130 70/55/30 hexagon head kpn: 536872 kpn_dash: kpn_clear: 536872 bkpn: FISCHER 536872 bkpn_clear: FISCHER 536872 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536872 sr_ns: FISCHER536872
r: 02824742 p: 0.26 pid: 176008 b: FISCHER q: 100 st: 1 lt: 1 ean: 4048962293326 sr: FISCHER 541906 sr_no_br: 541906 sr_no_br_cl: 541906 sr_cl: FISCHER541906 sr_dash: sold: 273 p_range: none type: standard act: 1 avo: 1 av: Length 110 mm n: FISCHER 541906 tension sleeve FNH 8 x 110 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: tension sleeve FNH 8 x 110 kpn: 541906 kpn_dash: kpn_clear: 541906 bkpn: FISCHER 541906 bkpn_clear: FISCHER 541906 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541906 sr_ns: FISCHER541906
r: 06511415 p: 4.46 pid: 176223 b: FISCHER q: 0 st: lt: 8 ean: 4006209502655 sr: FISCHER 50265 sr_no_br: 50265 sr_no_br_cl: 50265 sr_cl: FISCHER50265 sr_dash: sold: 267.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 14 mm Length 160 mm Material Stainless steel Width across flats 19 mm n: FISCHER 50265 anchor rod RG M12 x 160 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The fischer anchor rod with roof point and external hexagonal socket for both injection mortars and glass capsules In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete. Threaded rods with chamfered edge and 6-sided for easy mounting with pre-portioned glass capsule. Stainless steel for outdoor use. The wide range from M8 to M30 makes the RGM very widely applicable, offering great flexibility. The many types of approved steel for RG M allows the use all corrosion resistance classes and offers the greatest possible safety in applications. Please note the approvals of the respective glass capsules or injection mortars. The RG M anchor rod is made of stainless steel. The anchor rod is a system accessory for the various mortar cartridges or injection mortars. For individual fixings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the RG M anchor rod is inserted using a rotary-tapping hammer. During installation, the mortar cartridge is broken, mixed and the mortar mass activated. During installation with the injection mortar, the anchor rod is manually pushed into the borehole by means of slight twisting movements. The system is particularly suitable for efficient fixing of machinery, steel structures and support legs outdoors. Applications Anchors with Chemical Capsule RSB and RSB mini Anchors with chemical capsule RM II Anchors with injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus Building materials In connection with fischer glass capsules approved or suitable for cracked and uncracked concrete. In connection with various fischer injection mortars approved or suitable for different building materials. ds: dsc: kts: anchor rod RG M12 x 160 R stainless steel kpn: 50265 kpn_dash: kpn_clear: 50265 bkpn: FISCHER 50265 bkpn_clear: FISCHER 50265 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50265 sr_ns: FISCHER50265
r: 03297777 p: 0.26 pid: 176147 b: FISCHER q: 100 st: 1 lt: 1 ean: 4048962262193 sr: FISCHER 538252 sr_no_br: 538252 sr_no_br_cl: 538252 sr_cl: FISCHER538252 sr_dash: sold: 266.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 100 mm Length (Wall plug) 80 mm n: FISCHER 538252 DuoPower 10x80 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 25) 25x DuoPower 10x 80 kts: DuoPower 10x80 kpn: 538252 kpn_dash: kpn_clear: 538252 bkpn: FISCHER 538252 bkpn_clear: FISCHER 538252 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538252 sr_ns: FISCHER538252
r: 02019262 p: 1.76 pid: 10860 b: FISCHER q: 0 st: lt: 8 ean: 4006209902516 sr: FISCHER 90251 sr_no_br: 90251 sr_no_br_cl: 90251 sr_cl: FISCHER90251 sr_dash: sold: 264 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 69 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 15 mm n: FISCHER TA M10 S/20 sleeve anchor with bolt electrolytically galvanised - 90251 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M10 S/20 kpn_dash: kpn_clear: TAM10S20 bkpn: FISCHER TA M10 S/20 bkpn_clear: FISCHER TAM10S20 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90251 sr_ns: FISCHER90251
r: 02867941 p: 3.77 pid: 175991 b: FISCHER q: 0 st: lt: 6 ean: 4048962265279 sr: FISCHER 538666 sr_no_br: 538666 sr_no_br_cl: 538666 sr_cl: FISCHER538666 sr_dash: sold: 263.9 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538666 Universal bracket MW Clix 90° pre-assembled cn: RAIL CONNECTOR cn2: RAIL CONNECTOR cn_clear: RAILCONNECTOR d: Product description The pre-assembled angle bracket MW Clix 90° Element for the stable construction of angle connections between FLS mounting channels. Simple creation of rail constructions in connection with FLS channels and FSM Clix P Corrosion protection suitable for the application due to galvanisation For use in dry interior areas Pre-assembled accessories like SF Clix bring the number of articles for a connection down and guarantee a time-saving installation The pre-assembled connector of the MW Clix secures the installation position due to the unique thrust block and guarantees a safe and fast installation The especially developed spring leg at the pre-assembled connector guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The form-locking and accurately fitting angle bracket of the MW clix allows a simple installation of the FLS channel and saves valuable installation time Application Element for the stable construction of angle connections with FLS channels For use in dry interior areas ds: dsc: kts: Universal bracket MW Clix 90° pre-assembled kpn: 538666 kpn_dash: kpn_clear: 538666 bkpn: FISCHER 538666 bkpn_clear: FISCHER 538666 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Rail connector | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer rail connector sr_no_br_cl_ns: 538666 sr_ns: FISCHER538666
r: 02062343 p: 0.31 pid: 21989 b: FISCHER q: 0 st: lt: 6 ean: 4006209503591 sr: FISCHER 50359 sr_no_br: 50359 sr_no_br_cl: 50359 sr_cl: FISCHER50359 sr_dash: sold: 263.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 120 mm n: FISCHER 50359 nail plug N 8 x 120/80 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 8 x 120/80 S with countersunk head kpn: 50359 kpn_dash: kpn_clear: 50359 bkpn: FISCHER 50359 bkpn_clear: FISCHER 50359 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50359 sr_ns: FISCHER50359
r: 02020178 p: 4.37 pid: 17186 b: FISCHER q: 0 st: lt: 10 ean: 4006209970737 sr: FISCHER 97073 sr_no_br: 97073 sr_no_br_cl: 97073 sr_cl: FISCHER97073 sr_dash: sold: 262.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 20 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97073 highbond anchor FHB II-A S M10 x 60/20 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/20 ev kpn: 97073 kpn_dash: kpn_clear: 97073 bkpn: FISCHER 97073 bkpn_clear: FISCHER 97073 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97073 sr_ns: FISCHER97073
r: 02019256 p: 1.02 pid: 10618 b: FISCHER q: 0 st: lt: 8 ean: 4006209902493 sr: FISCHER 90249 sr_no_br: 90249 sr_no_br_cl: 90249 sr_cl: FISCHER90249 sr_dash: sold: 255 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 49 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER TA M6 S/10 sleeve anchor with bolt electrolytically galvanised - 90249 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M6 S/10 kpn_dash: kpn_clear: TAM6S10 bkpn: FISCHER TA M6 S/10 bkpn_clear: FISCHER TAM6S10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90249 sr_ns: FISCHER90249
r: 87051370 p: 2.55 pid: 17228 b: FISCHER q: 0 st: lt: 10 ean: 4048962016758 sr: FISCHER 503135 sr_no_br: 503135 sr_no_br_cl: 503135 sr_cl: FISCHER503135 sr_dash: sold: 255 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 110 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/50 S safety anchor with hexagonal head zinc plated - 503135 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete. The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with hexagonal head zinc plated kpn: FH II 10/50 S kpn_dash: kpn_clear: FHII1050S bkpn: FISCHER FH II 10/50 S bkpn_clear: FISCHER FHII1050S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503135 sr_ns: FISCHER503135
r: 87051359 p: 2.55 pid: 17137 b: FISCHER q: 0 st: lt: 8 ean: 4048962016840 sr: FISCHER 503144 sr_no_br: 503144 sr_no_br_cl: 503144 sr_cl: FISCHER503144 sr_dash: sold: 255 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 110 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/50 B safety anchor with nut zinc plated - 503144 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with threaded bolts with sophisticated design in cracked concrete. The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited to fix railings, steel constructions, and cable trays in cracked and non-cracked concrete. With threaded bolts The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with nut zinc plated kpn: FH II 10/50 B kpn_dash: kpn_clear: FHII1050B bkpn: FISCHER FH II 10/50 B bkpn_clear: FISCHER FHII1050B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503144 sr_ns: FISCHER503144
r: 87051347 p: 2.54 pid: 16032 b: FISCHER q: 0 st: lt: 8 ean: 4048962016802 sr: FISCHER 503140 sr_no_br: 503140 sr_no_br_cl: 503140 sr_cl: FISCHER503140 sr_dash: sold: 254 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 90 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/25 H safety anchor with cap nut zinc plated - 503140 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with cover nut and sophisticated design in cracked concrete. The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II H with cover nut is ideally suited to fix steel constructions, machines, and gates in cracked and non-cracked concrete. With cover nut The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The protruding head for stable and robust fixings The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with cap nut zinc plated kpn: FH II 10/25 H kpn_dash: kpn_clear: FHII1025H bkpn: FISCHER FH II 10/25 H bkpn_clear: FISCHER FHII1025H c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503140 sr_ns: FISCHER503140
r: 02779410 p: 1.66 pid: 19175 b: FISCHER q: 0 st: lt: 8 ean: 4048962244816 sr: FISCHER 535853 sr_no_br: 535853 sr_no_br_cl: 535853 sr_cl: FISCHER535853 sr_dash: sold: 249 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 65 mm Safety anchor No Drilling diameter 12 mm n: FISCHER FH II 12/55-M8 channel plate anchor zinc-plated - 535853 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Economisch systeem, de bout kan tot vijf maal herbruikt worden Geen uitstekende ankerdelen na demontage van het anker. Dit heeft een hogere veiligheid op de bouwplaats en tijdbesparing tot gevolg Gangbare zeskantbout welke ook wordt gebruikt voor andere applicaties, hierdoor hoeft er niet van montagegereedschap te worden gewisseld Grote onderlegring voor een betere krachtenafdracht Suitable for Ankerbout bestaande uit een bout (staalkwaliteit 8. 8) en vervangingsset (onderlegring, nylon ring, kreukelzone, spreidhulsen onderconus) Uitstekend Suitable for tijdelijke bevestiging van betonwanden middels schoren, maar ook voor permanente Application Na demontage blijven de onderconus en spreidhuls achter in het boorgat, deze onderdelen kunnen tezamen met de spreidhuls, nylon ring en onderlegring nabesteld worden Kleinste afmeting tevens Suitable for de bevestiging van F-beugels in kanaalplaatvloeren Building materials Suitable for: Cavity floor slabs C40/50 Application Diagonal props Panels made of concrete ds: dsc: kts: channel plate anchor zinc-plated kpn: FH II 12/55-M8 kpn_dash: FH II 12/55 kpn_clear: FHII1255M8 bkpn: FISCHER FH II 12/55-M8 bkpn_clear: FISCHER FHII1255M8 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 535853 sr_ns: FISCHER535853
r: 02827227 p: 1.31 pid: 176006 b: FISCHER q: 0 st: lt: 4 ean: 4048962271751 sr: FISCHER 539796 sr_no_br: 539796 sr_no_br_cl: 539796 sr_cl: FISCHER539796 sr_dash: sold: 248.9 p_range: none type: standard act: 1 avo: 1 av: For diameter 8 mm Principal hazard property GHS09 Environmental hazard Flash point > 100 °C ADR class UN number ADR packing group EUH-statements EUH208 Conseils de prudence (P) P280 H-statements H411 Hazard class GHS09 Environmental hazard Physical state Solid n: FISCHER 539796 chemical anchor capsule RM II 8 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 8 kpn: 539796 kpn_dash: kpn_clear: 539796 bkpn: FISCHER 539796 bkpn_clear: FISCHER 539796 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539796 sr_ns: FISCHER539796
r: 87051397 p: 2.45 pid: 16314 b: FISCHER q: 0 st: lt: 9 ean: 4048962016789 sr: FISCHER 503138 sr_no_br: 503138 sr_no_br_cl: 503138 sr_cl: FISCHER503138 sr_dash: sold: 245 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 100 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/50 SK safety anchor with countersunk head electrolytically galvanised - 503138 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/50 SK kpn_dash: kpn_clear: FHII1050SK bkpn: FISCHER FH II 10/50 SK bkpn_clear: FISCHER FHII1050SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503138 sr_ns: FISCHER503138
r: 02907539 p: 1.22 pid: 176114 b: FISCHER q: 0 st: lt: 8 ean: 4048962265156 sr: FISCHER 538653 sr_no_br: 538653 sr_no_br_cl: 538653 sr_cl: FISCHER538653 sr_dash: sold: 244 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538653 hammer head screw FHS CLIX 8 x 30 cn: HAMMER HEAD BOLT cn2: HAMMER HEAD BOLT cn_clear: HAMMERHEADBOLT d: Product description Hammer-head bolt for quick and easy fixing in FLS channels The fischer T-head bolt FHS Clix is a fixing element for securely connecting pipe clamps with the fischer mounting channel system FLS. The T-head bolt FHS Clix is securely connected by means of a 90° rotation. The FHS Clix is available in the sizes M8 and M10 and in the lengths 30 to 100 mm. The special contact tongue on the FHS Clix ensures the required contact pressure of the fixing element in the FLS channel in order to ensure safe adjustment during assembly. In addition, the pronounced teeth in the channel nut enable precise and safe positioning in the FLS mounting channels and make the installation process easier. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel nut. For easy connection of pipe clamps to FLS channels by means of grub screws and retaining claws Quick assembly by 90° rotation of the hammerhead screw in the rail Precise locking and secure hold of the FHS Clix in the rail due to serration of the sliding nut Fire protection test R120 MLAR R30 sample cable system test Application-appropriate corrosion protection through galvanisation For use in dry interior areas The special spring leg at the FHS Clix guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The clix-connector element with 90°-turn for connecting enables an easy post-installation in set channels to save time and money The especially developed stop element on the FHS Clix connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a safe and precise installation Application FHS Clix is suitable for connecting pipe clamps with the channel For use in dry interior areas ds: dsc: kts: hammer head screw FHS CLIX 8 x 30 kpn: 538653 kpn_dash: kpn_clear: 538653 bkpn: FISCHER 538653 bkpn_clear: FISCHER 538653 c_path: Home / Fasteners and machine components / Fasteners / Bolts / Hammer head bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer bolts / Fischer hammer head bolt sr_no_br_cl_ns: 538653 sr_ns: FISCHER538653
r: 87993213 p: 3.24 pid: 176395 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209784167 sr: FISCHER 78416 sr_no_br: 78416 sr_no_br_cl: 78416 sr_cl: FISCHER78416 sr_dash: sold: 243 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78416 aerated concrete anchor FTP M8 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M8 metal kpn: 78416 kpn_dash: kpn_clear: 78416 bkpn: FISCHER 78416 bkpn_clear: FISCHER 78416 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78416 sr_ns: FISCHER78416
r: 02907421 p: 4.85 pid: 176098 b: FISCHER q: 0 st: lt: 7 ean: 4048962265842 sr: FISCHER 538739 sr_no_br: 538739 sr_no_br_cl: 538739 sr_cl: FISCHER538739 sr_dash: sold: 242.5 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538739 console ALK 17-300 cn: MOUNTING RAIL cn2: MOUNTING RAIL cn_clear: MOUNTINGRAIL d: Product description Cantilever arm made from FLS channel profile The fischer cantilever arms ALK enable the cost-effective fixing of single conduits and pipeline routes along walls as second base elements with the mounting channel profile FLS. Thanks to the slots at 90° to each other, the cantilevers can be easily adjusted. The ALK does not need to be cut to size because fischer offers standard lengths from 200 to 600 mm. The galvanised zinc version is suitable for installation in buildings. The fire inspection report as per MLAR / EN1363-1 of the ALK 37 provides added safety. Scaling on both sides along the rail for accurate and correct placement of pipelines Different lengths available for every application Application-specific corrosion protection due to sendzimir galvanisation For use in dry interior areas The fire inspection report in line with MLAR/EN1363-1 of the ALK 37 guarantees independently tested functional safety The graduated range of lengths allows an ideal adaptation to the application The console's stable base plate offers a secure hold for a load-bearing construction The base plate's long slots, which are at 90° to one another, allow the console to be easily aligned Application Economic installation of single pipes or pipelines along the wall For use in dry interior areas ds: dsc: kts: console ALK 17-300 kpn: 538739 kpn_dash: kpn_clear: 538739 bkpn: FISCHER 538739 bkpn_clear: FISCHER 538739 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting rail | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting rail sr_no_br_cl_ns: 538739 sr_ns: FISCHER538739
r: 02019260 p: 1.18 pid: 9986 b: FISCHER q: 0 st: lt: 8 ean: 4006209902509 sr: FISCHER 90250 sr_no_br: 90250 sr_no_br_cl: 90250 sr_cl: FISCHER90250 sr_dash: sold: 236 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 56 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER TA M8 S/10 sleeve anchor with bolt electrolytically galvanised - 90250 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M8 S/10 kpn_dash: kpn_clear: TAM8S10 bkpn: FISCHER TA M8 S/10 bkpn_clear: FISCHER TAM8S10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90250 sr_ns: FISCHER90250
r: 08134148 p: 26.115 pid: 176365 b: FISCHER q: 0 st: lt: 8 ean: 4048962312058 sr: FISCHER 544154 sr_no_br: 544154 sr_no_br_cl: 544154 sr_cl: FISCHER544154 sr_dash: sold: 235.035 p_range: none type: standard act: 1 avo: 1 av: Net volume 390 ml ADR packing group II ADR class 8 Packaging Cartridge Principal hazard property GHS05 Corrosive UN number UN3259 Conseils de prudence (P) P201; P280; P303 + P361 + P353; P305 + P351 + P338; P310 H-statements H314; H317; H318; H335; H412 Hazard class GHS05 Corrosive; GHS07 Harmful or irritant Physical state Solid n: FISCHER 544154 epoxy injection mortar FIS EM Plus 390 S cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful injection mortar for reinforcement bars and cracked concrete ETA approval option 1 for both cracked and uncracked concrete. Approved for water-filled and diamond-drilled drill holes. Approved for bonding reinforcement. Expoxy Mortar FIS EM Plus can be processed at temperatures down to -5°C. The optimised formulation of epoxy mortar FIS EM Plus leads to improved load values in cracked and uncracked concrete. The ETA rating guarantees a service life of 100 years. The IEA expert report even confirms a service life of up to 120 years, underlining the reliability and durability of FIS EM Plus. The mortar can be used for rebar joints from 8 to 40 mm in diameter. With the threaded bar FIS A, the applicable loads can be variably designed by selecting the anchoring depth. Temporary and removable fixing points are possible with the female threaded anchor RG M I. For practical use on site, FIS EM Plus can be processed at low temperatures down to -5°C. The mortar is approved for diamond-drilled and water-filled drill holes and for seismic applications of performance categories C1, C2 and thus provides safety under extreme conditions. The fischer Injection Mortar FIS EM is a high-quality epoxy mortar with the highest load-bearing capacity in cracked and uncracked concrete as well as seismic applications of performance categories C1, C2. The mortar is suitable for fixings of concrete-concrete connections, high scaffolding or heavy steel structures, for both indoor and outdoor applications. The injection mortar is used together with the approved system components fischer Anchor rod FIS A with variable anchorage depth and fischer Impact anchor with internal thread RG M I, as well as with reinforcing steel. The epoxy mortar is ideally suited for rebar connections, which are placed with a large drilling diameter and a large anchorage depth. The mortar can also be used for diamond-drilled and water-filled holes. Applications Retrofitted reinforcement bars Concrete-concrete joints Shoreline anchors Seismic applications Anchoring in diamond-drilled or water-filled holes Heavy steel structures Silo installations High racking systems Soundproofing walls Temporary or demountable fixings (with female threaded anchor RG M I) Building materials Approved for anchorages in: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: High-density natural stone ds: dsc: Scope of delivery 1 Canister 390 ml 2x FIS MR Plus mixing nozzle kts: epoxy injection mortar FIS EM Plus 390 S kpn: 544154 kpn_dash: kpn_clear: 544154 bkpn: FISCHER 544154 bkpn_clear: FISCHER 544154 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 544154 sr_ns: FISCHER544154
