r: 87030008 p: 0.31 pid: 75646 b: FISCHER q: 500 st: 1 lt: 1 ean: 4006209501146 sr: FISCHER 50114 sr_no_br: 50114 sr_no_br_cl: 50114 sr_cl: FISCHER50114 sr_dash: sold: 229.4 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 75 mm Drill hole depth 90 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No Application General type (screw head) Drilling diameter 14 mm n: FISCHER 50114 plug S 14 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 14 kpn: 50114 kpn_dash: kpn_clear: 50114 bkpn: FISCHER 50114 bkpn_clear: FISCHER 50114 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50114 sr_ns: FISCHER50114
r: 87980001 p: 1.08 pid: 17148 b: FISCHER q: 0 st: lt: 10 ean: 4006209902479 sr: FISCHER 90247 sr_no_br: 90247 sr_no_br_cl: 90247 sr_cl: FISCHER90247 sr_dash: sold: 216 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 15 mm Overall length 69 mm n: FISCHER TA M10 sleeve anchor zinc-plated - 90247 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections High flexibility due to using conventional screws and threaded rods ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor zinc-plated kpn: TA M10 kpn_dash: kpn_clear: TAM10 bkpn: FISCHER TA M10 bkpn_clear: FISCHER TAM10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90247 sr_ns: FISCHER90247
r: 02021220 p: 0.48 pid: 1974 b: FISCHER q: 0 st: lt: 1 ean: 8001132419014 sr: FISCHER 41901 sr_no_br: 41901 sr_no_br_cl: 41901 sr_cl: FISCHER41901 sr_dash: sold: 216 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Length 85 mm n: FISCHER 41901 injection sleeve plastic FIS H 12x85 K cn: SCREEN SLEEVE cn2: SCREEN SLEEVE cn_clear: SCREENSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 12x85 K kpn: 41901 kpn_dash: kpn_clear: 41901 bkpn: FISCHER 41901 bkpn_clear: FISCHER 41901 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Screen sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer screen sleeve sr_no_br_cl_ns: 41901 sr_ns: FISCHER41901
r: 02381020 p: 2.87 pid: 176186 b: FISCHER q: 0 st: lt: 4 ean: 4048962158366 sr: FISCHER 519022 sr_no_br: 519022 sr_no_br_cl: 519022 sr_cl: FISCHER519022 sr_dash: sold: 215.25 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519022 aerated concrete anchor FPX-I M8 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M8 electrolytically galvanised steel kpn: 519022 kpn_dash: kpn_clear: 519022 bkpn: FISCHER 519022 bkpn_clear: FISCHER 519022 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519022 sr_ns: FISCHER519022
r: 08134143 p: 0.35 pid: 176378 b: FISCHER q: 0 st: lt: 8 ean: 4048962428339 sr: FISCHER 558879 sr_no_br: 558879 sr_no_br_cl: 558879 sr_cl: FISCHER558879 sr_dash: sold: 210 p_range: none type: standard act: 1 avo: 1 av: Length 80 mm type (screw head) T25 Drive type Torx Material Steel Surface treatment Zinc plated Number per box 100 n: FISCHER 558879 set screw FAFS 5 x 80 TX25 cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacer screw with stepless adjustability The special operating principle allows infinitely variable adjustment. The attachment can be aligned very precisely. The clip does not rotate during adjustment. The screw head retains its position in the attachment, flush mounting is guaranteed. The PowerFast II engages very quickly in wood, improving processing speed. In addition, the FPF II is also suitable for use in dowels. The thread on the clip allows unscrewing the attachment, which facilitates dismantling. Fischer FAFS set screws are problem solvers for the stepless setting of timber structures or window frames. The special long crown bit turns the screw through the attachment until it is flush with the surface. After removing the crown, the attachment can be adjusted by turning the screw further in or out. The set screw is ideal for fastening and adjusting window frames and railing work on wooden substrates, in masonry or concrete the FAFS can be used in combination with a DuoPower 6x50.A special bit is required for fitting and adjusting the FAFS, which can be ordered separately under article number 558883. Applications Wooden substructures Door frames Window frames Rachelwerk Building materials Wood and wood-based materials ds: dsc: kts: set screw FAFS 5 x 80 TX25 kpn: 558879 kpn_dash: kpn_clear: 558879 bkpn: FISCHER 558879 bkpn_clear: FISCHER 558879 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 558879 sr_ns: FISCHER558879
r: 03297778 p: 0.166 pid: 176133 b: FISCHER q: 325 st: 1 lt: 1 ean: 4048962262209 sr: FISCHER 538253 sr_no_br: 538253 sr_no_br_cl: 538253 sr_cl: FISCHER538253 sr_dash: sold: 207.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 12 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 90 mm Length (Wall plug) 60 mm n: FISCHER 538253 DuoPower 12x60 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 25) 25x DuoPower 12x 60 kts: DuoPower 12x60 kpn: 538253 kpn_dash: kpn_clear: 538253 bkpn: FISCHER 538253 bkpn_clear: FISCHER 538253 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538253 sr_ns: FISCHER538253
r: 02827233 p: 1.38 pid: 176012 b: FISCHER q: 10 st: 1 lt: 1 ean: 4048962271768 sr: FISCHER 539797 sr_no_br: 539797 sr_no_br_cl: 539797 sr_cl: FISCHER539797 sr_dash: sold: 207 p_range: none type: standard act: 1 avo: 1 av: For diameter 10,5 mm EUH-statements EUH208 Length 85 mm ADR class UN number Principal hazard property GHS09 Environmental hazard ADR packing group Conseils de prudence (P) P280 Hazard class GHS09 Environmental hazard Physical state Solid Flash point > 100 °C Packaging Cartridge Drilling diameter 12 mm H-statements H411 n: FISCHER 539797 chemical anchor capsule RM II 10 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 10 kpn: 539797 kpn_dash: kpn_clear: 539797 bkpn: FISCHER 539797 bkpn_clear: FISCHER 539797 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539797 sr_ns: FISCHER539797
r: 02020675 p: 2.57 pid: 16011 b: FISCHER q: 0 st: lt: 8 ean: 4048962001006 sr: FISCHER 500547 sr_no_br: 500547 sr_no_br_cl: 500547 sr_cl: FISCHER500547 sr_dash: sold: 205.6 p_range: none type: standard act: 1 avo: 1 av: For diameter 10 mm Conseils de prudence (P) P280 ADR packing group Length 60 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point > 100 °C Drill hole depth 75 mm Drilling diameter 10 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500547 chemical capsule FHB II-PF 10 x 60 fast-curing cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 10 x 60 fast-curing kpn: 500547 kpn_dash: kpn_clear: 500547 bkpn: FISCHER 500547 bkpn_clear: FISCHER 500547 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500547 sr_ns: FISCHER500547
r: 08134117 p: 0.34 pid: 176344 b: FISCHER q: 0 st: lt: 8 ean: 4048962323726 sr: FISCHER 545677 sr_no_br: 545677 sr_no_br_cl: 545677 sr_cl: FISCHER545677 sr_dash: sold: 204 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545677 Drywall plug DuoBlade cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Drywall plug DuoBlade kpn: 545677 kpn_dash: kpn_clear: 545677 bkpn: FISCHER 545677 bkpn_clear: FISCHER 545677 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 545677 sr_ns: FISCHER545677
r: 02020562 p: 19.793 pid: 17488 b: FISCHER q: 0 st: lt: 8 ean: 4006209976425 sr: FISCHER 97642 sr_no_br: 97642 sr_no_br_cl: 97642 sr_cl: FISCHER97642 sr_dash: sold: 197.93 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 95 mm Width across flats 24 mm Effective length 60 mm Drill hole depth 110 mm Drilling diameter 16 mm n: FISCHER 97642 highbond anchor FHB II-A S M16 x 95/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M16 x 95/60 stainless steel A4 kpn: 97642 kpn_dash: kpn_clear: 97642 bkpn: FISCHER 97642 bkpn_clear: FISCHER 97642 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97642 sr_ns: FISCHER97642
r: 02529945 p: 3.29 pid: 176189 b: FISCHER q: 0 st: lt: 8 ean: 4006209436349 sr: FISCHER 43634 sr_no_br: 43634 sr_no_br_cl: 43634 sr_cl: FISCHER43634 sr_dash: sold: 197.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Number per pack 10 n: FISCHER 43634 female threaded anchor FIS E 15 x 85 M12 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M12 kpn: 43634 kpn_dash: kpn_clear: 43634 bkpn: FISCHER 43634 bkpn_clear: FISCHER 43634 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43634 sr_ns: FISCHER43634
r: 02890685 p: 16.363 pid: 176074 b: FISCHER q: 2 st: 1 lt: 1 ean: 4048962245639 sr: FISCHER 535973 sr_no_br: 535973 sr_no_br_cl: 535973 sr_cl: FISCHER535973 sr_dash: sold: 196.356 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 535973 Red-Box DuoPower plug set (280 pcs.) cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description The Duo of power and intelligence The Red-Box, made from high-quality and impact-proof plastic, is ideal for workshop and construction site. The transparent lid provides an overview at a glance. The fischer Red-Box closes securely and can be refilled with plugs. The fischer Red-Box DuoPower contains presorted 30 DuoPower 5 x 25, 140 DuoPower 6 x 30, 80 DuoPower 8 x 40 as well as 30 DuoPower 10 x 50. No searching: most important diameters are pre-sorted Transparent cover: Overview at a glance High-quality assortment box for refilling ds: dsc: Scope of delivery 30x DuoPower 5x25 140x DuoPower 6x30 80x DuoPower 8x40 30x DuoPower 10x50 kts: Red-Box DuoPower plug set (280 pcs.) kpn: 535973 kpn_dash: kpn_clear: 535973 bkpn: FISCHER 535973 bkpn_clear: FISCHER 535973 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 535973 sr_ns: FISCHER535973
r: 87051415 p: 1.08 pid: 37437 b: FISCHER q: 0 st: lt: 8 ean: 4006209685242 sr: FISCHER 68524 sr_no_br: 68524 sr_no_br_cl: 68524 sr_cl: FISCHER68524 sr_dash: sold: 194.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 90 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x85/35 S sleeve anchor with hex bolt electrolytically zinc plated - 68524 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 10x85/35 S kpn_dash: kpn_clear: FSA10x8535S bkpn: FISCHER FSA 10x85/35 S bkpn_clear: FISCHER FSA10x8535S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68524 sr_ns: FISCHER68524
r: 02316727 p: 0.64 pid: 50001 b: FISCHER q: 200 st: 1 lt: 1 ean: 4006209590461 sr: FISCHER 59046 sr_no_br: 59046 sr_no_br_cl: 59046 sr_cl: FISCHER59046 sr_dash: sold: 192 p_range: none type: standard act: 1 avo: 1 av: Length 120 mm Thread designation M6 type (screw head) T25 n: FISCHER 59046 self-drilling set screw JUSS 6 x 120 cn: GRUB SCREW cn2: GRUB SCREW cn_clear: GRUBSCREW d: Product description The adjustable screw for fast and infinitely adjustable installation of timber constructions The fischer adjustable screw JUSS is a special screw with two threads for fast and infinitely adjustable installation of timber constructions. The self-tapping screw is driven in through the component and the parallel thread brings the component down towards the ground. This means that the distance between the component and the ground can be infinitely adjusted by the opposite rotation direction. The fischer adjustable screw is ideal for fixing timber substructures made from slats with a thickness of 20 to 25 mm. Infinitely variable adjustment of the attachment. This means that no wedges or blocks are required for installation. This saves time Self-drilling thread. No pre-drilling is therefore required. This saves time and costs The special operating principle of the adjustable screw JUSS allows for infinite adjustment. This saves on the use of wedges and blocks when fixing the fixture The self-drilling thread of the adjustable screw JUSS cuts directly into the wood Suitable for The JUSS is suitable for push-through installation Once the screw has been screwed in, the parallel thread below the screw head causes the fixture to initially pull against the substrate. The fixture distance can then be infinitely adjusted by modifying the rotation direction Building materials Wood and wooden materials or wooden panels Application Substructures made of wooden battens of 20-30 mm thickness ds: dsc: kts: self-drilling set screw JUSS 6 x 120 kpn: 59046 kpn_dash: kpn_clear: 59046 bkpn: FISCHER 59046 bkpn_clear: FISCHER 59046 c_path: Home / Fasteners and machine components / Fasteners / Screws / Grub screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer grub screw sr_no_br_cl_ns: 59046 sr_ns: FISCHER59046
r: 87990167 p: 0.59 pid: 17153 b: FISCHER q: 0 st: lt: 8 ean: 4006209784112 sr: FISCHER 78411 sr_no_br: 78411 sr_no_br_cl: 78411 sr_cl: FISCHER78411 sr_dash: sold: 191.75 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 4 mm Overall length 50 mm Material Plastic Safety anchor No Drilling diameter 8-(10) mm n: FISCHER FTP K 4 aerated concrete anchor nylon - 78411 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile plastic anchor for aerated concrete. The fischer turbo Aircrete anchor FTP K is a special fixing for fixings in Aircrete. The anchor is made out of high-quality nylon and is set in the pre-positioned installation with the setting tool FTP EK after pre-drilling. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP K is ideally suited to securely fix pictures, lights, cable and pipe clamps to aerated concrete. For wood screws and metric screws High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear due to the setting tool Low axial and edge distances due to expansion pressure-free anchoring The FTP K is suitable for both wood screws and metric screws, and thus offers flexibility in screw choice The spiral-shaped outer thread taps itself into the soft aerated concrete with a positive fit, thus ensuring a secure hold Setting with the FTP EK setting tool requires only a small amount of force. For a convenient installation The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP K is suitable for pre-positioned installation Set the FTP K with setting tool FTP EK. The aircrete anchor taps itself into the aerated concrete with a positive fit during the installation process Suitable for wood and metric screws with diameter 4 to 10 mm Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Letter boxes Signs Motion detectors Cable and pipe clips Stand-off installations ds: dsc: kts: aerated concrete anchor nylon kpn: FTP K 4 kpn_dash: kpn_clear: FTPK4 bkpn: FISCHER FTP K 4 bkpn_clear: FISCHER FTPK4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78411 sr_ns: FISCHER78411
r: 02020031 p: 1.27 pid: 17182 b: FISCHER q: 0 st: lt: 8 ean: 4006209906811 sr: FISCHER 90681 sr_no_br: 90681 sr_no_br_cl: 90681 sr_cl: FISCHER90681 sr_dash: sold: 190.5 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm n: FISCHER 90681 spreader clip FDBB 16 SE cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The expansion element of the fixing system for diamond drills. The fischer fixing set for diamond drills expansion element remains in the drill hole when dismantling the spindle bolt. The spindle bolt is once again completed with an expansion element and can be reused. Pre-positioned installation and push-through installation Active controlled expansion behaviour for high levels of safety Robust, reusable spindle bolt The detachable screw connection between the expansion element and spindle enables simple dismantling and ensures that the spindle bolt can be reused The robust, reusable spindle bolt guarantees a long life span The active principle of the anchor bolt enables an active controlled expansion, thus offering a high level of safety The large steel cross-section provides high shear load-bearing capability and, as such, high security for the jerky stoppage of the drill bit Suitable for The FDBB is suitable for pre-positioned and push-through installation An expansion element must be added to the spindle bolt before installation Use a hammer to drive the FDBB through the base plate of the drilling device into the drill hole When the nut is tightened, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The expansion element remains in the drill hole when dismantling the spindle bolt. The spindle bolt is once again completed with an expansion element and can be reused Building materials Suitable for: Concrete C12/15 to C50/60, non-cracked Natural stone with dense structure Application Diamond and core drilling devices Diamond saws ds: dsc: Scope of delivery (per purchase of 25) 25 x Spreading element kts: spreader clip FDBB 16 SE kpn: 90681 kpn_dash: kpn_clear: 90681 bkpn: FISCHER 90681 bkpn_clear: FISCHER 90681 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 90681 sr_ns: FISCHER90681
r: 02137059 p: 9.41 pid: 21592 b: FISCHER q: 0 st: lt: 8 ean: 4006209957097 sr: FISCHER 95709 sr_no_br: 95709 sr_no_br_cl: 95709 sr_cl: FISCHER95709 sr_dash: sold: 188.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Length 350 mm Material Stainless steel A4 Drilling diameter 12 mm n: FISCHER 95709 anchor rod RG M10 x 350 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M10 x 350 R stainless steel kpn: 95709 kpn_dash: kpn_clear: 95709 bkpn: FISCHER 95709 bkpn_clear: FISCHER 95709 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 95709 sr_ns: FISCHER95709
r: 02020577 p: 18.14 pid: 16166 b: FISCHER q: 0 st: lt: 8 ean: 4006209976203 sr: FISCHER 97620 sr_no_br: 97620 sr_no_br_cl: 97620 sr_cl: FISCHER97620 sr_dash: sold: 181.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 100 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 97620 highbond anchor FHB II-A L M10 x 95/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/100 stainless steel A4 kpn: 97620 kpn_dash: kpn_clear: 97620 bkpn: FISCHER 97620 bkpn_clear: FISCHER 97620 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97620 sr_ns: FISCHER97620
r: 08096928 p: 9.07 pid: 176318 b: FISCHER q: 0 st: lt: 8 ean: 4048962462494 sr: FISCHER 564624 sr_no_br: 564624 sr_no_br_cl: 564624 sr_cl: FISCHER564624 sr_dash: sold: 181.4 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 100 mm Overall length 200 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564624 Piercing anchor FAZ II Plus 12/100 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/100 R stainless steel kpn: 564624 kpn_dash: kpn_clear: 564624 bkpn: FISCHER 564624 bkpn_clear: FISCHER 564624 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564624 sr_ns: FISCHER564624
r: 02776762 p: 1.2 pid: 22011 b: FISCHER q: 250 st: 1 lt: 1 ean: 4048962251456 sr: FISCHER 536862 sr_no_br: 536862 sr_no_br_cl: 536862 sr_cl: FISCHER536862 sr_dash: sold: 180 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 45 mm Length 100 mm n: FISCHER 536862 concrete screw FBS II 10x100 45/35/15 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x100 45/35/15 hexagon head kpn: 536862 kpn_dash: kpn_clear: 536862 bkpn: FISCHER 536862 bkpn_clear: FISCHER 536862 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536862 sr_ns: FISCHER536862
