_

FISCHER 90275 anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8

• Wire dimension: 8 mm
• Length: 110 mm

Delivery time average 15 days.

0.80

€0.66 excl. VAT

[SEARCH SCORE
Sold desc:
1, 33, 0.66 ]
query took: 1787865904.3776

layer :



r: 02890545
p: 0.66
pid: 176058
b: FISCHER
q: 0
st:
lt: 12
ean: 4006209902752
sr: FISCHER 90275
sr_no_br: 90275
sr_no_br_cl: 90275
sr_cl: FISCHER90275
sr_dash:
sold: 33
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 8 mm Length 110 mm
n: FISCHER 90275 anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8
cn: ANCHOR ROD
cn2: ANCHOR ROD
cn_clear: ANCHORROD
d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green
ds:
dsc:
kts: anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8
kpn: 90275
kpn_dash:
kpn_clear: 90275
bkpn: FISCHER 90275
bkpn_clear: FISCHER 90275
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod
sr_no_br_cl_ns: 90275
sr_ns: FISCHER90275

_

FISCHER 50283 anchor rod RG M12 x 220 electrolytically zinc-plated 5.8

• Wire dimension: 12 mm
• Length: 220 mm

Delivery time average 13 days.

1.97

€1.63 excl. VAT

[SEARCH SCORE
Sold desc:
1, 32.6, 1.63 ]
query took: 1787865904.3776

layer :



r: 87050182
p: 1.63
pid: 176414
b: FISCHER
q: 0
st:
lt: 10
ean: 4006209502839
sr: FISCHER 50283
sr_no_br: 50283
sr_no_br_cl: 50283
sr_cl: FISCHER50283
sr_dash:
sold: 32.6
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 12 mm Length 220 mm
n: FISCHER 50283 anchor rod RG M12 x 220 electrolytically zinc-plated 5.8
cn: ANCHOR ROD
cn2: ANCHOR ROD
cn_clear: ANCHORROD
d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green
ds:
dsc:
kts: anchor rod RG M12 x 220 electrolytically zinc-plated 5.8
kpn: 50283
kpn_dash:
kpn_clear: 50283
bkpn: FISCHER 50283
bkpn_clear: FISCHER 50283
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod
sr_no_br_cl_ns: 50283
sr_ns: FISCHER50283

_

FISCHER 564587 Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel

• Drilling diameter: 12 mm
• Effective length: 20 mm
• Overall length: 120 mm

On stock, immediately available.

1.92

€1.59 excl. VAT

[SEARCH SCORE
Sold desc:
1, 31.8, 1.59 ]
query took: 1787865904.3776

layer :



r: 08096918
p: 1.59
pid: 176303
b: FISCHER
q: 80
st: 1
lt: 1
ean: 4048962462128
sr: FISCHER 564587
sr_no_br: 564587
sr_no_br_cl: 564587
sr_cl: FISCHER564587
sr_dash:
sold: 31.8
p_range: none
type: standard
act: 1
avo: 1
av: Drilling diameter 12 mm Effective length 20 mm Overall length 120 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12
n: FISCHER 564587 Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel
cn: ANCHOR BOLT
cn2: ANCHOR BOLT
cn_clear: ANCHORBOLT
d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions
ds:
dsc:
kts: Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel
kpn: 564587
kpn_dash:
kpn_clear: 564587
bkpn: FISCHER 564587
bkpn_clear: FISCHER 564587
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt
sr_no_br_cl_ns: 564587
sr_ns: FISCHER564587

_

FISCHER 541894 clamping sleeve FNH 6 x 30

• Length: 30 mm

Delivery time average 11 days.

0.07

€0.06 excl. VAT

[SEARCH SCORE
Sold desc:
1, 30.5, 0.061 ]
query took: 1787865904.3776

layer :



r: 02824727
p: 0.061
pid: 176011
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962293258
sr: FISCHER 541894
sr_no_br: 541894
sr_no_br_cl: 541894
sr_cl: FISCHER541894
sr_dash:
sold: 30.5
p_range: none
type: standard
act: 1
avo: 1
av: Length 30 mm
n: FISCHER 541894 clamping sleeve FNH 6 x 30
cn: CLAMPING SLEEVE
cn2: CLAMPING SLEEVE
cn_clear: CLAMPINGSLEEVE
d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles
ds:
dsc:
kts: clamping sleeve FNH 6 x 30
kpn: 541894
kpn_dash:
kpn_clear: 541894
bkpn: FISCHER 541894
bkpn_clear: FISCHER 541894
c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve
sr_no_br_cl_ns: 541894
sr_ns: FISCHER541894

_

FISCHER 537260 Hollow wall plug DuoTec 10

• Diameter (wall plug): - mm
• Drilling diameter: 10 mm
• Length (Wall plug): 50 mm

Delivery time average 11 days.

0.86

€0.71 excl. VAT

[SEARCH SCORE
Sold desc:
1, 28.4, 0.71 ]
query took: 1787865904.3776

layer :



r: 08134124
p: 0.71
pid: 176374
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962254099
sr: FISCHER 537260
sr_no_br: 537260
sr_no_br_cl: 537260
sr_cl: FISCHER537260
sr_dash:
sold: 28.4
p_range: none
type: standard
act: 1
avo: 1
av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General
n: FISCHER 537260 Hollow wall plug DuoTec 10
cn: WALL PLUG
cn2: WALL PLUG
cn_clear: WALLPLUG
d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the even distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard, Gypsum fibreboard, Wooden panels (e.g. OSB, chipboard, MDF, etc.), Steel sheet, Plastic sheets, Hollow concrete building block Also suitable for: Solid materials such as concrete and wood
ds:
dsc:
kts: Hollow wall plug DuoTec 10
kpn: 537260
kpn_dash:
kpn_clear: 537260
bkpn: FISCHER 537260
bkpn_clear: FISCHER 537260
c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug
sr_no_br_cl_ns: 537260
sr_ns: FISCHER537260

_

FISCHER 557727 duoseal 6 x 38 with stainless steel A2 round head screw

• Diameter (wall plug): - mm
• Drilling diameter: 6 mm
• Length (Wall plug): 35 mm

Delivery time average 11 days.

0.67

€0.55 excl. VAT

[SEARCH SCORE
Sold desc:
1, 27.5, 0.55 ]
query took: 1787865904.3776

layer :



r: 03302413
p: 0.55
pid: 176212
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962402711
sr: FISCHER 557727
sr_no_br: 557727
sr_no_br_cl: 557727
sr_cl: FISCHER557727
sr_dash:
sold: 27.5
p_range: none
type: standard
act: 1
avo: 1
av: Diameter (wall plug) - mm Drilling diameter 6 mm Length (Wall plug) 35 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Universal plug With screw Yes With collar Yes Application General
n: FISCHER 557727 duoseal 6 x 38 with stainless steel A2 round head screw
cn: WALL PLUG
cn2: WALL PLUG
cn_clear: WALLPLUG
d: Product description The waterproof plug for wet areas The DuoSeal completely seals drill holes in tiles without using additional sealant and thus prevents structural damage caused by moisture in the building material. The DuoSeal is ideally suited for tiled surfaces that are very frequently exposed to splashing water. The universal plug can be easily fitted into tiles without damaging them. The red component ensures a firm grip in all building materials. Thus, the DuoSeal achieves the same load values as conventional nylon plugs. The included stainless steel screw is perfect for installation in wet areas and prevents rusting. The soft plastic rim completely seals the drilled hole and flexibly adapts to the shape of the attachment. The DuoSeal meets the highest water exposure class according to DIN 18534. The fischer DuoSeal is a 2-component plug that seals the borehole in wet areas without additional sealant. The nylon plug with the supplied stainless steel screw has been independently tested by the testing and certification institute of the Säure Fliesner Vereinigung e. V. Its water tightness has been confirmed in accordance with ETAG 022 and DIN 18534 up to Water Exposure Class W3-I. Taking into account the national and international sealing standards for wet areas, the DuoSeal in combination with the supplied screw is suitable for applications in commercial, private and public wet areas frequently exposed to splash water and occasional water accumulation. Applications In tiled wet areas such as: Bathrooms Kitchens Spas Swimming pools Sports facilities Laundry rooms Suitable for: Accessories Taps Shower panels Mirrors Shelves Hairdryer holders Kitchen accessories Pipes Building materials Concrete Solid brick Solid sand-lime brick Hollow concrete blocks Vertically perforated brick Perforated sand-lime brick Aerated concrete Plasterboard Gypsum fibreboard Chipboard Gypsum block
ds:
dsc: Scope of delivery (per purchase of 50) 50x DuoSeal 6x 38 50x stainless steel round head screws 4.5x 60 A2
kts: duoseal 6 x 38 with stainless steel A2 round head screw
kpn: 557727
kpn_dash:
kpn_clear: 557727
bkpn: FISCHER 557727
bkpn_clear: FISCHER 557727
c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug
sr_no_br_cl_ns: 557727
sr_ns: FISCHER557727

_

FISCHER 535463 DuoPower 6x30 with ball head screw

• Diameter (wall plug): - mm
• With screw: Yes
• Drilling diameter: 6 mm

On stock, immediately available.

0.16

€0.13 excl. VAT

[SEARCH SCORE
Sold desc:
1, 26.8, 0.134 ]
query took: 1787865904.3776

layer :



r: 02890609
p: 0.134
pid: 176039
b: FISCHER
q: 150
st: 1
lt: 1
ean: 4048962239928
sr: FISCHER 535463
sr_no_br: 535463
sr_no_br_cl: 535463
sr_cl: FISCHER535463
sr_dash:
sold: 26.8
p_range: none
type: standard
act: 1
avo: 1
av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General type (screw head) PH2 Wall plug type Universal plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 30 mm
n: FISCHER 535463 DuoPower 6x30 with ball head screw
cn: WALL PLUG
cn2: WALL PLUG
cn_clear: WALLPLUG
d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The panhead screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With suitable panhead screw 4. 5 x 40 for perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood
ds:
dsc: Scope of delivery (per purchase of 50) 50x DuoPower 6x 30 50x screw with round head 4.5x 40
kts: DuoPower 6x30 with ball head screw
kpn: 535463
kpn_dash:
kpn_clear: 535463
bkpn: FISCHER 535463
bkpn_clear: FISCHER 535463
c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug
sr_no_br_cl_ns: 535463
sr_ns: FISCHER535463

_

FISCHER EA II M10x30 weft anchor zinc plated - 48332

• Wire dimension: 10 mm
• Overall length: 30 mm
• Drilling diameter: 12 mm

Delivery time average 11 days.

0.59

€0.49 excl. VAT

[SEARCH SCORE
Sold desc:
1, 24.5, 0.49 ]
query took: 1787865904.3777

layer :



r: 02019406
p: 0.49
pid: 10622
b: FISCHER
q: 0
st:
lt: 8
ean: 4006209483329
sr: FISCHER 48332
sr_no_br: 48332
sr_no_br_cl: 48332
sr_cl: FISCHER48332
sr_dash:
sold: 24.5
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 10 mm Overall length 30 mm Drilling diameter 12 mm
n: FISCHER EA II M10x30 weft anchor zinc plated - 48332
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props
ds:
dsc:
kts: weft anchor zinc plated
kpn: EA II M10x30
kpn_dash:
kpn_clear: EAIIM10x30
bkpn: FISCHER EA II M10x30
bkpn_clear: FISCHER EAIIM10x30
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 48332
sr_ns: FISCHER48332

_

FISCHER 79759 setscrew GS 8x200

• Length: 200 mm

Delivery time average 11 days.

0.48

€0.40 excl. VAT

[SEARCH SCORE
Sold desc:
1, 20, 0.4 ]
query took: 1787865904.3777

layer :



r: 02062521
p: 0.4
pid: 11095
b: FISCHER
q: 0
st:
lt: 8
ean: 4006209797594
sr: FISCHER 79759
sr_no_br: 79759
sr_no_br_cl: 79759
sr_cl: FISCHER79759
sr_dash:
sold: 20
p_range: none
type: standard
act: 1
avo: 1
av: Length 200 mm
n: FISCHER 79759 setscrew GS 8x200
cn: THREADED STUD
cn2: THREADED STUD
cn_clear: THREADEDSTUD
d: Product description Universal threaded pin for mounting pipes. The fischer threaded pin GS is a connection element between the fixing point in the load-bearing element and the fastening element on the suspended or elevated element. For example, pipes or ventilation ducts are fixed to it. The threaded rod is made of high-quality steel. Zinc-galvanised Simple to assemble Ideal for fischer installation systems Application For use in dry interior areas For indoor and outdoor applications and in environments with high stress to components due to corrosion
ds:
dsc:
kts: setscrew GS 8x200
kpn: 79759
kpn_dash:
kpn_clear: 79759
bkpn: FISCHER 79759
bkpn_clear: FISCHER 79759
c_path: Home / Fasteners and machine components / Fasteners / Threaded rods and threaded ends / Threaded stud | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer threaded rods and threaded ends / Fischer threaded stud
sr_no_br_cl_ns: 79759
sr_ns: FISCHER79759

_

FISCHER 539799 chemical anchor capsule RM II 14

• For diameter: 14 mm
• Principal hazard property: GHS09 Environmental hazard
• Packaging: Cartridge

Delivery time average 11 days.

2.12

€1.75 excl. VAT

[SEARCH SCORE
Sold desc:
1, 17.5, 1.75 ]
query took: 1787865904.3777

layer :



r: 02827236
p: 1.75
pid: 175999
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962271782
sr: FISCHER 539799
sr_no_br: 539799
sr_no_br_cl: 539799
sr_cl: FISCHER539799
sr_dash:
sold: 17.5
p_range: none
type: standard
act: 1
avo: 1
av: For diameter 14 mm Principal hazard property GHS09 Environmental hazard Packaging Cartridge ADR class UN number ADR packing group EUH-statements EUH208 Conseils de prudence (P) P280 H-statements H411 Hazard class GHS09 Environmental hazard Physical state Solid Flash point > 100 °C
n: FISCHER 539799 chemical anchor capsule RM II 14
cn: CHEMICAL ANCHOR
cn2: CHEMICAL ANCHOR
cn_clear: CHEMICALANCHOR
d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes
ds:
dsc:
kts: chemical anchor capsule RM II 14
kpn: 539799
kpn_dash:
kpn_clear: 539799
bkpn: FISCHER 539799
bkpn_clear: FISCHER 539799
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor
sr_no_br_cl_ns: 539799
sr_ns: FISCHER539799