r: 02835961 p: 51.735 pid: 43811 b: WERA q: 0 st: lt: 11 ean: 4013288179197 sr: WERA 05074794001 sr_no_br: 05074794001 sr_no_br_cl: 05074794001 sr_cl: WERA05074794001 sr_dash: sold: 51.735 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074794001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 x 0.9 Nm x 0.9-1.5 Nm kts: Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 kpn_dash: kpn_clear: 7452 bkpn: WERA 7452 bkpn_clear: WERA 7452 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074794001 sr_ns: WERA05074794001
r: 03229855 p: 49.09 pid: 70124 b: WERA q: 0 st: lt: 12 ean: 4013288196460 sr: WERA 05078710001 sr_no_br: 05078710001 sr_no_br_cl: 05078710001 sr_cl: WERA05078710001 sr_dash: sold: 49.09 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 3/4" Connection profile External rectangle n: WERA 7783 E insert tool with piercing square, 14x18 mm, 3/4" x 70 mm - 05078710001 cn: SQUARE DRIVE HEAD cn2: SQUARE DRIVE HEAD cn_clear: SQUAREDRIVEHEAD d: Product description Square drive insert, for 3/4" square socket wrench inserts and 3/4" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting With push-through square with ball lock. With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application For 3/4"square socket wrench inserts and 3/4" connecting parts with square drive Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design With push-through square with ball lock, forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. For 3/4" square socket wrench inserts and 3/4" connecting parts with square drive. With push-through square with ball lock. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7783 E Push-through square insert tool, 14x18 mm, 14x18 x 3/4" x 70 mm kts: insert tool with piercing square, 14x18 mm, 3/4" x 70 mm kpn: 7783 E kpn_dash: kpn_clear: 7783E bkpn: WERA 7783 E bkpn_clear: WERA 7783E c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Square drive head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera square drive head sr_no_br_cl_ns: 05078710001 sr_ns: WERA05078710001
r: 03229769 p: 23.801 pid: 70091 b: WERA q: 0 st: lt: 11 ean: 4013288196071 sr: WERA 05078603001 sr_no_br: 05078603001 sr_no_br_cl: 05078603001 sr_cl: WERA05078603001 sr_dash: sold: 47.602 p_range: none type: standard act: 1 avo: 1 av: Width across flats 10 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle n: WERA 7770 socket spanner 9x12 mm, 10 x 39 mm - 05078603001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 10 x 39 mm kts: socket spanner 9x12 mm, 10 x 39 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078603001 sr_ns: WERA05078603001
r: 02835965 p: 46.115 pid: 42130 b: WERA q: 0 st: lt: 12 ean: 4013288103116 sr: WERA 05074722001 sr_no_br: 05074722001 sr_no_br_cl: 05074722001 sr_cl: WERA05074722001 sr_dash: sold: 46.115 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7466 Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. - 05074722001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7466 x 11 in. lbs. kts: Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. kpn: 7466 kpn_dash: kpn_clear: 7466 bkpn: WERA 7466 bkpn_clear: WERA 7466 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074722001 sr_ns: WERA05074722001
r: 03229773 p: 22.975 pid: 70097 b: WERA q: 0 st: lt: 12 ean: 4013288196033 sr: WERA 05078607001 sr_no_br: 05078607001 sr_no_br_cl: 05078607001 sr_cl: WERA05078607001 sr_dash: sold: 45.95 p_range: none type: standard act: 1 avo: 1 av: Width across flats 14 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle n: WERA 7770 socket spanner 9x12 mm, 14 x 41 mm - 05078607001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 14 x 41 mm kts: socket spanner 9x12 mm, 14 x 41 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078607001 sr_ns: WERA05078607001
r: 03229804 p: 43.305 pid: 71059 b: WERA q: 0 st: lt: 12 ean: 4013288196842 sr: WERA 05078682001 sr_no_br: 05078682001 sr_no_br_cl: 05078682001 sr_cl: WERA05078682001 sr_dash: sold: 43.305 p_range: none type: standard act: 1 avo: 1 av: Width across flats 29 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) External rectangle n: WERA 7780 socket spanner 14x18 mm, 29 x 61 mm - 05078682001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 29 x 69 mm kts: socket spanner 14x18 mm, 29 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078682001 sr_ns: WERA05078682001
r: 02836026 p: 14.38 pid: 43834 b: WERA q: 0 st: lt: 11 ean: 4013288181749 sr: WERA 05137003001 sr_no_br: 05137003001 sr_no_br_cl: 05137003001 sr_cl: WERA05137003001 sr_dash: sold: 43.14 p_range: none type: standard act: 1 avo: 1 av: Accessory/Part type Recalibration kit n: WERA 05137003001 recalibration kit for 7400 series torque screwdrivers with handle size 89mm cn: ACCESSORY/PART TORQUE TOOL cn2: ACCESSORY/PART TORQUE TOOL cn_clear: ACCESSORYPARTTORQUETOOL d: Product description Re-calibration kit for torque wrench series 7400 with handle size 89mm 1 x 395 HO, size 7 mm3 x nut M43 x re-sealing cap Features and benefits ds: dsc: Scope of delivery Re-Calibration-Set Series 7400, 89mm handle kts: recalibration kit for 7400 series torque screwdrivers with handle size 89mm kpn: 05137003001 kpn_dash: kpn_clear: 05137003001 bkpn: WERA 05137003001 bkpn_clear: WERA 05137003001 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Accessory/part torque tool | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera accessory/part torque tool sr_no_br_cl_ns: 05137003001 sr_ns: WERA05137003001
r: 08131747 p: 38.677 pid: 173535 b: WERA q: 0 st: lt: 8 ean: 4013288233066 sr: WERA 05020177001 sr_no_br: 05020177001 sr_no_br_cl: 05020177001 sr_cl: WERA05020177001 sr_dash: sold: 38.677 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 16 - 19 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle Product Range Wera Joker n: WERA 7870 Joker L self-adjusting insert spanner for spanner size 16-19 mm, 9x12 mm - 05020177001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting For hexagon screw heads and bolts with wrench sizes 16.0; 17.0; 18.0; 19.0 (metric) For hexagon screw heads and bolts with wrench sizes 5/8"; 11/16"; 3/4" (imperial) With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts Drive 9x12 mm; for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting Design Self-setting spanner with ratchet functionality; jaw adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 9x12 mm mounting. With its automatically and continuously gripping parallel jaws, the 7870 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7870 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7870 Joker L Self-setting insert spanner for wrench sizes 16-19 mm, 9x12 mm, 9x12 x 16-19 x 5/8-3/4" x 77.7 mm kts: self-adjusting insert spanner for spanner size 16-19 mm, 9x12 mm kpn: 7870 Joker L kpn_dash: kpn_clear: 7870JokerL bkpn: WERA 7870 Joker L bkpn_clear: WERA 7870JokerL c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020177001 sr_ns: WERA05020177001
r: 08131748 p: 38.347 pid: 173532 b: WERA q: 0 st: lt: 8 ean: 4013288233059 sr: WERA 05020176001 sr_no_br: 05020176001 sr_no_br_cl: 05020176001 sr_cl: WERA05020176001 sr_dash: sold: 38.347 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 13 - 16 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle Product Range Wera Joker n: WERA 7870 Joker M self-adjusting insert spanner for spanner size 13-16 mm, 9x12 mm - 05020176001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts Drive 9x12 mm; for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting Design Self-setting spanner with ratchet functionality; jaw adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 9x12 mm mounting. With its automatically and continuously gripping parallel jaws, the 7870 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7870 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7870 Joker M Self-setting insert spanner for wrench sizes 13-16 mm, 9x12 mm, 9x12 x 13-16 x 1/2-5/8" x 67.7 mm kts: self-adjusting insert spanner for spanner size 13-16 mm, 9x12 mm kpn: 7870 Joker M kpn_dash: kpn_clear: 7870JokerM bkpn: WERA 7870 Joker M bkpn_clear: WERA 7870JokerM c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020176001 sr_ns: WERA05020176001
r: 41071095 p: 37.975 pid: 71788 b: WERA q: 0 st: lt: 15 ean: 4013288093332 sr: WERA 05027931001 sr_no_br: 05027931001 sr_no_br_cl: 05027931001 sr_cl: WERA05027931001 sr_dash: sold: 37.975 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Drive size T7 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,9 Nm Max. tightening torque 0,9 Nm n: WERA 300 TX torque indicator TORX, TX 7 x 0.9 Nm - 05027931001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 7 x 0.9 Nm kts: torque indicator TORX, TX 7 x 0.9 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027931001 sr_ns: WERA05027931001
r: 03229845 p: 36.198 pid: 69802 b: WERA q: 0 st: lt: 8 ean: 4013288196675 sr: WERA 05078701001 sr_no_br: 05078701001 sr_no_br_cl: 05078701001 sr_cl: WERA05078701001 sr_dash: sold: 36.198 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 30 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile External rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 30 x 81 mm - 05078701001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 30 x 74.1 mm kts: insert-ring spanner 14x18 mm, 30 x 81 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078701001 sr_ns: WERA05078701001
r: 03229798 p: 32.066 pid: 71827 b: WERA q: 0 st: lt: 13 ean: 4013288196798 sr: WERA 05078677001 sr_no_br: 05078677001 sr_no_br_cl: 05078677001 sr_cl: WERA05078677001 sr_dash: sold: 32.066 p_range: none type: standard act: 1 avo: 1 av: Width across flats 21 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) External rectangle n: WERA 7780 socket spanner 14x18 mm, 21 x 61 mm - 05078677001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 21 x 61.8 mm kts: socket spanner 14x18 mm, 21 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078677001 sr_ns: WERA05078677001
r: 03229900 p: 30.743 pid: 70547 b: WERA q: 0 st: lt: 8 ean: 4013288196408 sr: WERA 05078655001 sr_no_br: 05078655001 sr_no_br_cl: 05078655001 sr_cl: WERA05078655001 sr_dash: sold: 30.743 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Open ring spanner Drive profile size 17 mm Type of drive profile Twelve-point Connection size 9 x 12 mm Connection profile External rectangle n: WERA 7775 insert-ring spanner open, 9x12 mm, 17 x 44 mm - 05078655001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Open ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7775 Open ring spanner insert, 9x12 mm, 9x12 x 17 x 48.5 mm kts: insert-ring spanner open, 9x12 mm, 17 x 44 mm kpn: 7775 kpn_dash: kpn_clear: 7775 bkpn: WERA 7775 bkpn_clear: WERA 7775 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078655001 sr_ns: WERA05078655001
r: 03229790 p: 30.537 pid: 71819 b: WERA q: 0 st: lt: 12 ean: 4013288196736 sr: WERA 05078671001 sr_no_br: 05078671001 sr_no_br_cl: 05078671001 sr_cl: WERA05078671001 sr_dash: sold: 30.537 p_range: none type: standard act: 1 avo: 1 av: Width across flats 14 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) External rectangle n: WERA 7780 socket spanner 14x18 mm, 14 x 58 mm - 05078671001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 14 x 58.6 mm kts: socket spanner 14x18 mm, 14 x 58 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078671001 sr_ns: WERA05078671001
r: 03229902 p: 30.413 pid: 70552 b: WERA q: 0 st: lt: 8 ean: 4013288196422 sr: WERA 05078657001 sr_no_br: 05078657001 sr_no_br_cl: 05078657001 sr_cl: WERA05078657001 sr_dash: sold: 30.413 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Open ring spanner Drive profile size 19 mm Type of drive profile Twelve-point Connection size 9 x 12 mm Connection profile External rectangle n: WERA 7775 insert-ring spanner open, 9x12 mm, 19 x 49 mm - 05078657001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Open ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7775 Open ring spanner insert, 9x12 mm, 9x12 x 19 x 49.5 mm kts: insert-ring spanner open, 9x12 mm, 19 x 49 mm kpn: 7775 kpn_dash: kpn_clear: 7775 bkpn: WERA 7775 bkpn_clear: WERA 7775 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078657001 sr_ns: WERA05078657001
r: 03229829 p: 30.247 pid: 70118 b: WERA q: 0 st: lt: 8 ean: 4013288196132 sr: WERA 05078690001 sr_no_br: 05078690001 sr_no_br_cl: 05078690001 sr_cl: WERA05078690001 sr_dash: sold: 30.247 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 13 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile External rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 13 x 62 mm - 05078690001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 13 x 61.6 mm kts: insert-ring spanner 14x18 mm, 13 x 62 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078690001 sr_ns: WERA05078690001
r: 03229818 p: 26.942 pid: 71839 b: WERA q: 0 st: lt: 8 ean: 4013288196200 sr: WERA 05078625001 sr_no_br: 05078625001 sr_no_br_cl: 05078625001 sr_cl: WERA05078625001 sr_dash: sold: 26.942 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 12 mm Type of drive profile Twelve-point Connection size 9 x 12 mm Connection profile External rectangle n: WERA 7771 insert-ring spanner 9x12 mm, 12 x 44 mm - 05078625001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7771 Ring spanner insert, 9x12 mm, 9x12 x 12 x 44.5 mm kts: insert-ring spanner 9x12 mm, 12 x 44 mm kpn: 7771 kpn_dash: kpn_clear: 7771 bkpn: WERA 7771 bkpn_clear: WERA 7771 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078625001 sr_ns: WERA05078625001
r: 03229771 p: 26.942 pid: 69773 b: WERA q: 0 st: lt: 12 ean: 4013288196057 sr: WERA 05078605001 sr_no_br: 05078605001 sr_no_br_cl: 05078605001 sr_cl: WERA05078605001 sr_dash: sold: 26.942 p_range: none type: standard act: 1 avo: 1 av: Width across flats 12 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle n: WERA 7770 socket spanner 9x12 mm, 12 x 39 mm - 05078605001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 12 x 41.3 mm kts: socket spanner 9x12 mm, 12 x 39 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078605001 sr_ns: WERA05078605001
r: 03229770 p: 26.776 pid: 70094 b: WERA q: 0 st: lt: 12 ean: 4013288196064 sr: WERA 05078604001 sr_no_br: 05078604001 sr_no_br_cl: 05078604001 sr_cl: WERA05078604001 sr_dash: sold: 26.776 p_range: none type: standard act: 1 avo: 1 av: Width across flats 11 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle n: WERA 7770 socket spanner 9x12 mm, 11 x 39 mm - 05078604001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 11 x 40.9 mm kts: socket spanner 9x12 mm, 11 x 39 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078604001 sr_ns: WERA05078604001
r: 03229776 p: 26.776 pid: 71052 b: WERA q: 0 st: lt: 12 ean: 4013288196019 sr: WERA 05078609001 sr_no_br: 05078609001 sr_no_br_cl: 05078609001 sr_cl: WERA05078609001 sr_dash: sold: 26.776 p_range: none type: standard act: 1 avo: 1 av: Width across flats 16 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) External rectangle n: WERA 7770 socket spanner 9x12 mm, 16 x 41 mm - 05078609001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 16 x 42.7 mm kts: socket spanner 9x12 mm, 16 x 41 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078609001 sr_ns: WERA05078609001
