r: 02142118 p: 14.71 pid: 44168 b: WERA q: 0 st: lt: 14 ean: 4013288160287 sr: WERA 05006466001 sr_no_br: 05006466001 sr_no_br_cl: 05006466001 sr_cl: WERA05006466001 sr_dash: sold: 161.81 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 1 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 iS PZ/S VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm - 05006466001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Combination profile slotted and Pozidriv*, especially for use with terminal strips, fuse boxes, switches, relays. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Application For PlusMinus screws (Pozidriv/slotted) Blade Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted), blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted), # 2 x 100 mm kts: VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm kpn: 165 iS PZ/S kpn_dash: kpn_clear: 165iSPZS bkpn: WERA 165 iS PZ/S bkpn_clear: WERA 165iSPZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006466001 sr_ns: WERA05006466001
r: 87010234 p: 0.94 pid: 72999 b: WERA q: 11 st: 1 lt: 1 ean: 4013288013460 sr: WERA 05072072001 sr_no_br: 05072072001 sr_no_br_cl: 05072072001 sr_cl: WERA05072072001 sr_dash: sold: 161.68 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 Z PH bit Phillips, PH 2 x 25 mm - 05072072001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 Z PH kpn_dash: kpn_clear: 8511ZPH bkpn: WERA 851/1 Z PH bkpn_clear: WERA 8511ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072072001 sr_ns: WERA05072072001
r: 87010100 p: 3.22 pid: 70889 b: WERA q: 49 st: 1 lt: 1 ean: 4013288012630 sr: WERA 05056305001 sr_no_br: 05056305001 sr_no_br_cl: 05056305001 sr_cl: WERA05056305001 sr_dash: sold: 161 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2 mm Drive profile size (bit) 2 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus hexagon bit, 2 x 25 mm - 05056305001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z bits, 2 x 25 mm kts: hexagon bit, 2 x 25 mm kpn: 840/1 Z Hex-Plus kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlus bkpn: WERA 840/1 Z Hex-Plus bkpn_clear: WERA 8401ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056305001 sr_ns: WERA05056305001
r: 02258341 p: 5.95 pid: 43608 b: WERA q: 0 st: lt: 8 ean: 4013288122964 sr: WERA 05059634001 sr_no_br: 05059634001 sr_no_br_cl: 05059634001 sr_cl: WERA05059634001 sr_dash: sold: 160.65 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 152 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 4 mm Drive profile size (bit) 4 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 4 x 152 mm - 05059634001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 4 x 152 mm kts: hexagon bit, 4 x 152 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059634001 sr_ns: WERA05059634001
r: 02318041 p: 5.35 pid: 45797 b: WERA q: 0 st: lt: 14 ean: 4013288031174 sr: WERA 05066325001 sr_no_br: 05066325001 sr_no_br_cl: 05066325001 sr_cl: WERA05066325001 sr_dash: sold: 160.5 p_range: none type: standard act: 1 avo: 1 av: Length 35 mm Drive profile size (bit) 45 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T45 n: WERA 867/1 TORX bit, TX 45 x 35 mm - 05066325001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® bits, TX 45 x 35 mm kts: bit, TX 45 x 35 mm kpn: 867/1 TORX kpn_dash: kpn_clear: 8671TORX bkpn: WERA 867/1 TORX bkpn_clear: WERA 8671TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066325001 sr_ns: WERA05066325001
r: 41071259 p: 7.272 pid: 72606 b: WERA q: 0 st: lt: 12 ean: 4013288107527 sr: WERA 05032055001 sr_no_br: 05032055001 sr_no_br_cl: 05032055001 sr_cl: WERA05032055001 sr_dash: sold: 159.984 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 3367 TX Torx screwdriver, stainless steel, TX 25 x 100 mm - 05032055001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Stainless screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Stainless against extraneous rust Application TORX® socket screws Blade Round Design Stainless steel for minimising rust Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3367 Screwdriver for TORX® screws, stainless, TX 25 x 100 mm kts: Torx screwdriver, stainless steel, TX 25 x 100 mm kpn: 3367 TX kpn_dash: kpn_clear: 3367TX bkpn: WERA 3367 TX bkpn_clear: WERA 3367TX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032055001 sr_ns: WERA05032055001
r: 03229219 p: 26.611 pid: 71017 b: WERA q: 0 st: lt: 8 ean: 4013288187895 sr: WERA 05057776001 sr_no_br: 05057776001 sr_no_br_cl: 05057776001 sr_cl: WERA05057776001 sr_dash: sold: 159.666 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 Number per box 15 n: WERA Bit-Box 15 Impaktor TX Bit-Box 15 Impaktor TX, TX 30 x 25 mm (15 pcs) - 05057776001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with Take it easy tool finder: colour coding according to profile and size stamp. Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Impaktor technology for an above-average service life even under extreme demands The slide switch allows a simple and gradual removal and reinsertion of the bits. The transparent reverse side means that it is easy to know how many bits are still in the box. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. ds: dsc: Scope of delivery Bit-Box 15 Impaktor TX, TX 30 x 25 mm, 15 pieces 15x 867/1 IMP DC Impaktor TORX® bits: TX 30 x 25 mm kts: Bit-Box 15 Impaktor TX, TX 30 x 25 mm (15 pcs) kpn: Bit-Box 15 Impaktor TX kpn_dash: Bit kpn_clear: BitBox15ImpaktorTX bkpn: WERA Bit-Box 15 Impaktor TX bkpn_clear: WERA BitBox15ImpaktorTX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057776001 sr_ns: WERA05057776001
r: 02033081 p: 6.942 pid: 42108 b: WERA q: 10 st: 1 lt: 1 ean: 4013288030603 sr: WERA 05060198001 sr_no_br: 05060198001 sr_no_br_cl: 05060198001 sr_cl: WERA05060198001 sr_dash: sold: 159.666 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 867/4 Z TORX bit, TX 20 x 152 mm - 05060198001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 20 x 152 mm kts: bit, TX 20 x 152 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060198001 sr_ns: WERA05060198001
r: 02829011 p: 10.578 pid: 42618 b: WERA q: 0 st: lt: 8 ean: 4013288172631 sr: WERA 05671388001 sr_no_br: 05671388001 sr_no_br_cl: 05671388001 sr_cl: WERA05671388001 sr_dash: sold: 158.67 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (18 pieces) Product Range Wera Kraftform Kompakt n: WERA 9457 folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm - 05671388001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty folding pocket for up to 18-part Kraftform Compact VDE sets Robust pouch with strong hook and loop fastener system With 3D product labelling Suitable for docking with the Wera 2go system. Features and benefits ds: dsc: Scope of delivery 9457 Folding pouch for 18-piece Kraftform Kompakt VDE sets, empty, 180 x 85 mm kts: folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm kpn: 9457 kpn_dash: kpn_clear: 9457 bkpn: WERA 9457 bkpn_clear: WERA 9457 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05671388001 sr_ns: WERA05671388001
r: 02757456 p: 12.14 pid: 44194 b: WERA q: 0 st: lt: 12 ean: 4013288032218 sr: WERA 05118040001 sr_no_br: 05118040001 sr_no_br_cl: 05118040001 sr_cl: WERA05118040001 sr_dash: sold: 157.82 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T5 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX Kraftform screwdriver, TX 5 x 40 mm - 05118040001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for recessed TORX® screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® Screwdriver for TORX® screws for electronic applications, TX 5 x 40 mm kts: Kraftform screwdriver, TX 5 x 40 mm kpn: 2067 TORX kpn_dash: kpn_clear: 2067TORX bkpn: WERA 2067 TORX bkpn_clear: WERA 2067TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118040001 sr_ns: WERA05118040001
r: 41070315 p: 6.57 pid: 72375 b: WERA q: 2 st: 1 lt: 1 ean: 4013288004031 sr: WERA 05009310001 sr_no_br: 05009310001 sr_no_br_cl: 05009310001 sr_cl: WERA05009310001 sr_dash: sold: 157.68 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ1 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 PZ Pozidriv screwdriver, PZ 1 x 80 mm - 05009310001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver by Wera. Hard handle zones for high working speeds, soft handle zones for a high torque transfer and for fast and smooth work. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ Screwdriver for Pozidriv screws, PZ 1 x 80 mm kts: Pozidriv screwdriver, PZ 1 x 80 mm kpn: 355 PZ kpn_dash: kpn_clear: 355PZ bkpn: WERA 355 PZ bkpn_clear: WERA 355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009310001 sr_ns: WERA05009310001
r: 41070319 p: 13.057 pid: 72382 b: WERA q: 3 st: 1 lt: 1 ean: 4013288004079 sr: WERA 05009320001 sr_no_br: 05009320001 sr_no_br_cl: 05009320001 sr_cl: WERA05009320001 sr_dash: sold: 156.684 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 PZ Pozidriv screwdriver, PZ 3 x 150 mm - 05009320001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver by Wera. Hard handle zones for high working speeds, soft handle zones for a high torque transfer and for fast and smooth work. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ Screwdriver for Pozidriv screws, PZ 3 x 150 mm kts: Pozidriv screwdriver, PZ 3 x 150 mm kpn: 355 PZ kpn_dash: kpn_clear: 355PZ bkpn: WERA 355 PZ bkpn_clear: WERA 355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009320001 sr_ns: WERA05009320001
r: 41071182 p: 8.099 pid: 70691 b: WERA q: 0 st: lt: 16 ean: 4013288108142 sr: WERA 05008752001 sr_no_br: 05008752001 sr_no_br_cl: 05008752001 sr_cl: WERA05008752001 sr_dash: sold: 153.881 p_range: none type: standard act: 1 avo: 1 av: Drive size PH2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 350 SK PH Phillips screwdriver, PH 2 x 100 mm - 05008752001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver with hexagonal blade. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Comes with bolster to allow more torque to be applied. Wera Lasertip literally bites into the head of the screw and thereby prevents any slipping. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Phillips screws Blade Hexagonal, sizes 1 - 3 with bolster Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 350 SK PH Screwdriver for Phillips screws, PH 2 x 100 mm kts: Phillips screwdriver, PH 2 x 100 mm kpn: 350 SK PH kpn_dash: kpn_clear: 350SKPH bkpn: WERA 350 SK PH bkpn_clear: WERA 350SKPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008752001 sr_ns: WERA05008752001
r: 02827919 p: 7.603 pid: 45299 b: WERA q: 0 st: lt: 12 ean: 4013288033154 sr: WERA 05066634001 sr_no_br: 05066634001 sr_no_br_cl: 05066634001 sr_cl: WERA05066634001 sr_dash: sold: 152.06 p_range: none type: standard act: 1 avo: 1 av: Length 32 mm Drive profile size (bit) 1/4" Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 1/4" n: WERA 871/1 TORQ-SET Mplus 32 mm bit, 32 mm - 05066634001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 32 mm, 32 mm kts: bit, 32 mm kpn: 871/1 TORQ-SET Mplus 32 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus32mm bkpn: WERA 871/1 TORQ-SET Mplus 32 mm bkpn_clear: WERA 8711TORQSETMplus32mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066634001 sr_ns: WERA05066634001
r: 87010127 p: 6.33 pid: 70908 b: WERA q: 0 st: lt: 8 ean: 4013288013170 sr: WERA 05056354001 sr_no_br: 05056354001 sr_no_br_cl: 05056354001 sr_cl: WERA05056354001 sr_dash: sold: 151.92 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Ball-end hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 4 mm n: WERA 842/1 Z hexagon bit Ball head, 4 x 25 mm - 05056354001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hexagon ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 842/1 Z bits, 4 x 25 mm kts: hexagon bit Ball head, 4 x 25 mm kpn: 842/1 Z kpn_dash: kpn_clear: 8421Z bkpn: WERA 842/1 Z bkpn_clear: WERA 8421Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056354001 sr_ns: WERA05056354001
r: 02813942 p: 37.851 pid: 18941 b: WERA q: 2 st: 1 lt: 1 ean: 4013288158574 sr: WERA 05073980001 sr_no_br: 05073980001 sr_no_br_cl: 05073980001 sr_cl: WERA05073980001 sr_dash: sold: 151.404 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Impaktor 1 SB screwdriver bit set 10-piece - 05073980001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 1 Impaktor holder with retaining ring and ring magnet, 9 Impaktor bits. The Impaktor technology offers an above-average service life even under extreme circumstances thanks to the best possible utilisation of the material properties and the optimised geometry; particularly suitable for use with customary impact drivers; holder with ring magnet for simple holding of longer and heavier screws, ideal for overhead work. The rough diamond-coating of the bits reduces the risk of a slipping out of the screw head thanks to the enhanced frictional resistance. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Holder with ring magnet for holding longer and heavier screws 1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. The Impaktor holder with ring magnet additionally holds longer and heavier screws absolutely securely. This enables a speedy and dependable positioning of the screw. It is also ideal for above-head work. Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and can thereby be "disabled". Mainly used in manual power tool applications. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 10 Impaktor 1 SB, 10 pieces 1x 897/4 IMP R Impaktor holder with retaining ring and ring magnet: 1/4" x 75 mm 2x 851/1 IMP DC Impaktor bits: PH 2x25 mm, PH 3x25 mm 2x 855/1 IMP DC Impaktor bits: PZ 2x25 mm, PZ 3x25 mm 3x 867/1 IMP DC Impaktor TORX® bits: TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 2x 840/1 IMP DC Impaktor bits: 4x25 mm, 5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Impaktor 1 SB kpn_dash: Bit kpn_clear: BitCheck10Impaktor1SB bkpn: WERA Bit-Check 10 Impaktor 1 SB bkpn_clear: WERA BitCheck10Impaktor1SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073980001 sr_ns: WERA05073980001
r: 87010157 p: 10.07 pid: 71499 b: WERA q: 0 st: lt: 10 ean: 4013288012944 sr: WERA 05059625001 sr_no_br: 05059625001 sr_no_br_cl: 05059625001 sr_cl: WERA05059625001 sr_dash: sold: 151.05 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 8 mm Drive profile size (bit) 8 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 8 x 50 mm - 05059625001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 8 x 50 mm kts: hexagon bit, 8 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059625001 sr_ns: WERA05059625001
r: 41070378 p: 11.56 pid: 70437 b: WERA q: 2 st: 1 lt: 1 ean: 4013288004215 sr: WERA 05028004001 sr_no_br: 05028004001 sr_no_br_cl: 05028004001 sr_cl: WERA05028004001 sr_dash: sold: 150.28 p_range: none type: standard act: 1 avo: 1 av: Drive size T9 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX screwdriver, TX 9 x 60 mm - 05028004001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 Screwdriver for TORX® screws, TX 9 x 60 mm kts: screwdriver, TX 9 x 60 mm kpn: 367 TORX kpn_dash: kpn_clear: 367TORX bkpn: WERA 367 TORX bkpn_clear: WERA 367TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028004001 sr_ns: WERA05028004001
r: 41070350 p: 6.82 pid: 70400 b: WERA q: 0 st: lt: 9 ean: 4013288003942 sr: WERA 05023105001 sr_no_br: 05023105001 sr_no_br_cl: 05023105001 sr_cl: WERA05023105001 sr_dash: sold: 150.04 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Drive size HEX 2 mm Blade length 75 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Hex-Plus n: WERA 354 Hex-Plus hexagonal screwdriver, 2 x 75 mm - 05023105001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Hexagonal screwdriver Hex-Plus Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hex-Plus allows socket head screws to live longer Hexagonal anti-roll feature against rolling away Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 354 Screwdriver for hexagon socket screws, 2 x 75 mm kts: hexagonal screwdriver, 2 x 75 mm kpn: 354 Hex-Plus kpn_dash: 354 Hex kpn_clear: 354HexPlus bkpn: WERA 354 Hex-Plus bkpn_clear: WERA 354HexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023105001 sr_ns: WERA05023105001
r: 87010227 p: 7.83 pid: 71006 b: WERA q: 44 st: 1 lt: 1 ean: 4013288034144 sr: WERA 05059904001 sr_no_br: 05059904001 sr_no_br_cl: 05059904001 sr_cl: WERA05059904001 sr_dash: sold: 148.77 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/4 BDC PZ bit Pozidriv, PZ 3 x 50 mm - 05059904001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. ds: dsc: Scope of delivery 855/4 BDC bits, PZ 3 x 50 mm kts: bit Pozidriv, PZ 3 x 50 mm kpn: 855/4 BDC PZ kpn_dash: kpn_clear: 8554BDCPZ bkpn: WERA 855/4 BDC PZ bkpn_clear: WERA 8554BDCPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059904001 sr_ns: WERA05059904001
