r: 02049097 p: 24.628 pid: 44385 b: WERA q: 0 st: lt: 9 ean: 4013288032294 sr: WERA 05118154001 sr_no_br: 05118154001 sr_no_br_cl: 05118154001 sr_cl: WERA05118154001 sr_dash: sold: 320.164 p_range: none type: standard act: 1 avo: 1 av: Drive type Torx Tamper Resistant VDE approved No With safety colour code 1000V No Quantity per set 6 n: WERA 2067/6 TORX BO micro screwdriver set in holder, 6-piece - 05118154001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Wera Micro screwdriver set for precision mechanical work. Suitable for TORX® BO safety screw connections: TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Kraftform Micro screwdriver set for recessed TORX® screws with safety pin Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Includes practical rack for tidy storage of the screwdrivers Take it easy tool finder: colour coding according to profile and size stamp. Application TORX® socket screws with safety pin (BO = with bore hole) Content 6-piece set and rack in display carton Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067/6 TORX® BO Screwdriver set and rack for electronic applications, 6 pieces 6x 2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications: TX 7x60 mm, TX 8x60 mm, TX 9x60 mm, TX 10x60 mm, TX 15x60 mm, TX 20x60 mm kts: micro screwdriver set in holder, 6-piece kpn: 2067/6 TORX BO kpn_dash: kpn_clear: 20676TORXBO bkpn: WERA 2067/6 TORX BO bkpn_clear: WERA 20676TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05118154001 sr_ns: WERA05118154001
r: 02318105 p: 15.206 pid: 20789 b: WERA q: 8 st: 1 lt: 1 ean: 4013288017574 sr: WERA 05053870001 sr_no_br: 05053870001 sr_no_br_cl: 05053870001 sr_cl: WERA05053870001 sr_dash: sold: 319.326 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon With lock No Magnetic Yes Length 77 mm n: WERA 895/4/1 universal bit holder, 1/4" x 77 mm - 05053870001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. With quick-release chuck for quick bit changes. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive With quick-release chuck and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With strong permanent magnet and quick-release chuck Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The magnetic design enables simplified positioning of the screw. ds: dsc: Scope of delivery 895/4/1 Universal Bit Holder, 1/4" x 77 mm kts: universal bit holder, 1/4" x 77 mm kpn: 895/4/1 kpn_dash: kpn_clear: 89541 bkpn: WERA 895/4/1 bkpn_clear: WERA 89541 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053870001 sr_ns: WERA05053870001
r: 87990886 p: 12.27 pid: 72273 b: WERA q: 5 st: 1 lt: 1 ean: 4013288031297 sr: WERA 05060038001 sr_no_br: 05060038001 sr_no_br_cl: 05060038001 sr_cl: WERA05060038001 sr_dash: sold: 319.02 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/4 Z PZ bit Pozidriv, PZ 2 x 152 mm - 05060038001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z bits, PZ 2 x 152 mm kts: bit Pozidriv, PZ 2 x 152 mm kpn: 855/4 Z PZ kpn_dash: kpn_clear: 8554ZPZ bkpn: WERA 855/4 Z PZ bkpn_clear: WERA 8554ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060038001 sr_ns: WERA05060038001
r: 87010080 p: 2.79 pid: 72837 b: WERA q: 21 st: 1 lt: 1 ean: 4013288015754 sr: WERA 05066305001 sr_no_br: 05066305001 sr_no_br_cl: 05066305001 sr_cl: WERA05066305001 sr_dash: sold: 318.06 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 10 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T10 n: WERA 867/1 TZ TORX bit, TX 10 x 25 mm - 05066305001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 10 x 25 mm kts: bit, TX 10 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066305001 sr_ns: WERA05066305001
r: 02897311 p: 52.727 pid: 31699 b: WERA q: 0 st: lt: 12 ean: 4013288194831 sr: WERA 05073677001 sr_no_br: 05073677001 sr_no_br_cl: 05073677001 sr_cl: WERA05073677001 sr_dash: sold: 316.362 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Bag Quantity per set 12 Product Range Wera Kraftform n: WERA Kraftform micro 12 Electronics 1 micro screwdriver set 12-piece - 05073677001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Wera Micro screwdriver set for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Includes practical rack for tidy storage of the screwdrivers. Kraftform Micro screwdriver for slotted, Phillips, TORX® BO, Hex, IPR and Microstix® screws plus ejector. Kraftform Micro handle for fast and ergonmic working The Wera Black Point tip offers an exact fit and optimum corrosion protection Kraftform Micro set in a robust pouch Take it easy tool finder: colour coding according to profile and size Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips, TORX® BO, TORX PLUS® IPR, Microstix® screws and hexagon headed bolts, screws and nuts. 1 remover. Content 12-piece set, in a belt pouch Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery Kraftform Micro 12 Electronics 1 Screwdriver set for electronic applications, 12 pieces 3x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 2x 2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications: TX 8x60 mm, TX 10x60 mm 1x 2067 IPR TORX PLUS® Screwdriver for electronic applications: 1 IPR x 40 mm 2x 2035 Screwdriver for slotted screws for electronic applications: 0.35x2.5x40 mm, 0.23x1.5x40 mm 2x 2069 Nutdriver for electronic applications: 2.5x60 mm, 3x60 mm 1x 2072 Kraftform Micro screwdriver for Microstix® screws: m x 40 mm 1x 1429 Lifting fork: 1 x 3.5 x 50 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: micro screwdriver set 12-piece kpn: Kraftform micro 12 Electronics 1 kpn_dash: kpn_clear: Kraftformmicro12Electronics1 bkpn: WERA Kraftform micro 12 Electronics 1 bkpn_clear: WERA Kraftformmicro12Electronics1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05073677001 sr_ns: WERA05073677001
r: 03229055 p: 52.727 pid: 70984 b: WERA q: 0 st: lt: 9 ean: 4013288211439 sr: WERA 05004171001 sr_no_br: 05004171001 sr_no_br_cl: 05004171001 sr_cl: WERA05004171001 sr_dash: sold: 316.362 p_range: none type: standard act: 1 avo: 1 av: Bit holder type Inner hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 12 n: WERA Bicycle Set 2 screwdriver handle with interchangeable blades for bicycle in folding case 13-piece - 05004171001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Bicycle tool set in practical pouch with 89 mm long bits. Including 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for fatigue-free working. Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use Practical range for DIY assembly work and repairs Lightweight and robust folding pouch with 12x89 mm long bits Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck Rapidaptor quick-release chuck allows rapid bit change 13-piece set, in a pouch; 1 816 R Kraftform bitholding screwdriver handle with Rapidaptor quick-release chuck, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4; 12 bits, 89 mm long, tough, for universal use Features and benefits Compact screwdriving tool set for bicycle applications, also for mobile use. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Bicycle Set 2, 13 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 2x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm 4x 867/4 Z TORX® bits: TX 10x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 6x 840/4 Z bits: 2x89 mm, 2.5x89 mm, 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with interchangeable blades for bicycle in folding case 13-piece kpn: Bicycle Set 2 kpn_dash: kpn_clear: BicycleSet2 bkpn: WERA Bicycle Set 2 bkpn_clear: WERA BicycleSet2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set sr_no_br_cl_ns: 05004171001 sr_ns: WERA05004171001
r: 08103856 p: 52.727 pid: 71031 b: WERA q: 0 st: lt: 13 ean: 4013288229779 sr: WERA 05051061001 sr_no_br: 05051061001 sr_no_br_cl: 05051061001 sr_cl: WERA05051061001 sr_dash: sold: 316.362 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Inner hexagon Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 838 RA-R M Set 1 ratchet screwdriver set 15-piece - 05051061001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece ratchet screwdriver set. Bitholding screwdriver with intuitive ratchet functionality. The ratchet mechanism with fine toothing integrated in the handle (36 teeth/return angle 10°) eases and accelerates screwdriving without having to reposition the tool. Spinning the tool is also possible. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. Ergonomic switching to clockwise/counterclockwise or position 0. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Magnetic bitholding screwdriver for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor quick-release chuck allows lightning-fast bit changes without any extra tools. The strong permanent magnet holds the bits firmly. 13 tough bits for universal use (Phillips-head Phillips and Pozidriv, TORX®, slotted and hexagonal socket), 89 mm length; chemically nickel-plated. Bitholding screwdriver with Rapidaptor quick-release chuck for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing ensures fast and safe working High working speed: The ratchet mechanism allows to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 15-piece setOne 838 RA-R M bitholding handle with ratchet functionality, 14 bits, chemically nickel-plated, 1/4", 89 mm length Features and benefits Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing (36 teeth) and a return angle of 10° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The integrated ratchet with fine toothing ensures fast and safe working. The ratchet mechanism is completely embedded in the handle. Thanks to the small size of the handle the ratchet can even be used in constricted screwdriving situations. Ergonomic design of the reverse direction switch. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 838 RA-R M Set 1, 15 pieces 1x 838 RA-R M Bit-holding handle with ratchet functionality, 1/4": 1/4" x 123.5 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 4x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm 3x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: ratchet screwdriver set 15-piece kpn: Kraftform Kompakt 838 RA-R M Set 1 kpn_dash: Kraftform Kompakt 838 RA kpn_clear: KraftformKompakt838RARMSet1 bkpn: WERA Kraftform Kompakt 838 RA-R M Set 1 bkpn_clear: WERA KraftformKompakt838RARMSet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051061001 sr_ns: WERA05051061001
r: 02834387 p: 19.669 pid: 19073 b: WERA q: 0 st: lt: 8 ean: 4013288168610 sr: WERA 05300004001 sr_no_br: 05300004001 sr_no_br_cl: 05300004001 sr_cl: WERA05300004001 sr_dash: sold: 314.704 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Bit holder size 4 mm Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD Yes Non-sparking No Product Range Wera Kraftform n: WERA 1013 Kraftform Micro ESD bit holder, 97 mm - 05300004001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description ESD-safe Wera tool. The Kraftform Micro ESD holder for dependable protection against electrostatic energy and associated damage. Electrical surface resistance of<= 10 9 Ohm. Ergonomic Kraftform handle for pleasant and low-fatigue working. Black anti-roll feature prevents any bothersome rolling away at the workplace. Suitable for the take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive. Ideal for applications on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Kraftform Micro ESD bit holder ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle with anti-roll feature and rotating cap Suitable for take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits When doing screwdriving jobs on electronic components (like e.g. smartphones and tablet PCs), there should be no electrostatic discharge as this could cause malfunctions and a complete failure. Therefore, tools that are secure against electrostatic discharge are indispensable. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. ds: dsc: Scope of delivery 1013 Kraftform Micro ESD Bitholding screwdriver, 97 mm kts: bit holder, 97 mm kpn: 1013 Kraftform Micro ESD kpn_dash: kpn_clear: 1013KraftformMicroESD bkpn: WERA 1013 Kraftform Micro ESD bkpn_clear: WERA 1013KraftformMicroESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05300004001 sr_ns: WERA05300004001
r: 02818568 p: 11.59 pid: 45035 b: WERA q: 0 st: lt: 14 ean: 4013288102584 sr: WERA 05059721001 sr_no_br: 05059721001 sr_no_br_cl: 05059721001 sr_cl: WERA05059721001 sr_dash: sold: 312.93 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips/Slotted Connection size (bit) 1/4" VDE approved No Bit tip SL/PH2 n: WERA 851/4 PH/S bit, 2 x 70 mm - 05059721001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with combination profile Phillips/slotted. In electrical applications screws with mixed geometry (slotted and Phillips cross-recess) are quite common. Bits having a PlusMinus profile are optimum for addressing these screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For PlusMinus screws (combination profile Phillips/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application PlusMinus screws (Phillips/slotted) Drive 1/4" hexagon suitable for DIN ISO 1173-F 6.3 bit holders Design PlusMinus (Phillips/slotted), tough, ideal for electrical component adjustment jobs e.g. in sheet steel or metal Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 PH/S PlusMinus bits, # 2 x 70 mm kts: bit, # 2 x 70 mm kpn: 851/4 PH/S kpn_dash: kpn_clear: 8514PHS bkpn: WERA 851/4 PH/S bkpn_clear: WERA 8514PHS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059721001 sr_ns: WERA05059721001
r: 02033077 p: 5.79 pid: 42103 b: WERA q: 15 st: 1 lt: 1 ean: 4013288030672 sr: WERA 05060137001 sr_no_br: 05060137001 sr_no_br_cl: 05060137001 sr_cl: WERA05060137001 sr_dash: sold: 312.66 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 n: WERA 867/4 Z TORX bit, TX 30 x 50 mm - 05060137001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 30 x 50 mm kts: bit, TX 30 x 50 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060137001 sr_ns: WERA05060137001
r: 41070354 p: 9.77 pid: 70599 b: WERA q: 2 st: 1 lt: 1 ean: 4013288003980 sr: WERA 05023120001 sr_no_br: 05023120001 sr_no_br_cl: 05023120001 sr_cl: WERA05023120001 sr_dash: sold: 312.64 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Drive size HEX 5 mm Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Hex-Plus n: WERA 354 Hex-Plus hexagonal screwdriver, 5 x 80 mm - 05023120001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Hexagonal screwdriver Hex-Plus Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hex-Plus allows socket head screws to live longer Hexagonal anti-roll feature against rolling away Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 354 Screwdriver for hexagon socket screws, 5 x 80 mm kts: hexagonal screwdriver, 5 x 80 mm kpn: 354 Hex-Plus kpn_dash: 354 Hex kpn_clear: 354HexPlus bkpn: WERA 354 Hex-Plus bkpn_clear: WERA 354HexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023120001 sr_ns: WERA05023120001
r: 41070273 p: 10.413 pid: 72330 b: WERA q: 0 st: lt: 9 ean: 4013288003669 sr: WERA 05008735001 sr_no_br: 05008735001 sr_no_br_cl: 05008735001 sr_cl: WERA05008735001 sr_dash: sold: 312.39 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 350 PH Phillips screwdriver, PH 3 x 150 mm - 05008735001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Phillips screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 350 PH Screwdriver for Phillips screws, PH 3 x 150 mm kts: Phillips screwdriver, PH 3 x 150 mm kpn: 350 PH kpn_dash: kpn_clear: 350PH bkpn: WERA 350 PH bkpn_clear: WERA 350PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008735001 sr_ns: WERA05008735001
r: 87010101 p: 3.22 pid: 70721 b: WERA q: 4 st: 1 lt: 1 ean: 4013288012647 sr: WERA 05056310001 sr_no_br: 05056310001 sr_no_br_cl: 05056310001 sr_cl: WERA05056310001 sr_dash: sold: 312.34 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus hexagon bit, 2.5 x 25 mm - 05056310001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z bits, 2.5 x 25 mm kts: hexagon bit, 2.5 x 25 mm kpn: 840/1 Z Hex-Plus kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlus bkpn: WERA 840/1 Z Hex-Plus bkpn_clear: WERA 8401ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056310001 sr_ns: WERA05056310001
r: 02827069 p: 10.36 pid: 46911 b: WERA q: 1 st: 1 lt: 1 ean: 4013288030719 sr: WERA 05060192001 sr_no_br: 05060192001 sr_no_br_cl: 05060192001 sr_cl: WERA05060192001 sr_dash: sold: 310.8 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 n: WERA 867/4 Z TORX bit, TX 40 x 89 mm - 05060192001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 40 x 89 mm kts: bit, TX 40 x 89 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060192001 sr_ns: WERA05060192001
r: 02831915 p: 11.9 pid: 19064 b: WERA q: 0 st: lt: 14 ean: 4013288012258 sr: WERA 05051005001 sr_no_br: 05051005001 sr_no_br_cl: 05051005001 sr_cl: WERA05051005001 sr_dash: sold: 309.4 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Overall length 232 mm VDE approved No With safety colour code 1000V ESD No Non-sparking No Bit holder type Inner hexagon n: WERA 810/1 Vario bit holder, 1/4" x 120 mm - 05051005001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description Bit holder with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The integrated retaining ring ensures an optimum fit of the tool in the holder. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and Wera connecting series 1. Bit holder with retaining ring for bits with 1/4" hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Hexagonal blade, chrome-plated Stainless sleeve with retaining ring for secure fit of the bit Application Suitable for 1/4" DIN ISO 1173-C 6.3 hexagon insert bits and Wera Series 1 Blade Hexagon Design Retaining ring, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Proven holder design, optimal fitting of the tool in the holder. Particularly robust for series applications. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 810/1 Bitholding screwdriver with retaining ring, 1/4" x 120 mm kts: bit holder, 1/4" x 120 mm kpn: 810/1 Vario kpn_dash: kpn_clear: 8101Vario bkpn: WERA 810/1 Vario bkpn_clear: WERA 8101Vario c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05051005001 sr_ns: WERA05051005001
r: 87011029 p: 23.636 pid: 21042 b: WERA q: 2 st: 1 lt: 1 ean: 4013288095695 sr: WERA 05056375001 sr_no_br: 05056375001 sr_no_br_cl: 05056375001 sr_cl: WERA05056375001 sr_dash: sold: 307.268 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Universal 3 screwdriver bit set 10-piece - 05056375001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet and quick-release chuck for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Includes Torsion bits to combat premature wear. Tough viscous Wera bits for hexagonal head screws and universal use. Upright positionable, multi-component Bit-Check Rapidaptor holder for rapid bit change Torsion design against premature wear Tough viscous Wera bits for universal use 1 bit holder Rapidaptor with quick-release chuck, 9 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. Bitholders, magnetic, for easier application of the screw The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Bit-Check 10 Universal 3, 10 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 3x 851/1 TZ bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 855/1 TZ bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 3x 800/1 TZ bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Universal 3 kpn_dash: Bit kpn_clear: BitCheck10Universal3 bkpn: WERA Bit-Check 10 Universal 3 bkpn_clear: WERA BitCheck10Universal3 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056375001 sr_ns: WERA05056375001
r: 02021235 p: 6.776 pid: 42770 b: WERA q: 21 st: 1 lt: 1 ean: 4013288094254 sr: WERA 05059630001 sr_no_br: 05059630001 sr_no_br_cl: 05059630001 sr_cl: WERA05059630001 sr_dash: sold: 304.92 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3 mm Drive profile size (bit) 3 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 3 x 89 mm - 05059630001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 3 x 89 mm kts: hexagon bit, 3 x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059630001 sr_ns: WERA05059630001
r: 03176879 p: 21.652 pid: 32944 b: WERA q: 0 st: lt: 9 ean: 4013288219282 sr: WERA 05130002001 sr_no_br: 05130002001 sr_no_br_cl: 05130002001 sr_cl: WERA05130002001 sr_dash: sold: 303.128 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon Length 90 mm n: WERA 881/4/1 SB spacer with variable screw depth adjustment, 3-piece - 05130002001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description For patio construction, the screws should be countersunk to be evenly flush with the decking. The 881/4/1 bit holder with variable screw depth limitation and felt ring allows for a uniform depth and protects the surface from brush marks. Two spare felt rings included. Bit holder for evenly flush countersunk screws in patio construction With adjustable screw depth limitation Felt ring (exchangeable) prevents brush marks on decking Included: 2 spare felt rings Tip Suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design With adjustable screw depth limitation; allows the flush countersinking of screws; the felt ring (exchangeable) in the front of the bit mounting prevents brush marks on the patio decking; the retaining ring holds the bit securely in the holder Drive 1/4" hexagon, suitable for power screwdrivers with mounting as per DIN ISO 1173-F 6.3 Features and benefits Bit holder for evenly flush countersunk screws in patio construction The 881/4/1 bit holder allows for evenly flush countersinking of screws in decking when building patios. The screw depth can be adjusted as required. This prevents screws from being countersunk too deep. The screw head is evenly flush with the decking, therefore so-called "water nests", which usually lead to rot, are avoided. The required screw depth is set using the counter thread. Proven holder design, optimal fitting of the tool in the holder. Particularly robust for series applications. The exchangeable felt ring in the front of the bit mounting prevents brush marks on patio decking. The 881/4/1 bit holder is supplied with 2 spare felt rings. A spare parts kit with 5 felt rings can be ordered with the code number 05130003001. ds: dsc: Scope of delivery 881/4/1 SB Bit holder with variable screw depth limitation, 1/4" x 95 mm 1x 881/4/1 Bit holder with variable screw depth limitation: 1/4" x 95 mm 2x 9201 Felt ring for 881/4/1: 27 mm kts: spacer with variable screw depth adjustment, 3-piece kpn: 881/4/1 SB kpn_dash: kpn_clear: 88141SB bkpn: WERA 881/4/1 SB bkpn_clear: WERA 88141SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05130002001 sr_ns: WERA05130002001
r: 03176965 p: 15.041 pid: 32995 b: WERA q: 0 st: lt: 9 ean: 4013288217783 sr: WERA 05008875001 sr_no_br: 05008875001 sr_no_br_cl: 05008875001 sr_cl: WERA05008875001 sr_dash: sold: 300.82 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 3 Kraftform Kompakt Stubby Magazin 3 - 6-piece - 05008875001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 3, 6 pieces 3x 867/1 BTZ TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 3x 840/1 BTZ bits: 3x25 mm, 4x25 mm, 5x25 mm kts: Kraftform Kompakt Stubby Magazin 3 - 6-piece kpn: Kraftform Kompakt Stubby Magazin 3 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin3 bkpn: WERA Kraftform Kompakt Stubby Magazin 3 bkpn_clear: WERA KraftformKompaktStubbyMagazin3 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008875001 sr_ns: WERA05008875001
r: 41070393 p: 12.03 pid: 71139 b: WERA q: 2 st: 1 lt: 1 ean: 4013288018007 sr: WERA 05018260001 sr_no_br: 05018260001 sr_no_br_cl: 05018260001 sr_cl: WERA05018260001 sr_dash: sold: 300.75 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Blade length 80 mm Blade thickness 0,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A saw-cut screwdriver, 0.6 x 3.5 x 80 mm - 05018260001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera screwdriver to tighten or loosen screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hexagonal blade out of high quality bit material enables a full transfer of force. Ductile tempered material prevents any splintering or breaking of the blade. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Multi-component Kraftform handle for fast and ergonomic screwdriving Smooth hard zones for high speed turning, soft grip zones for high torque transfer The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 0.6 x 3.5 x 80 mm kts: saw-cut screwdriver, 0.6 x 3.5 x 80 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018260001 sr_ns: WERA05018260001
