r: 02827188 p: 8.595 pid: 44636 b: WERA q: 0 st: lt: 12 ean: 4013288094575 sr: WERA 05060054001 sr_no_br: 05060054001 sr_no_br_cl: 05060054001 sr_cl: WERA05060054001 sr_dash: sold: 352.395 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT30 n: WERA 867/4 Z TORX BO bit with bore, TX 30 x 89 mm - 05060054001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with "normal" TORX® tools. Only special TORX® BO tools have a bore which can mount the pin. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® BO bits with bore hole, TX 30 x 89 mm kts: bit with bore, TX 30 x 89 mm kpn: 867/4 Z TORX BO kpn_dash: kpn_clear: 8674ZTORXBO bkpn: WERA 867/4 Z TORX BO bkpn_clear: WERA 8674ZTORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060054001 sr_ns: WERA05060054001
r: 87992262 p: 27.107 pid: 19822 b: WERA q: 0 st: lt: 15 ean: 4013288033741 sr: WERA 05056158001 sr_no_br: 05056158001 sr_no_br_cl: 05056158001 sr_cl: WERA05056158001 sr_dash: sold: 352.391 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 7 Product Range Wera Bit-Check n: WERA Bit-Check 7 TX BO Universal 1 screwdriver bit set 7-piece - 05056158001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. Comes with TORX® BO bits for secure fastening; for universal use. Upright positionable Bit-Checks convince due to their functionality in a minimum of space Universal holder with quick-release chuck for rapid bit change Tough viscous bits for universal use In handy and robust Bit-Check Provides a quick overview of the tools available 1 bit holder with quick-release chuck, 6 bits, tough (Z), for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The non-magnetic version prevents any unwanted attraction of metal filings. ds: dsc: Scope of delivery Bit-Check 7 TX BO Universal 1, 7 pieces 1x 894/4/1 K Universal Bit Holder: 1/4" x 51 mm 6x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 7-piece kpn: Bit-Check 7 TX BO Universal 1 kpn_dash: Bit kpn_clear: BitCheck7TXBOUniversal1 bkpn: WERA Bit-Check 7 TX BO Universal 1 bkpn_clear: WERA BitCheck7TXBOUniversal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056158001 sr_ns: WERA05056158001
r: 41070351 p: 7.02 pid: 70589 b: WERA q: 4 st: 1 lt: 1 ean: 4013288003959 sr: WERA 05023107001 sr_no_br: 05023107001 sr_no_br_cl: 05023107001 sr_cl: WERA05023107001 sr_dash: sold: 351 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Drive size HEX 2,5 mm Blade length 75 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Hex-Plus n: WERA 354 Hex-Plus hexagonal screwdriver, 2.5 x 75 mm - 05023107001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Hexagonal screwdriver Hex-Plus Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hex-Plus allows socket head screws to live longer Hexagonal anti-roll feature against rolling away Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 354 Screwdriver for hexagon socket screws, 2.5 x 75 mm kts: hexagonal screwdriver, 2.5 x 75 mm kpn: 354 Hex-Plus kpn_dash: 354 Hex kpn_clear: 354HexPlus bkpn: WERA 354 Hex-Plus bkpn_clear: WERA 354HexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023107001 sr_ns: WERA05023107001
r: 08121647 p: 115.537 pid: 167038 b: WERA q: 0 st: lt: 9 ean: 4013288232540 sr: WERA 05150105001 sr_no_br: 05150105001 sr_no_br_cl: 05150105001 sr_cl: WERA05150105001 sr_dash: sold: 346.611 p_range: none type: standard act: 1 avo: 1 av: Drive type Mixed VDE approved No With safety colour code 1000V Quantity per set 13 n: WERA 9714 screw chisel/screwdriver set 1 in foam insert, 13-piece - 05150105001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet. Equipped with 13 Wera Kraftform chiseldrivers. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours 13 chiseldrivers for screwdriving, chiseling, mortising Hexagonal blade extending through the handle Impact cap and bolster for the transfer of higher torque 13-piece Wera Kraftform The Chiseldriver set in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 46 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 9714 Foam insert The Chiseldriver screwdriver set 1, 13 pieces 3x 917 SPH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm, PH 3x150 mm 3x 918 SPZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm, PZ 3x150 mm 5x 932 A Screwdriver for slotted screws: 0.6x3.5x80 mm, 0.8x4.5x90 mm, 1x5.5x100 mm, 1.2x7x125 mm, 1.6x9x150 mm 2x 977 Screwdriver for TORX® screws: TX 20x90 mm, TX 25x100 mm 1x 9814 Foam insert The Chiseldriver screwdriver set 1, empty: 344 x 30 x 392 mm kts: screw chisel/screwdriver set 1 in foam insert, 13-piece kpn: 9714 kpn_dash: kpn_clear: 9714 bkpn: WERA 9714 bkpn_clear: WERA 9714 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150105001 sr_ns: WERA05150105001
r: 41070371 p: 15.537 pid: 70605 b: WERA q: 3 st: 1 lt: 1 ean: 4013288004864 sr: WERA 05029440001 sr_no_br: 05029440001 sr_no_br_cl: 05029440001 sr_cl: WERA05029440001 sr_dash: sold: 341.814 p_range: none type: standard act: 1 avo: 1 av: Width across flats 13 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 237 mm Blade length 125 mm VDE approved No n: WERA 395 cap screwdriver 13.0 x 125 mm - 05029440001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description High quality nutsetter by Wera. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hexagonal anti-roll feature prevents any rolling away and handle markings make for simplified finding and sorting of the tool; for hexagon head screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated, nutdriver for hexagon head bolts Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 Nutdriver, 13 x 125 mm kts: cap screwdriver 13.0 x 125 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029440001 sr_ns: WERA05029440001
r: 87010046 p: 3.22 pid: 70708 b: WERA q: 58 st: 1 lt: 1 ean: 4013288012661 sr: WERA 05056320001 sr_no_br: 05056320001 sr_no_br_cl: 05056320001 sr_cl: WERA05056320001 sr_dash: sold: 338.1 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 4 mm Drive profile size (bit) 4 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus hexagon bit, 4 x 25 mm - 05056320001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z bits, 4 x 25 mm kts: hexagon bit, 4 x 25 mm kpn: 840/1 Z Hex-Plus kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlus bkpn: WERA 840/1 Z Hex-Plus bkpn_clear: WERA 8401ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056320001 sr_ns: WERA05056320001
r: 02646676 p: 11.27 pid: 44124 b: WERA q: 0 st: lt: 12 ean: 4013288033109 sr: WERA 05066624001 sr_no_br: 05066624001 sr_no_br_cl: 05066624001 sr_cl: WERA05066624001 sr_dash: sold: 338.1 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 4 Drive profile size (bit) 4 mm n: WERA 871/1 TORQ-SET Mplus 25 mm bit, 25 mm, 4 x 25 mm - 05066624001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 25 mm, 4 x 25 mm kts: bit, 25 mm, 4 x 25 mm kpn: 871/1 TORQ-SET Mplus 25 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus25mm bkpn: WERA 871/1 TORQ-SET Mplus 25 mm bkpn_clear: WERA 8711TORQSETMplus25mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066624001 sr_ns: WERA05066624001
r: 02646682 p: 11.27 pid: 43689 b: WERA q: 0 st: lt: 12 ean: 4013288033123 sr: WERA 05066628001 sr_no_br: 05066628001 sr_no_br_cl: 05066628001 sr_cl: WERA05066628001 sr_dash: sold: 338.1 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 6 Drive profile size (bit) 6 mm n: WERA 871/1 TORQ-SET Mplus 25 mm bit, 25 mm, 6 x 25 mm - 05066628001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 25 mm, 6 x 25 mm kts: bit, 25 mm, 6 x 25 mm kpn: 871/1 TORQ-SET Mplus 25 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus25mm bkpn: WERA 871/1 TORQ-SET Mplus 25 mm bkpn_clear: WERA 8711TORQSETMplus25mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066628001 sr_ns: WERA05066628001
r: 02814987 p: 24.132 pid: 18998 b: WERA q: 0 st: lt: 16 ean: 4013288165657 sr: WERA 05057909001 sr_no_br: 05057909001 sr_no_br_cl: 05057909001 sr_cl: WERA05057909001 sr_dash: sold: 337.848 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 61 n: WERA Bit-Safe 61 Universal 4 screwdriver bit set 61-piece - 05057909001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 61-piece; tough viscous Wera bits for hexagon head screws for universal use. 1 universal holder 899/4/1 K for insertion in the power screwdriver or for use in the chuck of the electric drill. The Bit-Safe provides a rapid overview of the tools Universal holder with stainless sleeve, retaining ring and strong permanent magnet Tough viscous bits for universal use Bit-Safe plastic material ensures robustness and durability Prevents premature breakage of the drive tip 61 pieces1 universal bit holder 899/4/1 K suitable for power tools and electronic drills Features and benefits ds: dsc: Scope of delivery Bit-Safe 61 Universal 4, 61 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 60x 867/1 TORX® bits: 3x TX 10x25 mm, 7x TX 15x25 mm, 20x TX 20x25 mm, 20x TX 25x25 mm, 7x TX 30x25 mm, 3x TX 40x25 mm kts: screwdriver bit set 61-piece kpn: Bit-Safe 61 Universal 4 kpn_dash: Bit kpn_clear: BitSafe61Universal4 bkpn: WERA Bit-Safe 61 Universal 4 bkpn_clear: WERA BitSafe61Universal4 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set sr_no_br_cl_ns: 05057909001 sr_ns: WERA05057909001
r: 02828275 p: 5.62 pid: 44406 b: WERA q: 0 st: lt: 9 ean: 4013288111029 sr: WERA 05071021001 sr_no_br: 05071021001 sr_no_br_cl: 05071021001 sr_cl: WERA05071021001 sr_dash: sold: 337.2 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 3855/1 TS PZ bit Pozidriv, stainless steel, PZ 2 x 25 mm - 05071021001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for Pozidriv screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3855/1 TS bits, stainless, PZ 2 x 25 mm kts: bit Pozidriv, stainless steel, PZ 2 x 25 mm kpn: 3855/1 TS PZ kpn_dash: kpn_clear: 38551TSPZ bkpn: WERA 3855/1 TS PZ bkpn_clear: WERA 38551TSPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071021001 sr_ns: WERA05071021001
r: 02208381 p: 56.033 pid: 43589 b: WERA q: 0 st: lt: 10 ean: 4013288156037 sr: WERA 05051042001 sr_no_br: 05051042001 sr_no_br_cl: 05051042001 sr_cl: WERA05051042001 sr_dash: sold: 336.198 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 13 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Imperial screwdriver handle with interchangeable blades in folding case 17-piece - 05051042001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Comes with a Kraftform holder (816 R) with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Kraftform Plus: Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for both manual and power tool operations; 17-piece. Suitable for manual and power tool operations Smooth hard zones for high speed turning, soft grip zones for high torque transfer Rapidaptor quick-release chuck Tough viscous bits for universal use In robust pouch Pouch with 89 mm bits17-piece set1 Kraftform bitholding screwdriver 816 R with Rapidaptor quick-release chuck Features and benefits Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Frequently, users have to work with their tools at a fixed workplace location as well as at external sites. Just as frequently, it is only on site that a decision is taken as to whether to work manually or with a power tool. The Kraftform Kompakt tool sets equip the user for both types of operation with just single set. Additionally, the sets are kept in belt pouches or plastic cases. This keeps them secure and clean and means that they are clearly arranged for easy tool selection, something that is very practical when they are to be used or transported. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Kraftform Kompakt 60 Imperial, 17 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 4x 840/4 Z bits: 3/32"x89 mm, 1/8"x89 mm, 5/32"x89 mm, 3/16"x89 mm 3x 868/4 Square-Plus bits: # 1x89 mm, # 2x89 mm, # 3x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with interchangeable blades in folding case 17-piece kpn: Kraftform Kompakt 60 Imperial kpn_dash: kpn_clear: KraftformKompakt60Imperial bkpn: WERA Kraftform Kompakt 60 Imperial bkpn_clear: WERA KraftformKompakt60Imperial c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051042001 sr_ns: WERA05051042001
r: 03229055 p: 56.033 pid: 70984 b: WERA q: 0 st: lt: 9 ean: 4013288211439 sr: WERA 05004171001 sr_no_br: 05004171001 sr_no_br_cl: 05004171001 sr_cl: WERA05004171001 sr_dash: sold: 336.198 p_range: none type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 12 n: WERA Bicycle Set 2 screwdriver handle with interchangeable blades for bicycle in folding case 13-piece - 05004171001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Bicycle tool set in practical pouch with 89 mm long bits. Including 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for fatigue-free working. Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use Practical range for DIY assembly work and repairs Lightweight and robust folding pouch with 12x89 mm long bits Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck Rapidaptor quick-release chuck allows rapid bit change 13-piece set, in a pouch; 1 816 R Kraftform bitholding screwdriver handle with Rapidaptor quick-release chuck, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4; 12 bits, 89 mm long, tough, for universal use Features and benefits Compact screwdriving tool set for bicycle applications, also for mobile use. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Bicycle Set 2, 13 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 2x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm 4x 867/4 Z TORX® bits: TX 10x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 6x 840/4 Z bits: 2x89 mm, 2.5x89 mm, 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with interchangeable blades for bicycle in folding case 13-piece kpn: Bicycle Set 2 kpn_dash: kpn_clear: BicycleSet2 bkpn: WERA Bicycle Set 2 bkpn_clear: WERA BicycleSet2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set sr_no_br_cl_ns: 05004171001 sr_ns: WERA05004171001
r: 03228615 p: 56.033 pid: 70031 b: WERA q: 0 st: lt: 14 ean: 4013288211224 sr: WERA 05051017001 sr_no_br: 05051017001 sr_no_br_cl: 05051017001 sr_cl: WERA05051017001 sr_dash: sold: 336.198 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 13 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 20 Tool Finder 2 screwdriver handle with bayonet blade and bit set in bag 13-piece - 05051017001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 13-piece Kraftform Kompakt set with 6x 25mm long and 6x 89mm long bits. Wera's compact tools allow the simultaneous use of both types of screw connections; "hand" or "machine". The handle blade-change system in a compact design with different compact blade tips makes the user mobile and flexible. Suitable for bits with 1/4" hexagonal drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173) and Wera connection series 1 and 4. With connecting adapter, bayonet, Rapidaptor technology, Kraftform handle with anti-roll protection, multi-components allow for particularly ergonomic screwdriving. Integrated magazine for storing 25mm long bits. This set replaces a 12-piece screwdriver set and reduces the necessary equipment to a minimum. Profile and size of the bits are easily recognizable due to the Wera Take it easy tool finder with its colour coding and easily visible labels. Kraftform bit hand-holder with bayonet blade and Rapidaptor quick-change chuck Kraftform handle with anti-roll feature, multi-component and integrated magazine Retractable bayonet blade 6x25mm bits with Take it easy tool finder: colour coding by profile and size stamping and 6x89mm bits In robust pouch Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon socket insert bits and Wera Series 1 and 4 Design Attachment, telescopic, Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology; Take it easy tool finder: Output colour coding and large stamp to enable the desired bit to be easily located. Handle Kraftform with non-roll feature, multi-component, integrated magazine Features and benefits The sets in the series Kraftform Kompakt 20 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. The Rapidaptor technology ensures rapid one hand bit changes, press-in auto bit lock and a secure positioning when used in power tools thanks to the free-turning sleeve. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Kraftform Kompakt 20 Tool Finder 2 with pouch, 13 pieces 1x 889/4 R Rapidaptor Universal Bit Holder: 1/4" x 100 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm 2x 867/1 BTZ TORX® bits: TX 20x25 mm, TX 25x25 mm 2x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm 2x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm 2x 867/4 Z TORX® bits: TX 20x89 mm, TX 25x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with bayonet blade and bit set in bag 13-piece kpn: Kraftform Kompakt 20 Tool Finder 2 kpn_dash: kpn_clear: KraftformKompakt20ToolFinder2 bkpn: WERA Kraftform Kompakt 20 Tool Finder 2 bkpn_clear: WERA KraftformKompakt20ToolFinder2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051017001 sr_ns: WERA05051017001
r: 87010115 p: 4.09 pid: 72843 b: WERA q: 10 st: 1 lt: 1 ean: 4013288013903 sr: WERA 05059860001 sr_no_br: 05059860001 sr_no_br_cl: 05059860001 sr_cl: WERA05059860001 sr_dash: sold: 335.38 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 TH PH bit Phillips, PH 2 x 50 mm - 05059860001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Torsion zone for absorption of peak loads Enhanced service life of the bits Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Torsion-style design to reduce premature wear, extra-hard Features and benefits TH-Bits are hard bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 851/4 TH bits, PH 2 x 50 mm kts: bit Phillips, PH 2 x 50 mm kpn: 851/4 TH PH kpn_dash: kpn_clear: 8514THPH bkpn: WERA 851/4 TH PH bkpn_clear: WERA 8514THPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059860001 sr_ns: WERA05059860001
r: 02813969 p: 37.024 pid: 18501 b: WERA q: 0 st: lt: 8 ean: 4013288163394 sr: WERA 05057688001 sr_no_br: 05057688001 sr_no_br_cl: 05057688001 sr_cl: WERA05057688001 sr_dash: sold: 333.216 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 TX Impaktor 1 screwdriver bit set 10-piece - 05057688001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Impakt holder for the absorption of extreme impulse peaks. Special torsion effect due to the double-torsion spring. Comes with a ring magnet that holds even long and heavy screws extremely securely, making it ideal for overhead work. The magnet can be pushed back and thereby neutralised. Particularly suitable for use with customary impact drivers. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Holder with ring magnet for holding longer and heavier screws 1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. The Impaktor holder with ring magnet additionally holds longer and heavier screws absolutely securely. This enables a speedy and dependable positioning of the screw. It is also ideal for above-head work. Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and can thereby be "disabled". Mainly used in manual power tool applications. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 10 TX Impaktor 1, 10 pieces 1x 897/4 IMP R Impaktor holder with retaining ring and ring magnet: 1/4" x 75 mm 9x 867/1 IMP DC Impaktor TORX® bits: 3x TX 20x25 mm, 3x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 TX Impaktor 1 kpn_dash: Bit kpn_clear: BitCheck10TXImpaktor1 bkpn: WERA Bit-Check 10 TX Impaktor 1 bkpn_clear: WERA BitCheck10TXImpaktor1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057688001 sr_ns: WERA05057688001
r: 08103856 p: 55.33 pid: 71031 b: WERA q: 0 st: lt: 13 ean: 4013288229779 sr: WERA 05051061001 sr_no_br: 05051061001 sr_no_br_cl: 05051061001 sr_cl: WERA05051061001 sr_dash: sold: 331.98 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 838 RA-R M Set 1 ratchet screwdriver set 15-piece - 05051061001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece ratchet screwdriver set. Bitholding screwdriver with intuitive ratchet functionality. The ratchet mechanism with fine toothing integrated in the handle (36 teeth/return angle 10°) eases and accelerates screwdriving without having to reposition the tool. Spinning the tool is also possible. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. Ergonomic switching to clockwise/counterclockwise or position 0. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Magnetic bitholding screwdriver for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor quick-release chuck allows lightning-fast bit changes without any extra tools. The strong permanent magnet holds the bits firmly. 13 tough bits for universal use (Phillips-head Phillips and Pozidriv, TORX®, slotted and hexagonal socket), 89 mm length; chemically nickel-plated. Bitholding screwdriver with Rapidaptor quick-release chuck for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing ensures fast and safe working High working speed: The ratchet mechanism allows to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 15-piece setOne 838 RA-R M bitholding handle with ratchet functionality, 14 bits, chemically nickel-plated, 1/4", 89 mm length Features and benefits Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing (36 teeth) and a return angle of 10° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The integrated ratchet with fine toothing ensures fast and safe working. The ratchet mechanism is completely embedded in the handle. Thanks to the small size of the handle the ratchet can even be used in constricted screwdriving situations. Ergonomic design of the reverse direction switch. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 838 RA-R M Set 1, 15 pieces 1x 838 RA-R M Bit-holding handle with ratchet functionality, 1/4": 1/4" x 123.5 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 4x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm 3x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: ratchet screwdriver set 15-piece kpn: Kraftform Kompakt 838 RA-R M Set 1 kpn_dash: Kraftform Kompakt 838 RA kpn_clear: KraftformKompakt838RARMSet1 bkpn: WERA Kraftform Kompakt 838 RA-R M Set 1 bkpn_clear: WERA KraftformKompakt838RARMSet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051061001 sr_ns: WERA05051061001
r: 87010142 p: 5.67 pid: 70736 b: WERA q: 0 st: lt: 14 ean: 4013288011510 sr: WERA 05059310001 sr_no_br: 05059310001 sr_no_br_cl: 05059310001 sr_cl: WERA05059310001 sr_dash: sold: 328.86 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness 0,6 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 3,5 mm Drive profile size (bit) 3,5 mm n: WERA 800/4 Z slotted screw bit, 0.6 x 3.5 x 50 mm - 05059310001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.6 x 3.5 x 50 mm kts: slotted screw bit, 0.6 x 3.5 x 50 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059310001 sr_ns: WERA05059310001
r: 41070273 p: 10.578 pid: 72330 b: WERA q: 0 st: lt: 9 ean: 4013288003669 sr: WERA 05008735001 sr_no_br: 05008735001 sr_no_br_cl: 05008735001 sr_cl: WERA05008735001 sr_dash: sold: 327.918 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 350 PH Phillips screwdriver, PH 3 x 150 mm - 05008735001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Phillips screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 350 PH Screwdriver for Phillips screws, PH 3 x 150 mm kts: Phillips screwdriver, PH 3 x 150 mm kpn: 350 PH kpn_dash: kpn_clear: 350PH bkpn: WERA 350 PH bkpn_clear: WERA 350PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008735001 sr_ns: WERA05008735001
r: 08103831 p: 18.14 pid: 70262 b: WERA q: 0 st: lt: 10 ean: 4013288230690 sr: WERA 05136414001 sr_no_br: 05136414001 sr_no_br_cl: 05136414001 sr_cl: WERA05136414001 sr_dash: sold: 326.52 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Product Range Wera Kraftform n: WERA 9611 magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm - 05136414001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty magnetic rail. For up to 9 Kraftform screwdrivers. The clips ensure perfect hold und easy access to the tools. With its strong magnet, the rail holds securely to metal surfaces. The rail can also be bolted to the wall. The clips hold the tools perfectly With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. One magnetic rail, empty. For up to 9 Kraftform screwdrivers. The rail allows temporary attachment to metallic surfaces and, thanks to the strong terminals, ensures reliable clamping and easy access to the tools. The rail can also be bolted to the wall. Features and benefits The high-quality aluminium magnetic rail offers space for up to 9 Kraftform screwdrivers. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. ds: dsc: Scope of delivery 9611 Magnetic rail for up to 9 Kraftform screwdrivers, empty, 30 x 400 mm kts: magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm kpn: 9611 kpn_dash: kpn_clear: 9611 bkpn: WERA 9611 bkpn_clear: WERA 9611 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05136414001 sr_ns: WERA05136414001
r: 87010169 p: 8.37 pid: 70959 b: WERA q: 2 st: 1 lt: 1 ean: 4013288014962 sr: WERA 05060029001 sr_no_br: 05060029001 sr_no_br_cl: 05060029001 sr_cl: WERA05060029001 sr_dash: sold: 326.43 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 Z PZ bit Pozidriv, PZ 1 x 89 mm - 05060029001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z bits, PZ 1 x 89 mm kts: bit Pozidriv, PZ 1 x 89 mm kpn: 855/4 Z PZ kpn_dash: kpn_clear: 8554ZPZ bkpn: WERA 855/4 Z PZ bkpn_clear: WERA 8554ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060029001 sr_ns: WERA05060029001
