r: 08103765 p: 97.479 pid: 71582 b: WERA q: 0 st: lt: 9 ean: 4013288228338 sr: WERA 05075851001 sr_no_br: 05075851001 sr_no_br_cl: 05075851001 sr_cl: WERA05075851001 sr_dash: sold: 292.437 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Max. tightening torque 6 Nm Connection size (Handle) 1/4" Supplied in Case Quantity per set 16 Product Range Wera Kraftform n: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 tool set 16-piece - 05075851001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description 16-piece tool set. For professional screwdriving/professional fine adjustment AND for torque-controlled screwdriving. Secure slip-over torque mechanism with quick clockwise/counterclockwise setting and five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited loosening and tightening moments. Quick-release holder for high robustness. Suitable for bits with 1/4" external hexagon drive. 15 tough bits (89 mm length). Torque screwdriver with quick torque adjustment Easy and quick torque setting Fixed position (Torque Lock) for unlimited tightening and loosening moments Secure slip-over torque function for clockwise/anti-clockwise torque-control Quick and easy setting of the selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) 16-piece set Folding pouch with one 7515 torque screwdriver with easy quick torque setting and 15 tough bits (89 mm length) Features and benefits Torque screwdriver with quick torque adjustment Five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Rapid setting of the selectable tightening torques. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Storage and transport in a robust and compact textile roll pouch, so the tool is always close at hand. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 7515/16 Kraftform Safe-Torque Speed Universal 1, 16 pieces 1x 7515 Kraftform Safe-Torque Speed Torque screwdriver, 2-6 Nm: 1/4" x 2.0 Nm x 3.0 Nm x 4.0 Nm x 5.0 Nm x 6.0 Nm x 147.5 mm 1x 851/4 Z bits: PH 2 x 89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 5x 867/4 IP TORX PLUS® bits: 10 IPx89 mm, 15 IPx89 mm, 20 IPx89 mm, 25 IPx89 mm, 30 IPx89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: tool set 16-piece kpn: 7515/16 Kraftform Safe-Torque Speed Universal 1 kpn_dash: 7515/16 Kraftform Safe kpn_clear: 751516KraftformSafeTorqueSpeedUniversal1 bkpn: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 bkpn_clear: WERA 751516KraftformSafeTorqueSpeedUniversal1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075851001 sr_ns: WERA05075851001
r: 08131835 p: 70.082 pid: 173622 b: WERA q: 0 st: lt: 23 ean: 4013288233585 sr: WERA 05075876001 sr_no_br: 05075876001 sr_no_br_cl: 05075876001 sr_cl: WERA05075876001 sr_dash: sold: 280.328 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,4 Nm Max. tightening torque 4 Nm ESD No VDE approved Yes With safety colour code 1000V No Product Range Wera Kraftform n: WERA 7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4-4.0 Nm - 05075876001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description VDE-insulated torque wrench handle with 9 mm hexagon mounting; solely for Wera Kraftform Kompakt VDE blades. For professional screwdriving/fine adjustment AND for torque operated screwdriving. Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation. With five selectable tightening torques clockwise/counterclockwise (2.4; 2.8; 3.2; 3.6; 4.0 Nm), which can be set very quickly. One fixed position (Torque Lock) for unlimited loosening and tightening moments. With fast-rotating sleeve for easy wielding of the tool whilst screwdriving. VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) Speed: Extremely fast setting of desired torque values Safe: Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation Torque Lock function: for high tightening and loosening moments without torque With fast-rotating sleeve and mounting for Wera VDE interchangeable blades Application Solely for Wera VDE blades Design 9 mm hexagon mounting. Five selectable maximum tightening torques. One fixed position (Torque Lock) for unlimited loosening and tightening moments. Precision: ±10 %. Digital torque value display. Reliable slip-over mechanism when the set torque is reached. Handle Kraftform, multi-component Features and benefits VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The Safe-Torque Speed VDE bladeholding screwdriver is suitable solely for Wera VDE blades. Five selectable tightening torques (2.4; 2.8; 3.2; 3.6; 4.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Quick setting of the selectable tightening torque values. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The slip-over torque mechanism for clockwise/counterclockwise torque operation prevents unintentional application of excessive torque. ds: dsc: Scope of delivery 7516 VDE Kraftform Safe-Torque Speed Torque screwdriver, 2.4-4.0 Nm, 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm kts: VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4-4.0 Nm kpn: 7516 kpn_dash: kpn_clear: 7516 bkpn: WERA 7516 bkpn_clear: WERA 7516 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075876001 sr_ns: WERA05075876001
r: 02834266 p: 70.082 pid: 41585 b: WERA q: 1 st: 1 lt: 1 ean: 4013288179135 sr: WERA 05074774001 sr_no_br: 05074774001 sr_no_br_cl: 05074774001 sr_cl: WERA05074774001 sr_dash: sold: 280.328 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7432 Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm - 05074774001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7432 x 0.90-1.50 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm kpn: 7432 kpn_dash: kpn_clear: 7432 bkpn: WERA 7432 bkpn_clear: WERA 7432 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074774001 sr_ns: WERA05074774001
r: 02836001 p: 127.603 pid: 42147 b: WERA q: 0 st: lt: 12 ean: 4013288179029 sr: WERA 05074788001 sr_no_br: 05074788001 sr_no_br_cl: 05074788001 sr_cl: WERA05074788001 sr_dash: sold: 255.206 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7436 ESD Kraftform adjustable torque screwdriver with quick-change holder 0.30-1.00 Nm - 05074788001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Adjustable Kraftform ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-1.0 Nm), 7436 ESD x 0.30-1.00 Nm kts: Kraftform adjustable torque screwdriver with quick-change holder 0.30-1.00 Nm kpn: 7436 ESD kpn_dash: kpn_clear: 7436ESD bkpn: WERA 7436 ESD bkpn_clear: WERA 7436ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074788001 sr_ns: WERA05074788001
r: 02835141 p: 122.975 pid: 41605 b: WERA q: 0 st: lt: 12 ean: 4013288179463 sr: WERA 05074810001 sr_no_br: 05074810001 sr_no_br_cl: 05074810001 sr_cl: WERA05074810001 sr_dash: sold: 245.95 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,05 Nm Bit holder size 4 mm Bit holder type Halfmoon/HIOS ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,05-0,11 Nm Max. tightening torque 0,11 Nm Product Range Wera Kraftform n: WERA 1461 ESD Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.050 Nm - 05074810001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque is reached. Repeatability is 100% guaranteed. Unlimited manual loosening torque. Electrical surface resistance ds: dsc: Scope of delivery 1460 ESD Kraftform Micro torque screwdrivers, with factory pre-set value (0.02-0.11 Nm) and quick-release chuck, 1461 ESD x 0.050 Nm kts: Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.050 Nm kpn: 1461 ESD kpn_dash: kpn_clear: 1461ESD bkpn: WERA 1461 ESD bkpn_clear: WERA 1461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074810001 sr_ns: WERA05074810001
r: 02830466 p: 27.107 pid: 44590 b: WERA q: 0 st: lt: 16 ean: 4013288027887 sr: WERA 05006145001 sr_no_br: 05006145001 sr_no_br_cl: 05006145001 sr_cl: WERA05006145001 sr_dash: sold: 243.963 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 160 i/6 Rack screwdriver set Kraftform Plus Series 100 in holder 6-piece - 05006145001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver. Lasertip blade + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application For slotted and Phillips screws Content 6-pieces set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/6 Rack Screwdriver set Kraftform Plus Series 100 + Rack, 6 pieces 2x 162 i PH VDE Insulated screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus Series 100 in holder 6-piece kpn: 160 i/6 Rack kpn_dash: kpn_clear: 160i6Rack bkpn: WERA 160 i/6 Rack bkpn_clear: WERA 160i6Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006145001 sr_ns: WERA05006145001
r: 02829014 p: 12.727 pid: 31760 b: WERA q: 0 st: lt: 7 ean: 4013288169341 sr: WERA 05671385001 sr_no_br: 05671385001 sr_no_br_cl: 05671385001 sr_cl: WERA05671385001 sr_dash: sold: 241.813 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (12 pieces) Product Range Wera Kraftform n: WERA 9454 folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm - 05671385001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Robust pouch for 12 Kraftform Micro screwdrivers with strong Velcro closure, belt loop and hanging loop, empty. Pouch for Kraftform Micro screwdrivers Robust pouch with strong Velcro closure, belt loop and hanging loop Offers space for 12 Kraftform Micro screwdrivers Features and benefits ds: dsc: Scope of delivery 9454 Pouch for up to 12-piece sets Kraftform Micro screwdrivers, empty, 235 x 115 mm kts: folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm kpn: 9454 kpn_dash: kpn_clear: 9454 bkpn: WERA 9454 bkpn_clear: WERA 9454 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05671385001 sr_ns: WERA05671385001
r: 02835959 p: 48.264 pid: 42057 b: WERA q: 0 st: lt: 11 ean: 4013288179203 sr: WERA 05074792001 sr_no_br: 05074792001 sr_no_br_cl: 05074792001 sr_cl: WERA05074792001 sr_dash: sold: 241.32 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm - 05074792001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 kpn_dash: kpn_clear: 7451 bkpn: WERA 7451 bkpn_clear: WERA 7451 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074792001 sr_ns: WERA05074792001
r: 02141364 p: 6.48 pid: 45741 b: WERA q: 1 st: 1 lt: 1 ean: 4013288031891 sr: WERA 05118006001 sr_no_br: 05118006001 sr_no_br_cl: 05118006001 sr_cl: WERA05118006001 sr_dash: sold: 233.28 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 60 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm - 05118006001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.40 x 2 x 60 mm kts: Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118006001 sr_ns: WERA05118006001
r: 02835969 p: 69.256 pid: 43818 b: WERA q: 0 st: lt: 12 ean: 4013288102959 sr: WERA 05074721001 sr_no_br: 05074721001 sr_no_br_cl: 05074721001 sr_cl: WERA05074721001 sr_dash: sold: 207.768 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 25 in lbs Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 25-55 in lbs Max. tightening torque 55 in lbs Product Range Wera Kraftform n: WERA 7467 Kraftform adjustable pistol grip torque screwdriver (2.05 - 55.0 in. lbs.) with Rapidaptor quick-change holder - 05074721001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with pistol handle Rapidaptor quick-release chuck Rapidaptor technology for rapid bit change Suitable for bits with 1/4" hex head drive Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 25.0 in. lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (25.0-55.0 in. lbs.) and Rapidaptor quick-release chuck, pistol handle, 7467 x 25 in. lbs. x 25-55 in. lbs. kts: Kraftform adjustable pistol grip torque screwdriver (2.05 - 55.0 in. lbs.) with Rapidaptor quick-change holder kpn: 7467 kpn_dash: kpn_clear: 7467 bkpn: WERA 7467 bkpn_clear: WERA 7467 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074721001 sr_ns: WERA05074721001
r: 41071080 p: 29.586 pid: 71781 b: WERA q: 0 st: lt: 13 ean: 4013288003140 sr: WERA 05105656001 sr_no_br: 05105656001 sr_no_br_cl: 05105656001 sr_cl: WERA05105656001 sr_dash: sold: 207.102 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334/355/6 Rack screwdriver set Kraftform Plus laser tip in holder 6-piece - 05105656001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 334/355/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 3x 335 Screwdriver for slotted screws: 0.5x3x80 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus laser tip in holder 6-piece kpn: 334/355/6 Rack kpn_dash: kpn_clear: 3343556Rack bkpn: WERA 334/355/6 Rack bkpn_clear: WERA 3343556Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05105656001 sr_ns: WERA05105656001
r: 02835450 p: 7.44 pid: 41989 b: WERA q: 2 st: 1 lt: 1 ean: 4013288031877 sr: WERA 05118002001 sr_no_br: 05118002001 sr_no_br_cl: 05118002001 sr_cl: WERA05118002001 sr_dash: sold: 200.88 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 1,5 mm Blade length 40 mm Blade thickness 0,23 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm - 05118002001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.23 x 1.5 x 40 mm kts: Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118002001 sr_ns: WERA05118002001
r: 02830312 p: 40.165 pid: 42315 b: WERA q: 0 st: lt: 8 ean: 4013288182388 sr: WERA 05347106001 sr_no_br: 05347106001 sr_no_br_cl: 05347106001 sr_cl: WERA05347106001 sr_dash: sold: 200.825 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 11 Product Range Wera Kraftform n: WERA Kraftform XXL 3 screwdriver set 11-piece - 05347106001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 11-piece all-round screwdriver set. Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially with Lasertip: The tips of the Wera Lasertip screwdrivers are microscopically roughened by laser beams. This rough surface literally bites into the head of the screw. Any unintentional slipping out is therefore a thing of the past. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. For every application the right tool Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head 11-piece screwdriver set for all-round applications. Take it easy tool finder: colour coding according to profile and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Kraftform XXL 3, 11 pieces 2x 932 A Screwdriver for slotted screws: 1x5.5x100 mm, 1.2x7x125 mm 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 2x 335 Screwdriver for slotted screws: 0.8x4x100 mm, 1x5.5x125 mm 2x 368 Screwdriver for square socket head screws: # 1x80 mm, # 2x100 mm 2x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set 11-piece kpn: Kraftform XXL 3 kpn_dash: kpn_clear: KraftformXXL3 bkpn: WERA Kraftform XXL 3 bkpn_clear: WERA KraftformXXL3 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05347106001 sr_ns: WERA05347106001
r: 02830313 p: 6.3 pid: 44539 b: WERA q: 0 st: lt: 11 ean: 4013288100047 sr: WERA 05134002001 sr_no_br: 05134002001 sr_no_br_cl: 05134002001 sr_cl: WERA05134002001 sr_dash: sold: 195.3 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Length 190 mm Width 80 mm Height 80 mm For Screwdriver Color Black Depth 80 mm Product Range Wera Kraftform n: WERA 05134002001 holder for Kraftform Micro screwdrivers, 190 x 80 mm cn: TOOL HOLDER cn2: TOOL HOLDER cn_clear: TOOLHOLDER d: Product description Practical rack for tidy storage of the screwdrivers. Rack for Kraftform Micro screwdrivers Storage for Kraftform Micro screwdrivers Features and benefits ds: dsc: Scope of delivery Rack for Kraftform Micro screwdrivers, 190 x 80 mm kts: holder for Kraftform Micro screwdrivers, 190 x 80 mm kpn: 05134002001 kpn_dash: kpn_clear: 05134002001 bkpn: WERA 05134002001 bkpn_clear: WERA 05134002001 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool holder | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool holder | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05134002001 sr_ns: WERA05134002001
r: 08121648 p: 96.198 pid: 167052 b: WERA q: 0 st: lt: 8 ean: 4013288232557 sr: WERA 05150106001 sr_no_br: 05150106001 sr_no_br_cl: 05150106001 sr_cl: WERA05150106001 sr_dash: sold: 192.396 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Mixed VDE approved No With safety colour code 1000V Product Range Wera Kraftform n: WERA 9715 screwdriver set Kraftform Micro set 1 in foam insert, 24 pieces - 05150106001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet. Equipped with 24 Kraftform Micro screwdrivers. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Kraftform Micro screwdrivers Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting 24-piece Kraftform Micro screwdriver set in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 38 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 9715 Foam insert Kraftform Micro screwdriver set 1, 24 pieces 3x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 5x 2067 TORX® HF Screwdriver with holding function for electronic applications: TX 5x40 mm, TX 6x40 mm, TX 7x60 mm, TX 8x60 mm, TX 10x60 mm 1x 2067 IPR TORX PLUS® Screwdriver for electronic applications: 1 IPR x 40 mm 1x 2072 Kraftform Micro screwdriver for Microstix® screws: m x 40 mm 5x 2054 Screwdriver for hexagon socket screws for electronic applications: 0.7x40 mm, 0.9x40 mm, 1.3x40 mm, 1.5x60 mm, 2x60 mm 6x 2035 Screwdriver for slotted screws for electronic applications: 0.23x1.5x40 mm, 0.35x2.5x40 mm, 0.30x1.8x60 mm, 0.40x2x60 mm, 0.40x2.5x80 mm, 0.50x3x80 mm 2x 2069 Nutdriver for electronic applications: 4x60 mm, 5.5x60 mm 1x 1429 Lifting fork: 1 x 3.5 x 50 mm 1x 9815 Foam insert Kraftform Micro screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set Kraftform Micro set 1 in foam insert, 24 pieces kpn: 9715 kpn_dash: kpn_clear: 9715 bkpn: WERA 9715 bkpn_clear: WERA 9715 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05150106001 sr_ns: WERA05150106001
r: 02105422 p: 47.768 pid: 44424 b: WERA q: 0 st: lt: 13 ean: 4013288102928 sr: WERA 05074716001 sr_no_br: 05074716001 sr_no_br_cl: 05074716001 sr_cl: WERA05074716001 sr_dash: sold: 191.072 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm - 05074716001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7461 x 1.2 Nm x 1.2-3.0 Nm kts: Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm kpn: 7461 kpn_dash: kpn_clear: 7461 bkpn: WERA 7461 bkpn_clear: WERA 7461 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074716001 sr_ns: WERA05074716001
r: 03230325 p: 20.991 pid: 70604 b: WERA q: 0 st: lt: 13 ean: 4013288222381 sr: WERA 05051575001 sr_no_br: 05051575001 sr_no_br_cl: 05051575001 sr_cl: WERA05051575001 sr_dash: sold: 188.919 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 1060 i/1062 i/6 VDE screwdriver set Kraftform VDE 6-piece - 05051575001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Premium Kraftform VDE screwdriver set. Multi-component Kraftform handle for fast and gentle work. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked to find and sort the tools easily. Multi-component Kraftform handle for fast and low-fatigue working Individually tested Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted and Phillips-head screws Phillips-Recess Design 6-piece set Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The multi-component Kraftform handle for quick and low-fatigue working. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1060 i/1062 i/6 Kraftform VDE screwdriver set, 6 pieces 2x 1062 i PH VDE-insulated Kraftform Phillips-head screwdriver: PH 1x80 mm, PH 2x100 mm 4x 1060 i VDE-insulated Kraftform slotted screwdriver: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform VDE 6-piece kpn: 1060 i/1062 i/6 VDE kpn_dash: kpn_clear: 1060i1062i6VDE bkpn: WERA 1060 i/1062 i/6 VDE bkpn_clear: WERA 1060i1062i6VDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051575001 sr_ns: WERA05051575001
r: 03177019 p: 12.231 pid: 31375 b: WERA q: 0 st: lt: 13 ean: 4013288219497 sr: WERA 05030331001 sr_no_br: 05030331001 sr_no_br_cl: 05030331001 sr_cl: WERA05030331001 sr_dash: sold: 183.465 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PL1 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Pentalobe Product Range Wera Kraftform n: WERA 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm - 05030331001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for Pentalobe screws ESD-safe tool thanks to surface resistance of ds: dsc: Scope of delivery 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm kts: Kraftform Micro screwdriver, PL 1.4 x 40 mm kpn: 1573 Pentalobe ESD kpn_dash: kpn_clear: 1573PentalobeESD bkpn: WERA 1573 Pentalobe ESD bkpn_clear: WERA 1573PentalobeESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030331001 sr_ns: WERA05030331001
r: 02835062 p: 181.652 pid: 41992 b: WERA q: 0 st: lt: 12 ean: 4013288179043 sr: WERA 05074802001 sr_no_br: 05074802001 sr_no_br_cl: 05074802001 sr_cl: WERA05074802001 sr_dash: sold: 181.652 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,02 Nm Bit holder size 4 mm Bit holder type Halfmoon/HIOS ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,02-0,06 Nm Max. tightening torque 0,06 Nm Product Range Wera Kraftform n: WERA 1430 ESD Kraftform adjustable torque screwdriver with quick change holder 0.02-0.06 Nm - 05074802001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Torque tool with adjustable torque of 2.0 to 6.0 cNm (accuracy ± 10%). Compact handle/interchangeable blade system for torque controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque controlled jobs on electrostatically-susceptible components. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and 4 mm HIOS drive (Wera series 21). Tamperproof. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. Electrical surface resistance of<= 10 9 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Handle/Interchangeable blade system for rapid blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bits suitable for manual as well as power tool operations with electric screwdrivers (e.g. HIOS, Delvo, Sehan). Applications for example on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Accuracy ± 10%. Numerical torque value scale, audible excess-load signal Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits They can be adjusted by hand to the corresponding scale value. Also available in ESD version (also with take-up for HIOS/Halfmoon bits) and with Kraftform Micro handle. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. The fast-turning zone just below the rotating cap allows rapid spinning. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. ds: dsc: Scope of delivery 1430 ESD Kraftform Micro adjustable torque screwdrivers (0.02-0.11 Nm) with quick-release chuck, 1430 ESD x 0.02-0.06 Nm kts: Kraftform adjustable torque screwdriver with quick change holder 0.02-0.06 Nm kpn: 1430 ESD kpn_dash: kpn_clear: 1430ESD bkpn: WERA 1430 ESD bkpn_clear: WERA 1430ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074802001 sr_ns: WERA05074802001
r: 02835063 p: 181.652 pid: 41599 b: WERA q: 0 st: lt: 12 ean: 4013288179104 sr: WERA 05074804001 sr_no_br: 05074804001 sr_no_br_cl: 05074804001 sr_cl: WERA05074804001 sr_dash: sold: 181.652 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,05 Nm Bit holder size 4 mm Bit holder type Halfmoon/HIOS ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,05-0,11 Nm Max. tightening torque 0,11 Nm Product Range Wera Kraftform n: WERA 1431 ESD Kraftform adjustable torque screwdriver with quick change holder 0.05-0.11 Nm - 05074804001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Accuracy ± 10%. Numerical torque value scale, audible excess-load signal Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits They can be adjusted by hand to the corresponding scale value. Also available in ESD version (also with take-up for HIOS/Halfmoon bits) and with Kraftform Micro handle. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. The fast-turning zone just below the rotating cap allows rapid spinning. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. ds: dsc: Scope of delivery 1430 ESD Kraftform Micro adjustable torque screwdrivers (0.02-0.11 Nm) with quick-release chuck, 1431 ESD x 0.05-0.11 Nm kts: Kraftform adjustable torque screwdriver with quick change holder 0.05-0.11 Nm kpn: 1431 ESD kpn_dash: kpn_clear: 1431ESD bkpn: WERA 1431 ESD bkpn_clear: WERA 1431ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074804001 sr_ns: WERA05074804001
