r: 41071085 p: 36.198 pid: 71785 b: WERA q: 0 st: lt: 10 ean: 4013288018137 sr: WERA 05018287001 sr_no_br: 05018287001 sr_no_br_cl: 05018287001 sr_cl: WERA05018287001 sr_dash: sold: 651.564 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 932/918/6 Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece - 05018287001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Impact cap and bolster for the transfer of higher torque Hexagonal blade extending through the handle The Wera Black Point tip offers an exact fit and optimum corrosion protection Storage rack for wall-mounting Application Slotted and Pozidriv screws Content 6-piece set and rack in display carton Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932/918/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 2x 918 SPZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 4x 932 A Screwdriver for slotted screws: 0.6x3.5x80 mm, 0.8x4.5x90 mm, 1x5.5x100 mm, 1.2x7x125 mm kts: Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece kpn: 932/918/6 kpn_dash: kpn_clear: 9329186 bkpn: WERA 932/918/6 bkpn_clear: WERA 9329186 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05018287001 sr_ns: WERA05018287001
r: 02835136 p: 123.801 pid: 41990 b: WERA q: 0 st: lt: 12 ean: 4013288168351 sr: WERA 05074800001 sr_no_br: 05074800001 sr_no_br_cl: 05074800001 sr_cl: WERA05074800001 sr_dash: sold: 619.005 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,02 Nm Bit holder size 4 mm Bit holder type Halfmoon/HIOS ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,02-0,06 Nm Max. tightening torque 0,06 Nm Product Range Wera Kraftform n: WERA 1460 ESD Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.035 Nm - 05074800001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque is reached. Repeatability is 100% guaranteed. Unlimited manual loosening torque. Electrical surface resistance<= 10 9 ohms for safe protection against electrostatic charge. Manufactured as per DIN EN 61340-5-1. Handle/interchangeable blades system for rapid blade changes. Kraftform Micro handle with rotating cap and free-turning zone for rapid turning, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones ensures the transmission of high tightening and loosening torques. Precision zone directly above the blade for the correct rotation angle for adjustment work. Rapid bit fixing: Simply push the bit into the holder for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove the bit. Free-running actuating sleeve for easy handling of the tool during the screwdriving process. Bits suitable for manual and machine operated screwdriving connections with electric screwdrivers (including HIOS, Delvo, Sehan). Use with e.g. smartphones, mobile phones, cameras, electronic devices, in dental laboratories and dental surgeries. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for the take-up of bits with 4 mm halfmoon drive and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0,035 Nm, 0,05 Nm Accuracy ± 10%. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery 1460 ESD Kraftform Micro torque screwdrivers, with factory pre-set value (0.02-0.11 Nm) and quick-release chuck, 1460 ESD x 0.035 Nm kts: Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.035 Nm kpn: 1460 ESD kpn_dash: kpn_clear: 1460ESD bkpn: WERA 1460 ESD bkpn_clear: WERA 1460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074800001 sr_ns: WERA05074800001
r: 41071265 p: 6.3 pid: 70508 b: WERA q: 0 st: lt: 9 ean: 4013288100030 sr: WERA 05134001001 sr_no_br: 05134001001 sr_no_br_cl: 05134001001 sr_cl: WERA05134001001 sr_dash: sold: 585.9 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Length 190 mm Width 50 mm Height 50 mm For Screwdriver Color Black Depth 50 mm Product Range Wera Kraftform n: WERA 05134001001 holder for Kraftform screwdrivers, 190 x 50 mm cn: TOOL HOLDER cn2: TOOL HOLDER cn_clear: TOOLHOLDER d: Product description Practical rack for wall mounting. This provides tidy storage for the screwdrivers! Rack for Kraftform screwdrivers Screwdriver storage, wall mounting So the screwdrivers are always to hand Features and benefits ds: dsc: Scope of delivery Rack for Kraftform screwdrivers, 190 x 50 mm kts: holder for Kraftform screwdrivers, 190 x 50 mm kpn: 05134001001 kpn_dash: kpn_clear: 05134001001 bkpn: WERA 05134001001 bkpn_clear: WERA 05134001001 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool holder | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool holder | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05134001001 sr_ns: WERA05134001001
r: 03262236 p: 61.818 pid: 71942 b: WERA q: 0 st: lt: 10 ean: 4013288221698 sr: WERA 05018100001 sr_no_br: 05018100001 sr_no_br_cl: 05018100001 sr_cl: WERA05018100001 sr_dash: sold: 556.362 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Tool holder*** 1/4 inch Max. tightening torque 25 Nm Length 163,5 mm Tool holder size 1/4" Tool holder type Internal hexagon Product Range Wera Kraftform n: WERA 921 Kraftform Plus impact screwdriver- 900 series, 1/4" x 163.5 mm - 05018100001 cn: IMPACT SCREWDRIVER cn2: IMPACT SCREWDRIVER cn_clear: IMPACTSCREWDRIVER d: Product description The impact screwdriver 921 combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The impact wrench function offers a loosening moment of up to 25 Nm. The robust bit holder allows the mounting of different specialised bits for various screw profiles. The pound-thru blade ensures complete power transmission (zero loss). The impact wrench function and screwdriver function can be switched as required. For loosening stubborn screw connections Manual impact wrench function can be switched on and off Hammer blow impulse is converted into a rotary movement with a loosening torque of approx. 25 Nm - without loss via a pound-thru blade Reversible functions: impact wrench and screwdriver Combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade Application Suitable for impact wrench bits with 1/4" external hexagon tip Design Switching function impact wrench/screwdriver; pound-thru blade; 1/4" hexagonal socket mounting, magnetic Handle Kraftform with anti-roll protection, multi-component Features and benefits The 921 impact screwdriver combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The 921 impact screwdriver combines the advantages of interchangeable blade sets, chiseldrivers and manual impact wrenches. The manual impact wrench function can be switched on if required to loosen even stubborn screw connections. With the impact wrench function switched on, the hammer blow impulse is converted into a rotary movement with a loosening moment of up to 25 Nm. Power transmission without loss via a pound-thru blade. When the impact wrench function is deactivated, the hexagon bolster can be operated with a size 13 spanner for greater power transmission. The robust bit mounting is suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. The interchangeable blade system means low weight, reduced space requirement and high flexibility for the user. ds: dsc: Scope of delivery 921 Kraftform Plus impact screwdriver - series 900, 1/4" x 163.5 mm kts: Kraftform Plus impact screwdriver- 900 series, 1/4" x 163.5 mm kpn: 921 kpn_dash: kpn_clear: 921 bkpn: WERA 921 bkpn_clear: WERA 921 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Impact screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera impact screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05018100001 sr_ns: WERA05018100001
r: 02100832 p: 109.421 pid: 44140 b: WERA q: 0 st: lt: 9 ean: 4013288119308 sr: WERA 05074705001 sr_no_br: 05074705001 sr_no_br_cl: 05074705001 sr_cl: WERA05074705001 sr_dash: sold: 547.105 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4-8,8 Nm Max. tightening torque 8,8 Nm Product Range Wera Kraftform n: WERA 7443 Kraftform Pistol grip adjustable torque screwdriver (3.0 - 8.8 Nm) with Rapidaptor quick change holder 4.0-8.8 Nm - 05074705001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transfer, multi-component for high working speeds and particularly ergonomic screwdriving. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (3.0-8.8 Nm) with Rapidaptor quick-release chuck, 7443 x 4.0-8.8 Nm kts: Kraftform Pistol grip adjustable torque screwdriver (3.0 - 8.8 Nm) with Rapidaptor quick change holder 4.0-8.8 Nm kpn: 7443 kpn_dash: kpn_clear: 7443 bkpn: WERA 7443 bkpn_clear: WERA 7443 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074705001 sr_ns: WERA05074705001
r: 02835983 p: 263.305 pid: 42161 b: WERA q: 0 st: lt: 12 ean: 4013288161383 sr: WERA 05350451001 sr_no_br: 05350451001 sr_no_br_cl: 05350451001 sr_cl: WERA05350451001 sr_dash: sold: 526.61 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Adjustable torque range 2,5-55 Nm Min. tightening torque 2,5 Nm Max. tightening torque 55 Nm Supplied in Case Product Range Wera Kraftform n: WERA 7445/46/47 Kraftform torque screwdriver set 2.5-55.0 in.lbs. 27-piece - 05350451001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description Wera torque screwdriver set. Two high precision torque screwdrivers with variable torque settings. One torque screwdriver with Kraftform pistol handle for the transfer of especially high torque; multi-component for high working speeds and particularly ergonomic screwdriving. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes a bit assortment in a high quality and stable plastic case. Kraftform torque screwdriver set Suitable for bits with 1/4" hex head drive With Hex-Plus, TORX® and TORX PLUS® bits Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. ds: dsc: Scope of delivery 7445/46/47 Kraftform torque screwdriver set 2.5-55.0 in.lbs., 27 pieces 2x Series 7400 Kraftform adjustable torque screwdrivers (2.5-29.0 in. lbs.) with Rapidaptor quick-release chuck: 7445x2.5-11.5 in. lbs., 7446x11-29 in. lbs. 1x Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (25.0-55.0 in. lbs.) with Rapidaptor quick-release chuck: 7447 x 25-55 in. lbs. 9x 867/1 TZ TORX® bits: TX 6x25 mm, TX 7x25 mm, TX 8x25 mm, TX 9x25 mm, TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 9x 867/1 IP TORX PLUS® bits: 6 IPx25 mm, 7 IPx25 mm, 8 IPx25 mm, 9 IPx25 mm, 10 IPx25 mm, 15 IPx25 mm, 20 IPx25 mm, 25 IPx25 mm, 30 IPx25 mm 6x 840/1 Z bits: 2x25 mm, 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm kts: Kraftform torque screwdriver set 2.5-55.0 in.lbs. 27-piece kpn: 7445/46/47 kpn_dash: kpn_clear: 74454647 bkpn: WERA 7445/46/47 bkpn_clear: WERA 74454647 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05350451001 sr_ns: WERA05350451001
r: 08103766 p: 73.388 pid: 70371 b: WERA q: 0 st: lt: 10 ean: 4013288228321 sr: WERA 05075850001 sr_no_br: 05075850001 sr_no_br_cl: 05075850001 sr_cl: WERA05075850001 sr_dash: sold: 513.716 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Max. tightening torque 6 Nm Connection size (Handle) 1/4" Supplied in Case Quantity per set 7 Product Range Wera Kraftform n: WERA 7515/7 Kraftform Safe-Torque Speed Bicycle 1 tool set 7-piece - 05075850001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description 7-piece tool set. For professional screwdriving/professional fine adjustment AND for torque-controlled screwdriving. Secure slip-over torque mechanism with quick clockwise/counterclockwise setting and five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited loosening and tightening moments. Quick-release holder for high robustness. Ideal for bike operations. Suitable for bits with 1/4" external hexagon drive. 6 tough bits (50 mm length), profile and size of the bits are easily recognized thanks to the Wera Take it easy Tool finder with its colour codes and labels. Bicycle tool set Torque screwdriver with quick torque adjustment Easy and quick torque setting Fixed position (Torque Lock) for unlimited tightening and loosening moments Secure slip-over torque function for clockwise/anti-clockwise torque-control 7-piece setFolding pouch with one torque screwdriver 7515 with easy quick torque setting and 6 tough bits (50 mm length), with Wera Take it easy Tool finder: size stamping and colour coding by output to help you find the required bit easily Features and benefits Torque screwdriver with quick torque adjustment Five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Rapid setting of the selectable tightening torques. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Storage and transport in a robust and compact textile roll pouch, so the tool is always close at hand. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 7515/7 Kraftform Safe-Torque Speed Bicycle 1, 7 pieces 1x 7515 Kraftform Safe-Torque Speed Torque screwdriver, 2-6 Nm: 1/4" x 2.0 Nm x 3.0 Nm x 4.0 Nm x 5.0 Nm x 6.0 Nm x 147.5 mm 2x 867/4 BTZ TORX® bits: TX 10x50 mm, TX 25x50 mm 4x 840/4 BTZ bits: 2.5x50 mm, 3x50 mm, 4x50 mm, 5x50 mm kts: tool set 7-piece kpn: 7515/7 Kraftform Safe-Torque Speed Bicycle 1 kpn_dash: 7515/7 Kraftform Safe kpn_clear: 75157KraftformSafeTorqueSpeedBicycle1 bkpn: WERA 7515/7 Kraftform Safe-Torque Speed Bicycle 1 bkpn_clear: WERA 75157KraftformSafeTorqueSpeedBicycle1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075850001 sr_ns: WERA05075850001
r: 03226449 p: 26.611 pid: 71409 b: WERA q: 0 st: lt: 8 ean: 4013288120991 sr: WERA 05347735002 sr_no_br: 05347735002 sr_no_br_cl: 05347735002 sr_cl: WERA05347735002 sr_dash: sold: 505.609 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 3 Product Range Wera Kraftform n: WERA 335/350/355/3 screwdriver set Kraftform Plus with 300 mm long blades 3-piece - 05347735002 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 3-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Take it easy Tool Finder with colour coding according to sizes. Screwdrivers for slotted and cross-recess Phillips and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Extra-long blade for low-lying working situations. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and Pozidriv screws Content 3-piece set Features and benefits Extra-long blade for low-lying working situations. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 335/350/355/3 Screwdriver set Kraftform Plus 300 mm-long blades, 3 pieces 1x 335 Screwdriver for slotted screws: 1 x 5.5 x 300 mm 1x 350 PH Screwdriver for Phillips screws: PH 2 x 300 mm 1x 355 PZ Screwdriver for Pozidriv screws: PZ 2 x 300 mm kts: screwdriver set Kraftform Plus with 300 mm long blades 3-piece kpn: 335/350/355/3 kpn_dash: kpn_clear: 3353503553 bkpn: WERA 335/350/355/3 bkpn_clear: WERA 3353503553 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05347735002 sr_ns: WERA05347735002
r: 02951222 p: 60.991 pid: 31706 b: WERA q: 0 st: lt: 12 ean: 4013288187833 sr: WERA 05004313001 sr_no_br: 05004313001 sr_no_br_cl: 05004313001 sr_cl: WERA05004313001 sr_dash: sold: 487.928 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 11 Product Range Wera Kraftform n: WERA Kraftform 2Go 300 screwdriver set 11-piece - 05004313001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 11 Kraftform screwdrivers; with Take it easy Tool finder; in the Wera 2go 4 quiver; comes with an adjustable partition element for individual sectioning. Lasertip tips for more secure fit in the screw head Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for docking with the Wera 2go system. Take it easy tool finder: colour coding according to profile and size 11 Kraftform screwdrivers, Series 300 for cross recess screws Phillips and Pozidriv, TORX® and slotted screws. Take it easy tool finder: colour coding according to profile and size stamp.1 dimensionally stable and robust Tool Quiver, equipped with handle for the storage and transport of tools; high resistance against cuts and stabs; comes with hook and loop fastener zone for docking with the Wera 2go system and includes 1 variably adjustable hook and loop fastener partition for a division into as many as 5 sections. Features and benefits Wera 2go 4 Tool Quiver The large set-down area improves the stability of the Tool Quiver. Its large handle means that the quiver can be easily transported or simply hung up at the workplace. The robust and dimensionally stable material is very resistant against cuts and stabs. The tools carried are protected against damage and moisture. This enhances the service life of the tool box. Thanks to its hook and loop fastener zone, the Tool Quiver can be docked with the Wera 2go 1 tool carrier and with the Wera 2go 2 tool container. The variably adjustable hook and loop fastener partition in the Tool Quiver ensures neat and tidy arrangement of the tools. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Colour coding according to profile and size stamp. This enables faster and more reliable selection of the correct tool from the tool case. ds: dsc: Scope of delivery Kraftform 2go 300, 11 pieces 1x Wera 2go 4 Tool Quiver: 165 x 105 mm 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 5x 367 Screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm 2x 334 SK Screwdriver for slotted screws: 0.8x4.5x90 mm, 1.2x7x125 mm kts: screwdriver set 11-piece kpn: Kraftform 2Go 300 kpn_dash: kpn_clear: Kraftform2Go300 bkpn: WERA Kraftform 2Go 300 bkpn_clear: WERA Kraftform2Go300 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05004313001 sr_ns: WERA05004313001
r: 02830888 p: 29.586 pid: 42447 b: WERA q: 0 st: lt: 12 ean: 4013288028891 sr: WERA 05028062001 sr_no_br: 05028062001 sr_no_br_cl: 05028062001 sr_cl: WERA05028062001 sr_dash: sold: 473.376 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 367/6 TORX screwdriver set Kraftform Plus in holder 6-piece - 05028062001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Screwdriver for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® Content 6-piece set with Take it easy tool finder: colour coding according to profile and size stamp and rack in display carton. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367/6 TORX® Screwdriver set Kraftform Plus and rack, 6 pieces 6x 367 Screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm, TX 40x130 mm kts: screwdriver set Kraftform Plus in holder 6-piece kpn: 367/6 TORX kpn_dash: kpn_clear: 3676TORX bkpn: WERA 367/6 TORX bkpn_clear: WERA 3676TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028062001 sr_ns: WERA05028062001
r: 03226637 p: 26.28 pid: 71461 b: WERA q: 0 st: lt: 8 ean: 4013288214317 sr: WERA 05006470001 sr_no_br: 05006470001 sr_no_br_cl: 05006470001 sr_cl: WERA05006470001 sr_dash: sold: 473.04 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Pozidriv/Slotted VDE approved Yes With safety colour code 1000V No Quantity per set 2 Product Range Wera Kraftform n: WERA 165 iS PZ/S 1 + 2 screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece - 05006470001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Pozidriv* particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Kraftform: The security screwdriver. With reduced blade diameter Application Combination profile Pozidriv/slotted Design 2-piece set in a box Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S # 1 + 2 Screwdriver set Kraftform Plus series 100. With reduced blade diameter, 2 pieces 2x 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted): # 1x80 mm, # 2x100 mm kts: screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece kpn: 165 iS PZ/S # 1 + 2 kpn_dash: kpn_clear: 165iSPZS12 bkpn: WERA 165 iS PZ/S # 1 + 2 bkpn_clear: WERA 165iSPZS12 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006470001 sr_ns: WERA05006470001
r: 41071188 p: 32.892 pid: 72591 b: WERA q: 0 st: lt: 16 ean: 4013288111418 sr: WERA 05007680001 sr_no_br: 05007680001 sr_no_br_cl: 05007680001 sr_cl: WERA05007680001 sr_dash: sold: 460.488 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334 SK/6 screwdriver set Kraftform Plus Lasertip in holder, 6-piece - 05007680001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and the integrated bolster. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Including a practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Lasertip hexagon blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 334 SK/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 350 SK PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 334 SK Screwdriver for slotted screws: 0.6x3.5x75 mm, 0.8x4x90 mm, 1x5.5x100 mm, 1.2x6.5x125 mm kts: screwdriver set Kraftform Plus Lasertip in holder, 6-piece kpn: 334 SK/6 kpn_dash: kpn_clear: 334SK6 bkpn: WERA 334 SK/6 bkpn_clear: WERA 334SK6 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007680001 sr_ns: WERA05007680001
r: 02831671 p: 36.198 pid: 44655 b: WERA q: 0 st: lt: 11 ean: 4013288138378 sr: WERA 05028074001 sr_no_br: 05028074001 sr_no_br_cl: 05028074001 sr_cl: WERA05028074001 sr_dash: sold: 434.376 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Quantity per set 4 Product Range Wera Kraftform n: WERA 367/4 TORX HF Kraftform Plus screwdriver set extra long with holding function with 300 mm long blades 4-piece - 05028074001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 4-piece screwdriver set by Wera. Comes with an extra-long blade for low-lying, difficult-to-access working situations. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function and extra-long 300 mm blade Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications, extra long (300 mm) blade Content 4-piece set Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Extra-long blade for low-lying working situations. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367/4 TORX® HF Kraftform Plus Screwdriver set with holding function and 300 mm-long blades, 4 pieces 4x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 20x300 mm, TX 25x300 mm, TX 27x300 mm, TX 30x300 mm kts: Kraftform Plus screwdriver set extra long with holding function with 300 mm long blades 4-piece kpn: 367/4 TORX HF kpn_dash: kpn_clear: 3674TORXHF bkpn: WERA 367/4 TORX HF bkpn_clear: WERA 3674TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028074001 sr_ns: WERA05028074001
r: 08131835 p: 64.628 pid: 173622 b: WERA q: 0 st: lt: 21 ean: 4013288233585 sr: WERA 05075876001 sr_no_br: 05075876001 sr_no_br_cl: 05075876001 sr_cl: WERA05075876001 sr_dash: sold: 387.768 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,4 Nm Max. tightening torque 4 Nm ESD No VDE approved Yes With safety colour code 1000V No Product Range Wera Kraftform n: WERA 7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4-4.0 Nm - 05075876001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description VDE-insulated torque wrench handle with 9 mm hexagon mounting; solely for Wera Kraftform Kompakt VDE blades. For professional screwdriving/fine adjustment AND for torque operated screwdriving. Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation. With five selectable tightening torques clockwise/counterclockwise (2.4; 2.8; 3.2; 3.6; 4.0 Nm), which can be set very quickly. One fixed position (Torque Lock) for unlimited loosening and tightening moments. With fast-rotating sleeve for easy wielding of the tool whilst screwdriving. VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) Speed: Extremely fast setting of desired torque values Safe: Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation Torque Lock function: for high tightening and loosening moments without torque With fast-rotating sleeve and mounting for Wera VDE interchangeable blades Application Solely for Wera VDE blades Design 9 mm hexagon mounting. Five selectable maximum tightening torques. One fixed position (Torque Lock) for unlimited loosening and tightening moments. Precision: ±10 %. Digital torque value display. Reliable slip-over mechanism when the set torque is reached. Handle Kraftform, multi-component Features and benefits VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The Safe-Torque Speed VDE bladeholding screwdriver is suitable solely for Wera VDE blades. Five selectable tightening torques (2.4; 2.8; 3.2; 3.6; 4.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Quick setting of the selectable tightening torque values. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The slip-over torque mechanism for clockwise/counterclockwise torque operation prevents unintentional application of excessive torque. ds: dsc: Scope of delivery 7516 VDE Kraftform Safe-Torque Speed Torque screwdriver, 2.4-4.0 Nm, 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm kts: VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4-4.0 Nm kpn: 7516 kpn_dash: kpn_clear: 7516 bkpn: WERA 7516 bkpn_clear: WERA 7516 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075876001 sr_ns: WERA05075876001
r: 08103773 p: 31.239 pid: 70209 b: WERA q: 0 st: lt: 14 ean: 4013288229700 sr: WERA 05057490001 sr_no_br: 05057490001 sr_no_br_cl: 05057490001 sr_cl: WERA05057490001 sr_dash: sold: 374.868 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Bit holder size 9 mm Bit holder type Internal hexagon VDE approved Yes With safety colour code 1000V No ESD No Non-sparking No Product Range Wera Kraftform n: WERA 837 i RA Kraftform holder with ratchet function 9 x 115 mm - 05057490001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description Bitholding screwdriver for Wera Kraftform Kompakt VDE blades with ratchet with fine toothing integrated in the handle (40 teeth/return angle 9°). The ratchet accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. The handle/blade system allows for lightning-fast change of the required blade and thus a wide range of applications. Kraftform Kompakt VDE bladeholding screwdriver with ratchet functionality The integrated ratchet with fine toothing ensures fast and safe working High working speed: The ratchet can also be used to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 Kraftform Plus handle for comfortable ergonomic work Application Solely for Wera VDE blades Design Ratchet with fine toothing integrated in the handle (40 teeth, return angle 9°) Handle Kraftform with anti-roll protection, multi-component Features and benefits The integrated ratchet with fine toothing (40 teeth and a return angle of 9°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 837 i RA Kraftform blade-holding handle with ratchet functionality, 9 x 115 mm kts: Kraftform holder with ratchet function 9 x 115 mm kpn: 837 i RA kpn_dash: kpn_clear: 837iRA bkpn: WERA 837 i RA bkpn_clear: WERA 837iRA c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05057490001 sr_ns: WERA05057490001
r: 41071272 p: 37.024 pid: 70509 b: WERA q: 0 st: lt: 10 ean: 4013288100764 sr: WERA 05028059001 sr_no_br: 05028059001 sr_no_br_cl: 05028059001 sr_cl: WERA05028059001 sr_dash: sold: 370.24 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 367/6 TORX HF Kraftform Plus screwdriver set with holding function in holder 6-piece - 05028059001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 367/6 TORX® HF Kraftform Plus Screwdriver set with holding function and rack, 6 pieces 6x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm, TX 40x130 mm kts: Kraftform Plus screwdriver set with holding function in holder 6-piece kpn: 367/6 TORX HF kpn_dash: kpn_clear: 3676TORXHF bkpn: WERA 367/6 TORX HF bkpn_clear: WERA 3676TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028059001 sr_ns: WERA05028059001
r: 02836000 p: 115.537 pid: 43822 b: WERA q: 0 st: lt: 12 ean: 4013288179036 sr: WERA 05074786001 sr_no_br: 05074786001 sr_no_br_cl: 05074786001 sr_cl: WERA05074786001 sr_dash: sold: 346.611 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7435 ESD Kraftform adjustable torque screwdriver with quick change holder 0.10-0.34 Nm - 05074786001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Adjustable Kraftform ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Simple setting of the required torque by hand. Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Wera's torque tools offer torque-controlled screw tightening so as to avoid damage to the screw or workpiece and to ensure the integrity of the screw connection. This makes work-intensive drilling-out of screws and unproductive downtimes a thing of the past. It is also important whenever repeat accuracy is required. They come with an ergonomic Kraftform handle and have a distinctly audible and perceptible click signal whenever the required torque value is reached. No time-consuming blade changes; instead of special blades, conventional bits conforming to C 6,3 and E 6,3 or even 1/4" sockets can be used. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-1.0 Nm), 7435 ESD x 0.10-0.34 Nm kts: Kraftform adjustable torque screwdriver with quick change holder 0.10-0.34 Nm kpn: 7435 ESD kpn_dash: kpn_clear: 7435ESD bkpn: WERA 7435 ESD bkpn_clear: WERA 7435ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074786001 sr_ns: WERA05074786001
r: 03230328 p: 21.818 pid: 70168 b: WERA q: 0 st: lt: 16 ean: 4013288222374 sr: WERA 05051576001 sr_no_br: 05051576001 sr_no_br_cl: 05051576001 sr_cl: WERA05051576001 sr_dash: sold: 327.27 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Supplied in Cardboard box Quantity per set 6 Product Range Wera Kraftform n: WERA 1060 i/1065 i/6 VDE screwdriver set Kraftform VDE 6-piece - 05051576001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Premium Kraftform VDE screwdriver set. Multi-component Kraftform handle for fast and gentle work. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked to find and sort the tools easily. Multi-component Kraftform handle for fast and low-fatigue working Individually tested Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted and Pozidriv screws Design 6-piece set in a box Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The multi-component Kraftform handle for quick and low-fatigue working. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1060 i/1065 i/6 Kraftform VDE screwdriver set, 6 pieces 2x 1065 i PZ VDE-insulated Kraftform Phillips-head screwdriver: PZ 1x80 mm, PZ 2x100 mm 4x 1060 i VDE-insulated Kraftform slotted screwdriver: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform VDE 6-piece kpn: 1060 i/1065 i/6 VDE kpn_dash: kpn_clear: 1060i1065i6VDE bkpn: WERA 1060 i/1065 i/6 VDE bkpn_clear: WERA 1060i1065i6VDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051576001 sr_ns: WERA05051576001
r: 08103831 p: 18.14 pid: 70262 b: WERA q: 0 st: lt: 10 ean: 4013288230690 sr: WERA 05136414001 sr_no_br: 05136414001 sr_no_br_cl: 05136414001 sr_cl: WERA05136414001 sr_dash: sold: 326.52 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Product Range Wera Kraftform n: WERA 9611 magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm - 05136414001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty magnetic rail. For up to 9 Kraftform screwdrivers. The clips ensure perfect hold und easy access to the tools. With its strong magnet, the rail holds securely to metal surfaces. The rail can also be bolted to the wall. The clips hold the tools perfectly With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. One magnetic rail, empty. For up to 9 Kraftform screwdrivers. The rail allows temporary attachment to metallic surfaces and, thanks to the strong terminals, ensures reliable clamping and easy access to the tools. The rail can also be bolted to the wall. Features and benefits The high-quality aluminium magnetic rail offers space for up to 9 Kraftform screwdrivers. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. ds: dsc: Scope of delivery 9611 Magnetic rail for up to 9 Kraftform screwdrivers, empty, 30 x 400 mm kts: magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm kpn: 9611 kpn_dash: kpn_clear: 9611 bkpn: WERA 9611 bkpn_clear: WERA 9611 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05136414001 sr_ns: WERA05136414001
r: 02834387 p: 20.33 pid: 19073 b: WERA q: 0 st: lt: 8 ean: 4013288168610 sr: WERA 05300004001 sr_no_br: 05300004001 sr_no_br_cl: 05300004001 sr_cl: WERA05300004001 sr_dash: sold: 325.28 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Bit holder size 4 mm Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD Yes Non-sparking No Product Range Wera Kraftform n: WERA 1013 Kraftform Micro ESD bit holder, 97 mm - 05300004001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description ESD-safe Wera tool. The Kraftform Micro ESD holder for dependable protection against electrostatic energy and associated damage. Electrical surface resistance of<= 10 9 Ohm. Ergonomic Kraftform handle for pleasant and low-fatigue working. Black anti-roll feature prevents any bothersome rolling away at the workplace. Suitable for the take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive. Ideal for applications on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Kraftform Micro ESD bit holder ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle with anti-roll feature and rotating cap Suitable for take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits When doing screwdriving jobs on electronic components (like e.g. smartphones and tablet PCs), there should be no electrostatic discharge as this could cause malfunctions and a complete failure. Therefore, tools that are secure against electrostatic discharge are indispensable. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. ds: dsc: Scope of delivery 1013 Kraftform Micro ESD Bitholding screwdriver, 97 mm kts: bit holder, 97 mm kpn: 1013 Kraftform Micro ESD kpn_dash: kpn_clear: 1013KraftformMicroESD bkpn: WERA 1013 Kraftform Micro ESD bkpn_clear: WERA 1013KraftformMicroESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05300004001 sr_ns: WERA05300004001
