r: 02680402 p: 26.115 pid: 45919 b: WERA q: 6 st: 1 lt: 1 ean: 4013288160072 sr: WERA 05133356001 sr_no_br: 05133356001 sr_no_br_cl: 05133356001 sr_cl: WERA05133356001 sr_dash: sold: 1566.9 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved Yes With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 167 i/6 screwdriver set Kraftform Plus series 100, 6-piece - 05133356001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece Wera VDE screwdriver set with Multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individually tested in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Black Point tip for enhanced corrosion protection and an exact fit Kraftform: The safety screwdriver. Take it easy tool finder: colour coding according to profile and size stamp. Application TORX® socket screws Content 6-piece set Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. ds: dsc: Scope of delivery 167 i/6 Screwdriver set Kraftform Plus Series 100, 6 pieces 6x 167 i VDE Insulated screwdriver for TORX® screws: TX 9x80 mm, TX 10x80 mm, TX 15x80 mm, TX 20x80 mm, TX 25x100 mm, TX 8x80 mm kts: screwdriver set Kraftform Plus series 100, 6-piece kpn: 167 i/6 kpn_dash: kpn_clear: 167i6 bkpn: WERA 167 i/6 bkpn_clear: WERA 167i6 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05133356001 sr_ns: WERA05133356001
r: 02140740 p: 62.644 pid: 45736 b: WERA q: 0 st: lt: 12 ean: 4013288100641 sr: WERA 05074700001 sr_no_br: 05074700001 sr_no_br_cl: 05074700001 sr_cl: WERA05074700001 sr_dash: sold: 1566.1 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7440 Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 0.3-1.2 Nm - 05074700001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7440 x 0.3-1.2 Nm kts: Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 0.3-1.2 Nm kpn: 7440 kpn_dash: kpn_clear: 7440 bkpn: WERA 7440 bkpn_clear: WERA 7440 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074700001 sr_ns: WERA05074700001
r: 02953293 p: 111.404 pid: 31161 b: WERA q: 0 st: lt: 8 ean: 4013288204387 sr: WERA 05136026001 sr_no_br: 05136026001 sr_no_br_cl: 05136026001 sr_cl: WERA05136026001 sr_dash: sold: 1559.656 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt SH 2 plumbing/heating tool kit 15-piece - 05136026001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. With 2 Joker Switch ratcheting combination wrenches, VDE handle with 4 extra-slim blades, voltage tester, 4 L-keys with thermoplastic sleeve, chiseldriver and 2 Kraftform Plus nutspinners with hollow shaft. The details: 2 Joker Switch ratcheting combination wrenches with special retaining plate to prevent slipping/loss of the screw and more torque transfer; one Kraftform 817 VDE bladeholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy tool finder with colour coding by profile and laser-engraved size indication; for safe working at up to 1000 volts (iS with reduced blade diameter and integrated protective insulation for reaching and operating low-lying screw and spring elements); 1 single-pole phase tester 247; 4 L-keys with Hex-Plus profile to prevent rounding out screws; 1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench nutspinners 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws. Including tools with Take it easy tool finder with colour coding in accordance to profiles and size stamping - for fast and easy tool selection. 15 screwdriving tools for sanitary or heating applications in compact and robust Wera textile box JOKER combination ratcheting wrench with special holding plate against slipping/loss of the screw VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Kraftform Chiseldriver with hex blade extending through handle and integrated impact cap 15-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility.1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench screwdrivers 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws; One Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy toolfinder with colour coding by profile and laser-engraved size indication; with reduced blade diameter and integrated protective insulation, so low-lying screws can be accessed, individually tested as per IEC 60900; 1 single-pole phase tester 247, 2 Joker Switch ratcheting combination wrenches with holding function for nuts and bolts, protecting against slippage, double hexagon geometry and extremely hard tips on the metal plate to protect against slippage at high torques, with a small return angle of 30°, switch lever for a comfortable direction change, ring end angled at 15° from the handle; 4 L-keys with Hex-Plus profile (prevents the rounding of hexagon socket screws), with holding function for hexagon socket screws, hexagonal ball-end on the long arm, BlackLaser surface, plastic sleeve, all L-keys are easily identified by their colour coding and size marking. Features and benefits Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. Compact tool set with the 15 most important screwdriving tools for plumbing and heating applications. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. ds: dsc: Scope of delivery Kraftform Kompakt SH 2 PlumbKit, 15 pieces 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm 1x 932 A Screwdriver for slotted screws: 1.2 x 7 x 125 mm 2x 6001 Joker Switch Ratcheting combination wrench, with switch lever: 10x159 mm, 13x179 mm 4x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: plumbing/heating tool kit 15-piece kpn: Kraftform Kompakt SH 2 kpn_dash: kpn_clear: KraftformKompaktSH2 bkpn: WERA Kraftform Kompakt SH 2 bkpn_clear: WERA KraftformKompaktSH2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136026001 sr_ns: WERA05136026001
r: 41071344 p: 55.206 pid: 72645 b: WERA q: 0 st: lt: 8 ean: 4013288121875 sr: WERA 05003550001 sr_no_br: 05003550001 sr_no_br_cl: 05003550001 sr_cl: WERA05003550001 sr_dash: sold: 1545.768 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 199 mm Drive profile size 3/8" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8000 B Zyklop Speed ratchet with 3/8" drive (3/8" x 199 mm) - 05003550001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop ratchet with 3/8" drive. The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning. Thanks to the shape of the Kraftform handle being perfectly adapted to the hand, hand injuries such as blisters and calluses are avoided. The hard materials used for the handle guarantee quick hand switching without the risk of the skin "sticking" to the handle. The softer, "non-slip" zones offer transmission of high forces without loss. For 3/8" square head socket wrench inserts as well as 3/8" connectors with square head drive, with ball lock. Combines five different types of a ratchet in one Flywheel design and easy-to-grip free-turning sleeve for very high working speeds Freely pivoting ratchet head, push button release and left/right switchover Fine-tooth design allows a small return angle of 5° Can also be used as a screwdriver Application 3/8" square drive sockets and 3/8" adaptors with square drive, equipped with ball lock Design Flywheel design and easy-to-grip free-turning sleeve for faster work, swivel ratchet head, defined lock positions at 0° and 90° to the left and right as well as at 15° before 90° inwards, at 0° it can be used like a conventional screwdriver, pushbutton release, left/right switchover, fine-tooth design, small return angle of 5° Handle Multi-component Kraftform handle ensures minimum fatigue Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. The ball lock holds the sockets and attachments securely, ensuring safe working. A changeover into any predefined position is completed by simply pressing the release button - this is even the case in the 90° position. ds: dsc: Scope of delivery 8000 B Zyklop Speed Ratchet with 3/8" drive, 3/8" x 199 mm kts: Zyklop Speed ratchet with 3/8" drive (3/8" x 199 mm) kpn: 8000 B kpn_dash: kpn_clear: 8000B bkpn: WERA 8000 B bkpn_clear: WERA 8000B c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003550001 sr_ns: WERA05003550001
r: 87011025 p: 25.454 pid: 19792 b: WERA q: 2 st: 1 lt: 1 ean: 4013288180018 sr: WERA 05057415001 sr_no_br: 05057415001 sr_no_br_cl: 05057415001 sr_cl: WERA05057415001 sr_dash: sold: 1527.24 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 7 Product Range Wera Bit-Check n: WERA Bit-Check 7 TX Diamond 1 screwdriver bit set 7-piece - 05057415001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable Bit-Checks convince due to their functionality in a minimum of space BiTorsion bits for long service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Rapidaptor holder for rapid bit change Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 7 TX Diamond 1, 7 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 6x 867/1 BDC TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 7-piece kpn: Bit-Check 7 TX Diamond 1 kpn_dash: Bit kpn_clear: BitCheck7TXDiamond1 bkpn: WERA Bit-Check 7 TX Diamond 1 bkpn_clear: WERA BitCheck7TXDiamond1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057415001 sr_ns: WERA05057415001
r: 02832872 p: 1.72 pid: 43489 b: WERA q: 0 st: lt: 8 ean: 4013288018670 sr: WERA 05021615001 sr_no_br: 05021615001 sr_no_br_cl: 05021615001 sr_cl: WERA05021615001 sr_dash: sold: 1513.6 p_range: none type: standard act: 1 avo: 1 av: Width across flats 3 mm Non-sparking No Overall length 126 mm Blade length 126 mm Surface treatment Chrome plated Short arm length 20 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head No n: WERA 950 L socket spanner metric chrome plated 3 x 126 mm - 05021615001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The precise chrome-plated design ensures high corrosion protection; with extra-long arm. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life High corrosion protection thanks to chrome-plating Extra-long arm Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 L L-key, metric, chrome-plated, 3 x 126 mm kts: socket spanner metric chrome plated 3 x 126 mm kpn: 950 L kpn_dash: kpn_clear: 950L bkpn: WERA 950 L bkpn_clear: WERA 950L c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05021615001 sr_ns: WERA05021615001
r: 02829181 p: 107.396 pid: 44532 b: WERA q: 0 st: lt: 11 ean: 4013288178350 sr: WERA 05135939001 sr_no_br: 05135939001 sr_no_br_cl: 05135939001 sr_cl: WERA05135939001 sr_dash: sold: 1503.544 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 41 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt H 1 tool set for wood in fabric case 41 pieces - 05135939001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with the 41 most important screwdriving tools for applications involving wood. Includes the bit ratchet Zyklop Mini with extension and socket adaptor; 8 manual and power tool sockets, sizes 5.5-13, 1 ratchet holder 816 RA with ratcheting function, fine-pitched teeth for small return angle, switchover ring (right, fixed, left), maximum torque 50 Nm and bit take-up with the Rapidaptor technology; 1 universal bit holder; 6 bits in a length of 25 mm; 16 bits of a length of 89 mm; 5 wood twist drill bits with a diameter of 3-8 mm; 1 screw gripper for firmly holding screws; 1 single-pole phase tester 247; textile box, very robust and durable; can be positioned upright in the workshop shelf for convenient storage; additional surface protection thanks to the textile outer material; low weight and volume for simplified mobility. Robust Zyklop Mini ratchet suitable for take-up of bits and sockets Torque of over 65 Nm thanks to fine-pitched ratchet mechanism and small return angle of 6° Ratcheting screwdriver with Rapidaptor technology for rapid bit change High quality wood twist drill bits for drilling soft wood, hard wood and laminated panel material Set in robust textile box 41-piece set; in surface-protecting, compact textile box, highly robust; low volume and weight for simplified mobility.Compact tool set with the 41 most important screwdriving tools for jobs involving wood: including the robust Bit Ratchet Zyklop Mini with extension and socket adaptor; 8 manual and power tool sockets in the dimensions 5.5-13; 1 hand holder 816 RA with ratchet function, fine toothing for small return angle, switch-over ring (right, fixed, left), maximum torque 50 Nm and bit take-up with Rapidaptor technology; 1 universal bit holder; 6 bits of 25mm in length; 16 bits of 89 mm in length; 5 twist drill bits for wood with a diameter of 3-8mm; 1 screw gripper to firmly hold screws; 1 single-pole phase tester 247; textile box that is very robust and durable; can be positioned upright in the workshop shelf for tidy storage; additional surface protection thanks to the textile outer material; low weight and volume for simplified mobility. Features and benefits Kraftform Kompakt user ranges - the new special sets - compact yet very versatile. Suitable for all sanitary, wood, metal or electrical applications. Compact tool set with the 41 most important screwdriving tools for jobs involving wood. Ratchet screwdriver, fine-tooth design for minimal return angle, switchover ring (right, locked, left), maximum torque of up to 50 Newton metres, 1/4" hexagon chuck with Rapidaptor technology i.e. rapid-in, rapid-out, rapid-spin, chuck-all and single-hand function for rapid bit change, magnetic, suitable for hexagon socket insert bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For all difficult-to-access applications. Twist drill bits - for wood applications 1/4" drive suitable for holders as per DIN 3126-D 6.3 (ISO 1173) Hexagon shaft for very high torque transfer HSS = high speed steel Finely adjusted material elasticity for long service life Excellent concentricity Tough-absorbing tempered bits for particularly long service life The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery Kraftform Kompakt H 1 Woodcraft, 41 pieces 1x 838 RA-R L Bitholding screwdriver with ratchet functionality, 1/4": 1/4" x 140 mm 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 870/1 Adaptor: 1/4" x 25 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 7x 8790 HMA Zyklop 1/4" socket: 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 10x23 mm, 12x23 mm, 13x23 mm 1x 893/4/1 K Universal Bit Holder: 1/4" x 50 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 3x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 2x 867/1 TORX® bits: TX 20x25 mm, TX 25x25 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x 800/1 Z bits: 1 x 5.5 x 25 mm 5x 849 HSS Twist Wood Drill Bits: 3x70 mm, 4x74 mm, 5x85 mm, 6x95 mm, 8x110 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x 1441 SB Screw gripper attachment for screwdriver blades, long bits and L-keys, with holding function for screws: 4.5-6 x 41 mm kts: tool set for wood in fabric case 41 pieces kpn: Kraftform Kompakt H 1 kpn_dash: kpn_clear: KraftformKompaktH1 bkpn: WERA Kraftform Kompakt H 1 bkpn_clear: WERA KraftformKompaktH1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135939001 sr_ns: WERA05135939001
r: 02836605 p: 135.702 pid: 31663 b: WERA q: 0 st: lt: 12 ean: 4013288173980 sr: WERA 05004049001 sr_no_br: 05004049001 sr_no_br_cl: 05004049001 sr_cl: WERA05004049001 sr_dash: sold: 1492.722 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Supplied in Case Quantity per set 25 Product Range Wera Zyklop n: WERA 8100 SB 9 zyklop speed ratchet set, 3/8 drive, inch (29 -piece) - 05004049001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. Take it easy Tool Finder with colour coding according to sizes. Freely pivoting ratchet head with 5 predefined locking positions Fine-pitched with 72 teeth Small return angle of only 5° Free-turning sleeve for high working speeds With Take it easy tool finder: colour coding by size 29-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility1 Zyklop Speed Ratchet with 3/8" drive, 9 Zyklop sockets, 1 Zyklop extension (long) with free-turning sleeve, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 16 bits Features and benefits 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery 8100 SB 9 Zyklop Speed Ratchet Set, 3/8" drive, imperial, 29 pieces 1x 8000 B Zyklop Speed Ratchet with 3/8" drive: 3/8" x 199 mm 9x 8790 HMB Zyklop socket with 3/8" drive: 1/4"x29 mm, 5/16"x29 mm, 3/8"x29 mm, 7/16"x29 mm, 1/2"x29 mm, 9/16"x29 mm, 5/8"x30 mm, 11/16"x30 mm, 3/4"x30 mm 1x 8794 LB Zyklop extension with free-turning sleeve, long, 3/8": 3/8" x 200 mm 1x 8794 B Zyklop wobble extension, 3/8": 3/8" x 76 mm 1x 8784 B1 Zyklop bit adaptor, 3/8": 1/4" x 3/8" x 44 mm 3x 851/4 TZ bits: PH 1x50 mm, PH 2x50 mm, PH 3x50 mm 3x 855/4 TZ bits: PZ 1x50 mm, PZ 2x50 mm, PZ 3x50 mm 5x 867/4 Z TORX® bits: TX 20x50 mm, TX 25x50 mm, TX 27x50 mm, TX 30x50 mm, TX 40x50 mm 4x 840/4 Z bits: 3/16"x50 mm, 7/32"x50 mm, 1/4"x50 mm, 5/16"x50 mm 1x 800/4 Z bits: 1 x 5.5 x 50 mm kts: zyklop speed ratchet set, 3/8 drive, inch (29 -piece) kpn: 8100 SB 9 kpn_dash: kpn_clear: 8100SB9 bkpn: WERA 8100 SB 9 bkpn_clear: WERA 8100SB9 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004049001 sr_ns: WERA05004049001
r: 08103857 p: 70.909 pid: 70457 b: WERA q: 0 st: lt: 14 ean: 4013288229694 sr: WERA 05006618001 sr_no_br: 05006618001 sr_no_br_cl: 05006618001 sr_cl: WERA05006618001 sr_dash: sold: 1489.089 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE 17 RA 1 17-piece set - 05006618001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece Kraftform Kompakt VDE set. One 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, 15 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. Individually tested tools as per IEC 60900. Individually tested in a water quench at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. One Kraftform Kompakt VDE 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle) for interchangeable blades, one 817 VDE bladeholding screwdriver for interchangeable blades The 837 i RA bitholding screwdriver with a ratchet integrated in the handle ensures fast and safe working High working speed: The ratchet can also be used to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication 17-piece setOne 837 i RA bitholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, each solely for Wera VDE blades. 15 VDE blades (each 157 mm length) with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication Features and benefits The integrated ratchet with fine toothing (40 teeth and a return angle of 9°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The bitholding screwdriver is suitable solely for Wera VDE blades. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 17 RA 1, 17 pieces 1x 837 i RA Kraftform blade-holding handle with ratchet functionality: 9 x 115 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 i Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 i Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 i PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm, 1.2x6.5x157 mm 1x Kraftform Kompakt VDE 60 iS Take it easy: 0.6 x 3.5 x 157 mm kts: 17-piece set kpn: Kraftform Kompakt VDE 17 RA 1 kpn_dash: kpn_clear: KraftformKompaktVDE17RA1 bkpn: WERA Kraftform Kompakt VDE 17 RA 1 bkpn_clear: WERA KraftformKompaktVDE17RA1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006618001 sr_ns: WERA05006618001
r: 03176967 p: 14.71 pid: 33891 b: WERA q: 2 st: 1 lt: 1 ean: 4013288217776 sr: WERA 05008874001 sr_no_br: 05008874001 sr_no_br_cl: 05008874001 sr_cl: WERA05008874001 sr_dash: sold: 1456.29 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 2 compact screwdriver with internal bit magazine 6-piece - 05008874001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 2, 6 pieces 2x 800/1 BTZ bits: 0.8x5.5x25 mm, 1.2x6.5x25 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 2 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin2 bkpn: WERA Kraftform Kompakt Stubby Magazin 2 bkpn_clear: WERA KraftformKompaktStubbyMagazin2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008874001 sr_ns: WERA05008874001
r: 02829210 p: 132.066 pid: 42303 b: WERA q: 0 st: lt: 11 ean: 4013288170132 sr: WERA 05135927001 sr_no_br: 05135927001 sr_no_br_cl: 05135927001 sr_cl: WERA05135927001 sr_dash: sold: 1452.726 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 25 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt SH 1 plumbing/heating tool kit 25-piece - 05135927001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with the 25 most important screwdriving tools for plumbing and heating applications. Includes 2 JOKER open-end wrenches, the 1/4" Zyklop ratchet and accessories, 6 x 89 mm bits, 5 multi-component Kraftform Plus screwdrivers and single-pole phase tester. Two JOKER combination ratcheting wrenches with special holding plate against slipping/loss of the screw and more torque transfer; 1 Zyklop ratchet 8000 A (1/4") for fast, powerful working; 3 Zyklop sockets 8790 HMA for manual and power tools usage; 1 Zyklop adaptor 8784 A1 for bits; 6 TORX® HF bits 867/4 with holding function for TORX® screws for secure carry without any loss of the screws; the Wera 867/4 TX HF bits are also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws; 1 single-pole phase tester 247; 2 Kraftform series 100 slotted screwdrivers 160 i and 160 iS for safe work up to 1,000 volts (160 iS with reduced shaft diameter and integrated insulation protection for reaching and actuating low-lying screws and spring elements); 1 Kraftform Chiseldriver 932 A (slotted) with hex blade extending right through the handle and integrated impact cap for screwdriving and simpler chiselling work; 2 nutsetters 395 HO with hollow shaft for the tightening or loosening of screws on long bolts as well as seized screws. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. JOKER combination ratcheting wrench with special holding plate against slipping/loss of the screw Zyklop Speed ratchet for fast and powerful working Insulated Kraftform VDE slotted screwdriver for safe work at 1,000 volts Kraftform Chiseldriver with hex blade extending through handle and integrated impact cap Hollow shaft nutspinner for nuts on protruding threaded rods 25-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility.2 Joker combination ratchet wrenches with special retaining plate to prevent slipping/loss of the screw and more power transfer, 1 Zyklop ratchet 8000 A (1/4") for rapid, powerful operation, 3 Zyklop sockets 8790 HMA for manual and power tool applications, 1 Zyklop adapter 8784 A1 for bits, 6 TORX® HF bits 867/4 with holding function for TORX® screws for secure hold without any loss of the screw, 1 single-pole phase tester 247, 2 Kraftform Series 100 VDE slotted screwdrivers 160 i and 160 iS for safe work up to 1,000 volts (160 iS has a reduced blade diameter with integrated protective insulation to allow sunken screw and spring elements to be reached and actuated) with Take it easy tool finder: colour coding according to profile and size stamp, 1 Kraftform chisel driver 932 A (slotted) with hexagon blade throughout and integrated impact cap for screwdriving and simple chiselling jobs, 2 socket wrench screwdrivers 395 HO with hollow shaft for the tightening or loosening of screws on long bolts as well as for jammed screws. Features and benefits Kraftform Kompakt user ranges - the new special sets - compact yet very versatile. Suitable for all sanitary, wood, metal or electrical applications. Compact tool set with the 25 most important screwdriving tools for plumbing and heating applications. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. ds: dsc: Scope of delivery Kraftform Kompakt SH 1 PlumbKit, 25 pieces 2x 6000 Joker Ratcheting combination wrenches: 10x159 mm, 13x177 mm 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 3x 8790 HMA Zyklop 1/4" socket: 7x23 mm, 10x23 mm, 13x23 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 6x 867/4 TORX® HF Bits with holding function: 2x TX 20x50 mm, 2x TX 25x50 mm, TX 30x50 mm, TX 40x50 mm 2x 851/4 Z bits: PH 2x89 mm, PH 1x89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 1x 160 i VDE Insulated screwdriver for slotted screws: 1 x 5.5 x 125 mm 1x 932 A Screwdriver for slotted screws: 1.2 x 7 x 125 mm 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm kts: plumbing/heating tool kit 25-piece kpn: Kraftform Kompakt SH 1 kpn_dash: kpn_clear: KraftformKompaktSH1 bkpn: WERA Kraftform Kompakt SH 1 bkpn_clear: WERA KraftformKompaktSH1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135927001 sr_ns: WERA05135927001
r: 41071271 p: 30.247 pid: 71238 b: WERA q: 0 st: lt: 9 ean: 4013288041616 sr: WERA 05105622001 sr_no_br: 05105622001 sr_no_br_cl: 05105622001 sr_cl: WERA05105622001 sr_dash: sold: 1451.856 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 335/350/355/6 screwdriver set Kraftform Plus laser tip in holder 6-piece - 05105622001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes practical rack for tidy storage of the screwdrivers. Screwdrivers for slotted and cross-recess Phillips and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and Pozidriv screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 335/350/355/6 Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 2x 335 Screwdriver for slotted screws: 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus laser tip in holder 6-piece kpn: 335/350/355/6 kpn_dash: kpn_clear: 3353503556 bkpn: WERA 335/350/355/6 bkpn_clear: WERA 3353503556 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05105622001 sr_ns: WERA05105622001
r: 02836382 p: 29.586 pid: 33543 b: WERA q: 3 st: 1 lt: 1 ean: 4013288174024 sr: WERA 05004004001 sr_no_br: 05004004001 sr_no_br_cl: 05004004001 sr_cl: WERA05004004001 sr_dash: sold: 1449.714 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 141 mm Drive profile size 1/4" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8004 A Zyklop Metal ratchet with shuttle lever with 1/4" drive (1/4" x 141 mm) - 05004004001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5°. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life. Convenient direction change thanks to switchover lever Extremely slim ratchet with long lever Return angle of only 5° Secure socket locking For 1/4" square sockets with ball lock Application 1/4" square sockets as well as for 1/4" adaptors with square drive, with ball locking device Design Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces; fine-tooth mechanism with 72 teeth for a return angle of only 5°; switch lever for convenient change of direction; secure socket locking function Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. ds: dsc: Scope of delivery 8004 A Zyklop Metal Ratchet with switch lever and 1/4" drive, 1/4" x 141 mm kts: Zyklop Metal ratchet with shuttle lever with 1/4" drive (1/4" x 141 mm) kpn: 8004 A kpn_dash: kpn_clear: 8004A bkpn: WERA 8004 A bkpn_clear: WERA 8004A c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004004001 sr_ns: WERA05004004001
r: 08131818 p: 71.859 pid: 173600 b: WERA q: 0 st: lt: 11 ean: 4013288234896 sr: WERA 05049055001 sr_no_br: 05049055001 sr_no_br_cl: 05049055001 sr_cl: WERA05049055001 sr_dash: sold: 1437.18 p_range: KLIUM_PRODUCT_RANGE_312 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Plastic holder Quantity per set 39 Product Range Wera Tool-Check n: WERA Tool-Check PLUS 1 tool set, 39-piece - 05049055001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 39-piece set. Very compact tool set for manual and machine use. The green locking elements of the Tool-Check secure the tools during transport. Includes one 1/4" bit ratchet in drop-forged solid steel design. Fine toothing mechanism (60 teeth) for a small return angle of 6° for precise working. Easy clockwise/counterclockwise switching. Ergonomically shaped ratchet head and lever. 1/4" sockets can also be used with the Wera 870/1 adapter (1/4" external hexagon to 1/4" external square head) included in the set. 7 Zyklop sockets (1/4") for manual and machine-operated tools; with ball stop groove. Knurling at the rear end for manageability during manual screwdriving. With Take it easy tool finder: colour coding by size - for quick and easy identification of the required tool. Made of matte chrome-plated chrome-vanadium. 28 bits, BTZ and BTH design with BiTorsion zone (prevents the bit from breaking prematurely) and Take it easy tool finder: colour coding by profile and size stamping, tough design (Z) for universal use, Phillips and Pozidriv, TORX®, TORX® BO, slotted and hexagonal socket. In the very compact, functional Tool-Check. Very compact 39-piece tool set for manual and machine use Perfect for a wide variety of screw connections with Zyklop Mini with 1/4" bit mounting, bitholding screwdriver or bit holder Green locking components to secure the tools Ideal for mobile use 1/4" bit ratchet, Kraftform bitholding screwdriver, BiTorsion bits (BTZ and BTH), Rapidaptor holder, adapter and 1/4" sockets 28 bits, BTZ and BTH design with BiTorsion zone (prevents the bit from breaking prematurely) and Take it easy tool finder: colour coding by profile and size stamping, one 813 handle suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1, one Rapidaptor bitholding screwdriver suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4, one 870/1 adapter (1/4" hexagon to 1/4" square head), 7 sockets (1/4") with Take it easy tool finder: colour coding by size. One Wera Zyklop Mini 1 bit ratchet, drop-forged solid steel design; suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4; 1/4" sockets can also be used by connecting the Wera 870/1 adapter Features and benefits Tool-Check PLUS: 39-piece tool combination of ratchet, sockets and one bitholding screwdriver The set offers 39 tools in an extremely efficient, space-saving box. The Tool-Check is made of premium plastic, guarantees neat arrangement, quick access to the required tools and secure transport - no risk of losing tools! The green locking components of the Tool-Check secure the tool reliably during transport. At the same time, they are easy to operate and allow quick access to the tools. With their extremely compact design, the Zyklop Mini ratchets are particularly suitable for all hard-to-reach applications. 1/4" sockets can also be used with the Zyklop Mini bit ratchet by connecting the 870/1 adapter (1/4" hexagon to 1/4" square head). The Zyklop sockets are suitable for manual and machine-operated tools (non impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use. They are made of chrome-vanadium, matte-chromed. Take it easy tool finder: colour coding by size as well as size stamping - to help you find the required socket quickly and easily. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With BiTorsion zone to cushion peak loads. ds: dsc: Scope of delivery Tool-Check PLUS 1, 39 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 813 Bitholding screwdriver: 1/4" x 78 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 6x 851/1 BTZ bits: 2x PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 5x 855/1 BTH bits: PZ 1x25 mm, 3x PZ 2x25 mm, PZ 3x25 mm 6x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 5x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 1x 800/1 BTZ bits: 1 x 5.5 x 25 mm 4x 840/1 BTZ bits: 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm 1x 840/1 Z bits: 8 x 25 mm 7x 8790 HMA Zyklop 1/4" socket: 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 10x23 mm, 12x23 mm, 13x23 mm kts: tool set, 39-piece kpn: Tool-Check PLUS 1 kpn_dash: Tool kpn_clear: ToolCheckPLUS1 bkpn: WERA Tool-Check PLUS 1 bkpn_clear: WERA ToolCheckPLUS1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera tool-check sr_no_br_cl_ns: 05049055001 sr_ns: WERA05049055001
r: 02828863 p: 239.504 pid: 42539 b: WERA q: 0 st: lt: 11 ean: 4013288184153 sr: WERA 05020093001 sr_no_br: 05020093001 sr_no_br_cl: 05020093001 sr_cl: WERA05020093001 sr_dash: sold: 1437.024 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 5/16 inch Largest size 3/4 inch Quantity per set 8 Product Range Wera Joker n: WERA 6001 Joker Switch 8 Imperial Set 1 socket and ring spanner set, Inch, 8-piece - 05020093001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches, reversible8-piece setIn a robust textile box Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch 8 Imperial Set 1 Ratcheting combination wrenches set, Imperial, 8 pieces 8x 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial: 5/16"x144 mm, 3/8"x159 mm, 7/16"x165 mm, 1/2"x171 mm, 9/16"x187 mm, 5/8"x213 mm, 11/16"x234 mm, 3/4"x246 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: socket and ring spanner set, Inch, 8-piece kpn: 6001 Joker Switch 8 Imperial Set 1 kpn_dash: kpn_clear: 6001JokerSwitch8ImperialSet1 bkpn: WERA 6001 Joker Switch 8 Imperial Set 1 bkpn_clear: WERA 6001JokerSwitch8ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratcheting combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratcheting combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020093001 sr_ns: WERA05020093001
r: 08103771 p: 110.247 pid: 70378 b: WERA q: 0 st: lt: 15 ean: 4013288227980 sr: WERA 05005530001 sr_no_br: 05005530001 sr_no_br_cl: 05005530001 sr_cl: WERA05005530001 sr_dash: sold: 1433.211 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 3/8" Min. socket size 8 mm; 24 mm Quantity per set 16 Product Range Wera Zyklop n: WERA 8100 SB 12 Zyklop Comfort ratchet set, shuttle lever, 3/8" drive, metric, 16-piece - 05005530001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description 16-piece Zyklop Comfort ratchet set in a light and robust, durable textile box. The 2-component plastic sleeve of the Zyklop Comfort ratchet makes working comfortable even in the cold and at the same time protects surfaces against damage. The Zyklop Impaktor sockets stand out with higher-than-average service life even at extreme requirements. The required size is easily accessible due to the Take it easy Tool finder (colour coding by size). The Zyklop extension also makes it easy to operate hard-to-reach screws and bolts. 16-piece Zyklop Comfort ratchet set; metric sizes Pleasant feel thanks to the plastic sleeve Plastic sleeve protects surfaces from damage Fine toothing with 80 teeth for a short return angle of only 4.5° Extremely slim design with a soft, ergonomic grip zone for easy work even in very confined spaces 16-piece set; in surface-friendly, compact and extremely robust textile box. Small size and low weight for better mobility.1 Zyklop Comfort ratchet with reversing lever with 3/8" drive, 14 Zyklop Impaktor sockets, 1 Zyklop extension Features and benefits With its fine toothing with 80 teeth, the Zyklop Comfort ratchet allows a short return angle of only 4.5°. The plastic sleeve makes working comfortable and safe even at extremely low or high temperatures. With its fine toothing with 80 teeth, the Zyklop Comfort ratchet allows a short return angle of only 4.5°. With its extremely slim design, the Zyklop Comfort ratchet allows easy working even in very confined spaces. The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. Switch lever for convenient change of direction. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 8100 SB 12 Zyklop Comfort Ratchet set, reversing lever, 3/8" drive, metric, 16 pieces 1x 8010 B Zyklop Comfort Ratchet, with reversing lever, with 3/8" drive: 3/8" x 230 mm 14x 8790 B Impaktor socket with 3/8" drive: 8x30 mm, 10x30 mm, 11x30 mm, 12x30 mm, 13x30 mm, 14x30 mm, 15x30 mm, 16x30 mm, 17x30 mm, 18x30 mm, 19x30 mm, 21x32 mm, 22x32 mm, 24x32 mm 1x 8798 B Zyklop Extension, 3/8": 3/8" x 152.4 mm kts: Zyklop Comfort ratchet set, shuttle lever, 3/8" drive, metric, 16-piece kpn: 8100 SB 12 kpn_dash: kpn_clear: 8100SB12 bkpn: WERA 8100 SB 12 bkpn_clear: WERA 8100SB12 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05005530001 sr_ns: WERA05005530001
r: 87010053 p: 9.421 pid: 73964 b: WERA q: 116 st: 1 lt: 1 ean: 4013288017666 sr: WERA 05053455001 sr_no_br: 05053455001 sr_no_br_cl: 05053455001 sr_cl: WERA05053455001 sr_dash: sold: 1431.992 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 75 mm n: WERA 899/4/1 universal bit holder, 1/4" x 75 mm - 05053455001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for outstanding corrosion protection. The retaining ring guarantees optimal fit of the tool in the holder. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive Stainless sleeve, retaining ring and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With stainless steel sleeve, retaining ring, and strong permanent magnet Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery 899/4/1 Universal Bit Holder, 1/4" x 75 mm kts: universal bit holder, 1/4" x 75 mm kpn: 899/4/1 kpn_dash: kpn_clear: 89941 bkpn: WERA 899/4/1 bkpn_clear: WERA 89941 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053455001 sr_ns: WERA05053455001
r: 02836381 p: 35.371 pid: 32704 b: WERA q: 1 st: 1 lt: 1 ean: 4013288174048 sr: WERA 05004034001 sr_no_br: 05004034001 sr_no_br_cl: 05004034001 sr_cl: WERA05004034001 sr_dash: sold: 1414.84 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 222 mm Drive profile size 3/8" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8004 B Zyklop Metal ratchet with shuttle lever with 3/8" drive (3/8" x 222 mm) - 05004034001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5°. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life. Convenient direction change thanks to switchover lever Extremely slim ratchet with long lever Return angle of only 5° Secure socket locking For 3/8" square sockets with ball lock Application 3/8" square sockets as well as for 3/8" adaptors with square drive, with ball locking device Design Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces; fine-tooth mechanism with 72 teeth for a return angle of only 5°; switch lever for convenient change of direction; secure socket locking function Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. ds: dsc: Scope of delivery 8004 B Zyklop Metal Ratchet with switch lever and 3/8" drive, 3/8" x 222 mm kts: Zyklop Metal ratchet with shuttle lever with 3/8" drive (3/8" x 222 mm) kpn: 8004 B kpn_dash: kpn_clear: 8004B bkpn: WERA 8004 B bkpn_clear: WERA 8004B c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004034001 sr_ns: WERA05004034001
r: 03228479 p: 31.239 pid: 70946 b: WERA q: 0 st: lt: 10 ean: 4013288193544 sr: WERA 05024480001 sr_no_br: 05024480001 sr_no_br_cl: 05024480001 sr_cl: WERA05024480001 sr_dash: sold: 1405.755 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile Torx Supplied in Clip Quantity per set 9 n: WERA 967/9 TX XL Multicolour 1 spanner set long 9-piece - 05024480001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description Premium L-key set for TORX® socket screws. One arm extra long. Includes some tools with ball head: The ball on the long arm allows safe working even in difficult installation positions. L-keys with plastic sleeve made of circular, easy-grip material. The sleeve makes working comfortable even at low temperatures and is easy on the fingers. Take it easy tool finder with colour coding by size. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. In a handy clip made of wear-free material for a permanently secure hold of the L-keys while also being easily accessible. The TORX® ballpoint on the long arm allows offset applications With Take it easy tool finder: colour coding by size The plastic sleeve ensures that work is pleasant and safe even at low temperatures BlackLaser for high corrosion protection and long service life Wear-resistant inscription of the sizes of the L-keys contained on the clip 9-piece set in a two-component clip Application TORX® socket screws Design Round, zinc-phosphated, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball end on long arm, TX 8, TX 9, TX 10: without ball-end at the long arm Features and benefits L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967/9 TX XL Multicolour 1 L-key set for TORX® screws, long, 9 pieces 3x 967 SXL TORX® L-key Multicolour, long: TX 8x90 mm, TX 9x101 mm, TX 10x112 mm 6x 967 SPKXL TORX® L-key Multicolour, long: TX 15x123 mm, TX 20x137 mm, TX 25x154 mm, TX 27x172 mm, TX 30x195 mm, TX 40x224 mm kts: spanner set long 9-piece kpn: 967/9 TX XL Multicolour 1 kpn_dash: kpn_clear: 9679TXXLMulticolour1 bkpn: WERA 967/9 TX XL Multicolour 1 bkpn_clear: WERA 9679TXXLMulticolour1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05024480001 sr_ns: WERA05024480001
r: 02815006 p: 60.991 pid: 18532 b: WERA q: 0 st: lt: 10 ean: 4013288145765 sr: WERA 05346293001 sr_no_br: 05346293001 sr_no_br_cl: 05346293001 sr_cl: WERA05346293001 sr_dash: sold: 1402.793 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Torx; Hexagon; Slotted; Square Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 31 Product Range Wera Bit-Check n: WERA Bit-Check 30 Zyklop Mini 2 screwdriver bit set 31-piece - 05346293001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description The Wera Mini ratchet: a symbiosis of strength and stylishness. Incredibly robust due to its drop-forged, full-steel design. Can withstand torque forces up to 65 Nm. The petite sizing is particularly suited for work in confined spaces. The thumbwheel allows fast screwdriving. Comes in a set in the proven Wera Bit-Check with socket adaptor and belt clip. Simple tool removal and reinsertion is ensured, very robust and durable. Bit-Checks convince due to their functionality in a minimum of space Wera Mini ratchet for particularly fast screwdriving even in confined spaces Ideal for working in confined spaces Tough viscous bits for universal use In handy and robust Bit-Check 28 bits, 1 Rapidaptor bit holder, 1 adaptor 870/1 (1/4" hexagon to 1/4" square ), 1 Wera Bit Ratchet Zyklop Mini 1, drop-forged full steel design, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Thumbwheel enables rapid screwdriving, even when there isn't sufficient room for ratcheting use. Simple switching between left/right operations. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery Bit-Check 30 Zyklop Mini 2, 31 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 6x 851/1 TZ bits: 2x PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 6x 867/1 TZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 5x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 5x 840/1 Z bits: 3/32"x25 mm, 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm, 1/4"x25 mm 1x 800/1 TZ bits: 1 x 5.5 x 25 mm 5x 868/1 Z Square-Plus bits: # 1x25 mm, 3x # 2x25 mm, # 3x25 mm kts: screwdriver bit set 31-piece kpn: Bit-Check 30 Zyklop Mini 2 kpn_dash: Bit kpn_clear: BitCheck30ZyklopMini2 bkpn: WERA Bit-Check 30 Zyklop Mini 2 bkpn_clear: WERA BitCheck30ZyklopMini2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05346293001 sr_ns: WERA05346293001
