r: 87011040 p: 56.033 pid: 21020 b: WERA q: 0 st: lt: 14 ean: 4013288115126 sr: WERA 05071109001 sr_no_br: 05071109001 sr_no_br_cl: 05071109001 sr_cl: WERA05071109001 sr_dash: sold: 1400.825 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 Stainless 1 screwdriver bit set, 30-piece - 05071109001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bit-Check that can be positioned upright with high quality bits out of stainless steel. Wera stainless tools are manufactured out of stainless steel, thus preventing the formation of unsightly extraneous rust. 29 Wera stainless bits. 1 stainless Rapidaptor quick-release holder. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable, multi-component Bit-Check Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Rapidaptor technology for rapid bit change Industrial applications possible without any constraints 1 Rapidaptor stainless steel bit holder with quick-release chuck, 29 stainless steel bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Manufactured out of stainless steel thus preventing the formation of unsightly extraneous rust when working with stainless steel. Additionally, it offers all the advantages of the Rapidaptor technology. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Bit-Check 30 Stainless 1, 30 pieces 1x 3888/4/1 K Rapidaptor Universal Bit Holder, stainless: 1/4" x 50 mm 5x 3851/1 TS bits, stainless: PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 6x 3855/1 TS bits, stainless: 2x PZ 1x25 mm, 3x PZ 2x25 mm, PZ 3x25 mm 13x 3867/1 TS TORX® bits, stainless: 2x TX 10x25 mm, 2x TX 15x25 mm, 3x TX 20x25 mm, 3x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm 5x 3840/1 TS bits, stainless: 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 5.5x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 Stainless 1 kpn_dash: Bit kpn_clear: BitCheck30Stainless1 bkpn: WERA Bit-Check 30 Stainless 1 bkpn_clear: WERA BitCheck30Stainless1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05071109001 sr_ns: WERA05071109001
r: 02835997 p: 86.611 pid: 41734 b: WERA q: 0 st: lt: 12 ean: 4013288106964 sr: WERA 05074730001 sr_no_br: 05074730001 sr_no_br_cl: 05074730001 sr_cl: WERA05074730001 sr_dash: sold: 1385.776 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7400 ESD Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 0.3-1.2 Nm - 05074730001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7440 ESD x 0.3-1.2 Nm kts: Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 0.3-1.2 Nm kpn: 7400 ESD kpn_dash: kpn_clear: 7400ESD bkpn: WERA 7400 ESD bkpn_clear: WERA 7400ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074730001 sr_ns: WERA05074730001
r: 08085426 p: 229.71 pid: 69941 b: WERA q: 0 st: lt: 11 ean: 4013288225115 sr: WERA 05150121001 sr_no_br: 05150121001 sr_no_br_cl: 05150121001 sr_cl: WERA05150121001 sr_dash: sold: 1378.26 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Smallest size 6 mm Largest size 24 mm Product Range Wera Joker n: WERA 9731 Ratchet wrench set 6003 Joker Set 1 in foam insert 19-piece - 05150121001 cn: COMBINATION SPANNER MODULE cn2: COMBINATION SPANNER MODULE cn_clear: COMBINATIONSPANNERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 18 Wera 6003 Joker ring spanners and one Wera Kraftform bottle opener. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 18-piece 6003 Joker ring spanner set, 1 Kraftform bottle opener, in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 58 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 9731 Foam insert 6003 Joker set 1, 19 pieces 18x 6003 Joker Combination wrench: 6x105 mm, 7x110 mm, 8x115 mm, 9x120 mm, 10x125 mm, 11x135 mm, 12x148 mm, 13x160 mm, 14x167 mm, 15x174 mm, 16x182 mm, 17x190 mm, 18x210 mm, 19x230 mm, 20x230 mm, 21x260 mm, 22x260 mm, 24x280 mm 1x Bottle opener: 148 1x 9831 Foam insert 6003 Joker Set 1, empty: 344 x 30 x 392 mm kts: Ratchet wrench set 6003 Joker Set 1 in foam insert 19-piece kpn: 9731 kpn_dash: kpn_clear: 9731 bkpn: WERA 9731 bkpn_clear: WERA 9731 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner module | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05150121001 sr_ns: WERA05150121001
r: 08085422 p: 151.735 pid: 69936 b: WERA q: 0 st: lt: 9 ean: 4013288225306 sr: WERA 05150111001 sr_no_br: 05150111001 sr_no_br_cl: 05150111001 sr_cl: WERA05150111001 sr_dash: sold: 1365.615 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Mixed Connection size 3/8" Smallest size 6 mm Largest size 24 mm Product Range Wera Zyklop n: WERA 9721 bit set 3/8" with 8000 B Zyklop ratchet in foam insert 23-piece - 05150111001 cn: HAND SOCKET MODULE cn2: HAND SOCKET MODULE cn_clear: HANDSOCKETMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with one Wera Zyklop Speed ratchet 3/8" and 22-piece accessories set. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 23-piece Zyklop ratchet set, 3/8", in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 45 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 9721 Foam insert 8000 B Zyklop 3/8" ratchet set 1, 23 pieces 1x 8000 B Zyklop Speed Ratchet with 3/8" drive: 3/8" x 199 mm 1x 8794 SB Zyklop extension with free-turning sleeve, short, 3/8": 3/8" x 125 mm 1x 8794 LB Zyklop extension with free-turning sleeve, long, 3/8": 3/8" x 200 mm 1x 8795 B Zyklop universal joint, 3/8": 3/8" x 50 mm 1x 8794 B Zyklop wobble extension, 3/8": 3/8" x 76 mm 18x 8790 HMB Zyklop socket with 3/8" drive: 6x29 mm, 7x29 mm, 8x29 mm, 9x29 mm, 10x29 mm, 11x29 mm, 12x29 mm, 13x29 mm, 14x29 mm, 15x29 mm, 16x30 mm, 17x30 mm, 18x30 mm, 19x30 mm, 20x30 mm, 21x30 mm, 22x30 mm, 24x32 mm 1x 9821 Foam insert 8000 B Zyklop 3/8" ratchet set 1, empty: 172 x 30 x 392 mm kts: bit set 3/8" with 8000 B Zyklop ratchet in foam insert 23-piece kpn: 9721 kpn_dash: kpn_clear: 9721 bkpn: WERA 9721 bkpn_clear: WERA 9721 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket module | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05150111001 sr_ns: WERA05150111001
r: 08085431 p: 90.743 pid: 72013 b: WERA q: 0 st: lt: 14 ean: 4013288225177 sr: WERA 05150181001 sr_no_br: 05150181001 sr_no_br_cl: 05150181001 sr_cl: WERA05150181001 sr_dash: sold: 1361.145 p_range: none type: standard act: 1 avo: 1 av: Pliers type Assortment VDE approved No With safety colour code 1000V No ESD No Non-sparking No Quantity per set 3 n: WERA 9781 foam insert with KNIPEX pliers Set 2, 3-piece - 05150181001 cn: PLIERS MODULE cn2: PLIERS MODULE cn_clear: PLIERSMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 1 KNIPEX snipe nose cutting pliers (stork beak pliers), 1 KNIPEX mechanics' pliers as well as 1 KNIPEX electricians' shears. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 3-piece pliers set (1 KNIPEX snipe nose cutting pliers (stork beak pliers), 1 KNIPEX mechanics' pliers, 1 KNIPEX electricians' shears ), in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 38 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9781 Foam insert KNIPEX pliers set 2, 3 pieces 1x KNIPEX Snipe Nose Cutting Pliers (Stork Beak Pliers) 26 15 200: 200 mm 1x KNIPEX Mechanics' Pliers 38 25 200: 200 mm 1x KNIPEX Electricians' Shears 95 05 155: 155 mm 1x 9881 Foam insert KNIPEX pliers set 2, empty: 172 x 30 x 392 mm kts: foam insert with KNIPEX pliers Set 2, 3-piece kpn: 9781 kpn_dash: kpn_clear: 9781 bkpn: WERA 9781 bkpn_clear: WERA 9781 c_path: Home / Tools / Hand tools / Pliers, grippers and tweezers / Sets / Pliers module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera pliers, grippers and tweezers / Wera sets / Wera pliers module sr_no_br_cl_ns: 05150181001 sr_ns: WERA05150181001
r: 02829030 p: 53.677 pid: 42292 b: WERA q: 0 st: lt: 10 ean: 4013288138521 sr: WERA 05072448001 sr_no_br: 05072448001 sr_no_br_cl: 05072448001 sr_cl: WERA05072448001 sr_dash: sold: 1341.925 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 Number per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 20 x 25 mm (100 pcs) - 05072448001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 20 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 20 x 25 mm kts: bits, TX 20 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072448001 sr_ns: WERA05072448001
r: 02897330 p: 44.462 pid: 31144 b: WERA q: 0 st: lt: 14 ean: 4013288191007 sr: WERA 05003345001 sr_no_br: 05003345001 sr_no_br_cl: 05003345001 sr_cl: WERA05003345001 sr_dash: sold: 1333.86 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Type of drive profile Hexagonal Quantity per set 5 Product Range Wera Zyklop n: WERA 8740 A HF 1 Zyklop bit socket set hexagon socket with holding function 1/4" drive 5-piece - 05003345001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Bit socket set, hexagon socket, with holding function for particularly convenient screwdriving with reduced risk of losing the screw when addressing the workpiece. Compact textile box with high robustness, low weight and volume Bit socket (non-impact) for manual or power tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower socket end for more grip when used manually 5-piece setPouch with 100 mm bit sockets5 Zyklop bit sockets for hexagon socket screws, with 1/4" drive, with holding function, Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located. Features and benefits The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8740 A HF 1 Zyklop bit socket set with holding function, 1/4" drive, 5 pieces 5x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 4x100 mm, 5x100 mm, 6x100 mm, 7x100 mm, 8x100 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Zyklop bit socket set hexagon socket with holding function 1/4" drive 5-piece kpn: 8740 A HF 1 kpn_dash: kpn_clear: 8740AHF1 bkpn: WERA 8740 A HF 1 bkpn_clear: WERA 8740AHF1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003345001 sr_ns: WERA05003345001
r: 02832340 p: 16.033 pid: 20017 b: WERA q: 0 st: lt: 11 ean: 4013288157805 sr: WERA 05057675001 sr_no_br: 05057675001 sr_no_br_cl: 05057675001 sr_cl: WERA05057675001 sr_dash: sold: 1330.739 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 75 mm n: WERA 897/4 Impaktor holder with clamping ring and magnet, 1/4" x 75 mm - 05057675001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Wera Impaktor holder for the absorption of impulse peaks. Particular torsion effect thanks to the double-torsion spring. The retaining ring ensures an optimum fit of the tool in the holder. The magnet provides for additional fixing of the bit and screw. The Impaktor stainless holder with retaining ring and magnet meets the extremely dynamic demands by doing without any small, mechanical parts that are often susceptible. Used mostly for industrial assembly applications such as e.g. with screwdriving robots. Output: suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Drive: 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Impaktor holder with retaining ring and magnet for bits with 1/4" hexagon head drive Double-torsion spring to absorb extreme impulse peaks Stainless holder with magnet for the secure fit of bit and screw Particularly suitable for use with customary impact drivers 1/4" hexagon drive Impaktor holder to cushion extreme impulse peaks, special torsion effect from the double-torsion spring, equipped with a retaining ring for a secure fit of the bits in the holder, holder out of stainless steel, fitted with magnet for a secure positioning of the bit and screw. Output Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and Wera Series 1 Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry (two coupled torsion zones that perform successively), fitted with strong retaining ring and magnet Drive 1/4" hexagon, suitable for power driven screwdrivers withDIN ISO 1173-F 6.3 chucks Features and benefits The Impaktor stainless steel holder with a retaining ring and magnet satisfies the extreme, dynamic requirements in that there are consciously no small mechanical component parts fitted as they would be more susceptible to failure. It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones. Mainly used in industrial screw assembly applications e.g. with screwdriving robots. Suitable for extra high torque e.g. from modern 18 volt impact screwdrivers with particularly high resilience. Reduces the risk of premature breakage of the holder or bit and increases the productivity when screwdriving with power tools. Wera's Impaktor system consisting of Impaktor bits and Impaktor holders is today's necessary addition to the BiTorsion system with the creation of the TriTorsion system. Wera Impaktor bits and holders can also be used individually. However, the best results are achieved with the combination of the two tools that are optimally matched to one another. ds: dsc: Scope of delivery 897/4 IMP Impaktor holder with retaining ring and magnet, 1/4" x 75 mm kts: holder with clamping ring and magnet, 1/4" x 75 mm kpn: 897/4 Impaktor kpn_dash: kpn_clear: 8974Impaktor bkpn: WERA 897/4 Impaktor bkpn_clear: WERA 8974Impaktor c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05057675001 sr_ns: WERA05057675001
r: 03229082 p: 102.314 pid: 71707 b: WERA q: 0 st: lt: 10 ean: 4013288217721 sr: WERA 05134013001 sr_no_br: 05134013001 sr_no_br_cl: 05134013001 sr_cl: WERA05134013001 sr_dash: sold: 1330.082 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 36 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt F 1 screwdriver tool set for frame construction 36-piece - 05134013001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact Wera screwdriving tool set with the 36 most important tools for window construction. Premium 36-piece universal tool set for the professional window builder 393 S extra slim bit hand holder with flexible shaft for applications in hard-to-reach work spaces With Joker 6004 S spanner and Zyklop Mini 1 bit ratchet (1/4") Socket wrench and bit assortment in premium Wera quality, attuned to universal window construction applications Compact and stable tool box with Wera 2go compatibility 36-piece set; in a surface-preserving, compact and extremely robust textile box. Low volume and weight for simplified mobility.Compact tool set for professional window installation. 1x 393 S extra slim bitholding screwdriver with flexible shaft, with a compact stainless steel holder and strong permanent magnet, secure bit holding feature due to locking mechanism for the application in hard-to-reach installation spaces, 1x 813 bit holder, 14 bits, 1x 1/4" Zyklop Mini 8001 A bit-ratchet, 1x 870/1 adapter (1/4"-hexagon to 1/4"-square head) 1 Zyklop 8794 SA extention, 1/4", short, for socket wrench inserts, 4 Zyklop socket wrench inserts, 2 Hex-Plus L-keys for hexagonal socket screws, 3 Hex-Plus L-keys with holding function for hexagonal socket screws, 6 L-keys with holding function for TORX® screws, 1x 6004 S self-setting spanner for hexagon screw heads and bolts with wrench size 10-13 (metric) or 7/16"-1/2" (imperial). Features and benefits Around the corner screwdriving with the 393 S bitholding screwdriver. The flexible shaft allows to reach fixing screws in unfavourable positions. The ideal tool for srewdriving situations that are difficult to reach. Compact Wera screwdriving tool set with the 35 most important tools for window construction. Socket and bit assortment in premium Wera quality, attuned to universal window construction applications. With 2 bit hand holders and 1 bit ratchet (which can also be used for sockets, if used with an adaptor). Around the corner screwdriving with the 393 S bitholding screwdriver. The flexible shaft allows to reach fixing screws in unfavourable positions. The ideal tool for srewdriving situations that are difficult to reach. Secure bit holding feature due to locking mechanism. With strong permanent magnet. The particularly slim bit holder allows working in very tight work spaces. The Zyklop Mini 1 mini ratchet allows particularly quick screwdriving, even in narrow work situations. With direct bit mounting. With the Wera 870/1 adapter (1/4"-hexagon to 1/4"-square head), 1/4" sockets can also be operated. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. ds: dsc: Scope of delivery Kraftform Kompakt F 1 screwdriving tool set for window installation, 36 pieces 1x 393 S Bitholding screwdriver extra slim with flexible shaft: 1/4" x 173.5 mm 1x 813 Bitholding screwdriver: 1/4" x 78 mm 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 870/1 Adaptor: 1/4" x 25 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 4x 8790 HMA Zyklop 1/4" socket: 7x23 mm, 8x23 mm, 10x23 mm, 13x23 mm 3x 851/4 TZ bits: PH 1x50 mm, PH 2x50 mm, PH 3x50 mm 6x 867/4 Z TORX® bits: TX 8x50 mm, TX 10x50 mm, TX 15x50 mm, TX 20x50 mm, TX 25x50 mm, TX 30x50 mm 6x 840/4 Z bits: 2x50 mm, 2.5x50 mm, 3x50 mm, 4x50 mm, 5x50 mm, 6x89 mm 2x 950 SPKL L-key Multicolour, metric: 2x101 mm, 2.5x112 mm 3x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm 6x 967 SXL HF TORX® L-key Multicolour with holding function, long: TX 8x90 mm, TX 10x112 mm, TX 15x123 mm, TX 20x137 mm, TX 25x154 mm, TX 30x195 mm 1x 6004 Joker S Self-setting spanner: 10; 11; 12; 13 x 7/16; 1/2" x 154 mm kts: screwdriver tool set for frame construction 36-piece kpn: Kraftform Kompakt F 1 kpn_dash: kpn_clear: KraftformKompaktF1 bkpn: WERA Kraftform Kompakt F 1 bkpn_clear: WERA KraftformKompaktF1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05134013001 sr_ns: WERA05134013001
r: 02865682 p: 132.066 pid: 70142 b: WERA q: 0 st: lt: 8 ean: 4013288193773 sr: WERA 05075651001 sr_no_br: 05075651001 sr_no_br_cl: 05075651001 sr_cl: WERA05075651001 sr_dash: sold: 1320.66 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 9 x 12 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque n: WERA Click-Torque X 1 torque spanner for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 nm - 05075651001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools. Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 2.5-25 Nm; precision ±4 % as per DIN EN ISO 6789-1:2017-07 Very robust design with ergonomic 2-component handle suitable for right and left-handed use Application For right and left-handed use Precision ± 4% of set value, as per DIN EN ISO 6789-1: 2017-07 Design For 9x12 mm interchangeable insert tools; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). For 9x12 mm interchangeable insert tools. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The Click-Torque wrenches for insert tools are suitable forclockwise and counterclockwise uses. ds: dsc: Scope of delivery Click-Torque X 1 torque wrench for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 Nm kts: torque spanner for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 nm kpn: Click-Torque X 1 kpn_dash: Click kpn_clear: ClickTorqueX1 bkpn: WERA Click-Torque X 1 bkpn_clear: WERA ClickTorqueX1 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075651001 sr_ns: WERA05075651001
r: 41071277 p: 14.71 pid: 71866 b: WERA q: 14 st: 1 lt: 1 ean: 4013288104809 sr: WERA 05022086001 sr_no_br: 05022086001 sr_no_br_cl: 05022086001 sr_cl: WERA05022086001 sr_dash: sold: 1309.19 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 6 socket wrench set metric BlackLaser 9-piece - 05022086001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys with Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 6 L-key set, metric, BlackLaser, 9 pieces 9x 950 PKL BM L-key, metric, BlackLaser: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric BlackLaser 9-piece kpn: 950/9 Hex-Plus 6 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus6 bkpn: WERA 950/9 Hex-Plus 6 bkpn_clear: WERA 9509HexPlus6 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022086001 sr_ns: WERA05022086001
r: 02831995 p: 35.206 pid: 42462 b: WERA q: 0 st: lt: 14 ean: 4013288180858 sr: WERA 05024335001 sr_no_br: 05024335001 sr_no_br_cl: 05024335001 sr_cl: WERA05024335001 sr_dash: sold: 1302.622 p_range: none type: standard act: 1 avo: 1 av: Min. head size 8 Max. head size 40 Type of drive profile Torx Plus Tamper Resistant Supplied in Clip Quantity per set 9 Material Stainless steel n: WERA 967/9 TX BO Multicolour 1 socket wrench set BlackLaser 9-piece - 05024335001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description L-keys with thermoplastic sleeve (SPKL) out of easy-to-grip circular material. The sleeve ensures that work is pleasant and easy on the fingers even at low temperatures. All L-keys are quickly to hand thanks to their size markings. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. For TORX® and TORX® BO (with bore hole) screw connections. The plastic sleeve ensures that work is pleasant and safe even at low temperatures BlackLaser for high corrosion protection and long service life The TORX® ballpoint on the long arm allows offset applications Wear-resistant inscription of the sizes of the L-keys contained on the clip Size markings 9-piece set in a two-component clip. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball-end on long arm Features and benefits L-key for TORX® socket screws with safety pin TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 967/9 TX BO Multicolour 1 L-key set for tamper-proof TORX® screws, BlackLaser, 9 pieces 9x 967 SPKL TORX® BO L-key Multicolour: TX 9x79 mm, TX 8x76 mm, TX 10x85 mm, TX 15x90 mm, TX 20x96 mm, TX 25x104 mm, TX 30x122 mm, TX 40x132 mm, TX 27x112 mm kts: socket wrench set BlackLaser 9-piece kpn: 967/9 TX BO Multicolour 1 kpn_dash: kpn_clear: 9679TXBOMulticolour1 bkpn: WERA 967/9 TX BO Multicolour 1 bkpn_clear: WERA 9679TXBOMulticolour1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05024335001 sr_ns: WERA05024335001
r: 03176897 p: 7.768 pid: 33853 b: WERA q: 0 st: lt: 14 ean: 4013288219039 sr: WERA 05020190001 sr_no_br: 05020190001 sr_no_br_cl: 05020190001 sr_cl: WERA05020190001 sr_dash: sold: 1297.256 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 5,5 mm Length 105 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (5.5 x 105 mm) - 05020190001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 5.5 x 105 mm kts: ring spanner (5.5 x 105 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020190001 sr_ns: WERA05020190001
r: 02830306 p: 99.008 pid: 42759 b: WERA q: 0 st: lt: 12 ean: 4013288178633 sr: WERA 05135949001 sr_no_br: 05135949001 sr_no_br_cl: 05135949001 sr_cl: WERA05135949001 sr_dash: sold: 1287.104 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Mixed Connection size 1/4" Min. socket size 1/4 inch Quantity per set 8 Product Range Wera Zyklop n: WERA Kraftform Kompakt Zyklop MS1 ratchet set metal/speed 1/4" 8-piece - 05135949001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Compact Ratchet set with 2 1/4" ratchets, Zyklop Speed and Zyklop Metal with switchover lever as well as 6 accessories. Zyklop Speed ratchet with flywheel design and easy-to-grip, free-turning sleeve for high working speeds; freely pivoting ratchet head; predefined locking at 0° and 90° to the left and right as well as 15° from 90° inwards; can be used as a conventional screwdriver in its 0° position; secure locking of the sockets also in the screwdriving position; left/right switchover; fine-toothing; small return angle of 5°; multi-component Kraftform handle for low-fatigue working. Zyklop Metal ratchet with switchover lever; Zyklop Metal ratchet with switchover lever; slim design for work in even very confined spaces; the 72 fine-pitched teeth allow a small return angle of 5°; switchover lever for convenient direction change; secure socket locking function; forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life; incredibly compact arrangement: many tools in a minimum of space; extremely compact textile box that is very robust and durable; can be positioned upright in workshop shelf for tidy storage; can be set down on sensitive surfaces thanks to the textile outer material; low weight and volume for simplified mobility. Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions Extremely slim Zyklop Metal ratchet with long lever Return angle of only 5° Convenient direction change thanks to switchover lever Set in robust textile box 8-piece set; in surface-protecting, compact textile box, highly robust; low volume and weight for simplified mobility.1 Zyklop Speed ratchet with 1/4" drive, 1 Zyklop Metal ratchet with switch lever and 1/4" drive, 1 Zyklop extension (long) with rapid spin sleeve and flexible lock system, 2 Zyklop extensions (short and long) with rapid spin sleeve, 1 adaptor with rapid change chuck, 1 "Wobble" extension, 1 universal joint. Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery Kraftform Kompakt Zyklop MS1 Metal/Speed 1/4", 8 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 1x 8004 A Zyklop Metal Ratchet with switch lever and 1/4" drive: 1/4" x 141 mm 1x 8796 LA Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 LA Zyklop extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 1x 8795 A Zyklop universal joint, 1/4": 1/4" x 35.5 mm kts: ratchet set metal/speed 1/4" 8-piece kpn: Kraftform Kompakt Zyklop MS1 kpn_dash: kpn_clear: KraftformKompaktZyklopMS1 bkpn: WERA Kraftform Kompakt Zyklop MS1 bkpn_clear: WERA KraftformKompaktZyklopMS1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05135949001 sr_ns: WERA05135949001
r: 03166850 p: 60.991 pid: 31376 b: WERA q: 1 st: 1 lt: 1 ean: 4013288214874 sr: WERA 05023452001 sr_no_br: 05023452001 sr_no_br_cl: 05023452001 sr_cl: WERA05023452001 sr_dash: sold: 1280.811 p_range: none type: standard act: 1 avo: 1 av: Min. head size 10 mm Max. head size 45 mm Type of drive profile Torx Quantity per set 7 n: WERA 467/7 HF Set 1 screwdriver set T-handle Torx screwdriver with grip function 7-piece - 05023452001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description T-handle screwdrivers: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the TORX® screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application TORX®, with holding function on the long arm for TORX® screws as per specification "Acument Intellectual Properties" Design With Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamping. 7-piece set and 2 racks in display carton Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Including useful rack for well-arranged storage of the screwdrivers. ds: dsc: Scope of delivery 467/7 TORX® HF Set 1 screwdriver set T-handle TORX® screwdrivers with holding function, 7 pieces 7x 467 TORX® HF T-handle screwdriver with holding function: TX 10x100 mm, TX 15x100 mm, TX 20x100 mm, TX 25x100 mm, TX 30x200 mm, TX 40x200 mm, TX 45x200 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set T-handle Torx screwdriver with grip function 7-piece kpn: 467/7 HF Set 1 kpn_dash: kpn_clear: 4677HFSet1 bkpn: WERA 467/7 HF Set 1 bkpn_clear: WERA 4677HFSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05023452001 sr_ns: WERA05023452001
r: 02830298 p: 29.586 pid: 42311 b: WERA q: 0 st: lt: 11 ean: 4013288168115 sr: WERA 05073645001 sr_no_br: 05073645001 sr_no_br_cl: 05073645001 sr_cl: WERA05073645001 sr_dash: sold: 1272.198 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon VDE approved No ESD No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Zyklop Mini 1 screwdriver bit set 10-piece - 05073645001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many tools in a minimum of space. The sorting according to drive and size allows rapid accessing of the bits. The Wera Mini ratchet: drop-forged, full-steel design. Fine-pitched mechanism with 60 teeth that allows a small return angle of only 6° for precise work. Simple left/right switchover. Ergonomically-designed ratchet head and lever. 1/4" Mini ratchet and tough viscous bits Ideal for working in confined spaces Tough viscous bits for universal use Use of 1/4" sockets also possible with the Wera adaptor 870/1 In handy and robust Bit-Check 9 bits, tough, for universal use, 1 Wera Bit Ratchet Zyklop Mini 1, drop-forged full steel design, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. Can also be used with 1/4" sockets by using the Wera socket adaptor 870/1. Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Simple switching between left/right operations. High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery Bit-Check 10 Zyklop Mini 1, 10 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 3x 867/1 TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 2x 840/1 Z bits: 4x25 mm, 5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Zyklop Mini 1 kpn_dash: Bit kpn_clear: BitCheck10ZyklopMini1 bkpn: WERA Bit-Check 10 Zyklop Mini 1 bkpn_clear: WERA BitCheck10ZyklopMini1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073645001 sr_ns: WERA05073645001
r: 08131779 p: 208.099 pid: 173561 b: WERA q: 0 st: lt: 28 ean: 4013288234261 sr: WERA 05006633001 sr_no_br: 05006633001 sr_no_br_cl: 05006633001 sr_cl: WERA05006633001 sr_dash: sold: 1248.594 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 23 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 interchangeable pins set, 23 pieces - 05006633001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 23-piece Kraftform Kompakt VDE set. One Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one 7516 VDE Safe-Torque Speed torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE bladeholding screwdriver. Torque wrenches and bladeholding screwdriver solely for Wera VDE blades. 20 VDE blades (each 157 mm length) with Take it easy tool finder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operated. In a robust textile box for neat storage and convenient transport. Individually tested tools as per IEC 60900 VDE bladeholding torque screwdriver 7508 VDE with 5 pre-set values (0.4; 0.8; 1.2; 1.6; 2.0 Nm) VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) Speed: Extremely fast setting of desired torque values Safe: Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation 23-piece setOne Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one Safe-Torque Speed 7516 VDE torque wrench with five selectable maximum tightening torques (2.4; 2.8; 3.2; 3.6; 4.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE Kraftform bitholding screwdriver, torque wrenches and bitholding screwdriver solely for Wera VDE blades, 20 VDE blades (each 157 mm length) with Take it easy toolfinder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operatedIn a robust textile box. Features and benefits The handle/blade system - Kraftform Kompakt VDE Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. Quick setting of the selectable tightening torque values. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The slip-over torque mechanism for clockwise/counterclockwise torque operation prevents unintentional application of excessive torque. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. ds: dsc: Scope of delivery Kraftform Kompakt VDE Safe-Torque Speed control cabinet Set 1, 23 pieces 1x 7508 VDE Kraftform Safe-Torque Speed Torque screwdriver, 0.4-2.0 Nm: 9 x 0.4 Nm x 0.8 Nm x 1.2 Nm x 1.6 Nm x 2.0 Nm x 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed Torque screwdriver, 2.4-4.0 Nm: 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S Take it easy: # 1x157 mm, # 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 2x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 30x157 mm 4x Kraftform Kompakt VDE 64 i Take it easy: 2.5x157 mm, 3x157 mm, 4x157 mm, 5x157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: interchangeable pins set, 23 pieces kpn: Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 kpn_dash: Kraftform Kompakt VDE Safe kpn_clear: KraftformKompaktVDESafeTorqueSpeedschakelkastset1 bkpn: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 bkpn_clear: WERA KraftformKompaktVDESafeTorqueSpeedschakelkastset1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006633001 sr_ns: WERA05006633001
r: 03262247 p: 78.016 pid: 70648 b: WERA q: 0 st: lt: 12 ean: 4013288222879 sr: WERA 05023471001 sr_no_br: 05023471001 sr_no_br_cl: 05023471001 sr_cl: WERA05023471001 sr_dash: sold: 1248.256 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon; Slotted VDE approved No ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 400 RA Set 1 bit holder 416 RA with T handle + 1/4" bit set 16 pieces - 05023471001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece set in a robust textile box. One 416 RA T-handle bitholding screwdriver with ratchet functionality and Rapidaptor quick-release chuck for 1/4" bits. The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. Bit holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. With Rapidaptor technology for lightning-fast bit changes. 16 tough bits, 1/4", 89 mm long, for universal use. The integrated ratchet with fine toothing ensures fast and safe working Convenient working thanks to the ratchet mechanism fully embedded in the handle Reversing lever for comfortable clockwise/counterclockwise direction change Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds 17-piece setTextile box with one 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck, 16 tough bits, 1/4", 89 mm length Features and benefits The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The integrated ratchet with fine toothing (80 teeth) and a return angle of 4.5° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The change of direction can easily be made using the reversing lever. The fast-rotating sleeve allows the tool to be guided safely while screwdriving and increases the working speed. The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 400 RA Set 1, 17 pieces 1x 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck: 1/4" x 45 mm 2x 851/4 Z bits: PH 2x89 mm, PH 3x89 mm 2x 855/4 Z bits: PZ 2x89 mm, PZ 3x89 mm 6x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm, TX 40x89 mm 5x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm, 8x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit holder 416 RA with T handle + 1/4" bit set 16 pieces kpn: Kraftform Kompakt 400 RA Set 1 kpn_dash: kpn_clear: KraftformKompakt400RASet1 bkpn: WERA Kraftform Kompakt 400 RA Set 1 bkpn_clear: WERA KraftformKompakt400RASet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05023471001 sr_ns: WERA05023471001
r: 03210965 p: 34.545 pid: 70147 b: WERA q: 0 st: lt: 10 ean: 4013288216908 sr: WERA 05020103001 sr_no_br: 05020103001 sr_no_br_cl: 05020103001 sr_cl: WERA05020103001 sr_dash: sold: 1243.62 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 13 mm Length 188 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 16 mm Product Range Wera Joker n: WERA 6004 Joker M self-adjusting spanner, 13-16 x 1/2-5/8" x 188 mm - 05020103001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Many users wish to have a universal screwdriving tool with the widest possible range of applications. It should be a single tool for multiple metric and imperial dimensions. It should automatically adjust to the different screw sizes. It should be safe to grab without damaging anything and should allow for high working speeds. With its continuous and parallel jaws the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a back-pivoting angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 is the universal screwdriving tool. Self-setting. Gripping. Spanning. For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts with wrench size 13,0; 14,0; 15,0; 16,0 (metric) and 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) Design Self-setting spanner with ratchet feature; size-adjustable open end side, parallel smooth jaws, with 30° return angle due to the corner-width rectangular prisms in the open end; hole for hanging Features and benefits Joker 6004 wrench. Self-setting - gripping - spanning With its automatically and continuously gripping parallel jaws the Joker spanner 6004 covers all dimensions in the respective field of application. The tool automatically finds the required size when placed on the bolt or screw, no setting required. The parallel smooth jaws of the Joker 6004 allow surface pressure and can thus prevent rounding of the bolt or screw head, which can occur during power transmission via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Thanks to its hole the Joker can be neatly hung on the workshop wall. ds: dsc: Scope of delivery 6004 Joker M Self-setting spanner, 13; 14; 15; 16 x 1/2; 17/32; 9/16; 19/32; 5/8" x 188 mm kts: self-adjusting spanner, 13-16 x 1/2-5/8" x 188 mm kpn: 6004 Joker M kpn_dash: kpn_clear: 6004JokerM bkpn: WERA 6004 Joker M bkpn_clear: WERA 6004JokerM c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020103001 sr_ns: WERA05020103001
r: 02688549 p: 16.363 pid: 44402 b: WERA q: 2 st: 1 lt: 1 ean: 4013288164360 sr: WERA 05073270001 sr_no_br: 05073270001 sr_no_br_cl: 05073270001 sr_cl: WERA05073270001 sr_dash: sold: 1243.588 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Overall length 159 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 10 x 159 mm - 05073270001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 10 x 159 mm kts: socket and ring spanner, 10 x 159 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073270001 sr_ns: WERA05073270001
