r: 08085428 p: 84.462 pid: 72005 b: WERA q: 0 st: lt: 11 ean: 4013288225108 sr: WERA 05150140001 sr_no_br: 05150140001 sr_no_br_cl: 05150140001 sr_cl: WERA05150140001 sr_dash: sold: 2027.088 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Quantity per module 20 Quantity per set 20 n: WERA 9740 spanner set Set 1 in foam insert 20-piece - 05150140001 cn: MIXED TOOLS MODULE cn2: MIXED TOOLS MODULE cn_clear: MIXEDTOOLSMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 9-piece Wera L-key set 950/9 Hex-Plus Multicolour 1 for hexagonal socket screws, 9-piece Wera L-key set 967/9 TX XL Multicolour 1 for TORX® screws, one 9500 magnet, one Stabila pocket tape measure (3 m). Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 18-piece L-key set (hexagonal socket screws and TORX® screws) plus one Wera magnet and one Stabila pocket tape measure (3 m), in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 44 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With the Wera magnetiser/demagnetiser: simply run the tool down the positive side of the Wera magnetiser/demagnetiser and the tool immediately becomes magnetised and is able to hold the screw securely on the blade. To demagnetise, move the tool along the negative side. ds: dsc: Scope of delivery 9740 Foam insert L-key set 1, 20 pieces 1x 950/9 Hex-Plus Multicolour 1 L-key set, metric, BlackLaser, 9 pieces 9x 950 SPKL L-key Multicolour, metric: 1.5x90 mm, 2x101 mm, 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm, 10x224 mm, 2.5x112 mm 1x 967/9 TX XL Multicolour 1 L-key set for TORX® screws, long, 9 pieces 3x 967 SXL TORX® L-key Multicolour, long: TX 8x90 mm, TX 9x101 mm, TX 10x112 mm 6x 967 SPKXL TORX® L-key Multicolour, long: TX 15x123 mm, TX 20x137 mm, TX 25x154 mm, TX 27x172 mm, TX 30x195 mm, TX 40x224 mm 1x 9500 Magnetiser SB, 64.6 mm 1x STABILA® BM 100 Pocket tape, metric scale, 3 m, item 19570, 3000 mm 1x 9840 Foam insert L-key set 1, empty, 172 x 30 x 392 mm kts: spanner set Set 1 in foam insert 20-piece kpn: 9740 kpn_dash: kpn_clear: 9740 bkpn: WERA 9740 bkpn_clear: WERA 9740 c_path: Home / Tools / Hand tools / Mixed sets / Sets in suitcase, car, cabinet, module,... / Mixed tools module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera sets in suitcase, car, cabinet, module,... / Wera mixed tools module sr_no_br_cl_ns: 05150140001 sr_ns: WERA05150140001
r: 41980042 p: 72.231 pid: 71391 b: WERA q: 0 st: lt: 15 ean: 4013288100658 sr: WERA 05074701001 sr_no_br: 05074701001 sr_no_br_cl: 05074701001 sr_cl: WERA05074701001 sr_dash: sold: 2022.468 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7441 Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 1.2-3.0 Nm - 05074701001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7441 x 1.2-3.0 Nm kts: Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 1.2-3.0 Nm kpn: 7441 kpn_dash: kpn_clear: 7441 bkpn: WERA 7441 bkpn_clear: WERA 7441 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074701001 sr_ns: WERA05074701001
r: 02121530 p: 14.545 pid: 21074 b: WERA q: 8 st: 1 lt: 1 ean: 4013288008053 sr: WERA 05042760001 sr_no_br: 05042760001 sr_no_br_cl: 05042760001 sr_cl: WERA05042760001 sr_dash: sold: 1992.665 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/2" Connection type (machine) Internal square With lock No Magnetic No Length 50 mm n: WERA 784 C adapter with 1/2" drive and quick-change function, 1/4" x 50 mm - 05042760001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Adaptor from square to hexagonal. Comes with quick-release chuck for rapid bit change. Suitable for the attachment of bits with 1/4" hexagon drive as per DIN ISO 1173-C 6.3. Drive: 1/2" square. 1/2" adaptor with quick-release chuck Suitable for bits with 1/4" hexagon drive (Wera connecting series 1) 1/2" square socket drive Equipped with ball stop groove Application Suitable for 1/4" DIN ISO 1173-C 6,3 and 5/16" DIN ISO 1173-C 8 hexagon insert bits and Wera Series 1 and 2 Design With Wera quick-release chuck Drive 1/2" female square Features and benefits For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The non-magnetic version prevents any unwanted attraction of metal filings. ds: dsc: Scope of delivery 784 C 1/2" Adaptor with quick-release chuck, 784 C/1 x 1/4" x 50 mm kts: adapter with 1/2" drive and quick-change function, 1/4" x 50 mm kpn: 784 C kpn_dash: kpn_clear: 784C bkpn: WERA 784 C bkpn_clear: WERA 784C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05042760001 sr_ns: WERA05042760001
r: 03078688 p: 25.454 pid: 31882 b: WERA q: 7 st: 1 lt: 1 ean: 4013288207517 sr: WERA 05133164001 sr_no_br: 05133164001 sr_no_br_cl: 05133164001 sr_cl: WERA05133164001 sr_dash: sold: 1985.412 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1.5 mm Max. width across flats 10 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus Multicolour 2 socket wrench set metric BlackLaser 9-piece - 05133164001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys with Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer L-keys are quickly to hand thanks to their size markings Wear-resistant size marking Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus Multicolour 2 L-key set, metric, BlackLaser, 9 pieces 9x 950 SPKS L-key Multicolour, metric: 1.5x50 mm, 2x56 mm, 2.5x63 mm, 3x71 mm, 4x80 mm, 5x90 mm, 6x100 mm, 8x112 mm, 10x125 mm kts: socket wrench set metric BlackLaser 9-piece kpn: 950/9 Hex-Plus Multicolour 2 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlusMulticolour2 bkpn: WERA 950/9 Hex-Plus Multicolour 2 bkpn_clear: WERA 9509HexPlusMulticolour2 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools allen key set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05133164001 sr_ns: WERA05133164001
r: 08085456 p: 76.198 pid: 71264 b: WERA q: 0 st: lt: 9 ean: 4013288222176 sr: WERA 05018110001 sr_no_br: 05018110001 sr_no_br_cl: 05018110001 sr_cl: WERA05018110001 sr_dash: sold: 1981.148 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 900 Set 1 impact screwdriver with bit set 19-piece - 05018110001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description The impact screwdriver 921 combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The impact wrench function offers a loosening moment of up to 25 Nm. The robust bit holder allows the mounting of different specialised bits for various screw profiles. The pound-thru blade ensures complete power transmission (zero loss). The impact wrench function and screwdriver function can be switched as required. Compact and robust interchangeable blade screwdriver set with manually activatable impact wrench function For loosening stubborn screw connections Hammer blow impulse is converted into a rotary movement with a loosening torque of approx. 25 Nm - without loss via a pound-thru blade Reversible functions: impact wrench and screwdriver Specially hardened and extra tough bits with 1/4" external hexagon drive Textile box with 1 impact screwdriver 921 and 18 impact screwdriver bits (70 mm length)19-piece set Features and benefits The 921 impact screwdriver combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The 921 impact screwdriver combines the advantages of interchangeable blade sets, chiseldrivers and manual impact wrenches. The manual impact wrench function can be switched on if required to loosen even stubborn screw connections. With the impact wrench function switched on, the hammer blow impulse is converted into a rotary movement with a loosening moment of up to 25 Nm. Power transmission without loss via a pound-thru blade. When the impact wrench function is deactivated, the hexagon bolster can be operated with a size 13 spanner for greater power transmission. The robust bit mounting is suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. The interchangeable blade system means low weight, reduced space requirement and high flexibility for the user. The Wera impact screwdriver bits are particularly suitable for use with the Wera 921 impact screwdriver. The extra tough bits stand out with their particularly long service life. Premature breakage is prevented. ds: dsc: Scope of delivery Kraftform Kompakt 900 Set 1, 19 pieces 1x 921 Kraftform Plus impact screwdriver - series 900: 1/4" x 163.5 mm 3x 851 S Phillips bits for impact screwdrivers: PH 1x70 mm, PH 2x70 mm, PH 3x70 mm 3x 855 S Pozidriv bits for impact screwdrivers: PZ 1x70 mm, PZ 2x70 mm, PZ 3x70 mm 5x 867 S TORX® bits for impact screwdrivers: TX 15x70 mm, TX 20x70 mm, TX 25x70 mm, TX 30x70 mm, TX 40x70 mm 4x 840 S Hex-Plus bits for impact screwdrivers: 3x70 mm, 4x70 mm, 5x70 mm, 6x70 mm 3x 800 S Slotted bits for impact screwdrivers: 0.8x4x70 mm, 1x5.5x70 mm, 1.2x6.5x70 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: impact screwdriver with bit set 19-piece kpn: Kraftform Kompakt 900 Set 1 kpn_dash: kpn_clear: KraftformKompakt900Set1 bkpn: WERA Kraftform Kompakt 900 Set 1 bkpn_clear: WERA KraftformKompakt900Set1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05018110001 sr_ns: WERA05018110001
r: 03334368 p: 54.38 pid: 159674 b: WERA q: 1 st: 1 lt: 1 ean: 4013288229946 sr: WERA 05006608001 sr_no_br: 05006608001 sr_no_br_cl: 05006608001 sr_cl: WERA05006608001 sr_dash: sold: 1957.68 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006608001 Kraftform Kompakt VDE 16 extra slim 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description One 817 VDE Kraftform bitholding screwdriver and 14 VDE blades with Take it easy Tool finder: Colour coding and laser-engraved size indication. With reduced blade diameter and integrated protective insulation - low-lying screw and spring elements can be easily reached and operated. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. One single-pole phase tester. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE-insulated blades 157 mm length Reduced blade diameter with integrated protective insulation for lower-lying screws Blades with Take it easy Tool finder with colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 at 10,000 V 16-piece setOne Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication, with reduced blade diameter and integrated protective insulation, low-lying screw and spring elements can be easily reached and operated, one single-pole phase testerIn a robust belt pouch Features and benefits Why is the right tool so often missing at the workplace? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry keep them with you. So for us it was a clear challenge: to develop a tool that is suitable for a whole host of applications and can be easily taken along to the workplace. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch - and they are even VDE-tested, too. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 extra slim 1 Tool finder, 16 pieces 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 extra slim 1 Tool Finder, 16-piece kpn: 05006608001 kpn_dash: kpn_clear: 05006608001 bkpn: WERA 05006608001 bkpn_clear: WERA 05006608001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006608001 sr_ns: WERA05006608001
r: 02829351 p: 111.239 pid: 44535 b: WERA q: 0 st: lt: 11 ean: 4013288168535 sr: WERA 05074750001 sr_no_br: 05074750001 sr_no_br_cl: 05074750001 sr_cl: WERA05074750001 sr_dash: sold: 1891.063 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 9 mm Bit holder type Internal hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7441 VDE Kraftform adjustable torque screwdriver 1.2-3.0 Nm - 05074750001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Torque VDE holder for safe work up to 1,000 volts. Adjustable torque value from 1.2-3.0 Nm. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. For Kraftform Kompakt VDE blades: the handle/interchangeable blade system allows a rapid exchange of the blade and thereby diverse applications. Adjustable Kraftform VDE torque holder Adjustable torque from 1.2-3.0 Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for Kraftform Kompakt VDE blades Rapid exchange of the interchangeable blades Application For Wera interchangeable Kraftform Kompakt VDE blades only Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform adjustable torque handle for Electricians The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. According to the job, the insulated inter-changeable blade with the required tipstyle, or a switch cabinet key is inserted into the clamping mechanism. By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle. ds: dsc: Scope of delivery Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm), 7441 VDE x 1.2-3.0 Nm kts: Kraftform adjustable torque screwdriver 1.2-3.0 Nm kpn: 7441 VDE kpn_dash: kpn_clear: 7441VDE bkpn: WERA 7441 VDE bkpn_clear: WERA 7441VDE c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074750001 sr_ns: WERA05074750001
r: 41071276 p: 20.495 pid: 70723 b: WERA q: 8 st: 1 lt: 1 ean: 4013288104816 sr: WERA 05022087001 sr_no_br: 05022087001 sr_no_br_cl: 05022087001 sr_cl: WERA05022087001 sr_dash: sold: 1885.54 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 1 socket wrench set metric chrome plated 9-piece - 05022087001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys with Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer High corrosion protection thanks to chrome-plating L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 1 L-key set, metric, chrome-plated, 9 pieces 9x 950 PKL L-key, metric, chrome-plated: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric chrome plated 9-piece kpn: 950/9 Hex-Plus 1 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus1 bkpn: WERA 950/9 Hex-Plus 1 bkpn_clear: WERA 9509HexPlus1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022087001 sr_ns: WERA05022087001
r: 87010155 p: 6.1 pid: 71496 b: WERA q: 12 st: 1 lt: 1 ean: 4013288012920 sr: WERA 05059615001 sr_no_br: 05059615001 sr_no_br_cl: 05059615001 sr_cl: WERA05059615001 sr_dash: sold: 1884.9 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 5 mm Drive profile size (bit) 5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 5 x 50 mm - 05059615001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 5 x 50 mm kts: hexagon bit, 5 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059615001 sr_ns: WERA05059615001
r: 41071308 p: 53.057 pid: 71896 b: WERA q: 2 st: 1 lt: 1 ean: 4013288121868 sr: WERA 05003500001 sr_no_br: 05003500001 sr_no_br_cl: 05003500001 sr_cl: WERA05003500001 sr_dash: sold: 1856.995 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size 1/4" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8000 A Zyklop Speed ratchet with 1/4" drive (1/4" x 152 mm) - 05003500001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop ratchet with 1/4" drive. The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning. Thanks to the shape of the Kraftform handle being perfectly adapted to the hand, hand injuries such as blisters and calluses are avoided. The hard materials used for the handle guarantee quick hand switching without the risk of the skin "sticking" to the handle. The softer, "non-slip" zones offer transmission of high forces without loss. For 1/4" square head socket wrench inserts as well as 1/4" connectors with square head drive, with ball lock. Combines five different types of a ratchet in one Flywheel design and easy-to-grip free-turning sleeve for very high working speeds Freely pivoting ratchet head, push button release and left/right switchover Fine-tooth design allows a small return angle of 5° Can also be used as a screwdriver Application 1/4" square sockets and 1/4" adaptors with square drive, equipped with ball lock Design Flywheel design and easy-to-grip free-turning sleeve for faster work, swivel ratchet head, defined lock positions at 0° and 90° to the left and right as well as at 15° before 90° inwards, at 0° it can be used like a conventional screwdriver, pushbutton release, left/right switchover, fine-tooth design, small return angle of 5° Handle Multi-component Kraftform handle ensures minimum fatigue Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. The ball lock holds the sockets and attachments securely, ensuring safe working. A changeover into any predefined position is completed by simply pressing the release button - this is even the case in the 90° position. ds: dsc: Scope of delivery 8000 A Zyklop Speed Ratchet with 1/4" drive, 1/4" x 152 mm kts: Zyklop Speed ratchet with 1/4" drive (1/4" x 152 mm) kpn: 8000 A kpn_dash: kpn_clear: 8000A bkpn: WERA 8000 A bkpn_clear: WERA 8000A c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003500001 sr_ns: WERA05003500001
r: 02836069 p: 59.834 pid: 41755 b: WERA q: 2 st: 1 lt: 1 ean: 4013288128041 sr: WERA 05073261001 sr_no_br: 05073261001 sr_no_br_cl: 05073261001 sr_cl: WERA05073261001 sr_dash: sold: 1854.854 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 199 mm Drive profile size 3/8" Non-sparking No VDE approved No With safety colour code 1000V No Number per blister 1 Product Range Wera Zyklop n: WERA 8000 B SB SiS Zyklop Speed ratchet with 3/8" drive (3/8" x 199 mm) - 05073261001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop ratchet with 3/8" drive. The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning. Thanks to the shape of the Kraftform handle being perfectly adapted to the hand, hand injuries such as blisters and calluses are avoided. The hard materials used for the handle guarantee quick hand switching without the risk of the skin "sticking" to the handle. The softer, "non-slip" zones offer transmission of high forces without loss. For 3/8" square head socket wrench inserts as well as 3/8" connectors with square head drive, with ball lock. Fine-tooth design allows a small return angle of 5° Freely pivoting ratchet head, push button release and left/right switchover Flywheel design and easy-to-grip free-turning sleeve for very high working speeds The Wera Zyklop Speed ratchet combines the advantages of five different types of ratchet in one. And it is a really fast mover Can also be used as a screwdriver Application 3/8" square drive sockets and 3/8" adaptors with square drive, equipped with ball lock Design Flywheel design and easy-to-grip free-turning sleeve for faster work, swivel ratchet head, defined lock positions at 0° and 90° to the left and right as well as at 15° before 90° inwards, at 0° it can be used like a conventional screwdriver, pushbutton release, left/right switchover, fine-tooth design, small return angle of 5° Handle Multi-component Kraftform handle ensures minimum fatigue Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. The ball lock holds the sockets and attachments securely, ensuring safe working. A changeover into any predefined position is completed by simply pressing the release button - this is even the case in the 90° position. ds: dsc: Scope of delivery 8000 B SB Zyklop Speed Ratchet with 3/8" drive, 3/8" x 199 mm kts: Zyklop Speed ratchet with 3/8" drive (3/8" x 199 mm) kpn: 8000 B SB SiS kpn_dash: kpn_clear: 8000BSBSiS bkpn: WERA 8000 B SB SiS bkpn_clear: WERA 8000BSBSiS c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05073261001 sr_ns: WERA05073261001
r: 03228403 p: 41.157 pid: 71623 b: WERA q: 2 st: 1 lt: 1 ean: 4013288211446 sr: WERA 05004173001 sr_no_br: 05004173001 sr_no_br_cl: 05004173001 sr_cl: WERA05004173001 sr_dash: sold: 1852.065 p_range: none type: standard act: 1 avo: 1 av: With ball head Yes Supplied in Case Quantity per set 9 n: WERA Bicycle Set 4 Allen wrench set for bicycle maintenance 9-piece - 05004173001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. For hexagonal socket screws and TORX® screws. In a robust and lightweight folding pouch. L-key set for hexagonal socket screws and TORX® screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life L-keys are quickly to hand thanks to their size markings Wear-resistant size marking In a practical, lightweight folding pouch for easy carrying 9-piece set in pouch Application Hexagonal socket screws and TORX® screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip 950 SPKL HF: Hex-Plus, ball-end hexagon on long arm, with holding function for hexagonal socket screws; 950 SPKL: Hex-Plus, ball-end hexagon on long arm, without holding function; 967 SXL HF: With holding function for TORX® screws to Acument Intellectual Properties specification. Features and benefits For the road and the workshop Compact screwdriving tool set for bicycle applications, also for mobile use. L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. For hexagon and TORX® screws. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery Bicycle Set 4, 9 pieces 2x 950 SPKL L-key Multicolour, metric: 2x101 mm, 2.5x112 mm 5x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm 2x 967 SXL HF TORX® L-key Multicolour with holding function, long: TX 10x112 mm, TX 25x154 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Allen wrench set for bicycle maintenance 9-piece kpn: Bicycle Set 4 kpn_dash: kpn_clear: BicycleSet4 bkpn: WERA Bicycle Set 4 bkpn_clear: WERA BicycleSet4 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set sr_no_br_cl_ns: 05004173001 sr_ns: WERA05004173001
r: 03032229 p: 57.685 pid: 33663 b: WERA q: 1 st: 1 lt: 1 ean: 4013288190765 sr: WERA 05003881001 sr_no_br: 05003881001 sr_no_br_cl: 05003881001 sr_cl: WERA05003881001 sr_dash: sold: 1845.92 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Type of drive profile Hexagonal Quantity per set 9 Product Range Wera Zyklop n: WERA Belt A 2 Zyklop Hexagon socket bit set with holding function and 1/4" drive 8-piece - 05003881001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Typically Wera designed robust textile belt with 8 in-hex bit-sockets taking up minimal space. A smooth Twist to Unlock mechanism ensures a secure fit and simple removal of the sockets. Comes with Take it easy Tool Finder with colour coding according to size to enable the right tool to be selected easily and quickly. Includes a snap hook for secure fastening to a belt loop or pocket. Supplied with a nonwoven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. 8-piece bit socket set on a robust textile belt, 1/4" Bit-sockets with all the advantages of the Wera bit technology Bit-sockets with holding function for screws/bolts Smooth rotary mechanism for a secure hold and easy access of the tools Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System 8-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.8 bit sockets for hexagon socket screws with 1/4" drive with holding function (sizes: 2.0 and 2.5 without holding function) and Hex-Plus high torque geometry. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily selected. Features and benefits Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt A 2 Zyklop In-Hex-Plus bit socket set with holding function, 1/4" drive, 8 pieces 2x 8740 A Zyklop bit socket, 1/4" drive: 2x28 mm, 2.5x28 mm 6x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 3x28 mm, 4x28 mm, 5x28 mm, 6x28 mm, 7x28 mm, 8x28 mm 1x Belt A (textile belt), 8 location, unloaded: 39 x 220 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: Hexagon socket bit set with holding function and 1/4" drive 8-piece kpn: Belt A 2 Zyklop kpn_dash: kpn_clear: BeltA2Zyklop bkpn: WERA Belt A 2 Zyklop bkpn_clear: WERA BeltA2Zyklop c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003881001 sr_ns: WERA05003881001
r: 08085418 p: 79.669 pid: 70284 b: WERA q: 0 st: lt: 14 ean: 4013288225320 sr: WERA 05150102001 sr_no_br: 05150102001 sr_no_br_cl: 05150102001 sr_cl: WERA05150102001 sr_dash: sold: 1832.387 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 16 n: WERA 9711 screwdriver set VDE Set 1 in foam insert 16-piece - 05150102001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 14 Wera Kraftform VDE screwdrivers as well as two screw grippers. High-quality, durable foam insert without chemical vapours Screwdriver with insulated blades for safe working up to 1,000 volt, five of which with reduced blade diameter for lower-lying screws Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 16-piece VDE-insulated screwdriver set (14 screwdrivers, 2 screw grippers) in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 46 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder. Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened. ds: dsc: Scope of delivery 9711 Foam insert VDE screwdriver set 1, 16 pieces 2x 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 165 iS PZ VDE Insulated screwdriver with reduced blade diameter for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted): # 2 x 100 mm 3x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 5x 167 i VDE Insulated screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x80 mm, TX 25x100 mm, TX 30x100 mm 1x 1440 Screw Gripper: 4.5-6 x 41 mm 1x 1442 Screw Gripper: 6.0-8.5 x 41 mm 1x 9811 Foam insert VDE screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set VDE Set 1 in foam insert 16-piece kpn: 9711 kpn_dash: kpn_clear: 9711 bkpn: WERA 9711 bkpn_clear: WERA 9711 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150102001 sr_ns: WERA05150102001
r: 02836142 p: 62.644 pid: 4545 b: WERA q: 0 st: lt: 11 ean: 4013288185457 sr: WERA 05004210001 sr_no_br: 05004210001 sr_no_br_cl: 05004210001 sr_cl: WERA05004210001 sr_dash: sold: 1816.676 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Smallest size 4 mm Connection size 1/2" Type of drive profile Hexagonal Quantity per set 6 Product Range Wera Zyklop n: WERA 8740 C HF 2 Zyklop bit socket set hexagon socket with holding function 6-piece - 05004210001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Bit socket set, hexagon socket, with holding function for particularly convenient screwdriving with reduced risk of losing the screw when addressing the workpiece. Compact textile box with high robustness, low weight and volume Bit socket (non-impact) for manual or power tool operations The holding function holds screws securely on the tool Knurling on lower socket end for more grip when used manually With Take it easy tool finder: colour coding by size 9-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility9 Zyklop bit sockets, 140 mm long, for hexagon socket screws, with 1/2" drive, with holding function Features and benefits The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. ds: dsc: Scope of delivery 8740 C HF 2 Zyklop bit socket set with 1/2" drive, with holding function, 6 pieces 6x 8740 C HF Zyklop bit socket with 1/2" drive with holding function: 4x140 mm, 5x140 mm, 6x140 mm, 7x140 mm, 8x140 mm, 10x140 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Zyklop bit socket set hexagon socket with holding function 6-piece kpn: 8740 C HF 2 kpn_dash: kpn_clear: 8740CHF2 bkpn: WERA 8740 C HF 2 bkpn_clear: WERA 8740CHF2 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004210001 sr_ns: WERA05004210001
r: 41071307 p: 181.652 pid: 71892 b: WERA q: 0 st: lt: 12 ean: 4013288121127 sr: WERA 05003535001 sr_no_br: 05003535001 sr_no_br_cl: 05003535001 sr_cl: WERA05003535001 sr_dash: sold: 1816.52 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 41 Product Range Wera Zyklop n: WERA 8100 SA 4 zyklop speed ratchet set, 1/4 drive, inch (41 pieces) - 05003535001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 41-piece Zyklop starter set with the essential ratchet components in a robust metal case: Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/4" square sockets as well as 1/4" adaptors with square drive, equipped with ball lock. Including 10 imperial Zyklop sockets, 2 Zyklop extensions with free-turning sleeve, 1 "Wobble" extension, 1 T-handle, 1 universal joint, 1 adaptor with quick-release chuck, 24 bits. Take it easy Tool Finder with colour coding according to sizes. Combines five different types of a ratchet in one Flywheel design and easy-to-grip free-turning sleeve for very high working speeds 41-piece set in a robust metal case Freely pivoting ratchet head With Take it easy tool finder: colour coding by size 41-piece set in strong metal case1 Zyklop ratchet with 1/4" drive, 10 Zyklop sockets (imperial), 2 Zyklop "flexible-lock" extensions (short and long) with free-turning sleeve, 1 "Wobble" extension, 1 sliding T-handle, 1 universal joint, 1 adaptor with quick-release chuck, 24 bits Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. Perfectly conceived in every detail: the storage case for the Zyklop Speed ratchet sets! The two-tone foam insert section means that the tools can be quickly and reliably replaced, and that missing tools can be detected immediately. The tools and their position can be clearly seen in the lid where they have been laser-etched, ensuring that they are legible even when the insert section is covered with grease, dirt or oil. Additionally, the foam section can be removed and placed in the drawer of a tool cabinet or trolley. ds: dsc: Scope of delivery 8100 SA 4 Zyklop Speed Ratchet Set, 1/4" drive, imperial, 41 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 10x 8790 HMA Zyklop 1/4" socket: 3/16"x23 mm, 7/32"x23 mm, 1/4"x23 mm, 9/32"x23 mm, 5/16"x23 mm, 11/32"x23 mm, 3/8"x23 mm, 7/16"x23 mm, 1/2"x23 mm, 9/16"x23 mm 1x 8789 A Zyklop sliding T-handle, 1/4": 1/4" x 110 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 1x 8795 A Zyklop universal joint, 1/4": 1/4" x 35.5 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 1x 8796 SA Zyklop "flexible-lock" extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 1x 8796 LA Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 8x 867/1 Z TORX® BO bits with bore hole: TX 8x25 mm, TX 9x25 mm, TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 7x 840/1 Z bits: 9/64"x25 mm, 5/64"x25 mm, 3/32"x25 mm, 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm, 7/32"x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x8x25 mm kts: zyklop speed ratchet set, 1/4 drive, inch (41 pieces) kpn: 8100 SA 4 kpn_dash: kpn_clear: 8100SA4 bkpn: WERA 8100 SA 4 bkpn_clear: WERA 8100SA4 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003535001 sr_ns: WERA05003535001
r: 03166821 p: 55.041 pid: 31916 b: WERA q: 1 st: 1 lt: 1 ean: 4013288210555 sr: WERA 05004545001 sr_no_br: 05004545001 sr_no_br_cl: 05004545001 sr_cl: WERA05004545001 sr_dash: sold: 1816.353 p_range: none type: standard act: 1 avo: 1 av: Connection size 3/8" Min. socket size 8 mm; 19 mm Quantity per set 9 n: WERA Belt B Deep 1 socket set with 3/8" drive 9-piece - 05004545001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Robust textile belt in the typical Wera design with 9 long 3/8" manual and machine socket inserts (non-impacting) in a confined space. A smoother turning mechanism ensures a secure holding and easy removal of sockets. Includes snap hook for attaching to belt loops or bags. With fleece backing and hook and loop fastener strips for easy attachment e.g. on wall, shelf, workshop trolley or the Wera 2go tool transport system. Long 3/8" manual and mechanical socket wrench inserts (ISO 2725 part 3) from Wera for use in manual and machine operation (non-impacting) even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. With hexagonal profile and ball-catching groove. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. For external hexagonal bolts and sockets. 9-piece socket set on robust textile belt 3/8" Smooth rotary mechanism for a secure hold and easy access of the tools Long 3/8" socket wrench for low-lying couplings in confined spaces und protruding thread rods Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size 9-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Smooth turning Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.9 sockets with 3/8" drive. Long design for low-profile screwdriving and protruding threaded rods, with hexagonal profile. Take it easy tool finder: Colour coding to enable the desired socket to be easily selected. Features and benefits Wera Belts Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. Knurling on lower end for more grip when used manually. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt B Deep 1 socket set, 3/8" drive, 9 pieces 9x 8790 HMB Deep 3/8" socket: 8x64 mm, 10x64 mm, 12x64 mm, 13x64 mm, 15x64 mm, 16x64 mm, 17x64 mm, 18x64 mm, 19x64 mm 1x Belt B (textile belt), 9 location, unloaded: 45 x 310 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: socket set with 3/8" drive 9-piece kpn: Belt B Deep 1 kpn_dash: kpn_clear: BeltBDeep1 bkpn: WERA Belt B Deep 1 bkpn_clear: WERA BeltBDeep1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set sr_no_br_cl_ns: 05004545001 sr_ns: WERA05004545001
r: 41071072 p: 32.892 pid: 71141 b: WERA q: 2 st: 1 lt: 1 ean: 4013288018090 sr: WERA 05018282001 sr_no_br: 05018282001 sr_no_br_cl: 05018282001 sr_cl: WERA05018282001 sr_dash: sold: 1809.06 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 932/6 Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece - 05018282001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Impact cap and bolster for the transfer of higher torque Hexagonal blade extending through the handle The Wera Black Point tip offers an exact fit and optimum corrosion protection Storage rack for wall-mounting Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The yellow soft zones of the external mantle consist of a softer material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 932/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 2x 917 SPH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 932 A Screwdriver for slotted screws: 0.6x3.5x80 mm, 0.8x4.5x90 mm, 1x5.5x100 mm, 1.2x7x125 mm kts: Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece kpn: 932/6 kpn_dash: kpn_clear: 9326 bkpn: WERA 932/6 bkpn_clear: WERA 9326 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05018282001 sr_ns: WERA05018282001
r: 03176963 p: 162.644 pid: 32988 b: WERA q: 0 st: lt: 9 ean: 4013288218926 sr: WERA 05075625001 sr_no_br: 05075625001 sr_no_br_cl: 05075625001 sr_cl: WERA05075625001 sr_dash: sold: 1789.084 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 20 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 20-100 Nm Max. tightening torque 100 Nm Product Range Wera Click-Torque n: WERA Click-Torque C 2 Push R/L adjustable torque spanner for clockwise and anticlockwise tightening, 20-100 Nm, 1/2" x 20-100 Nm - 05075625001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click torque wrench in the unmistakable Wera design. For clockwise and anti-clockwise torque-control. Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. With captive 3/4" square head insert to change direction. 1/2" square head drive with socket locking. For clockwise and counterclockwise torque operation thanks to the smooth reversing of the captive square head insert Measuring range: 20-100 Nm; precise to ± 3% as per DIN EN ISO 6789-1:2017-07 45 teeth and 1/2" square head drive with socket locking Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Application For clockwise and anti-clockwise torque-control Precision Precise to ±3 % of the set value, as per DIN EN ISO 6789-1:2017-07 Design With 1/2" square head drive with socket locking, square head insert to change the tightening direction, fine-teethed ratchet mechanics, 45 teeth; easy setting and saving of the desired torque, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the torque value is reached Handle Ergonomic 2-component handle Features and benefits Reversing with square head insert The Click-Torque torque wrench is suitable for clockwise and counterclockwise torque operation. Very smooth change of direction thanks to captive square head insert. Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. ds: dsc: Scope of delivery Click-Torque C 2 Push R/L adjustable torque wrench for clockwise and anti-clockwise torque-control, 20-100 Nm, 1/2" x 20-100 Nm kts: adjustable torque spanner for clockwise and anticlockwise tightening, 20-100 Nm, 1/2" x 20-100 Nm kpn: Click-Torque C 2 Push R/L kpn_dash: Click kpn_clear: ClickTorqueC2PushRL bkpn: WERA Click-Torque C 2 Push R/L bkpn_clear: WERA ClickTorqueC2PushRL c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075625001 sr_ns: WERA05075625001
r: 87990598 p: 18.016 pid: 75938 b: WERA q: 0 st: lt: 12 ean: 4013288101242 sr: WERA 05052504001 sr_no_br: 05052504001 sr_no_br_cl: 05052504001 sr_cl: WERA05052504001 sr_dash: sold: 1783.584 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock Yes Magnetic Yes Length 100 mm n: WERA 889/4 R Rapidaptor universal bit holder, 1/4" x 100 mm - 05052504001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Rapidaptor technology for rapid bit change Rapidaptor universal holder for bits with 1/4" hexagon drive, magnetic 1/4" hexagon drive Application Suitable for 1/4" DIN ISO 1173-C 6,3 and E 6,3 hexagon insert bits and Wera Series 1 and 4 Drive 1/4" hexagon suitable for power tools with DIN ISO 1173-F 6,3 receiver Design 1/4" hexagon with Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all, and single-hand technology, magnetic Features and benefits Bitholders, magnetic, for easier application of the screw Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. ds: dsc: Scope of delivery 889/4 R Rapidaptor Universal Bit Holder, 1/4" x 100 mm kts: Rapidaptor universal bit holder, 1/4" x 100 mm kpn: 889/4 R kpn_dash: kpn_clear: 8894R bkpn: WERA 889/4 R bkpn_clear: WERA 8894R c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052504001 sr_ns: WERA05052504001
