r: 03166719 p: 51.404 pid: 31902 b: WERA q: 1 st: 1 lt: 1 ean: 4013288214171 sr: WERA 05020230001 sr_no_br: 05020230001 sr_no_br_cl: 05020230001 sr_cl: WERA05020230001 sr_dash: sold: 2415.988 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 8 mm Max. width across flats 19 mm Supplied in Case Quantity per set 5 Product Range Wera Joker n: WERA 6003 Joker 5 Set 1 ring spanner set 5-piece - 05020230001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be "taken" every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system Combination wrench set, open side offset by 7.5°5-piece setIn robust pouch Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. ds: dsc: Scope of delivery 6003 Joker 5 Set 1 Combination wrench set, 5 pieces 5x 6003 Joker Combination wrench: 8x115 mm, 10x125 mm, 13x160 mm, 17x190 mm, 19x230 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: ring spanner set 5-piece kpn: 6003 Joker 5 Set 1 kpn_dash: kpn_clear: 6003Joker5Set1 bkpn: WERA 6003 Joker 5 Set 1 bkpn_clear: WERA 6003Joker5Set1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020230001 sr_ns: WERA05020230001
r: 41070289 p: 13.884 pid: 71066 b: WERA q: 54 st: 1 lt: 1 ean: 4013288004710 sr: WERA 05028150001 sr_no_br: 05028150001 sr_no_br_cl: 05028150001 sr_cl: WERA05028150001 sr_dash: sold: 2415.816 p_range: none type: standard act: 1 avo: 1 av: Width across flats 7 mm VDE approved No With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 265 mm Blade length 167 mm n: WERA 391 hose clamp screwdriver 7 x 167 mm - 05028150001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description High quality hose clamp screwdriver by Wera. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Flexible blade for reaching difficult-to-access places. Hexagonal anti-roll feature prevents any rolling away and handle markings make for simplified finding and sorting of the tool. Hose clamp screwdriver for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Flexible, circular blade Handle markings simplify finding and sorting of tools Application Hexagon headed bolts, screws and nuts Blade Round, flexible Design Nutdriver for hexagon head bolts Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Screwdriving can also be achieved "around the corner" with the screwdriver 392. The flexible shaft allows unfavourably-positioned screw fastenings to be reached. The ideal tool for difficult-to-access screwdriving applications e.g. in the engine compartment of a car. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 391 Hose clamp screwdriver, 7 x 167 mm kts: hose clamp screwdriver 7 x 167 mm kpn: 391 kpn_dash: kpn_clear: 391 bkpn: WERA 391 bkpn_clear: WERA 391 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05028150001 sr_ns: WERA05028150001
r: 08085423 p: 240.165 pid: 70891 b: WERA q: 0 st: lt: 11 ean: 4013288225207 sr: WERA 05150112001 sr_no_br: 05150112001 sr_no_br_cl: 05150112001 sr_cl: WERA05150112001 sr_dash: sold: 2401.65 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Quantity per set 31 Product Range Wera Zyklop n: WERA 9722 ratchet and socket set 8000 C Zyklop 1/2" Set 1 in foam insert 31-piece - 05150112001 cn: HAND SOCKET MODULE cn2: HAND SOCKET MODULE cn_clear: HANDSOCKETMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with Wera Zyklop Speed ratchet 1/2" and 30-piece accessories set. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 31-piece set Zyklop ratchet set, 1/2", in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 51 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. ds: dsc: Scope of delivery 9722 Foam insert 8000 C Zyklop 1/2" ratchet set 1, 31 pieces 1x 8000 C Zyklop Speed Ratchet with 1/2" drive: 1/2" x 277 mm 1x 8794 LC Zyklop extension with free-turning sleeve, long, 1/2": 1/2" x 250 mm 1x 8794 SC Zyklop extension with free-turning sleeve, short, 1/2": 1/2" x 125 mm 1x 8795 C Zyklop universal joint, 1/2": 1/2" x 69 mm 1x 8794 C Zyklop wobble extension, 1/2": 1/2" x 52 mm 17x 8790 HMC Zyklop socket with 1/2" drive: 10x37 mm, 11x37 mm, 12x37 mm, 13x37 mm, 14x37 mm, 15x37 mm, 16x37 mm, 17x37 mm, 18x37 mm, 19x37 mm, 20x37 mm, 21x37 mm, 22x37 mm, 24x37 mm, 27x40 mm, 30x42 mm, 32x42 mm 9x 8740 C HF Zyklop bit socket with 1/2" drive with holding function: 4x60 mm, 4x140 mm, 5x60 mm, 5x140 mm, 6x60 mm, 7x60 mm, 6x140 mm, 8x60 mm, 10x60 mm 1x 9822 Foam insert 8000 C Zyklop 1/2" ratchet set 1, empty: 344 x 30 x 392 mm kts: ratchet and socket set 8000 C Zyklop 1/2" Set 1 in foam insert 31-piece kpn: 9722 kpn_dash: kpn_clear: 9722 bkpn: WERA 9722 bkpn_clear: WERA 9722 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket module | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05150112001 sr_ns: WERA05150112001
r: 03031755 p: 38.347 pid: 31216 b: WERA q: 3 st: 1 lt: 1 ean: 4013288210371 sr: WERA 05004525001 sr_no_br: 05004525001 sr_no_br_cl: 05004525001 sr_cl: WERA05004525001 sr_dash: sold: 2377.514 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/4" Quantity per set 6 n: WERA Belt A Deep 1 socket set with 1/4" drive 9-piece - 05004525001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Robust textile belt in the typical Wera design with 9 long 1/4"manual and machine socket inserts (non-impacting) in a confined space. A smoother turning mechanism ensures a secure holding and easy removal of sockets. Includes snap hook for attaching to belt loops or bags. With fleece backing and hook and loop fastener strips for easy attachment e.g. on wall, shelf, workshop trolley or the Wera 2go tool transport system. Long 1/4" manual and mechanical socket wrench inserts (ISO 2725 part 3) from Wera for use in manual and machine operation (non-impacting) even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. With hexagonal profile and ball-catching groove. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. For external hexagonal bolts and sockets. 9-piece socket set on a robust textile belt, 1/4" Smooth rotary mechanism for a secure hold and easy access of the tools Long 1/4" socket for low-profile-fitting screw connections in tight construction spaces and for protruding threaded rods Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size 9-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Smooth turning Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.9 sockets with 1/4" drive. Long design for low-profile screwdriving and protruding threaded rods, with hexagonal profile. Take it easy tool finder: Colour coding to enable the desired socket to be easily selected. Features and benefits Wera Belts Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Knurling on lower end for more grip when used manually. The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt A Deep 1 socket set, 1/4" drive, 9 pieces 9x 8790 HMA Deep 1/4" socket: 5x50 mm, 5.5x50 mm, 6x50 mm, 7x50 mm, 8x50 mm, 10x50 mm, 11x50 mm, 12x50 mm, 13x50 mm 1x Belt A (textile belt), 9 location, unloaded: 39 x 238 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: socket set with 1/4" drive 9-piece kpn: Belt A Deep 1 kpn_dash: kpn_clear: BeltADeep1 bkpn: WERA Belt A Deep 1 bkpn_clear: WERA BeltADeep1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set sr_no_br_cl_ns: 05004525001 sr_ns: WERA05004525001
r: 02829065 p: 30.247 pid: 42637 b: WERA q: 0 st: lt: 11 ean: 4013288175373 sr: WERA 05134491001 sr_no_br: 05134491001 sr_no_br_cl: 05134491001 sr_cl: WERA05134491001 sr_dash: sold: 2329.019 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 28 mit Tasche screwdriver handle with bit magazine 6-piece - 05134491001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Wera compact tools with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit magazine integrated in the handle, for storage of 6 bits. The bayonet blade can be retracted for tight screwdriving situations. It can also be removed for machine operation.The strong permanent magnet guarantees a tight fit of the bits. Kraftform Kompakt 28 Kraftform holder with anti-roll feature, multi-component, bayonet blade and bit magazine Adaptor bayonet with stainless sleeve and strong permanent magnet Suitable for bits with 1/4" hexagon drive (Wera connecting series 1) Tough viscous bits for universal use Application Suitable for bits with 1/4" - external hexagon drive as per DIN ISO 1173-C 6,3 and Wera connection series 1 Design Attachment, telescopic, with stainless steel sleeve and strong permanent magnet Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The sets in the series Kraftform Kompakt 28 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Strong permanent magnet for secure fit of bits. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Kraftform Kompakt 28 with pouch, 6 pieces 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 2x 800/1 Z bits: 1x5.5x25 mm, 1.2x6.5x25 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with bit magazine 6-piece kpn: Kraftform Kompakt 28 mit Tasche kpn_dash: kpn_clear: KraftformKompakt28mitTasche bkpn: WERA Kraftform Kompakt 28 mit Tasche bkpn_clear: WERA KraftformKompakt28mitTasche c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05134491001 sr_ns: WERA05134491001
r: 02798478 p: 77.52 pid: 4759 b: WERA q: 0 st: lt: 11 ean: 4013288184283 sr: WERA 05004201001 sr_no_br: 05004201001 sr_no_br_cl: 05004201001 sr_cl: WERA05004201001 sr_dash: sold: 2325.6 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Smallest size 4 mm Connection size 1/2" Type of drive profile Hexagonal Quantity per set 9 Product Range Wera Zyklop n: WERA 8740 C HF 1 Zyklop bit socket set inner hexagon socket with holding function 9-piece - 05004201001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Bit socket set, hexagon socket, with holding function for particularly convenient screwdriving with reduced risk of losing the screw when addressing the workpiece. Compact textile box with high robustness, low weight and volume Bit socket (non-impact) for manual or power tool operations For hexagonal socket head screws With Take it easy tool finder: colour coding by size Knurling on lower socket end for more grip when used manually 9-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility9 Zyklop bit sockets for hexagon socket screws, with 1/2" drive, with holding function Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. ds: dsc: Scope of delivery 8740 C HF 1 Zyklop bit socket set with 1/2" drive, with holding function, 9 pieces 9x 8740 C HF Zyklop bit socket with 1/2" drive with holding function: 4x60 mm, 5x60 mm, 6x60 mm, 7x60 mm, 8x60 mm, 10x60 mm, 12x60 mm, 14x60 mm, 17x60 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Zyklop bit socket set inner hexagon socket with holding function 9-piece kpn: 8740 C HF 1 kpn_dash: kpn_clear: 8740CHF1 bkpn: WERA 8740 C HF 1 bkpn_clear: WERA 8740CHF1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004201001 sr_ns: WERA05004201001
r: 02813926 p: 30.743 pid: 18489 b: WERA q: 0 st: lt: 11 ean: 4013288180025 sr: WERA 05057421001 sr_no_br: 05057421001 sr_no_br_cl: 05057421001 sr_cl: WERA05057421001 sr_dash: sold: 2305.725 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 12 Product Range Wera Bit-Check n: WERA Bit-Check 12 Diamond 1 screwdriver bit set 12-piece - 05057421001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable Bit-Checks convince due to their functionality in a minimum of space BiTorsion bits for long service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Rapidaptor holder for rapid bit change Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 11 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. Bitholders, magnetic, for easier application of the screw The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 12 Diamond 1, 12 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 3x 851/1 BDC bits: PH 1x25 mm, 2x PH 2x25 mm 3x 855/1 BDC bits: PZ 1x25 mm, 2x PZ 2x25 mm 5x 867/1 BDC TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 12-piece kpn: Bit-Check 12 Diamond 1 kpn_dash: Bit kpn_clear: BitCheck12Diamond1 bkpn: WERA Bit-Check 12 Diamond 1 bkpn_clear: WERA BitCheck12Diamond1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057421001 sr_ns: WERA05057421001
r: 02865666 p: 139.008 pid: 32735 b: WERA q: 0 st: lt: 8 ean: 4013288193186 sr: WERA 05075605001 sr_no_br: 05075605001 sr_no_br_cl: 05075605001 sr_cl: WERA05075605001 sr_dash: sold: 2224.128 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 1/4" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque n: WERA Click-Torque A 6 torque spanner with ratchet, 2.5-25 Nm, 1/4" x 2.5-25 nm - 05075605001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand use (clockwise torque-control) and with 45-tooth reversible ratchet mechanism. With 1/4" hexagon drive, reversible ratchet, 45 teeth Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 2.5-25 Nm; precision ±4 % as per DIN EN ISO 6789-1:2017-07 With ergonomic 2-component handle suitable for right-hand use Application For clockwise torque-control Precision ± 4% of set value, as per DIN EN ISO 6789-1: 2017-07 Design With 1/4" hex drive, reversible ratchet, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits Click-Torque A 6 We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). With 1/4" hex drive. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The reversible Click-Torque wrenches are for right-handed use. ds: dsc: Scope of delivery Click-Torque A 6 torque wrench with reversible ratchet, 2.5-25 Nm, 1/4" x 2.5-25 Nm kts: torque spanner with ratchet, 2.5-25 Nm, 1/4" x 2.5-25 nm kpn: Click-Torque A 6 kpn_dash: Click kpn_clear: ClickTorqueA6 bkpn: WERA Click-Torque A 6 bkpn_clear: WERA ClickTorqueA6 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075605001 sr_ns: WERA05075605001
r: 02836356 p: 30.413 pid: 31094 b: WERA q: 14 st: 1 lt: 1 ean: 4013288144638 sr: WERA 05073230001 sr_no_br: 05073230001 sr_no_br_cl: 05073230001 sr_cl: WERA05073230001 sr_dash: sold: 2220.149 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Drive profile size 1/4" Length 180 mm Product Range Wera Zyklop n: WERA 8001 A SB Zyklop Mini 1 bit ratchet 1/4" SB with 1/4" adapter 2-piece - 05073230001 cn: BIT RATCHET cn2: BIT RATCHET cn_clear: BITRATCHET d: Product description The Wera Mini ratchet. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. The thumbwheel allows rapid fastening in confined situations when there is no space for ratcheting. Easy left/right switchover. Ergonomically designed ratchet head and lever. Suitable for 1/4" bit and socket take-up. Suitable for direct take-up of bits with 1/4" hex head drive Drop-forged, full-steel design Torque of over 65 Nm Fine-pitched ratchet mechanism and small return angle of 6 Ideal for working in confined spaces Application Suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4, Wera adaptor 870/1 for 1/4" sockets Design Drop-forged full steel design, fine-tooth ratchet mechanism, small return angle of 6°, forward and reverse drive switch Handle Kraftform handle with proven Kraftform geometry provides perfectly designed finger contact zones, ergonomic ratchet head and handle Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Thumbwheel enables rapid screwdriving, even when there isn't sufficient room for ratcheting use. Simple switching between left/right operations. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery 8001 A Zyklop Mini 1 Bit Ratchet 1/4" SB with 1/4" drive, 2 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 870/1 Adaptor: 1/4" x 25 mm kts: Zyklop Mini 1 bit ratchet 1/4" SB with 1/4" adapter 2-piece kpn: 8001 A SB kpn_dash: kpn_clear: 8001ASB bkpn: WERA 8001 A SB bkpn_clear: WERA 8001ASB c_path: Home / Our brands / Wera / Wera Ranges / Wera zyklop | Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit ratchet sr_no_br_cl_ns: 05073230001 sr_ns: WERA05073230001
r: 03041796 p: 169.256 pid: 32806 b: WERA q: 0 st: lt: 10 ean: 4013288194855 sr: WERA 05135973001 sr_no_br: 05135973001 sr_no_br_cl: 05135973001 sr_cl: WERA05135973001 sr_dash: sold: 2200.328 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD Yes Supplied in Case Quantity per set 21 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt micro 21 ESD 1 screwdriver set for precision work 21-piece - 05135973001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of<= 10 9 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform Micro ESD bit holder Holder with anti-roll feature, rotating cap and quick-release chuck Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive In a practical pouch 21-piece setPouch with 44 mm bits1 Kraftform Micro ESD bitholding screwdriver Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. ds: dsc: Scope of delivery Kraftform Kompakt Micro 21 ESD 1, 21 pieces 1x 1013 Kraftform Micro ESD Bitholding screwdriver: 97 mm 3x 851/9 C J PH bits, halfmoon: PH 000 x 44x1.5 mm, PH 00 x 44x1.8 mm, PH 0 x 44x1.8 mm 5x 867/9 C TORX® bits, halfmoon: TX 1x44 mm, TX 2x44 mm, TX 3x44 mm, TX 4x44 mm, TX 5x44 mm 4x 867/9 C IP TORX PLUS® bits: 1 IPx44 mm, 2 IPx44 mm, 3 IPx44 mm, 4 IPx44 mm 1x 867/9 IPR TORX PLUS® bits: 1 IPR x 44 x 1.5 mm 4x 872/9 bits for Microstix® screws: mx44 mm, 00x44 mm, Fx44 mm, 0x44 mm 2x 800/9 C bits: 0.23x1.5x44 mm, 0.35x2.5x44 mm 1x 869/9 Nutsetters: 2.5 x 44 mm kts: screwdriver set for precision work 21-piece kpn: Kraftform Kompakt micro 21 ESD 1 kpn_dash: kpn_clear: KraftformKompaktmicro21ESD1 bkpn: WERA Kraftform Kompakt micro 21 ESD 1 bkpn_clear: WERA KraftformKompaktmicro21ESD1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135973001 sr_ns: WERA05135973001
r: 02836604 p: 90.743 pid: 31111 b: WERA q: 1 st: 1 lt: 1 ean: 4013288173928 sr: WERA 05004048001 sr_no_br: 05004048001 sr_no_br_cl: 05004048001 sr_cl: WERA05004048001 sr_dash: sold: 2177.832 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Supplied in Case Quantity per set 29 Product Range Wera Zyklop n: WERA 8100 SB 8 zyklop metal ratchet set, shuttle lever, 3/8 drive, metric (29 -piece) - 05004048001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. Take it easy Tool Finder with colour coding according to sizes. Convenient direction change thanks to switchover lever Extremely slim ratchet with long lever Return angle of only 5° With Take it easy tool finder: colour coding by size 29-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility1 Zyklop Metal Ratchet with 3/8" drive, 9 Zyklop sockets, 1 Zyklop extension (long) with free-turning sleeve, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 16 bits Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. ds: dsc: Scope of delivery 8100 SB 8 Zyklop Metal Ratchet Set with switch lever, 3/8" drive, metric, 29 pieces 1x 8004 B Zyklop Metal Ratchet with switch lever and 3/8" drive: 3/8" x 222 mm 9x 8790 HMB Zyklop socket with 3/8" drive: 8x29 mm, 10x29 mm, 12x29 mm, 13x29 mm, 15x29 mm, 16x30 mm, 17x30 mm, 18x30 mm, 19x30 mm 1x 8794 LB Zyklop extension with free-turning sleeve, long, 3/8": 3/8" x 200 mm 1x 8794 B Zyklop wobble extension, 3/8": 3/8" x 76 mm 1x 8784 B1 Zyklop bit adaptor, 3/8": 1/4" x 3/8" x 44 mm 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 6x 867/1 TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 27x25 mm, TX 30x25 mm, TX 40x25 mm 5x 840/1 Z bits: 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm, 8x25 mm kts: zyklop metal ratchet set, shuttle lever, 3/8 drive, metric (29 -piece) kpn: 8100 SB 8 kpn_dash: kpn_clear: 8100SB8 bkpn: WERA 8100 SB 8 bkpn_clear: WERA 8100SB8 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004048001 sr_ns: WERA05004048001
r: 02865680 p: 1080.826 pid: 32750 b: WERA q: 0 st: lt: 15 ean: 4013288193261 sr: WERA 05075630001 sr_no_br: 05075630001 sr_no_br_cl: 05075630001 sr_cl: WERA05075630001 sr_dash: sold: 2161.652 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 200 Nm Drive profile size 3/4" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 200-1000 Nm Max. tightening torque 1000 Nm Product Range Wera Click-Torque n: WERA Click-Torque E 1 torque spanner with changeover ratchet, 200-1000 Nm, 3/4" x 200-1000 Nm - 05075630001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand use (clockwise torque-control) and with 45-tooth reversible ratchet mechanism. With 3/4" square drive, reversible ratchet, 45 teeth Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 200-1000 Nm; precise to ± 3% as per DIN EN ISO 6789-1:2017-07 With ergonomic 2-component handle suitable for right-hand use Application For clockwise torque-control Precision ± 3% of set value, as per DIN EN ISO 6789-1: 2017-07 Design With 3/4" square drive, reversible ratchet, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The reversible Click-Torque wrenches are for right-handed use. ds: dsc: Scope of delivery Click-Torque E 1 torque wrench with reversible ratchet, 200-1000 Nm, 3/4" x 200-1000 Nm kts: torque spanner with changeover ratchet, 200-1000 Nm, 3/4" x 200-1000 Nm kpn: Click-Torque E 1 kpn_dash: Click kpn_clear: ClickTorqueE1 bkpn: WERA Click-Torque E 1 bkpn_clear: WERA ClickTorqueE1 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075630001 sr_ns: WERA05075630001
r: 02836333 p: 82.479 pid: 31644 b: WERA q: 1 st: 1 lt: 1 ean: 4013288162403 sr: WERA 05133862001 sr_no_br: 05133862001 sr_no_br_cl: 05133862001 sr_cl: WERA05133862001 sr_dash: sold: 2144.454 p_range: KLIUM_PRODUCT_RANGE_308 type: standard act: 1 avo: 1 av: Length 341 mm Drive profile size 1/4" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Koloss n: WERA 8002 C Koloss All-inclusive set with 1/2" drive 5-piece - 05133862001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description The ratchet that can also be safely and officially used as a hammer. The KOLOSS is a reversible, heavy-duty ratchet that can be used with a load of at least 600 Newton metres. The dual ratchet teeth and the minimum return angle of only 6° ensure rapid and precise screwdriving even in confined situations. And the best thing: absolutely no impact on the hammer faces, however hard, can destroy the ratchet mechanism. Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads; take-up for KOLOSS extension 8780 C and KOLOSS centring pin 8781 C at end of handle. Also included in the set: 1 pad to protect materials and surface areas, 1 Koloss extension for the transfer of even more torque, 1 unlocking pin and 1 holster - so the Koloss can always be at hand. For loads of at least 600 Newton metres Push-through square drive for right/left switchover Including hammer function Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads Fine-pitched ratchet mechanism, small return angle of 6° Application Ratchet function for 1/2" square sockets and 1/2" adaptors with square drive, equipped with ball lock, hammer function e.g. to align work pieces Design Push-through square drive for forward and reverse operation, fine-tooth ratchet mechanism, small return angle of 6°, can transfer at least 600 Nm of torque, tubular shaft to minimise impact vibrations, drop-forged hammer head, positively pinned, ground striking face Handle Multi-component Kraftform handle for optimum pressure, impact and tensile loads, handle end designed for connection of Koloss extension 8780 C and Koloss centering pin 8781 C Features and benefits The heavy-duty ratchet that can also be safely used as a hammer. Typical fields of application are mechani-cal engineering, boatbuilding, mining, aircraft construction, bridge building, commercial vehicle construction and maintenance, railway and road construction and maintenance, industrial plant and equipment construction, high-bay warehouse construction, petroleum industry and many more. Non-removable sealed and hardened square drive for tough jobs. Changing the ratchet direction using a hardened push-through square drive ensures great resilience, since there is no susceptible switching mechanism that could be damaged by hammer blows. This is far more robust than a right/left switch. Tubular shaft minimises impact vibrations. Used with rubber pad attachments to protect materials and surfaces. The drop-forged hammer head is permanently pinned to the shaft in a form-fit joint. This guarantees an almost non-detachable positioning of the hammer head on the handle. Gives the robust 30 saw teeth the precision engineering effect of 60 fine teeth with a 6° return angle. ds: dsc: Scope of delivery 8002 C Koloss All Inclusive Set with 1/2" drive, 5 pieces 1x 8002 C Koloss 1/2": 1/2" x 341 mm 1x 8782 C Koloss pad: 50 mm 1x 8780 C Koloss extension: 341 x 137 mm 1x 8000 E Unlocking pin: 40.5 mm 1x Holster: 175 x 75 mm kts: All-inclusive set with 1/2" drive 5-piece kpn: 8002 C Koloss kpn_dash: kpn_clear: 8002CKoloss bkpn: WERA 8002 C Koloss bkpn_clear: WERA 8002CKoloss c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera koloss sr_no_br_cl_ns: 05133862001 sr_ns: WERA05133862001
r: 08085421 p: 213.884 pid: 69934 b: WERA q: 0 st: lt: 14 ean: 4013288225139 sr: WERA 05150110001 sr_no_br: 05150110001 sr_no_br_cl: 05150110001 sr_cl: WERA05150110001 sr_dash: sold: 2138.84 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Mixed Connection size 1/4" Smallest size 4 mm Largest size 15 mm Product Range Wera Zyklop n: WERA 9720 bit set 1/4" with 8000 A Zyklop ratchet in foam insert 37-piece - 05150110001 cn: HAND SOCKET MODULE cn2: HAND SOCKET MODULE cn_clear: HANDSOCKETMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with one Wera Zyklop Speed ratchet 1/4" and a 36-piece accessories set. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 37-piece Zyklop ratchet set, 1/4", in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 40 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. ds: dsc: Scope of delivery 9720 Foam insert 8000 A Zyklop 1/4" ratchet set 1, 37 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 1x 8794 LA Zyklop extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 1x 8795 A Zyklop universal joint, 1/4": 1/4" x 35.5 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 14x 8790 HMA Zyklop 1/4" socket: 4x23 mm, 4.5x23 mm, 5x23 mm, 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 9x23 mm, 10x23 mm, 11x23 mm, 12x23 mm, 13x23 mm, 14x23 mm, 15x23 mm 9x 8767 A HF TORX® Zyklop bit socket with holding function, 1/4" drive: TX 8x28 mm, TX 9x28 mm, TX 10x28 mm, TX 15x28 mm, TX 20x28 mm, TX 25x28 mm, TX 27x28 mm, TX 30x28 mm, TX 40x28 mm 9x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 3x28 mm, 4x28 mm, 4x100 mm, 5x28 mm, 5x100 mm, 6x28 mm, 6x100 mm, 8x28 mm, 8x100 mm 1x 9820 Foam insert 8000 A Zyklop 1/4" ratchet set 1, empty: 172 x 30 x 392 mm kts: bit set 1/4" with 8000 A Zyklop ratchet in foam insert 37-piece kpn: 9720 kpn_dash: kpn_clear: 9720 bkpn: WERA 9720 bkpn_clear: WERA 9720 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket module | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05150110001 sr_ns: WERA05150110001
r: 03016424 p: 51.074 pid: 70692 b: WERA q: 2 st: 1 lt: 1 ean: 4013288210708 sr: WERA 05004565001 sr_no_br: 05004565001 sr_no_br_cl: 05004565001 sr_cl: WERA05004565001 sr_dash: sold: 2094.034 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/2" Quantity per set 17 n: WERA Belt C Deep 1 socket set 1/2 drive 6-piece - 05004565001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Robust textile belt in the typical Wera design with 6 long 1/2" manual and machine socket inserts (non-impacting) in a confined space. A smoother turning mechanism ensures a secure holding and easy removal of sockets. Includes snap hook for attaching to belt loops or bags. With fleece backing and hook and loop fastener strips for easy attachment e.g. on wall, shelf, workshop trolley or the Wera 2go tool transport system. Long 1/2"manual and mechanical socket wrench inserts (ISO 2725 part 3) from Wera for use in manual and machine operation (non-impacting) even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. With hexagonal profile and ball-catching groove. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. For external hexagonal bolts and sockets. 6-piece socket set on robust textile belt, 1/2" Smooth rotary mechanism for a secure hold and easy access of the tools Long 1/2" socket wrenches for low-lying couplings in confined spaces und protruding thread rods Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size 6-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Smooth turning Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.6 sockets with 1/2" drive. Long design for low-profile screwdriving and protruding threaded rods, with hexagonal profile. Take it easy tool finder: Colour coding to enable the desired socket to be easily selected. Features and benefits Wera Belts Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Knurling on lower end for more grip when used manually. The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt C Deep 1 socket set, 1/2" drive, 6 pieces 6x 8790 HMC Deep socket with 1/2" drive: 10x83 mm, 13x83 mm, 15x83 mm, 16x83 mm, 17x83 mm, 19x83 mm 1x Belt C (textile belt), 6 location, unloaded: 45 x 275 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: socket set 1/2 drive 6-piece kpn: Belt C Deep 1 kpn_dash: kpn_clear: BeltCDeep1 bkpn: WERA Belt C Deep 1 bkpn_clear: WERA BeltCDeep1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set sr_no_br_cl_ns: 05004565001 sr_ns: WERA05004565001
r: 03166846 p: 52.231 pid: 33838 b: WERA q: 1 st: 1 lt: 1 ean: 4013288214829 sr: WERA 05023450001 sr_no_br: 05023450001 sr_no_br_cl: 05023450001 sr_cl: WERA05023450001 sr_dash: sold: 2089.24 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. head size 3 mm Max. head size 10 mm Type of drive profile Hexagonal Quantity per set 7 Product Range Wera Hex-Plus n: WERA 454/7 HF Set 1 screwdriver set T-handle screwdriver Hex-Plus with grip function 7-piece - 05023450001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application Hexagon socket screws, with holding function on the long arm from size 3 Design With Take it easy tool finder: colour coding according to profile (blue = hexagon socket) and size stamp. 7-piece set and 2 racks in display carton Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Including useful rack for well-arranged storage of the screwdrivers. ds: dsc: Scope of delivery 454/7 HF Set 1 screwdriver set T-handle screwdrivers Hex-Plus with holding function, 7 pieces 1x 454 T-handle hexagon screwdriver Hex-Plus: 2.5 x 100 mm 6x 454 HF T-handle hexagon screwdriver Hex-Plus with holding function: 3x100 mm, 4x100 mm, 5x150 mm, 6x150 mm, 8x200 mm, 10x200 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set T-handle screwdriver Hex-Plus with grip function 7-piece kpn: 454/7 HF Set 1 kpn_dash: kpn_clear: 4547HFSet1 bkpn: WERA 454/7 HF Set 1 bkpn_clear: WERA 4547HFSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023450001 sr_ns: WERA05023450001
r: 87010054 p: 13.884 pid: 19363 b: WERA q: 8 st: 1 lt: 1 ean: 4013288012272 sr: WERA 05051205001 sr_no_br: 05051205001 sr_no_br_cl: 05051205001 sr_cl: WERA05051205001 sr_dash: sold: 2082.6 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Overall length 120 mm VDE approved No With safety colour code 1000V ESD No Non-sparking No Bit holder type Internal hexagon n: WERA 812/1 bit holder with strong permanent magnet, 1/4" x 120 mm - 05051205001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description High quality bit holder with strong, permanent magnet that holds the bits absolutely securely. Kraftform handle for pleasant, ergonomic working. Kraftform Plus: Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Bit holder for bits with 1/4" hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Hexagonal blade, chrome-plated Stainless sleeve with strong permanent magnet for secure fit of the bit Application Suitable for 1/4" DIN ISO 1173-C 6.3 hexagon insert bits and Wera Series 1 Blade Hexagon Design Strong permanent magnet, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1; 1/4" hexagonal bit mounting, magnetic. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 812/1 Bitholding screwdriver with strong permanent magnet, 1/4" x 120 mm kts: bit holder with strong permanent magnet, 1/4" x 120 mm kpn: 812/1 kpn_dash: kpn_clear: 8121 bkpn: WERA 812/1 bkpn_clear: WERA 8121 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools bit screwdriver sr_no_br_cl_ns: 05051205001 sr_ns: WERA05051205001
r: 02836072 p: 57.685 pid: 43837 b: WERA q: 2 st: 1 lt: 1 ean: 4013288128058 sr: WERA 05073262001 sr_no_br: 05073262001 sr_no_br_cl: 05073262001 sr_cl: WERA05073262001 sr_dash: sold: 2076.66 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 277 mm Drive profile size 1/4" Non-sparking No VDE approved No With safety colour code 1000V No Number per blister 1 Product Range Wera Zyklop n: WERA 8000 C SB SiS Zyklop Speed ratchet with 1/2" drive (1/2" x 277 mm) - 05073262001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop ratchet with 1/2" drive. The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning. Thanks to the shape of the Kraftform handle being perfectly adapted to the hand, hand injuries such as blisters and calluses are avoided. The hard materials used for the handle guarantee quick hand switching without the risk of the skin "sticking" to the handle. The softer, "non-slip" zones offer transmission of high forces without loss. For 1/2" square head socket wrench inserts as well as 1/2" connectors with square head drive, with ball lock. Fine-tooth design allows a small return angle of 5° Freely pivoting ratchet head, push button release and left/right switchover Flywheel design and easy-to-grip free-turning sleeve for very high working speeds The Wera Zyklop Speed ratchet combines the advantages of five different types of ratchet in one. And it is a really fast mover Can also be used as a screwdriver Application 1/2" square drive sockets and 1/2" adapters with square drive, equipped with ball lock Design Flywheel design and easy-to-grip free-turning sleeve for faster work, swivel ratchet head, defined lock positions at 0° and 90° to the left and right as well as at 15° before 90° inwards, at 0° it can be used like a conventional screwdriver, pushbutton release, left/right switchover, fine-tooth design, small return angle of 5° Handle Multi-component Kraftform handle ensures minimum fatigue Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. The ball lock holds the sockets and attachments securely, ensuring safe working. A changeover into any predefined position is completed by simply pressing the release button - this is even the case in the 90° position. ds: dsc: Scope of delivery 8000 C SB Zyklop Speed Ratchet with 1/2" drive, 1/2" x 277 mm kts: Zyklop Speed ratchet with 1/2" drive (1/2" x 277 mm) kpn: 8000 C SB SiS kpn_dash: kpn_clear: 8000CSBSiS bkpn: WERA 8000 C SB SiS bkpn_clear: WERA 8000CSBSiS c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05073262001 sr_ns: WERA05073262001
r: 02814989 p: 16.363 pid: 17206 b: WERA q: 13 st: 1 lt: 1 ean: 4013288179838 sr: WERA 05057434001 sr_no_br: 05057434001 sr_no_br_cl: 05057434001 sr_cl: WERA05057434001 sr_dash: sold: 2045.375 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Slotted; Hexagon Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 Metal 1 screwdriver bit set, 30-piece - 05057434001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet for the take-up of bits with 1/4" hexagon head drive. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage. Hex-Plus allows socket head screws to live longer Upright positionable Bit-Checks convince due to their functionality in a minimum of space Particularly for metal applications Tough viscous bits for universal use Universal holder with stainless sleeve 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 29 bits, tough, for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery Bit-Check 30 Metal 1, 30 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 8x 851/1 Z bits: 3x PH 1x25 mm, 3x PH 2x25 mm, 2x PH 3x25 mm 9x 855/1 Z bits: 3x PZ 1x25 mm, 3x PZ 2x25 mm, 3x PZ 3x25 mm 6x 867/1 TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 3x 840/1 Z bits: 4x25 mm, 5x25 mm, 6x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 Metal 1 kpn_dash: Bit kpn_clear: BitCheck30Metal1 bkpn: WERA Bit-Check 30 Metal 1 bkpn_clear: WERA BitCheck30Metal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057434001 sr_ns: WERA05057434001
r: 02688541 p: 18.677 pid: 45941 b: WERA q: 9 st: 1 lt: 1 ean: 4013288164377 sr: WERA 05073273001 sr_no_br: 05073273001 sr_no_br_cl: 05073273001 sr_cl: WERA05073273001 sr_dash: sold: 2035.793 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 13 mm Overall length 177 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 13 x 177 mm - 05073273001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 13 x 177 mm kts: socket and ring spanner, 13 x 177 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073273001 sr_ns: WERA05073273001
