r: 03229736 p: 63.801 pid: 71803 b: WERA q: 0 st: lt: 12 ean: 4013288188250 sr: WERA 05074720010 sr_no_br: 05074720010 sr_no_br_cl: 05074720010 sr_cl: WERA05074720010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform torque screwdriver 2.5-11.5 in. lbs. - 05074720010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs. kts: Kraftform torque screwdriver 2.5-11.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720010 sr_ns: WERA05074720010
r: 02012167 p: 59.669 pid: 42388 b: WERA q: 0 st: lt: 12 ean: 4013288099136 sr: WERA 05028046001 sr_no_br: 05028046001 sr_no_br_cl: 05028046001 sr_cl: WERA05028046001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size IP20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 IP torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm - 05028046001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX PLUS® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform pistol handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application TORX PLUS® socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 IP TORX PLUS® Torque-indicator, pistol handle, 20 IP x 5.0 Nm kts: torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm kpn: 300 IP kpn_dash: kpn_clear: 300IP bkpn: WERA 300 IP bkpn_clear: WERA 300IP c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05028046001 sr_ns: WERA05028046001
r: 02716304 p: 59.173 pid: 52034 b: GEDORE q: 0 st: lt: 6 ean: 4010886950050 sr: GEDORE 2927802 sr_no_br: 2927802 sr_no_br_cl: 2927802 sr_cl: GEDORE2927802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,2 Nm Adjustable torque range 0,2-1,5 Nm Max. tightening torque 1,5 Nm n: GEDORE ESD 150 FH torque screwdriver type PGNE FS 1/4" 0.2-1.5 Nm - 2927802 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Application Controlled screw tightening in the range 0.2 - 1.5 Nm Series assembly with constant tightening value Electronics industry, precision mechanics and industrial production Design Fixed adjustable torque spanner - without scale With 1/4" hexagonal socket for 1/4" bits according to DIN 3126 - C 6,3 Classified according to DIN EN ISO 67892003 Type II Class F, with traceable manufacturer's certificate Accuracy +/- 6 % tolerance of the set scale value Conforms to EPA (Electrostatic Protected Area), for use in electrostatically sensitive applications Precision ball mechanism for controlled clockwise and anticlockwise tightening Precision mechanism glides on noticeably when set value is reached Automatic return to home position Fatigue-free working is achieved by an ergonomic handle and quiet shut-off A calibration sticker can be applied in the designated place RAHSOL DREMOTEC can be supplied with a fixed factory setting or set manually using a suitable testing device If fixed factory setting is required, please state Nm value when ordering (price on request) Scope of delivery Torque screwdriver Type ESD FH Models 4.5 and 13.5 with additional transverse handle for easier work Test certificate in accordance with DIN EN ISO 6789-22017 Supplied in sturdy cardboard packaging ds: dsc: Scope of delivery Torque screwdriver Type ESD FH,Models 4.5 and 13.5 with additional transverse handle for easier work,Test certificate according to DIN EN ISO 6789-2:2017,Delivery in sturdy carton packaging kts: torque screwdriver type PGNE FS 1/4" 0.2-1.5 Nm kpn: ESD 150 FH kpn_dash: kpn_clear: ESD150FH bkpn: GEDORE ESD 150 FH bkpn_clear: GEDORE ESD150FH c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque screwdrivers / Gedore torque screwdriver sr_no_br_cl_ns: 2927802 sr_ns: GEDORE2927802
r: 02815104 p: 54.38 pid: 44444 b: WERA q: 0 st: lt: 8 ean: 4013288099150 sr: WERA 05027913001 sr_no_br: 05027913001 sr_no_br_cl: 05027913001 sr_cl: WERA05027913001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 4 mm ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 Hex torque indicator with pistol grip, 4 x 5.0 Nm - 05027913001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for hexagon socket screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application Hexagon socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Hex-Plus, Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 Hex Torque-indicator, pistol handle, 4 mm x 5.0 Nm kts: torque indicator with pistol grip, 4 x 5.0 Nm kpn: 300 Hex kpn_dash: kpn_clear: 300Hex bkpn: WERA 300 Hex bkpn_clear: WERA 300Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027913001 sr_ns: WERA05027913001
r: 02953265 p: 49.256 pid: 32772 b: WERA q: 0 st: lt: 15 ean: 4013288208842 sr: WERA 05005081001 sr_no_br: 05005081001 sr_no_br_cl: 05005081001 sr_cl: WERA05005081001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 5 mm Drive type External hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 Hex torque indicator 5 x 5.0 Nm - 05005081001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for hexagon sockets. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application Hexagon socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Hex-Plus, brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Torque-indicator with pre-set and tamperproof torque value Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 Hex Torque-indicator, 5 mm x 5.0 Nm kts: torque indicator 5 x 5.0 Nm kpn: 400 Hex kpn_dash: kpn_clear: 400Hex bkpn: WERA 400 Hex bkpn_clear: WERA 400Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005081001 sr_ns: WERA05005081001
r: 41973941 p: 46.239 pid: 71384 b: WERA q: 0 st: lt: 12 ean: 4013288102942 sr: WERA 05074720001 sr_no_br: 05074720001 sr_no_br_cl: 05074720001 sr_cl: WERA05074720001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. - 05074720001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7465 x 2.5 in. lbs. kts: Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720001 sr_ns: WERA05074720001
r: 02953272 p: 43.14 pid: 31170 b: WERA q: 0 st: lt: 15 ean: 4013288208828 sr: WERA 05005091001 sr_no_br: 05005091001 sr_no_br_cl: 05005091001 sr_cl: WERA05005091001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size T25 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 TX torque indicator TX 25 x 5.0 Nm - 05005091001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for TORX® screws. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application TORX® socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Screwdrivers with T-handle Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. ds: dsc: Scope of delivery 400 TX Torque-indicator, TX 25 x 5.0 Nm kts: torque indicator TX 25 x 5.0 Nm kpn: 400 TX kpn_dash: kpn_clear: 400TX bkpn: WERA 400 TX bkpn_clear: WERA 400TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005091001 sr_ns: WERA05005091001
r: 02953269 p: 43.14 pid: 31124 b: WERA q: 0 st: lt: 15 ean: 4013288208811 sr: WERA 05005090001 sr_no_br: 05005090001 sr_no_br_cl: 05005090001 sr_cl: WERA05005090001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Drive size T20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4 Nm Max. tightening torque 4 Nm n: WERA 400 TX torque indicator TX 20 x 4.0 Nm - 05005090001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for TORX® screws. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application TORX® socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Screwdrivers with T-handle Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. ds: dsc: Scope of delivery 400 TX Torque-indicator, TX 20 x 4.0 Nm kts: torque indicator TX 20 x 4.0 Nm kpn: 400 TX kpn_dash: kpn_clear: 400TX bkpn: WERA 400 TX bkpn_clear: WERA 400TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005090001 sr_ns: WERA05005090001
