Torque screwdrivers tighten screws and bolts to exactly the preset torque, so connections do not stay too loose or, the other way round, get damaged. That makes this tool indispensable for assembly work where a controlled tightening value matters, from fine electronics to construction. Set the desired torque, tighten until the mechanical or audible click and repeat the operation with the same accuracy.
The range runs from fine adjustable versions with a micrometer scale for low torque values to sturdier models that handle heavier connections. If you work a lot with static-sensitive components, choose an ESD version that safely drains charges. A quick-change holder lets you swap bits in seconds without tools. When choosing, look at the torque range, the setting accuracy and the type of holder that suits your bits.
Brands such as Wera, Wiha, Gedore, Bahco and Facom supply versions for both service work and the bench. That way you tighten every connection reproducibly and reliably, every time within specification.
r: 02836005 p: 98.842 pid: 42174 b: WERA q: 0 st: lt: 11 ean: 4013288106995 sr: WERA 05074734001 sr_no_br: 05074734001 sr_no_br_cl: 05074734001 sr_cl: WERA05074734001 sr_dash: sold: 70474.346 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7446 ESD Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 11-29 in. lbs. - 05074734001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (2.5-29.0 in.lbs.) with Rapidaptor quick-release chuck, 7446 ESD x 11-29 in. lbs. kts: Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 11-29 in. lbs. kpn: 7446 ESD kpn_dash: kpn_clear: 7446ESD bkpn: WERA 7446 ESD bkpn_clear: WERA 7446ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074734001 sr_ns: WERA05074734001
r: 02836013 p: 70.743 pid: 42154 b: WERA q: 0 st: lt: 12 ean: 4013288179487 sr: WERA 05074840001 sr_no_br: 05074840001 sr_no_br_cl: 05074840001 sr_cl: WERA05074840001 sr_dash: sold: 9125.847 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074840001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 ESD x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840001 sr_ns: WERA05074840001
r: 03229728 p: 83.636 pid: 71042 b: WERA q: 0 st: lt: 12 ean: 4013288188243 sr: WERA 05074842010 sr_no_br: 05074842010 sr_no_br_cl: 05074842010 sr_cl: WERA05074842010 sr_dash: sold: 4767.252 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 ESD Kraftform torque screwdriver 1.2-3.0 Nm - 05074842010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 ESD x 1.2-3.0 Nm kts: Kraftform torque screwdriver 1.2-3.0 Nm kpn: 7461 ESD kpn_dash: kpn_clear: 7461ESD bkpn: WERA 7461 ESD bkpn_clear: WERA 7461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074842010 sr_ns: WERA05074842010
r: 08073692 p: 82.479 pid: 31198 b: WIHA q: 0 st: lt: 8 ean: 4010995264611 sr: WIHA 26461 sr_no_br: 26461 sr_no_br_cl: 26461 sr_cl: WIHA26461 sr_dash: sold: 2061.975 p_range: KLIUM_PRODUCT_RANGE_346 type: standard act: 1 avo: 1 av: ESD No VDE approved No Product Range Wiha TorqueVario n: WIHA 28521100 TorqueVario-S torque screwdriver variable 0.4-1.0 Nm - 26461 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Meets your requirements: Variably adjustable torque covers a wide range of applications. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Lowers your costs: The correct torque protects you from warranty claims. Product dimensions: 195 x 35 x 35 mm (LxWxD) Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade. Accuracy: ±6%, tracing to national standards (see table for other tolerances). Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Handle: Ergonomic multi-component handle, particulary light and compact. Handle: Handle sizes proportioned to optimise torque setting. Handle: Audible and perceptible click when the pre-set torque has been attained. Handle: Compatible with all blades of the 2859. Variably adjustable torque from 0.8 - 5.0 Nm Acoustic and physically perceptible triggering signal protects against damage to materials and rework Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs DIN EN ISO 6789. ds: dsc: kts: TorqueVario-S torque screwdriver variable 0.4-1.0 Nm kpn: 28521100 kpn_dash: kpn_clear: 28521100 bkpn: WIHA 28521100 bkpn_clear: WIHA 28521100 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquevario sr_no_br_cl_ns: 26461 sr_ns: WIHA26461
r: 02014816 p: 198.181 pid: 32203 b: GEDORE q: 2 st: 1 lt: 1 ean: 4002805921098 sr: GEDORE 1400169 sr_no_br: 1400169 sr_no_br_cl: 1400169 sr_cl: GEDORE1400169 sr_dash: sold: 1981.81 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Adjustable torque range 1,2-6 Nm Max. tightening torque 6 Nm n: GEDORE QSN 600 FH torque screwdriver S 1/4" 1.2-6 Nm - 1400169 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Application Controlled screw tightening in the range 1.2 - 6 Nm Fast, controlled tightening, enables series production Electrical and electronics industry and apparatus engineering and industrial production or in quality control Design Adjustable torque screwdriver - with scale With 1/4" hexagon socket for 1/4" bits according to DIN 3126 - C 6.3 With adapter also suitable for 1/4" socket spanners in accordance with DIN 3124 Accuracy +/- 6% tolerance of set scale value Construction in accordance with DIN EN ISO 6789, traceable to national standards Precision ball mechanism for controlled clockwise and anticlockwise tightening Precision mechanism glides on noticeably when set value is reached Automatic return to initial position Secured against unintended adjustment "Positiv-Lock" system automatically fixes the set value, 4 models in the range of 0.08 - 9 Nm Micrometer scale division 1 cNm or 0.1 Nm In compliance with EPA (Electrostatic Protected Area), for use in electrostatically sensitive applications Scope of delivery Torque screwdriver type 756, 1/4" - 1/4" adapter (No. 757-20) Models No. 756-06/-09 with additional transverse handle for easier work Test certificate in accordance with DIN EN ISO 6789 Supplied in sturdy cardboard packaging ds: dsc: Scope of delivery Torque screwdriver type 756,1/4" - 1/4" adapter (no. 757-20),Models no. 756-06/-09 with additional transverse handle for easier work,Test certificate according to DIN EN ISO 6789,Delivery in sturdy carton packaging kts: torque screwdriver S 1/4" 1.2-6 Nm kpn: QSN 600 FH kpn_dash: kpn_clear: QSN600FH bkpn: GEDORE QSN 600 FH bkpn_clear: GEDORE QSN600FH c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque screwdrivers / Gedore torque screwdriver sr_no_br_cl_ns: 1400169 sr_ns: GEDORE1400169
r: 02873360 p: 177.52 pid: 29084 b: WIHA q: 0 st: lt: 8 ean: 4010995368883 sr: WIHA 36888 sr_no_br: 36888 sr_no_br_cl: 36888 sr_cl: WIHA36888 sr_dash: sold: 1952.72 p_range: none type: standard act: 1 avo: 1 av: ESD No VDE approved No n: WIHA 283521600 iTorque torque screwdriver with digital scale 1-5 Nm - 36888 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Meets your requirements: Variably adjustable torque covers a wide range of applications. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Lowers your costs: The correct torque protects you from warranty claims. Increases your productivity: Utmost process safety thanks to integrated ClickControl counting function and calibration alarm. Product dimensions: 195 x 60 x 80 mm (LxWxD) Application: For controlled fastening with the pre-set torque. Bit holder: Torque bit universal holder exchange blade for accommodating C 6.3 and E 6.3 (1/4") bits (included in delivery). Extra: Large digital display for simple stepless setting of torque value. Extra: Units can be simply switched - Nm<--> in.lbs / cNm<--> in.oz. Extra: Click Control - integrated counter records all applications. Calibration alert following 5,000 applications (normative reference value/resettable) Extra: Incl. works inspection protocol. Accuracy: ±6%, traceable to national standards. Handle: Torque can be conveniently set directly via push button integrated in handle. Handle: Ergonomic plastic/metal compound handle of quality, robust materials. Handle: Handle sizes proportioned to optimise torque setting. Handle: Distinctly audible and perceptible click signal when set toque is reached. Handle: Compatible with all blades of the 2859. When changing indexable cutter inserts, controlled fastening with a specific torque is essential to ensure they are not damaged. Intelligent, innovative and individual, the iTorque torque screwdriver delivers the remedy. The required Nm value can be easily set within the continuously adjustable range on the cap at the end of the iTorque's handle. What's more, users can also change the torque unit from Nm to lbs. The large digital display with numeric readings allows users to read the set Nm value quickly and easily. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. An integrated counter documents the number of activations, which is particularly important for monitoring testing equipment. The alarm function reminds users when calibration is due - the calibration cycle is set at 5,000 tasks ex works, but can be adjusted as required. The ergonomically shaped handle grip with soft zones provides optimum torque screwdriver handling. The set includes a bit universal holder for holding 1/4" bits. The iTorque is also compatible with 4 mm Wiha Torque interchangeable blades (series 2859). Battery replacement is only possible via complete overhaul of the iTorque. DIN EN ISO 6789. ds: dsc: kts: iTorque torque screwdriver with digital scale 1-5 Nm kpn: 283521600 kpn_dash: kpn_clear: 283521600 bkpn: WIHA 283521600 bkpn_clear: WIHA 283521600 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver sr_no_br_cl_ns: 36888 sr_ns: WIHA36888
r: 02829351 p: 111.239 pid: 44535 b: WERA q: 0 st: lt: 11 ean: 4013288168535 sr: WERA 05074750001 sr_no_br: 05074750001 sr_no_br_cl: 05074750001 sr_cl: WERA05074750001 sr_dash: sold: 1891.063 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 9 mm Bit holder type Internal hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7441 VDE Kraftform adjustable torque screwdriver 1.2-3.0 Nm - 05074750001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Torque VDE holder for safe work up to 1,000 volts. Adjustable torque value from 1.2-3.0 Nm. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. For Kraftform Kompakt VDE blades: the handle/interchangeable blade system allows a rapid exchange of the blade and thereby diverse applications. Adjustable Kraftform VDE torque holder Adjustable torque from 1.2-3.0 Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for Kraftform Kompakt VDE blades Rapid exchange of the interchangeable blades Application For Wera interchangeable Kraftform Kompakt VDE blades only Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform adjustable torque handle for Electricians The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. According to the job, the insulated inter-changeable blade with the required tipstyle, or a switch cabinet key is inserted into the clamping mechanism. By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle. ds: dsc: Scope of delivery Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm), 7441 VDE x 1.2-3.0 Nm kts: Kraftform adjustable torque screwdriver 1.2-3.0 Nm kpn: 7441 VDE kpn_dash: kpn_clear: 7441VDE bkpn: WERA 7441 VDE bkpn_clear: WERA 7441VDE c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074750001 sr_ns: WERA05074750001
r: 41980042 p: 65.95 pid: 71391 b: WERA q: 0 st: lt: 15 ean: 4013288100658 sr: WERA 05074701001 sr_no_br: 05074701001 sr_no_br_cl: 05074701001 sr_cl: WERA05074701001 sr_dash: sold: 1846.6 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7441 Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 1.2-3.0 Nm - 05074701001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7441 x 1.2-3.0 Nm kts: Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 1.2-3.0 Nm kpn: 7441 kpn_dash: kpn_clear: 7441 bkpn: WERA 7441 bkpn_clear: WERA 7441 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074701001 sr_ns: WERA05074701001
r: 02140740 p: 65.95 pid: 45736 b: WERA q: 0 st: lt: 12 ean: 4013288100641 sr: WERA 05074700001 sr_no_br: 05074700001 sr_no_br_cl: 05074700001 sr_cl: WERA05074700001 sr_dash: sold: 1648.75 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7440 Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 0.3-1.2 Nm - 05074700001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7440 x 0.3-1.2 Nm kts: Kraftform adjustable torque screwdriver (0.1-3.0 Nm) with Rapidaptor quick-change holder 0.3-1.2 Nm kpn: 7440 kpn_dash: kpn_clear: 7440 bkpn: WERA 7440 bkpn_clear: WERA 7440 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074700001 sr_ns: WERA05074700001
r: 02835997 p: 86.611 pid: 41734 b: WERA q: 0 st: lt: 12 ean: 4013288106964 sr: WERA 05074730001 sr_no_br: 05074730001 sr_no_br_cl: 05074730001 sr_cl: WERA05074730001 sr_dash: sold: 1385.776 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7400 ESD Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 0.3-1.2 Nm - 05074730001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7440 ESD x 0.3-1.2 Nm kts: Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 0.3-1.2 Nm kpn: 7400 ESD kpn_dash: kpn_clear: 7400ESD bkpn: WERA 7400 ESD bkpn_clear: WERA 7400ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074730001 sr_ns: WERA05074730001
r: 08074028 p: 140.33 pid: 28848 b: WIHA q: 0 st: lt: 10 ean: 4010995431778 sr: WIHA 43177 sr_no_br: 43177 sr_no_br_cl: 43177 sr_cl: WIHA43177 sr_dash: sold: 1262.97 p_range: KLIUM_PRODUCT_RANGE_346 type: standard act: 1 avo: 1 av: ESD No VDE approved Yes Product Range Wiha TorqueVario n: WIHA 293311500 Torque screwdriver with transverse handle TorqueVario-S T electric 5-14 Nm variable - 43177 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Meets your requirements: Variably adjustable torque covers a wide range of applications. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Makes handling easier: Effortless and comfortable transmission of high torques thanks to T-handle with ComfortGrip. Lowers your costs: The correct torque protects you from warranty claims. Offers you full protection: Torque blades tested at 10,000 V AC and approved for 1,000 V AC. Product dimensions: 178 x 45 x 80 mm (LxWxD) Application: Suitable for controlled fastening of predefined torques for tasks such as industrial assembly work. Extra: Incl. works inspection protocol. Standards: Manufactured acc. to IEC 60900. Fastening screws at a specific torque value over 5 Nm with a normal torque screwdriver is a practically impossible task. The fully adjustable torque screwdriver with T-handle comes to the rescue. With a setting range between 5-14 Nm, it unites forces with the insulated torque blades for T-handle to cover a large application field. To set a torque value, the side lid is opened using a one-cent coin. Utilising the adjusting tool provided, the desired torque value can be set and read quickly and easily on the numerical Nm display. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. The integrated friction clutch prevents the user from exceeding the required torque value. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. As a VDE- and IEC-certified product, the torque screwdriver with T-handle is approved for use on live parts up to 1,000 V AC and offers electricians full protection during their daily work. Only for use with insulated Wiha torque blades for T-handles in series 28379 from 2018 onwards. Manufactured acc. to IEC 60900. DIN EN ISO 6789. ds: dsc: kts: Torque screwdriver with transverse handle TorqueVario-S T electric 5-14 Nm variable kpn: 293311500 kpn_dash: kpn_clear: 293311500 bkpn: WIHA 293311500 bkpn_clear: WIHA 293311500 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquevario sr_no_br_cl_ns: 43177 sr_ns: WIHA43177
r: 02829354 p: 111.404 pid: 42755 b: WERA q: 0 st: lt: 16 ean: 4013288184412 sr: WERA 05074757001 sr_no_br: 05074757001 sr_no_br_cl: 05074757001 sr_cl: WERA05074757001 sr_dash: sold: 1225.444 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,7 Nm Bit holder size 9 mm Bit holder type Internal hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 1,7-3,5 Nm Max. tightening torque 3,5 Nm Product Range Wera Kraftform n: WERA 7444 VDE Kraftform adjustable torque screwdriver 1.7-3.5 Nm - 05074757001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Torque VDE holder for safe work up to 1,000 volts. Adjustable torque value from 1.7-3.5 Nm. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. For Kraftform Kompakt VDE blades: the handle/interchangeable blade system allows a rapid exchange of the blade and thereby diverse applications. Adjustable Kraftform VDE torque holder Adjustable torque from 1.7-3.5 Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for Kraftform Kompakt VDE blades Rapid exchange of the interchangeable blades Application For Wera interchangeable Kraftform Kompakt VDE blades only Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform adjustable torque handle for Electricians The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. According to the job, the insulated inter-changeable blade with the required tipstyle, or a switch cabinet key is inserted into the clamping mechanism. By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle. ds: dsc: Scope of delivery Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm), 7444 VDE x 1.7-3.5 Nm kts: Kraftform adjustable torque screwdriver 1.7-3.5 Nm kpn: 7444 VDE kpn_dash: kpn_clear: 7444VDE bkpn: WERA 7444 VDE bkpn_clear: WERA 7444VDE c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074757001 sr_ns: WERA05074757001
r: 41997356 p: 107.272 pid: 72056 b: WERA q: 0 st: lt: 7 ean: 4013288101730 sr: WERA 05074702001 sr_no_br: 05074702001 sr_no_br_cl: 05074702001 sr_cl: WERA05074702001 sr_dash: sold: 1072.72 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 3-6 Nm Max. tightening torque 6 Nm Product Range Wera Kraftform n: WERA 7442 Kraftform Pistol grip adjustable torque screwdriver (3.0 - 8.8 Nm) with Rapidaptor quick change holder 3.0-6.0 Nm - 05074702001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transfer, multi-component for high working speeds and particularly ergonomic screwdriving. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (3.0-8.8 Nm) with Rapidaptor quick-release chuck, 7442 x 3.0-6.0 Nm kts: Kraftform Pistol grip adjustable torque screwdriver (3.0 - 8.8 Nm) with Rapidaptor quick change holder 3.0-6.0 Nm kpn: 7442 kpn_dash: kpn_clear: 7442 bkpn: WERA 7442 bkpn_clear: WERA 7442 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074702001 sr_ns: WERA05074702001
r: 02233621 p: 208.595 pid: 51060 b: GEDORE q: 0 st: lt: 15 ean: 4002805757062 sr: GEDORE 7718130 sr_no_br: 7718130 sr_no_br_cl: 7718130 sr_cl: GEDORE7718130 sr_dash: sold: 1042.975 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Adjustable torque range 1,2-6 Nm Max. tightening torque 6 Nm n: GEDORE QS 6 FH BLUE torque screwdriver S 1/4" 1.2-6 Nm - 7718130 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Application Controlled screw tightening in the range 1 - 6 Nm Fast, controlled tightening, enables series production Electrical and electronics industry and apparatus engineering and industrial production or in quality control Design Adjustable torque screwdriver - with scale With 1/4" hexagon socket for 1/4" bits according to DIN 3126 - C 6.3 With adapter also suitable for 1/4" socket spanners in accordance with DIN 3124 Accuracy +/- 6% tolerance of set scale value Construction in accordance with DIN EN ISO 6789, traceable to national standards Precision ball mechanism for controlled clockwise and anticlockwise tightening Precision mechanism glides on noticeably when set value is reached Automatic reset to initial position, 3 models in the range 0.24 - 9 N-m Micrometer scale division 1 cNm or 0.1 Nm Lightweight design through anodised aluminium handle Scope of delivery Torque screwdriver type 756, 1/4" - 1/4" adapter (No. 757-20) Models No. 757-06/-09 with additional transverse handle for easier work Test certificate in accordance with DIN EN ISO 6789-22017 Supplied in sturdy cardboard packaging ds: dsc: Scope of delivery Torque screwdriver type 756,1/4" - 1/4" adapter (no. 757-20),Models no. 757-06/-09 with additional transverse handle for easier work,Test certificate according to DIN EN ISO 6789-2:2017,Delivery in sturdy carton packaging kts: torque screwdriver S 1/4" 1.2-6 Nm kpn: QS 6 FH BLUE kpn_dash: kpn_clear: QS6FHBLUE bkpn: GEDORE QS 6 FH BLUE bkpn_clear: GEDORE QS6FHBLUE c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque screwdrivers / Gedore torque screwdriver sr_no_br_cl_ns: 7718130 sr_ns: GEDORE7718130
r: 02829300 p: 111.404 pid: 42985 b: WERA q: 0 st: lt: 8 ean: 4013288179111 sr: WERA 05074752001 sr_no_br: 05074752001 sr_no_br_cl: 05074752001 sr_cl: WERA05074752001 sr_dash: sold: 891.232 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 9 mm Bit holder type Internal hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7440 VDE Kraftform adjustable torque screwdriver 0.3-1.2 Nm - 05074752001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Torque VDE holder for safe work up to 1,000 volts. Adjustable torque value from 0.3-1.2 Nm. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. For Kraftform Kompakt VDE blades: the handle/interchangeable blade system allows a rapid exchange of the blade and thereby diverse applications. Adjustable Kraftform VDE torque holder Adjustable torque from 0.3-1.2 Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for Kraftform Kompakt VDE blades Rapid exchange of the interchangeable blades Application For Wera interchangeable Kraftform Kompakt VDE blades only Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform adjustable torque handle for Electricians The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. According to the job, the insulated inter-changeable blade with the required tipstyle, or a switch cabinet key is inserted into the clamping mechanism. By pulling and holding down the clamping sleeve the interchangeable screwdriver blade, or the switch cabinet key, is unlocked and can easily be taken out of the handle. ds: dsc: Scope of delivery Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm), 7440 VDE x 0.3-1.2 Nm kts: Kraftform adjustable torque screwdriver 0.3-1.2 Nm kpn: 7440 VDE kpn_dash: kpn_clear: 7440VDE bkpn: WERA 7440 VDE bkpn_clear: WERA 7440VDE c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074752001 sr_ns: WERA05074752001
r: 08073693 p: 90.743 pid: 29085 b: WIHA q: 2 st: 1 lt: 1 ean: 4010995264635 sr: WIHA 26463 sr_no_br: 26463 sr_no_br_cl: 26463 sr_cl: WIHA26463 sr_dash: sold: 816.687 p_range: KLIUM_PRODUCT_RANGE_346 type: standard act: 1 avo: 1 av: ESD No VDE approved No Product Range Wiha TorqueVario n: WIHA 28521500 TorqueVario-S variable torque screwdriver 0.8-5.0 Nm - 26463 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Meets your requirements: Variably adjustable torque covers a wide range of applications. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Lowers your costs: The correct torque protects you from warranty claims. Product dimensions: 190 x 50 x 50 mm (LxWxD) Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade. Accuracy: ±6%, tracing to national standards (see table for other tolerances). Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Handle: Ergonomic multi-component handle, particulary light and compact. Handle: Handle sizes proportioned to optimise torque setting. Handle: Audible and perceptible click when the pre-set torque has been attained. Handle: Compatible with all blades of the 2859. Variably adjustable torque from 0.8 - 5.0 Nm Acoustic and physically perceptible triggering signal protects against damage to materials and rework Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs DIN EN ISO 6789. ds: dsc: kts: TorqueVario-S variable torque screwdriver 0.8-5.0 Nm kpn: 28521500 kpn_dash: kpn_clear: 28521500 bkpn: WIHA 28521500 bkpn_clear: WIHA 28521500 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquevario sr_no_br_cl_ns: 26463 sr_ns: WIHA26463
