r: 08085278 p: 0.655 pid: 105681 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179943 sr: SOUDAL 157818 sr_no_br: 157818 sr_no_br_cl: 157818 sr_cl: SOUDAL157818 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 20 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/1-4 - 157818 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157818 sr_ns: SOUDAL157818
r: 08085277 p: 0.655 pid: 106265 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180185 sr: SOUDAL 157838 sr_no_br: 157838 sr_no_br_cl: 157838 sr_cl: SOUDAL157838 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 20 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/1-4 - 157838 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157838 sr_ns: SOUDAL157838
r: 08085256 p: 0.517 pid: 105664 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180000 sr: SOUDAL 157822 sr_no_br: 157822 sr_no_br_cl: 157822 sr_cl: SOUDAL157822 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 20 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape grey 20/1-4 - 157822 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape grey 20/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157822 sr_ns: SOUDAL157822
r: 08085268 p: 0.517 pid: 107026 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179936 sr: SOUDAL 157819 sr_no_br: 157819 sr_no_br_cl: 157819 sr_cl: SOUDAL157819 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/2-6 - 157819 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157819 sr_ns: SOUDAL157819
r: 08085267 p: 0.517 pid: 107023 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180192 sr: SOUDAL 157839 sr_no_br: 157839 sr_no_br_cl: 157839 sr_cl: SOUDAL157839 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/2-6 - 157839 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157839 sr_ns: SOUDAL157839
r: 08085265 p: 0.406 pid: 105671 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180222 sr: SOUDAL 157843 sr_no_br: 157843 sr_no_br_cl: 157843 sr_cl: SOUDAL157843 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/1-4 - 157843 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157843 sr_ns: SOUDAL157843
r: 08085262 p: 0.406 pid: 105662 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179950 sr: SOUDAL 157820 sr_no_br: 157820 sr_no_br_cl: 157820 sr_cl: SOUDAL157820 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/2-6 - 157820 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157820 sr_ns: SOUDAL157820
r: 08085266 p: 0.406 pid: 107019 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179998 sr: SOUDAL 157823 sr_no_br: 157823 sr_no_br_cl: 157823 sr_cl: SOUDAL157823 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/1-4 - 157823 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157823 sr_ns: SOUDAL157823
r: 08085261 p: 0.406 pid: 106259 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180161 sr: SOUDAL 157840 sr_no_br: 157840 sr_no_br_cl: 157840 sr_cl: SOUDAL157840 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/2-6 - 157840 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157840 sr_ns: SOUDAL157840
r: 08085263 p: 0.387 pid: 106262 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180208 sr: SOUDAL 157845 sr_no_br: 157845 sr_no_br_cl: 157845 sr_cl: SOUDAL157845 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 20 m Thickness 1-2 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/1-2 - 157845 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/1-2 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157845 sr_ns: SOUDAL157845
r: 08085264 p: 0.387 pid: 105665 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180048 sr: SOUDAL 157825 sr_no_br: 157825 sr_no_br_cl: 157825 sr_cl: SOUDAL157825 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 15 mm Roll length 20 m Thickness 1-2 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/1-2 - 157825 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/1-2 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157825 sr_ns: SOUDAL157825
r: 08085260 p: 0.295 pid: 107016 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180055 sr: SOUDAL 157824 sr_no_br: 157824 sr_no_br_cl: 157824 sr_cl: SOUDAL157824 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/1-4 - 157824 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157824 sr_ns: SOUDAL157824
r: 08085259 p: 0.295 pid: 107013 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180215 sr: SOUDAL 157844 sr_no_br: 157844 sr_no_br_cl: 157844 sr_cl: SOUDAL157844 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/1-4 - 157844 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157844 sr_ns: SOUDAL157844
r: 08085257 p: 0.258 pid: 105311 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180031 sr: SOUDAL 157826 sr_no_br: 157826 sr_no_br_cl: 157826 sr_cl: SOUDAL157826 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 20 m Thickness 1-2 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/1-2 - 157826 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/1-2 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157826 sr_ns: SOUDAL157826
r: 08085258 p: 0.258 pid: 105668 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179844 sr: SOUDAL 157806 sr_no_br: 157806 sr_no_br_cl: 157806 sr_cl: SOUDAL157806 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 10 mm Roll length 20 m Thickness 1-2 mm n: SOUDAL Soudaband PRO BG1 sealing tape 10/1-2 - 157806 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 10/1-2 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157806 sr_ns: SOUDAL157806
