r: 08085286 p: 2.583 pid: 106271 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179851 sr: SOUDAL 157809 sr_no_br: 157809 sr_no_br_cl: 157809 sr_cl: SOUDAL157809 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 25 mm Roll length 4 m Thickness 20-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/10-20 - 157809 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157809 sr_ns: SOUDAL157809
r: 08085285 p: 2.583 pid: 105312 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180024 sr: SOUDAL 157828 sr_no_br: 157828 sr_no_br_cl: 157828 sr_cl: SOUDAL157828 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 25 mm Roll length 4 m Thickness 10-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/10-20 - 157828 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157828 sr_ns: SOUDAL157828
r: 08085275 p: 1.974 pid: 107041 b: SOUDAL q: 0 st: lt: 6 ean: 5411183180109 sr: SOUDAL 157829 sr_no_br: 157829 sr_no_br_cl: 157829 sr_cl: SOUDAL157829 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 4 m Thickness 10-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/10-20 - 157829 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157829 sr_ns: SOUDAL157829
r: 08085283 p: 1.568 pid: 105682 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180086 sr: SOUDAL 157830 sr_no_br: 157830 sr_no_br_cl: 157830 sr_cl: SOUDAL157830 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/8-15 - 157830 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157830 sr_ns: SOUDAL157830
r: 08085284 p: 1.568 pid: 107045 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179912 sr: SOUDAL 157811 sr_no_br: 157811 sr_no_br_cl: 157811 sr_cl: SOUDAL157811 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/8-15 - 157811 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157811 sr_ns: SOUDAL157811
r: 08085294 p: 1.43 pid: 105690 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179974 sr: SOUDAL 157815 sr_no_br: 157815 sr_no_br_cl: 157815 sr_cl: SOUDAL157815 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 10 m Thickness 4-9 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/4-9 - 157815 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/4-9 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157815 sr_ns: SOUDAL157815
r: 08085293 p: 1.43 pid: 105687 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180154 sr: SOUDAL 157834 sr_no_br: 157834 sr_no_br_cl: 157834 sr_cl: SOUDAL157834 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 10 m Thickness 4-9 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/4-9 - 157834 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/4-9 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157834 sr_ns: SOUDAL157834
r: 08085282 p: 1.338 pid: 106268 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179899 sr: SOUDAL 157813 sr_no_br: 157813 sr_no_br_cl: 157813 sr_cl: SOUDAL157813 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 8 m Thickness 5-12 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/5-12 - 157813 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/5-12 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157813 sr_ns: SOUDAL157813
r: 08085274 p: 1.181 pid: 107037 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179905 sr: SOUDAL 157812 sr_no_br: 157812 sr_no_br_cl: 157812 sr_cl: SOUDAL157812 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/8-15 - 157812 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157812 sr_ns: SOUDAL157812
r: 08085273 p: 1.181 pid: 105672 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180093 sr: SOUDAL 157831 sr_no_br: 157831 sr_no_br_cl: 157831 sr_cl: SOUDAL157831 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/8-15 - 157831 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157831 sr_ns: SOUDAL157831
r: 08085271 p: 0.996 pid: 107033 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180079 sr: SOUDAL 157833 sr_no_br: 157833 sr_no_br_cl: 157833 sr_cl: SOUDAL157833 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 8 m Thickness 5-12 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/5-12 - 157833 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/5-12 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157833 sr_ns: SOUDAL157833
r: 08085292 p: 0.987 pid: 105692 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179981 sr: SOUDAL 157817 sr_no_br: 157817 sr_no_br_cl: 157817 sr_cl: SOUDAL157817 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/2-6 - 157817 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157817 sr_ns: SOUDAL157817
r: 08085291 p: 0.987 pid: 106275 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180123 sr: SOUDAL 157837 sr_no_br: 157837 sr_no_br_cl: 157837 sr_cl: SOUDAL157837 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 12 m Thickness 2-6 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/2-6 - 157837 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/2-6 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157837 sr_ns: SOUDAL157837
r: 08085279 p: 0.969 pid: 105676 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180147 sr: SOUDAL 157835 sr_no_br: 157835 sr_no_br_cl: 157835 sr_cl: SOUDAL157835 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 10 m Thickness 4-9 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/4-9 - 157835 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/4-9 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157835 sr_ns: SOUDAL157835
r: 08085280 p: 0.969 pid: 105679 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179967 sr: SOUDAL 157816 sr_no_br: 157816 sr_no_br_cl: 157816 sr_cl: SOUDAL157816 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 10 m Thickness 4-9 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/4-9 - 157816 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/4-9 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157816 sr_ns: SOUDAL157816
r: 08085289 p: 0.738 pid: 107046 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180178 sr: SOUDAL 157841 sr_no_br: 157841 sr_no_br_cl: 157841 sr_cl: SOUDAL157841 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/1-4 - 157841 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157841 sr_ns: SOUDAL157841
r: 08085290 p: 0.738 pid: 105688 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180017 sr: SOUDAL 157821 sr_no_br: 157821 sr_no_br_cl: 157821 sr_cl: SOUDAL157821 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 sealing tape 30/1-4 - 157821 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 30/1-4 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157821 sr_ns: SOUDAL157821
