r: 11940433 p: 5.118 pid: 156765 b: SOUDAL q: 1711 st: 1 lt: 1 ean: 5411183001619 sr: SOUDAL 102384 sr_no_br: 102384 sr_no_br_cl: 102384 sr_cl: SOUDAL102384 sr_dash: sold: 25687.242 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml EUH-statements EUH210 Relative density 1 ADR packing group ADR class Colour (manufacturer) Transparent UN number Physical state Liquid Flash point >100 °C Fire resistant No Packaging Cartridge n: SOUDAL Silirub 2 neutral silicone transparent (310 ml) - 102384 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description: Silirub 2 is a high-quality neutral, elastic onecomponent joint sealant based on silicones. Characteristics: Very easy application Permanent colour, UV-resistant Stays elastic after curing Available in a wide range of colours Very good adhesion on many materials Low modulus Excellent acoustic properties (noise reduction) Applications: Buildingand construction joints Topsealing at glazing jobs Joints with high movement between different building materials Sealings between treated wood, metal, PVC profiles and glass Directions for use: Type: all usual building surfaces State of Surface: clean, dry, free of dust and grease Preparation: for certain applications apply Primer 150 on porous surfaces (see primer table) - no primer required for non porous surfaces. Surface Activator should be used to enhance adhesion to non porous surfaces. We recommend a preliminary compatibility test. Remarks: Do not use on natural stones like marble, granite, (staining effect). Use Silirub MA for these applications.Not recommended for use on PC and PMMA because it can cause crazing (stress cracking) in these materials. Use an alkoxy type instead onthese materials.Technical Norms/Conforms with: Belgium: ATG 1808 (NIT 107) Rapport IANESCO 3812-label alimentaire for applications in food surroundings Gemany: DIN 18540 Teil 2 - DIN 18545 Teil 2 Dichtstoffgruppe E United Kingdom: BS 5889 Type A USA: TTS 001543a Class A ds: dsc: kts: neutral silicone transparent (310 ml) kpn: Silirub 2 kpn_dash: kpn_clear: Silirub2 bkpn: SOUDAL Silirub 2 bkpn_clear: SOUDAL Silirub2 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal silicone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 102384 sr_ns: SOUDAL102384
r: 02354426 p: 78.347 pid: 124983 b: SOUDAL q: 24 st: 1 lt: 1 ean: 5411183116856 sr: SOUDAL 124163 sr_no_br: 124163 sr_no_br_cl: 124163 sr_cl: SOUDAL124163 sr_dash: sold: 24835.999 p_range: none type: standard act: 1 avo: 1 av: Weight 16 kg EUH-statements EUH210 Relative density 1,725 ADR packing group Color Brown UN number ADR class Physical state Solid Packaging Bucket n: SOUDAL MS-30 Plus parquet adhesive brown 16 kg - 124163 cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description: MS-30PLUS is a solvent, and water-free universal parquet adhesive. Suitable for bonding many types of parquet floors onto suitable indoor substrates. Characteristics: Remains permanently elastic EC-1R PLUS label: very low emission Ready to use, single component Solvent free Contains no water Free of isocyanates Easy to apply Forms stable peaks once applied by a notched trowel or spreader comb Rapid cure and build up of final bond strength High final bond strength (according to EN14293) Suitable for underfloor heating Avoids staining of the hands Applications: MS-30PLUS is a solvent, and water-free universal parquet adhesive based upon polymers. Suitable for indoor bonding of all types of wooden floorssuch as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates. Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (largeparticle size chipboard) , including floors with underfloor heating. MS-30PLUS is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces. Directions for use: MS-30PLUS should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched SOUDAL trowel N°11. For parquet sizes smaller than 60mm wide and 300mm long notched SOUDAL trowel N°3 is recommended. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength. Wait at least 16 hrs. before sanding and finishing the parquet. Uncured MS-30PLUSmay be removed from tools and parquet with SOUDAL Adhesive cleaner. Cured adhesive must be removed mechanically. ds: dsc: kts: parquet adhesive brown 16 kg kpn: MS-30 Plus kpn_dash: MS kpn_clear: MS30Plus bkpn: SOUDAL MS-30 Plus bkpn_clear: SOUDAL MS30Plus c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal adhesive sr_no_br_cl_ns: 124163 sr_ns: SOUDAL124163
r: 11990563 p: 11.549 pid: 105777 b: SOUDAL q: 36 st: 1 lt: 1 ean: 5411183036611 sr: SOUDAL 108766 sr_no_br: 108766 sr_no_br_cl: 108766 sr_cl: SOUDAL108766 sr_dash: sold: 24287.547 p_range: none type: standard act: 1 avo: 1 av: H-statements H315; H317; H319; H332; H334; H335; H351; H373 Relative density 1,1 ADR packing group ADR class UN number Principal hazard property GHS08 Health hazard Weight 750 g Conseils de prudence (P) P101; P102; P264; P280; P304 + P340; P308 + P313; P342 + P311; P405; P501 Hazard class GHS07 Harmful or irritant; GHS08 Health hazard Solid content 0,95 % Physical state Liquid Curing system Polymerisatie door vocht ( luchtvochtheid ) Density 1,11 g/ml Colour (manufacturer) Brown Based on Polyurethane Packaging Bottle Flash point 81 °C n: SOUDAL PRO 40P PU wood glue waterproof (750 g) - 108766 cn: WOOD GLUE cn2: WOOD GLUE cn_clear: WOODGLUE d: Product description: PRO 40P is a 1-component, ready to use Polyurethane based adhesive with excellent water resistance. Characteristics: Easy application Professional quality Foaming penetration action to fill bond cavities Fast drying Water resistance: D4 (DIN EN 204) Can be used on damp wood Applications: Interior applications with frequent long-term exposure to running or condensed water. Exterior applications with exposure to weather influences. Manufacturing of door and window-frames that need to meet class D4 according to EN204. Bonding of wooden construction elements Directions for use: Method: Apply the adhesive by means of a brush or notched trowel to one of the to be bonded materials. Join the parts together within 15 minutes And clamp for at least 3 hours. Pressing the materials, during curing, is necessary to reach the highest possible end strength. Application temperature: +5°C to +35°C Clean: Pro 40P can, before the adhesive is cured, be removed from tools and materials with Soudal Gun and Foam Cleaner. Cured adhesive has to be removed mechanically. Repair: with Pro 40P ds: dsc: kts: PU wood glue waterproof (750 g) kpn: PRO 40P kpn_dash: kpn_clear: PRO40P bkpn: SOUDAL PRO 40P bkpn_clear: SOUDAL PRO40P c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Wood glue | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal wood glue | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Wood glue sr_no_br_cl_ns: 108766 sr_ns: SOUDAL108766
r: 12991057 p: 7.432 pid: 105352 b: SOUDAL q: 179 st: 1 lt: 1 ean: 5411183004023 sr: SOUDAL 105031 sr_no_br: 105031 sr_no_br_cl: 105031 sr_cl: SOUDAL105031 sr_dash: sold: 22400.048 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,6 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Repaintable Yes Colour (manufacturer) Black n: SOUDAL Fix ALL Flexi hybrid adhesive sealant black (290 ml) - 105031 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: (Fix ALL Classic is now called Fix ALL Flexi: same quality - new name) Fix All Flexi is a high quality single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: Good applicability and toolability High adhesive strength Permanent elastic after cure Paintable with waterbased paints Applications: Sealing and bonding in the building and construction industry. Sanitary and kitchen areas - resists mould growth. Structural bonding in vibrating constructions. Sealing of floor joints. Sealing and bonding of natural stone (marble, granite, ) Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All Flexi Remarks: Fix All Flexi may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility tests. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant black (290 ml) kpn: Fix ALL Flexi kpn_dash: kpn_clear: FixALLFlexi bkpn: SOUDAL Fix ALL Flexi bkpn_clear: SOUDAL FixALLFlexi c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 105031 sr_ns: SOUDAL105031
r: 02335378 p: 7.893 pid: 124963 b: SOUDAL q: 937 st: 1 lt: 1 ean: 5411183042575 sr: SOUDAL 110980 sr_no_br: 110980 sr_no_br_cl: 110980 sr_cl: SOUDAL110980 sr_dash: sold: 18611.694 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Conseils de prudence (P) P101; P102; P273; P501 Relative density 1,053 ADR packing group ADR class UN number Net volume 290 ml H-statements H412 Physical state Solid Flash point >100 °C Packaging Cartridge Repaintable Yes Colour (manufacturer) Transparent n: SOUDAL Fix ALL Crystal transparent hybrid adhesive sealant (290 ml) - 110980 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All Crystal is a crystal clear, neutral, elastic, single component sealant/adhesive based on SMX Hybrid Polymer technology. Characteristics: Completely transparant Outstanding bond strength on nearly all surfaces High performance mechanical properties Very easy to tool and finish Good extrudability even at low temperatures Ecological advantages - free of isocyanates, solvents, halogens and acids Minimal health and safety considerations Can be painted with water based paints and a number of other systems (preliminary test required) Permanently elastic after full cure Applications: All interior and exterior bonding and sealing applications Transparent and elastic bonding in many different construction and building applications Invisible bonding of glass and other transparent materials. Directions for use: Joint dimensions: - Maximum Width:1mm (connecting joints) Application: - Method: Manual- or pneumatic caulking gun - Application temperature: +5°C until +35°C Cleaning: - Fix All Cleaner immediately after application and before curing Tooling: - with soapy solution before skin formation Repair with: Fix All Crystal Remarks: Fix All Crystal may be overpainted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. Fix All Crystal can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test. Not suitable for dilatation joints Do not use in applications where continuous water immersion is possible or in sanitary applications. Fix All Crystal displays very good UV stability but may discolour in extreme conditions or after many years of exposure. This product can not be used as a glazing sealant. ds: dsc: kts: transparent hybrid adhesive sealant (290 ml) kpn: Fix ALL Crystal kpn_dash: kpn_clear: FixALLCrystal bkpn: SOUDAL Fix ALL Crystal bkpn_clear: SOUDAL FixALLCrystal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 110980 sr_ns: SOUDAL110980
r: 02458080 p: 12.228 pid: 121771 b: SOUDAL q: 76 st: 1 lt: 1 ean: 5411183119673 sr: SOUDAL 124715 sr_no_br: 124715 sr_no_br_cl: 124715 sr_cl: SOUDAL124715 sr_dash: sold: 13573.08 p_range: none type: standard act: 1 avo: 1 av: H-statements H334; H412 ADR packing group ADR class UN number Conseils de prudence (P) P261; P273; P284; P304 + P340; P342 + P311; P501 Principal hazard property GHS08 Health hazard Hazard class GHS08 Health hazard Physical state Liquid Flash point >100 °C Packaging Cartridge Colour (manufacturer) Champagne Net volume 310 ml n: SOUDAL Aquaswell polyurethane joint sealant, swells on contact with water (310 ml) - 124715 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudal Aquaswell is a high quality, one component polyurethane sealant which swells up in contact with water to create a water- and gastight seal in pipe- and cable penetrations. Characteristics: Waterand gastight up to 5 bar (DVGW VP-601). Very good adhesion on concrete and many metals, PVC. Very easy application on both horizontal and vertical substrates. Swells up to 450% of its original volume in contact with water. Stays elastic after curing. Returns to its original shape after swelling. Applications: Water sealing pipeand cable penetrations. Water sealing concrete joints. Bonding of water swelling water stop tape onto rough surfaces. Directions for use: Method: caulking gun. Fill the penetration in the concrete structure on each side to 5cm deep using Soudal Aquaswell, according to the application Table (technical datasheet). For large penetrations PU backing rods Should be wrapped around the pipe in the centre of the concrete structure according to the application table. Application temperature: +1°C to +30°C Clean: with white spirit immediately after use. Finishing (optional): with a soapy solution or Soudal Finishing Solution before skin formation. Repair: with the same product. Remarks: In order to ensure the correct performance of the product, Soudal recommends a preliminary adhesion test. ds: dsc: kts: polyurethane joint sealant, swells on contact with water (310 ml) kpn: Aquaswell kpn_dash: kpn_clear: Aquaswell bkpn: SOUDAL Aquaswell bkpn_clear: SOUDAL Aquaswell c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 124715 sr_ns: SOUDAL124715
r: 11993375 p: 8.134 pid: 105794 b: SOUDAL q: 689 st: 1 lt: 1 ean: 5411183030190 sr: SOUDAL 100268 sr_no_br: 100268 sr_no_br_cl: 100268 sr_cl: SOUDAL100268 sr_dash: sold: 13299.09 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) White n: SOUDAL Fix ALL High Tack hybrid adhesive sealant white (290 ml) - 100268 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant white (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100268 sr_ns: SOUDAL100268
r: 02673876 p: 40.33 pid: 122087 b: SOUDAL q: 21 st: 1 lt: 1 ean: 5411183161283 sr: SOUDAL 145785 sr_no_br: 145785 sr_no_br_cl: 145785 sr_cl: SOUDAL145785 sr_dash: sold: 12784.61 p_range: none type: standard act: 1 avo: 1 av: Weight 4,5 kg Relative density 1 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight LQ air- and vapour-tight membrane black (4.5 kg) - 145785 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black (4.5 kg) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 145785 sr_ns: SOUDAL145785
r: 02281853 p: 8.134 pid: 124831 b: SOUDAL q: 721 st: 1 lt: 1 ean: 5411183030206 sr: SOUDAL 100270 sr_no_br: 100270 sr_no_br_cl: 100270 sr_cl: SOUDAL100270 sr_dash: sold: 12615.834 p_range: none type: standard act: 1 avo: 1 av: Color Grey Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Grey n: SOUDAL Fix ALL High Tack hybrid adhesive sealant extra strong white (290 ml) - 100270 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant extra strong white (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100270 sr_ns: SOUDAL100270
r: 02333947 p: 5.515 pid: 121769 b: SOUDAL q: 121 st: 1 lt: 1 ean: 5411183031968 sr: SOUDAL 101665 sr_no_br: 101665 sr_no_br_cl: 101665 sr_cl: SOUDAL101665 sr_dash: sold: 11995.125 p_range: none type: standard act: 1 avo: 1 av: Net volume 210 ml Conseils de prudence (P) P101; P102; P261; P271; P280; P304 + P340; P342 + P311; P405; P501 Relative density 1,10 - 1,25 ADR packing group ADR class UN number Number of components 2 Principal hazard property GHS08 Health hazard H-statements H315; H317; H319; H332; H334; H335; H351; H373 Hazard class GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point >93 °C Packaging Spray can Based on Polyurethane Curing system Chemische reactie Fire resistant No n: SOUDAL Quick-Fix 2K two-component PU foam without propellant (210 ml) - 101665 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: - ds: dsc: kts: two-component PU foam without propellant (210 ml) kpn: Quick-Fix 2K kpn_dash: Quick kpn_clear: QuickFix2K bkpn: SOUDAL Quick-Fix 2K bkpn_clear: SOUDAL QuickFix2K c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal pu foam | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 101665 sr_ns: SOUDAL101665
r: 02334154 p: 8.708 pid: 124855 b: SOUDAL q: 13 st: 1 lt: 1 ean: 5411183003200 sr: SOUDAL 101127 sr_no_br: 101127 sr_no_br_cl: 101127 sr_cl: SOUDAL101127 sr_dash: sold: 11250.736 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml ADR packing group ADR class Principal hazard property GHS08 Health hazard UN number Conseils de prudence (P) P101; P102; P264; P280; P304 + P340; P308 + P313; P342 + P311; P405; P501 H-statements H315; H317; H319; H332; H334; H335; H351; H373 Hazard class GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Packaging Cartridge Color Colourless n: SOUDAL Purocol Express D4 PU construction adhesive 310 ml - 101127 cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description: Purocol Express is a one-component, ready to use, transparent polyurethane based construction adhesive. Characteristics: Professional quality Transparant Fast curing Filling characteristics, suitable for uneven surfaces Waterproof D4 Solvent free Applications: Interior applications with frequent long-term exposure to running or condensed water. Exterior applications with exposion to weather influences. Manufacturing of door and window-frames that need to meet class D4 according to EN204. Bonding of wooden construction elements Bonding of insulation materials (including polystyrene) Directions for use: Method: Apply the adhesive by means of a manual or pneumatic caulking gun to one of the to be bonded materials. Join the parts together within 5 minutes and clamp for at least 1 hour. Pressing the materials, during curing, is necessary to reach the highest possible end strength. Application temperature: +5°C to +35°C Clean: Purocol Express can, before the adhesive is cured, be removed from tools and materials with Soudal Gun and Foam Cleaner. Cured adhesive has to be removed mechanically. Repair: with Purocol Express ds: dsc: kts: PU construction adhesive 310 ml kpn: Purocol Express D4 kpn_dash: kpn_clear: PurocolExpressD4 bkpn: SOUDAL Purocol Express D4 bkpn_clear: SOUDAL PurocolExpressD4 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal adhesive | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 101127 sr_ns: SOUDAL101127
r: 02281844 p: 6.934 pid: 123258 b: SOUDAL q: 16 st: 1 lt: 1 ean: 5411183035812 sr: SOUDAL 105333 sr_no_br: 105333 sr_no_br_cl: 105333 sr_cl: SOUDAL105333 sr_dash: sold: 9984.96 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Relative density 1,475 ADR packing group ADR class Principal hazard property GHS05 Corrosive UN number Conseils de prudence (P) P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338 + P310; P405; P501 H-statements H315; H317; H318; H334; H335; H351 Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point >100 °C Packaging Cartridge Color Beige n: SOUDAL PU Construct Extra Fast D4 PU construction adhesive 310 ml - 105333 cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description: PU Construct Extra Fast is a single component polyurethane based assembly adhesive with high bond strength and high water resistance. Characteristics: Professional quality Cartridge applied Fast curing Filling characteristics, suitable for uneven surfaces Very high bond strength Waterproof D4 Solvent free Applications: Interior applications with frequent long-term exposure to running or condensed water. Exterior applications with exposure to weather influences. Manufacturing of door and window-frames that need to meet class D4 according to EN204. Bonding of wooden construction elements Bonding of insulation materials (including polystyrene) Directions for use: Method: Apply the adhesive by means of a manual or pneumatic caulking gun to one of the to be bonded materials. Join the parts together within 5 minutes and clamp for at least 15 minutes. Pressing the materials, during curing, is necessary to reach the highest possible end strength. Application temperature: +5°C to +35°C Clean: PU Construct Fast can, before the adhesive is cured, be removed from tools and materials with Soudal Gun and Foam Cleaner. Cured adhesive has to be removed mechanically. Repair: with PU Construct Fast ds: dsc: kts: PU construction adhesive 310 ml kpn: PU Construct Extra Fast D4 kpn_dash: kpn_clear: PUConstructExtraFastD4 bkpn: SOUDAL PU Construct Extra Fast D4 bkpn_clear: SOUDAL PUConstructExtraFastD4 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal adhesive | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 105333 sr_ns: SOUDAL105333
r: 02334202 p: 75.991 pid: 123290 b: SOUDAL q: 8 st: 1 lt: 1 ean: 5411183001220 sr: SOUDAL 103051 sr_no_br: 103051 sr_no_br_cl: 103051 sr_cl: SOUDAL103051 sr_dash: sold: 9422.884 p_range: none type: standard act: 1 avo: 1 av: Net volume 20 l ADR packing group ADR class UN number EUH-statements EUH208; EUH210 Physical state Liquid Curing system Fysische droging Density 1,2 g/ml pH valud 6-7 Solid content 0,5 % Colour (manufacturer) White Based on PVAc Packaging Jerrycan n: SOUDAL PRO 10D wood glue white/semi-transparent (20 l) - 103051 cn: WOOD GLUE cn2: WOOD GLUE cn_clear: WOODGLUE d: Product description: Pro10D Wood Adhesive is a ready to use, fast drying, PVA-based wood adhesive. Characteristics: Easy application Semi-transparent when dry High bond strength Applications: Bonding of all common wood connections Bonding of paper products Directions for use: Method: apply the adhesive by means of a brush or notched trowel to one of the to be bonded substrates. Join the parts together and press for 2 - 4 hours. Pressing times: HPL to fibreboard at 60°C - 80 g/m² adhesive; approx. 45 sec.- 100 g/m² adhesive; approx. 60 sec Application temperature: +5°C to +30°C Clean: Uncured Pro10D Wood Adhesive may be removed from materials and tools with water. Cured adhesive must be removed mechanically. Repair: with Pro10D Wood Adhesive Remarks: When bonding certain kinds of wood, such as oak or tropical hardwood, discoloration may occur. Do not dilute the adhesive ds: dsc: kts: wood glue white/semi-transparent (20 l) kpn: PRO 10D kpn_dash: kpn_clear: PRO10D bkpn: SOUDAL PRO 10D bkpn_clear: SOUDAL PRO10D c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Wood glue | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal wood glue sr_no_br_cl_ns: 103051 sr_ns: SOUDAL103051
r: 11990038 p: 8.134 pid: 106351 b: SOUDAL q: 775 st: 1 lt: 1 ean: 5411183030220 sr: SOUDAL 100272 sr_no_br: 100272 sr_no_br_cl: 100272 sr_cl: SOUDAL100272 sr_dash: sold: 8809.122 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Black n: SOUDAL Fix ALL High Tack hybrid adhesive sealant extra strong black (290 ml) - 100272 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant extra strong black (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100272 sr_ns: SOUDAL100272
r: 02368280 p: 5.564 pid: 123511 b: SOUDAL q: 296 st: 1 lt: 1 ean: 5411183059559 sr: SOUDAL 114120 sr_no_br: 114120 sr_no_br_cl: 114120 sr_cl: SOUDAL114120 sr_dash: sold: 8718.788 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Black n: SOUDAL SoudaSeal 250 XF hybrid adhesive sealant black (290 ml) - 114120 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Soudaseal 250 XF is a high quality, single component MS polymer based adhesive sealant with a high initial tack. Characteristics: High performance mechanical properties Combines high stifness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accomodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Colour stability and UV resistance Can be painted wet-on-wet in paint trains with most industrial paints Withstands all climatic conditions Minimal health and safety considerations Applications: Structural elastic bonding in the building and metal working industry Structural bonding applications in the automotive industry (cars, coaches, caravans, marine, trains) Elastic bonding of panels, profiles and other pieces on the most common substrates Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 250 XF Remarks: Soudaseal 250 XF may be painted with most types of lacquer used in industrial applications, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase Soudaseal 250 XF can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc. may differ from manufacturer to manufacturer, we recommend a preliminary compatibility test ds: dsc: kts: hybrid adhesive sealant black (290 ml) kpn: SoudaSeal 250 XF kpn_dash: kpn_clear: SoudaSeal250XF bkpn: SOUDAL SoudaSeal 250 XF bkpn_clear: SOUDAL SoudaSeal250XF c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 114120 sr_ns: SOUDAL114120
