MS-30PLUS is a solvent, and water-free universal parquet adhesive.
Suitable for bonding many types of parquet floors onto suitable indoor substrates.
Characteristics:
Remains permanently elastic
EC-1R PLUS label: very low emission
Ready to use, single component
Solvent free
Contains no water
Free of isocyanates
Easy to apply
Forms stable peaks once applied by a notched trowel or spreader comb
Rapid cure and build up of final bond strength
High final bond strength (according to EN14293)
Suitable for underfloor heating
Avoids staining of the hands
Applications:
MS-30PLUS is a solvent, and water-free universal parquet adhesive based upon polymers.
Suitable for indoor bonding of all types of wooden floorssuch as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates.
Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (largeparticle size chipboard) , including floors with underfloor heating.
MS-30PLUS is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.
Directions for use:
MS-30PLUS should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched SOUDAL trowel N°11. For parquet sizes smaller than 60mm wide and 300mm long notched SOUDAL trowel N°3 is recommended. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer.
A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength.
Wait at least 16 hrs. before sanding and finishing the parquet.
Uncured MS-30PLUSmay be removed from tools and parquet with SOUDAL Adhesive cleaner. Cured adhesive must be removed mechanically.
