How is this lubricator driven?

The unit is gas-driven by an internal gas cell producing inert gas, requiring no external power.

What type of lubricant is included in this unit?

It is pre-filled with 60 ml of SKF LGWA 2 grease, formulated for wide temperature ranges and extreme pressure.

What is the connection thread size on this lubricator?

The unit has an R 1/4 connecting thread for direct mounting to the lubrication point.

Is this automatic lubricator approved for hazardous areas?

Yes, it is ATEX certified for use in zone 0 environments.

SKF LAGD 60/WA2 gas-powered automatic single-point lubrication system with LGWA 2 grease 60 ml

Supplier number: SKF LAGD 60/WA2 | EAN 7316571363868

33.60 tax incl.

€27.77 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Continuous lubrication with Skf

Practical benefits

Flexible adjustable dispense rate: You easily adjust the lubrication period without tools across a timeframe of 1 to 12 months.
Clear visual level inspection: The transparent container lets you monitor the remaining lubricant level and dispensing rate at a glance.
Safe for restricted spaces: A compact design and ATEX zone 0 approval allow you to install the unit safely in tight areas.

In a nutshell

The right choise for

With the Skf System 24 lagd 60/WA2 gas-driven single-point automatic lubricator, you deliver continuous and controlled lubrication to rotating equipment such as pumps, fans, and conveyors. Pre-filled with 60 ml of Skf lgwa 2 multi-purpose grease, the unit operates autonomously through an internal gas cell without needing an external power supply. You can easily adjust the dispense rate tool-free from 1 to 12 months using the top dial. Thanks to its compact design and r 1/4 connecting thread, mounting in tight or hard-to-reach locations is straightforward. The transparent container provides clear visual inspection of the grease level, keeping bearings protected against premature wear.

Product information FAQ

€33.60

In stock - tax incl.

Key features according to our expert

Product description

The SKF SYSTEM 24 LAGD 60/WA2 is filled with SKF LGWA 2 grease for wide temperature ranges and extreme pressures, recommended for electric motors, conveyors, fans and pumps. Our gas driven single point automatic lubricators are available in many configurations, pre-filled with SKF lubricants or empty, suitable for filling with oil. With tool-free activation and time-setting they allow easy, safe and accurate relubrication.

Flexible dispense rate from 1 to 12 months
ATEX zone 0 approved
Transparent lubricant container allows visual inspection of dispense rate
Compact size, suitable for restrictive areas
Improved reliability and optimized maintenance

Documents

⤓ Technical data sheet PDF

All Features

Power source: Gas cell
Maximum pressure: 5
Nominal emptying time: 1-12
Recommended storage temperature: 20 °C
Lubricant quantity: 60
Recommended applications: Fans and electric motors;Conveyor head and tail pulley bearings
Ambient temperature range: -20-60
Connecting thread: R 1/4
Intrinsically safe approval: II 1G Ex ia IIC T6 Ga, II 1D Ex ia IIIC T200 85°C Da, I M1 Ex ia I Ma
Lubricant operating temperature range: -30 to +140 °C
Lubricant description: Wide temperature range, extreme pressure, high load bearing grease
Degree of protection (ip): IP 68
Shelf life: 2
Lubricant: LGWA 2
Drive mechanism: Gas cell producing inert gas
Maximum feed line length: 0.3

Brand SKF
01900307
EAN 7316571363868
Supplier number SKF LAGD 60/WA2

Frequently asked questions about this product

Answered by specialists

How is this lubricator driven?: The unit is gas-driven by an internal gas cell producing inert gas, requiring no external power.
How do you adjust the dispense rate of the LAGD 60/WA2?: You adjust the dispense rate tool-free from 1 to 12 months using the dial on top.
What type of lubricant is included in this unit?: It is pre-filled with 60 ml of SKF LGWA 2 grease, formulated for wide temperature ranges and extreme pressure.
What is the connection thread size on this lubricator?: The unit has an R 1/4 connecting thread for direct mounting to the lubrication point.
Is this automatic lubricator approved for hazardous areas?: Yes, it is ATEX certified for use in zone 0 environments.