What are the dimensions of the SKF HK 1216.2RS needle roller bearing?

This drawn cup needle roller bearing has an inside diameter of 12 mm, an outside diameter of 18 mm, and a width of 16 mm.

Does this needle roller bearing come with an inner ring?

No, this bearing is designed without an inner ring. The needle rollers run directly on a hardened and ground shaft.

What type of seal does this bearing have?

The 2RS designation indicates that the bearing is fitted on both sides with an integral rubber contact seal against dirt and moisture.

Is the needle roller bearing pre-lubricated?

Yes, sealed SKF drawn cup needle roller bearings are supplied pre-filled with grease and ready for immediate installation.

What material is the cage made of?

The cage of this single-row drawn cup needle roller bearing is made of sheet steel.

SKF HK 1216.2RS Single-row needle roller bearing without inner ring 12 x 18 x 16 mm

Supplier number: SKF HK 1216.2RS | EAN 7316577043030

Recommended Retail Price €19.47

9.60 tax incl.

€7.93 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

High radial capacity with Skf engineering

Practical benefits

Extremely compact design: You can install this needle bearing in tight spaces thanks to its minimal cross-sectional height.
High radial load rating: You benefit from superior stiffness and heavy radial load performance due to the dense roller complement.
Integrated double contact seals: The built-in seals keep lubricants inside while protecting your assembly against dirt and contaminants.

In a nutshell

The right choise for

With the Skf hk 1216.2RS drawn cup needle roller bearing, you achieve an exceptionally compact and reliable bearing arrangement in tight spaces. Designed without an inner ring, this single-row bearing runs directly on a hardened and ground shaft to save critical radial space and weight. The pressed sheet steel cage and dense roller complement deliver high radial load ratings and superior stiffness for demanding gearboxes, pumps, and machinery. Thanks to integrated rubber contact seals on both sides, lubricant stays inside while dirt and moisture are kept out, ensuring smooth and long-lasting mechanical operation.

Product information FAQ

€9.60

In stock - tax incl.

Key features according to our expert

Inner diameter: 12 mm
Width: 16 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Material (cage): Sheet steel
Version (Needle cage): Open
Outer diameter: 18 mm

Product description

Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. Owing to their large number of rollers, the bearings have a high load carrying capacity and stiffness. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. Sealed bearings are delivered with an initial grease fill.

High radial load carrying capacity
High stiffness
Very low cross-sectional height
Sealed for increased reliability

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 12 mm
Width: 16 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Material (cage): Sheet steel
Version (needle cage): Open
Outer diameter: 18 mm
Basic static load rating: 7.35
Bearing part: Bearing without inner ring
Tolerance class: Normal
Aligning feature: Without
Sealing type: Contact
Bore diameter of needle roller complement: 12
Relubrication feature: Without
Lubricant: Grease
Number of flanges, outer ring: 2
Cage: Sheet steel
Sealing: Seal on both sides
Basic dynamic load rating: 6.27
Outer ring type: Drawn cup with open ends
Limiting speed: 10000
Coating: Without
Outer diameter: 18
Material, bearing: Bearing steel

Brand SKF
01291087
EAN 7316577043030
Supplier number SKF HK 1216.2RS

Frequently asked questions about this product

Answered by specialists

What are the dimensions of the SKF HK 1216.2RS needle roller bearing?: This drawn cup needle roller bearing has an inside diameter of 12 mm, an outside diameter of 18 mm, and a width of 16 mm.
Does this needle roller bearing come with an inner ring?: No, this bearing is designed without an inner ring. The needle rollers run directly on a hardened and ground shaft.
What type of seal does this bearing have?: The 2RS designation indicates that the bearing is fitted on both sides with an integral rubber contact seal against dirt and moisture.
Is the needle roller bearing pre-lubricated?: Yes, sealed SKF drawn cup needle roller bearings are supplied pre-filled with grease and ready for immediate installation.
What material is the cage made of?: The cage of this single-row drawn cup needle roller bearing is made of sheet steel.