What are the dimensions of this felt strip?

The SKF FS 330 has a length of 330 mm, a width of 7.5 mm, and a thickness of 7.5 mm.

What is the SKF FS 330 used for?

It serves as a felt seal for SKF bearing housings to retain lubricant and protect against contaminants.

How should you prepare the felt strip before installation?

Cut the strip to the correct length and soak it in hot oil prior to fitting.

Is this seal suitable for higher shaft speeds?

Yes, a small gap forms between the felt and the shaft, creating a non-contact seal suitable for relatively high speeds.

SKF FS 330 felt strip for bearing housing seal 7.5 mm

Supplier number: SKF FS 330 | EAN 7316577016751

5.43 tax incl.

€4.49 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable housing felt strip seal

Practical benefits

Effective barrier against dirt: You prevent contaminant ingress and retain lubricant within the bearing housing using this 7.5 mm thick felt strip.
Handles higher shaft speeds: Operating as a non-contact gap seal, it lets you maintain smooth performance even at elevated rotational speeds.
Simple custom length sizing: The 330 mm length allows you to cut the material easily to the exact dimensions needed for installation.

In a nutshell

The right choise for

Protect industrial bearing assemblies against premature wear and contamination with the Skf fs 330 felt strip. Measuring 7.5 mm in width and thickness, this seal forms a dependable barrier that retains lubricating grease within split bearing housings and plummer blocks while locking out dirt and particulate matter. The 330 mm length allows you to easily cut the exact size needed for your housing. Soaked in hot oil prior to installation, the felt strip forms a small gap around the shaft, operating as a non-contact seal suitable for higher rotational speeds. It delivers straightforward, durable sealing performance for all maintenance and overhaul tasks.

Product information FAQ

€5.43

In stock - tax incl.

Key features according to our expert

Thickness: 7,5 mm
Width: 7,5 mm
Length: 330 mm

Product description

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.

Cost-effective
Suitable for relatively high shaft speeds

Documents

⤓ Technical data sheet PDF

All Features

Thickness: 7,5 mm
Width: 7,5 mm
Length: 330 mm
Material: Felt
Sealing type: Felt
Accessory type: Housing seal

Brand SKF
01230188
EAN 7316577016751
Supplier number SKF FS 330

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this felt strip?: The SKF FS 330 has a length of 330 mm, a width of 7.5 mm, and a thickness of 7.5 mm.
What is the SKF FS 330 used for?: It serves as a felt seal for SKF bearing housings to retain lubricant and protect against contaminants.
How should you prepare the felt strip before installation?: Cut the strip to the correct length and soak it in hot oil prior to fitting.
Is this seal suitable for higher shaft speeds?: Yes, a small gap forms between the felt and the shaft, creating a non-contact seal suitable for relatively high speeds.