What types of loads can this angular contact ball bearing handle?

It accommodates combined radial and axial loads acting in one direction thanks to its 40° contact angle.

What are the exact dimensions of the SKF 7310 BEP?

The bearing has an inside diameter of 50 mm, an outside diameter of 110 mm, and a width of 27 mm.

What does the BEP suffix indicate?

BE designates an optimized internal design with a 40° contact angle, and P indicates a glass-fiber reinforced polyamide 66 cage.

Does this bearing come sealed or pre-lubricated?

No, this is an open bearing without seals and without pre-lubrication, allowing you to use your preferred lubricant.

Can a single bearing take axial loads in both directions?

No, a single-row angular contact bearing supports axial loads in one direction only; pair it with a second bearing for two directions.

SKF 7310 BEP single-row angular contact ball bearing 50 x 110 x 27 mm with contact angle 40°

Supplier number: SKF 7310 BEP | EAN 7316576634345

Recommended Retail Price €233.35

115.40 tax incl.

€95.37 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable load performance with Skf

Practical benefits

High combined load capacity: With a 40° contact angle, you easily accommodate simultaneous radial loads and heavy single-direction axial forces.
Smooth high-speed running: The lightweight polymer cage minimizes friction and vibration so you can maintain high rotational speeds safely.
Open design for lubrication: Built without seals, you can apply your preferred lubricant directly to suit specific operating conditions in machinery.

In a nutshell

The right choise for

With the Skf 7310 bep single-row angular contact ball bearing, you ensure dependable performance under demanding combined loads. Built with a 40° contact angle, it accommodates simultaneous radial forces and heavy single-direction axial thrust in industrial pumps, gearboxes, and compressors. The glass-fiber reinforced polyamide cage reduces friction, inertia, and vibration, allowing you to run smoothly at high rotational speeds. Its open, unsealed design provides the flexibility to apply the exact lubricant required for your specific machinery.

Product information FAQ

€115.40

In stock - tax incl.

Key features according to our expert

Inner diameter: 50 mm
Width: 27 mm
Number of rows: 1
Axial clearance: Not applicable
Sealing (bearing): Without seals
Material (bearing seal): Not applicable
Material (cage): Plastic
Outer diameter: 110 mm

Product description

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 50 mm
Width: 27 mm
Number of rows: 1
Axial clearance: Not applicable
Sealing (bearing): Without seals
Material (bearing seal): Not applicable
Material (cage): Plastic
Outer diameter: 110 mm
Basic static load rating: 47.5
Ring type: One-piece inner and outer rings
Tolerance class: Normal
Contact type: Normal contact (two-point contact)
Lubricant: None
Matched arrangement: No
Relubrication feature: Without
Reference speed: 7500
Sealing: Without
Cage: Non-metallic
Material, bearing: Bearing steel
Locating feature, bearing outer ring: None
Axial internal clearance: Not applicable
Contact angle: 40
Limiting speed: 7500
Bore diameter: 50
Basic dynamic load rating: 68.9
Coating: Without
Outer diameter: 110
Universal matching bearing: No

Brand SKF
01050073
EAN 7316576634345
Supplier number SKF 7310 BEP

Frequently asked questions about this product

Answered by specialists

What types of loads can this angular contact ball bearing handle?: It accommodates combined radial and axial loads acting in one direction thanks to its 40° contact angle.
What are the exact dimensions of the SKF 7310 BEP?: The bearing has an inside diameter of 50 mm, an outside diameter of 110 mm, and a width of 27 mm.
What does the BEP suffix indicate?: BE designates an optimized internal design with a 40° contact angle, and P indicates a glass-fiber reinforced polyamide 66 cage.
Does this bearing come sealed or pre-lubricated?: No, this is an open bearing without seals and without pre-lubrication, allowing you to use your preferred lubricant.
Can a single bearing take axial loads in both directions?: No, a single-row angular contact bearing supports axial loads in one direction only; pair it with a second bearing for two directions.