What are the dimensions of this tapered roller bearing?

The bore diameter is 35 mm, the outside diameter is 72 mm, and the total width is 18.25 mm.

What loads can the SKF 30207 J2/Q accommodate?

It is designed to handle combined radial loads and axial loads in one direction.

Can the inner ring be mounted separately from the outer ring?

Yes, the inner ring with rollers and cage is separable and interchangeable from the outer ring.

What is the contact angle of this bearing?

The contact angle of this SKF 30207 J2/Q bearing is 14°.

How do you achieve a rigid bearing arrangement?

You achieve a rigid arrangement by mounting two single row tapered roller bearings against each other with preload.

SKF 30207 J2/Q single-row tapered roller bearing 35 x 72 x 18.25 mm with contact angle 14°

Supplier number: SKF 30207 J2/Q | EAN 7316570514148

Recommended Retail Price €52.72

25.95 tax incl.

€21.45 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 4 products in stock.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Smooth load handling with Skf 30207 J2/Q

Practical benefits

Combined radial axial support: You manage simultaneous radial and axial forces effectively thanks to the precision 14° contact angle geometry.
Reduced friction in motion: Optimized raceway contact minimises heat generation and operational friction to keep your machinery running smoothly under heavy demands.
Easy mounting and inspection: The separable inner and outer rings allow you to install, adjust, and service individual components with minimal downtime.

In a nutshell

The right choise for

Keep your heavy-duty mechanical drives running smoothly and reliably with the Skf 30207 J2/Q single row tapered roller bearing. Designed with a precise 14° contact angle, it efficiently accommodates combined radial loads and single-direction axial loads to prevent shaft deflection and premature wear in wheel hubs, gearboxes, and reduction units. The precision-engineered raceways significantly reduce friction and heat generation, prolonging the service life of your machinery. Thanks to the separable inner and outer rings, you can install, adjust, and service this 35 x 72 x 18.25 mm bearing with minimal downtime.

Product information FAQ

€25.95

In stock - tax incl.

Key features according to our expert

Inner diameter: 35 mm
Width: 18,25 mm
Number of rows: 1
Outer diameter: 72 mm

Product description

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity
Accommodate axial loads in one direction
Low friction and long service life
Separable and interchangeable components

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 35 mm
Width: 18,25 mm
Number of rows: 1
Outer diameter: 72 mm
Arrangement of contact angle (double-row bearing): Not applicable
Bore type: Cylindrical
Cage: Sheet metal
Width, outer ring: 15
Lubricant: None
Reference speed: 7000
Relubrication feature: Without
Matched arrangement: No
Basic static load rating: 56
Bearing part: Complete bearing
Locating feature, bearing outer ring: None
Sealing: Without
Contact angle: 14.036111
Width, total: 18.25
Width, inner ring: 17
Limiting speed: 9500
Bore diameter: 35
Basic dynamic load rating: 55
Coating: Without
Outer diameter: 72
Unit system: Metric

Brand SKF
01110005
EAN 7316570514148
Supplier number SKF 30207 J2/Q

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this tapered roller bearing?: The bore diameter is 35 mm, the outside diameter is 72 mm, and the total width is 18.25 mm.
What loads can the SKF 30207 J2/Q accommodate?: It is designed to handle combined radial loads and axial loads in one direction.
Can the inner ring be mounted separately from the outer ring?: Yes, the inner ring with rollers and cage is separable and interchangeable from the outer ring.
What is the contact angle of this bearing?: The contact angle of this SKF 30207 J2/Q bearing is 14°.
How do you achieve a rigid bearing arrangement?: You achieve a rigid arrangement by mounting two single row tapered roller bearings against each other with preload.