r: 03030258 p: 8.223 pid: 87730 b: RENOLD q: 0 st: lt: 15 ean: 6623900897569 sr: RENOLD GY40A1S107I sr_no_br: GY40A1S107I sr_no_br_cl: GY40A1S107I sr_cl: RENOLDGY40A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,6 kg/m Height 2,1 Breaking strength 13900 N Length (pin) 16,4 mm Inside width 7,85 mm Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Product line Renold Synergy Type (ISO/ANSI) 40-1 Number of the connecting link 107 Version (link) Triplex n: RENOLD Synergy 40-1 rivet plywood 1/2 inch - GY40A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet plywood 1/2 inch kpn: Synergy 40-1 kpn_dash: Synergy 40 kpn_clear: Synergy401 bkpn: RENOLD Synergy 40-1 bkpn_clear: RENOLD Synergy401 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY40A1S107I sr_ns: RENOLDGY40A1S107I
r: 03030575 p: 8.223 pid: 89698 b: RENOLD q: 0 st: lt: 7 ean: 0673766032600 sr: RENOLD 12B1SNS26I sr_no_br: 12B1SNS26I sr_no_br_cl: 12B1SNS26I sr_cl: RENOLD12B1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 23,6 mm Product line Renold Syno Weight (kg/m) 1,3 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,5 Inside width 11,68 mm Breaking strength 28900 N Diameter (pin) 5,72 mm Thickness (inner plate) 2,42 mm Plate height 16 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 12B-1 SN No. 26 closing link simplex 3/4" - 12B1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 3/4" kpn: SYNO 12B-1 SN No. 26 kpn_dash: SYNO 12B kpn_clear: SYNO12B1SNNo26 bkpn: RENOLD SYNO 12B-1 SN No. 26 bkpn_clear: RENOLD SYNO12B1SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B1SNS26I sr_ns: RENOLD12B1SNS26I
r: 03050272 p: 8.223 pid: 87894 b: RENOLD q: 0 st: lt: 15 ean: 6623901137718 sr: RENOLD GY40A1S4I sr_no_br: GY40A1S4I sr_no_br_cl: GY40A1S4I sr_cl: RENOLDGY40A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Diameter (pin) 3,97 mm Product line Renold Synergy Number of the connecting link 4 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Thickness (outer plate) 1,55 mm Inside width 7,85 mm Thickness (inner plate) 1,55 mm Height 2,1 Type (ISO/ANSI) 40-1 Version (link) Simplex Breaking strength 13900 N Plate height 11,2 mm Diameter (roller) 7,92 mm n: RENOLD GY40A1S4I synergy 40-1 - simplex 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: synergy 40-1 - simplex 1/2 inch - inner link kpn: GY40A1S4I kpn_dash: kpn_clear: GY40A1S4I bkpn: RENOLD GY40A1S4I bkpn_clear: RENOLD GY40A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: GY40A1S4I sr_ns: RENOLDGY40A1S4I
r: 03030230 p: 8.223 pid: 89661 b: RENOLD q: 0 st: lt: 15 ean: 0673766002658 sr: RENOLD GY12B1S107I sr_no_br: GY12B1S107I sr_no_br_cl: GY12B1S107I sr_cl: RENOLDGY12B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 28900 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Synergy Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 12b-1 latch link simplex 3/4 inch - GY12B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: latch link simplex 3/4 inch kpn: Synergy 12b-1 kpn_dash: Synergy 12b kpn_clear: Synergy12b1 bkpn: RENOLD Synergy 12b-1 bkpn_clear: RENOLD Synergy12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY12B1S107I sr_ns: RENOLDGY12B1S107I
r: 03030113 p: 8.099 pid: 87688 b: RENOLD q: 0 st: lt: 8 ean: 6623901217861 sr: RENOLD 08B1S11I sr_no_br: 08B1S11I sr_no_br_cl: 08B1S11I sr_cl: RENOLD08B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,5 mm Product line Renold Blue Weight (kg/m) 0,7 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-1 Height 2 Inside width 7,75 mm Breaking strength 17800 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 08B-1 No. 11 closing link simplex 1/2" - 08B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/2" kpn: BLUE 08B-1 No. 11 kpn_dash: BLUE 08B kpn_clear: BLUE08B1No11 bkpn: RENOLD BLUE 08B-1 No. 11 bkpn_clear: RENOLD BLUE08B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B1S11I sr_ns: RENOLD08B1S11I
r: 03030423 p: 7.981 pid: 89732 b: RENOLD q: 0 st: lt: 15 ean: 0673766020287 sr: RENOLD 08B1SSS107I sr_no_br: 08B1SSS107I sr_no_br_cl: 08B1SSS107I sr_cl: RENOLD08B1SSS107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,7 kg/m Height 2 Breaking strength 12000 N Length (pin) 16,5 mm Inside width 7,75 mm Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Product line Renold Stainless Steel Type (ISO/ANSI) 08B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 08b-1 latch link simplex 1/2 inch - 08B1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: latch link simplex 1/2 inch kpn: Stainless Steel 08b-1 kpn_dash: Stainless Steel 08b kpn_clear: StainlessSteel08b1 bkpn: RENOLD Stainless Steel 08b-1 bkpn_clear: RENOLD StainlessSteel08b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 08B1SSS107I sr_ns: RENOLD08B1SSS107I
r: 02096700 p: 7.957 pid: 88569 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 111043S30I sr_no_br: 111043S30I sr_no_br_cl: 111043S30I sr_cl: RENOLD111043S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,13 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 11,4 mm Height 2 Thickness (outer plate) 0,98 mm Plate height 9,6 mm Version (link) Simplex Diameter (pin) 4,09 mm Diameter (roller) 7,75 mm Breaking strength 8900 N Inside width 4,88 mm n: RENOLD 111043S30I reducing link BLUE 111043 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 111043 - simplex 1/2 inch kpn: 111043S30I kpn_dash: kpn_clear: 111043S30I bkpn: RENOLD 111043S30I bkpn_clear: RENOLD 111043S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 111043S30I sr_ns: RENOLD111043S30I
r: 03050003 p: 7.92 pid: 88187 b: RENOLD q: 95 st: 1 lt: 1 ean: 0673766034819 sr: RENOLD 08B1S12I sr_no_br: 08B1S12I sr_no_br_cl: 08B1S12I sr_cl: RENOLD08B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD 08B1S12I reducer BLUE 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-1 - simplex 1/2 inch kpn: 08B1S12I kpn_dash: kpn_clear: 08B1S12I bkpn: RENOLD 08B1S12I bkpn_clear: RENOLD 08B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B1S12I sr_ns: RENOLD08B1S12I
r: 02096845 p: 7.764 pid: 89552 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A1S107I sr_no_br: 50A1S107I sr_no_br_cl: 50A1S107I sr_cl: RENOLD50A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 2,04 mm Weight (kg/m) 1 kg/m Height 2,7 Breaking strength 21800 N Length (pin) 20,4 mm Inside width 9,4 mm Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 50-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 50-1 rivet link simplex 5/8 inch - 50A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 5/8 inch kpn: Blue 50-1 kpn_dash: Blue 50 kpn_clear: Blue501 bkpn: RENOLD Blue 50-1 bkpn_clear: RENOLD Blue501 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 50A1S107I sr_ns: RENOLD50A1S107I
r: 03030012 p: 7.66 pid: 89560 b: RENOLD q: 3 st: 1 lt: 1 ean: 0673766006816 sr: RENOLD 10B2S26I sr_no_br: 10B2S26I sr_no_br_cl: 10B2S26I sr_cl: RENOLD10B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 35,4 mm Product line Renold Blue Weight (kg/m) 1,69 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-2 Height 2,5 Inside width 9,65 mm Breaking strength 44500 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 10B-2 No. 26 connecting link duplex 5/8" - 10B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 5/8" kpn: BLUE 10B-2 No. 26 kpn_dash: BLUE 10B kpn_clear: BLUE10B2No26 bkpn: RENOLD BLUE 10B-2 No. 26 bkpn_clear: RENOLD BLUE10B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B2S26I sr_ns: RENOLD10B2S26I
r: 03030387 p: 7.603 pid: 89668 b: RENOLD q: 0 st: lt: 15 ean: 6623901212330 sr: RENOLD 10B2S11I sr_no_br: 10B2S11I sr_no_br_cl: 10B2S11I sr_cl: RENOLD10B2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 35,4 mm Product line Renold Blue Weight (kg/m) 1,69 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-2 Height 2,5 Inside width 9,65 mm Breaking strength 44500 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 10B-2 No. 11 connecting link duplex 5/8" - 10B2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 5/8" kpn: BLUE 10B-2 No. 11 kpn_dash: BLUE 10B kpn_clear: BLUE10B2No11 bkpn: RENOLD BLUE 10B-2 No. 11 bkpn_clear: RENOLD BLUE10B2No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B2S11I sr_ns: RENOLD10B2S11I
r: 03030028 p: 7.364 pid: 87661 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A1S26I sr_no_br: 35A1S26I sr_no_br_cl: 35A1S26I sr_cl: RENOLD35A1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 12 mm Product line Renold Blue Weight (kg/m) 0,35 kg/m Thickness (outer plate) 1,29 mm Type (ISO/ANSI) 35-1 Height 1,7 Inside width 4,68 mm Breaking strength 7900 N Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 35-1 No. 26 closing link simplex 3/8" - 35A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/8" kpn: BLUE 35-1 No. 26 kpn_dash: BLUE 35 kpn_clear: BLUE351No26 bkpn: RENOLD BLUE 35-1 No. 26 bkpn_clear: RENOLD BLUE351No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 35A1S26I sr_ns: RENOLD35A1S26I
r: 03030010 p: 7.27 pid: 88355 b: RENOLD q: 10 st: 1 lt: 1 ean: 0673766006427 sr: RENOLD 06B2S26I sr_no_br: 06B2S26I sr_no_br_cl: 06B2S26I sr_cl: RENOLD06B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 23 mm Product line Renold Blue Weight (kg/m) 0,78 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-2 Height 1,3 Inside width 5,72 mm Breaking strength 16900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 06B-2 No. 26 master link duplex 3/8" - 06B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: master link duplex 3/8" kpn: BLUE 06B-2 No. 26 kpn_dash: BLUE 06B kpn_clear: BLUE06B2No26 bkpn: RENOLD BLUE 06B-2 No. 26 bkpn_clear: RENOLD BLUE06B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B2S26I sr_ns: RENOLD06B2S26I
r: 03050002 p: 7.13 pid: 88601 b: RENOLD q: 40 st: 1 lt: 1 ean: 0673766034765 sr: RENOLD 06B1S12I sr_no_br: 06B1S12I sr_no_br_cl: 06B1S12I sr_cl: RENOLD06B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD 06B1S12I reducer BLUE 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-1 - simplex 3/8 inch kpn: 06B1S12I kpn_dash: kpn_clear: 06B1S12I bkpn: RENOLD 06B1S12I bkpn_clear: RENOLD 06B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B1S12I sr_ns: RENOLD06B1S12I
r: 03050063 p: 7.13 pid: 89809 b: RENOLD q: 9 st: 1 lt: 1 ean: 0673766034772 sr: RENOLD 06B1S30I sr_no_br: 06B1S30I sr_no_br_cl: 06B1S30I sr_cl: RENOLD06B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD 06B1S30I reducer BLUE 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-1 - simplex 3/8 inch kpn: 06B1S30I kpn_dash: kpn_clear: 06B1S30I bkpn: RENOLD 06B1S30I bkpn_clear: RENOLD 06B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B1S30I sr_ns: RENOLD06B1S30I
r: 03030085 p: 6.93 pid: 89593 b: RENOLD q: 73 st: 1 lt: 1 ean: 0673766000982 sr: RENOLD GY06B1S26I sr_no_br: GY06B1S26I sr_no_br_cl: GY06B1S26I sr_cl: RENOLDGY06B1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 12,5 mm Product line Renold Synergy Weight (kg/m) 0,39 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-1 Height 1,3 Inside width 5,72 mm Breaking strength 8900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 06B-1 S No. 26 closing link simplex 3/8" - GY06B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 3/8" kpn: SYNERGY 06B-1 S No. 26 kpn_dash: SYNERGY 06B kpn_clear: SYNERGY06B1SNo26 bkpn: RENOLD SYNERGY 06B-1 S No. 26 bkpn_clear: RENOLD SYNERGY06B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY06B1S26I sr_ns: RENOLDGY06B1S26I
r: 03030027 p: 6.905 pid: 88044 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 25A1S26I sr_no_br: 25A1S26I sr_no_br_cl: 25A1S26I sr_cl: RENOLD25A1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/4 inch; 6,35 mm Length (pin) 7,9 mm Product line Renold Blue Weight (kg/m) 0,12 kg/m Thickness (outer plate) 0,76 mm Type (ISO/ANSI) 25-1 Height 1,2 Inside width 3,1 mm Breaking strength 3500 N Diameter (pin) 2,3 mm Thickness (inner plate) 0,76 mm Plate height 5,9 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 25-1 No. 26 closing link simplex 1/4" - 25A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/4" kpn: BLUE 25-1 No. 26 kpn_dash: BLUE 25 kpn_clear: BLUE251No26 bkpn: RENOLD BLUE 25-1 No. 26 bkpn_clear: RENOLD BLUE251No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 25A1S26I sr_ns: RENOLD25A1S26I
r: 02096747 p: 6.875 pid: 87773 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B1S4I sr_no_br: 12B1S4I sr_no_br_cl: 12B1S4I sr_cl: RENOLD12B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Diameter (pin) 5,72 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Thickness (outer plate) 1,81 mm Inside width 11,68 mm Thickness (inner plate) 1,81 mm Height 2,6 Type (ISO/ANSI) 12B-1 Version (link) Simplex Breaking strength 28900 N Plate height 16 mm Diameter (roller) 12,07 mm n: RENOLD 12B1S4I blue 12b-1 - simplex 3/4 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 12b-1 - simplex 3/4 inch - inner link kpn: 12B1S4I kpn_dash: kpn_clear: 12B1S4I bkpn: RENOLD 12B1S4I bkpn_clear: RENOLD 12B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 12B1S4I sr_ns: RENOLD12B1S4I
r: 02096748 p: 6.875 pid: 87994 b: RENOLD q: 0 st: lt: 15 ean: 0673766002641 sr: RENOLD 12B1S107I sr_no_br: 12B1S107I sr_no_br_cl: 12B1S107I sr_cl: RENOLD12B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 28900 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Blue Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 12b-1 latch link simplex 3/4 inch - 12B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 3/4 inch kpn: Blue 12b-1 kpn_dash: Blue 12b kpn_clear: Blue12b1 bkpn: RENOLD Blue 12b-1 bkpn_clear: RENOLD Blue12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 12B1S107I sr_ns: RENOLD12B1S107I
r: 02096831 p: 6.816 pid: 89764 b: RENOLD q: 0 st: lt: 15 ean: 0673766042456 sr: RENOLD 40A1S4I sr_no_br: 40A1S4I sr_no_br_cl: 40A1S4I sr_cl: RENOLD40A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Diameter (pin) 3,97 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Thickness (outer plate) 1,55 mm Inside width 7,85 mm Thickness (inner plate) 1,55 mm Height 2,1 Type (ISO/ANSI) 40-1 Version (link) Simplex Breaking strength 13900 N Plate height 11,2 mm Diameter (roller) 7,92 mm n: RENOLD 40A1S4I blue 40-1 - simplex 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 40-1 - simplex 1/2 inch - inner link kpn: 40A1S4I kpn_dash: kpn_clear: 40A1S4I bkpn: RENOLD 40A1S4I bkpn_clear: RENOLD 40A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 40A1S4I sr_ns: RENOLD40A1S4I
