r: 41983100 p: 174.71 pid: 39709 b: KUKKO q: 0 st: lt: 7 ean: 4021176016691 sr: KUKKO 45-3 sr_no_br: 45-3 sr_no_br_cl: 453 sr_cl: KUKKO453 sr_dash: KUKKO 45 sold: 1048.26 p_range: none type: standard act: 1 avo: 1 av: Max. width 160 mm Puller type Universel puller Hydraulical No Number of hooks 3 Max. height 160 mm n: KUKKO 45-3 tractor with three arms 160x160 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy, 3-armed industrial puller with power-assisted and self-centring puller hooks is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part sitting on a spindle and freely accessible from outside. When the spindle pressure is built up, the part to be loosened is clamped ever more tightly by the interconnected draw hooks. The 3-arm design guarantees even load distribution and therefore a particularly secure hold on the part to be pulled off. Application For pulling bearings, gears and pulleys in all common sizes for manual trades, workshops and industry. ds: dsc: Scope of delivery 44-3-206:Transverse bushing with spindle for 2-arm universal puller with self-centring hooks 45-3, 44-3 45-3-160-S:Tow hooks (set) for series 45 45-3-T:Bridge for 3-arm universal puller with self-centring hooks 45-3 616180:Double-sided spindle tip for Mechanical pressure spindles M16, M16x1.5 and M18x1.5 618210:Spindle Ø 18 mm for spindle Thread M 18x1.5, 210 mm length, 4.5 mm Screw thread kts: tractor with three arms 160x160 kpn: 45-3 kpn_dash: 45 kpn_clear: 453 bkpn: KUKKO 45-3 bkpn_clear: KUKKO 453 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 453 sr_ns: KUKKO45-3
r: 41294088 p: 347.066 pid: 98063 b: FACOM q: 0 st: lt: 8 ean: 3148510667003 sr: FACOM U.20 sr_no_br: U.20 sr_no_br_cl: U20 sr_cl: FACOMU20 sr_dash: sold: 1041.198 p_range: none type: standard act: 1 avo: 1 av: Max. width 170 mm Hydraulical No Number of hooks 2 Supplier warranty FACOM - Lifetime (R) Max. height 160 mm n: FACOM U.20 boot puller with short jaws cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Outside puller with short jaws Features Safety: the jaws are held in the correct position by the central nut on the roller bearing. The puller cannot detach from the roller bearing. Spindle with force limiter. A locking pin breaks when the permitted torque is exceeded. Spindle with 2 spare locking pins. Set of 3 spare locking pins: U.306-24J3. Equipped with a washer against turning along U.20-12. The ring protects the screw when a rod is used to prevent the trigger from turning with it. Adjustable attachment: stroke weight U.2. ds: dsc: kts: boot puller with short jaws kpn: U.20 kpn_dash: kpn_clear: U20 bkpn: FACOM U.20 bkpn_clear: FACOM U20 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom pullers / Facom pullers / Facom puller sr_no_br_cl_ns: U20 sr_ns: FACOMU.20
r: 41230049 p: 67.933 pid: 37528 b: KUKKO q: 0 st: lt: 4 ean: 4021176010736 sr: KUKKO 21-02 sr_no_br: 21-02 sr_no_br_cl: 2102 sr_cl: KUKKO2102 sr_dash: KUKKO 21 sold: 1018.995 p_range: none type: standard act: 1 avo: 1 av: For diameter 10-14 mm n: KUKKO 21-02 internal puller with 2 scales 10 to 14 mm cn: INTERNAL PULLER cn2: INTERNAL PULLER cn_clear: INTERNALPULLER d: Product description Series 21 inner pullers are used for pulling out internal bearings, bearing outer rings and bushings in Craft, workshop and Industry. The multi-part design of the inner pullers with their extra-large grip edges enables safe extraction of internal parts. Series 21 impresses with its compatibility and versatility in applications. Depending on the application, there are numerous variants of the optionally 2- or 3-shell inner pullers. They are used either together with Counter supports or with stroke pullers. Application For pulling out inner bearings, bearing outer rings and shaft holes in Craft, workshop and Industry. ds: dsc: Scope of delivery Optional extension:21-V-040 Extension for inner puller (40 mm extension, fixing thread M7):21-V-060 Extension / extensions for inner puller (60 mm extension / extensions, fixing thread M7):21-V-080 Extension / extensions for internal puller (80 mm Extension / extensions, fixing thread M7):22-0-05 Puller with 200 mm stroke, 0.5 kg stroke mass:22-1 Counter support, up to 60 mm clamping range, 115 mm clamping depth: kts: internal puller with 2 scales 10 to 14 mm kpn: 21-02 kpn_dash: 21 kpn_clear: 2102 bkpn: KUKKO 21-02 bkpn_clear: KUKKO 2102 c_path: Home / Tools / Hand tools / Pullers / Pullers / Internal puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko internal puller sr_no_br_cl_ns: 2102 sr_ns: KUKKO21-02
r: 41980031 p: 111.528 pid: 38203 b: KUKKO q: 0 st: lt: 4 ean: 4021176644856 sr: KUKKO 20-10+ sr_no_br: 20-10+ sr_no_br_cl: 2010 sr_cl: KUKKO2010 sr_dash: KUKKO 20 sold: 1003.752 p_range: none type: standard act: 1 avo: 1 av: Max. width 120 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 100 mm n: KUKKO 20-10+ two-arm trigger 120x100mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Based on the ingenuity and pioneering spirit of Alfred Kleinbongartz, the universal tractors with sliding, always parallel drawbars of the 20+ series get a functional upgrade. Operating comfort and user-friendliness take centre stage. Specifically, the following optimisations have been implemented: For even more flexibility when pulling, the tractor range has been extended by two sizes (20-0+ and 20-00+). This creates a clamping range of 0 to 350 mm and a maximum tractive force of 2.5 to 8.5 tonnes for external pullers. To increase the load capacity, the tractors are equipped with reinforced shoulders, creating a stable H-profile. This is thanks to the newly thought-out, innovative construction of the Bridge, which guarantees maximum stability even at high traction forces. Above the Bridge, as an orientation aid, there is a scale for even shifting of the towing hooks, enabling safe adjustment of the hooks. Below the Bridge is another six-digit number in addition to the part number of the Bridge for reorders. The first three digits indicate which spindle is compatible with the Bridge. The last three digits (xxx) indicate the variable spindle length, which varies between 85 mm and 600 mm depending on the version. In addition to mechanical spindles with a different thread length, grease hydraulic spindles can also be used - depending on the size of the tractor - as part of a Hydraulic Upgrade for light and controlled pulling of particularly stuck parts. An additional advantage are the two eyelets on the side of the Bridge for attaching a Safety Spring (Series 660), which additionally secures the tractor and ensures safe fixation during work or storage. The 2-arm universal pullers with quickly adjustable and robust Standard puller hooks are used for particularly safe pulling of bearings, gears and discs in all common sizes for craft, workshop and industry. With these, any part that is on a shaft and freely accessible from outside can be loosened. By simply reversing the tow hooks, the pullers can also be used as internal pullers. Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 1-92-P:Quick-adjustable standard hitch (pair, clamping depth 100 mm) 20-1-T:Bridge for 2-arm universal puller 20-1 20-10-T:Bridge for 2-arm universal puller 20-10 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614160:Spindle Ø 14 mm for spindle Thread M 14x1.5, 160 mm length, 4.5 mm Screw thread kts: two-arm trigger 120x100mm kpn: 20-10+ kpn_dash: 20 kpn_clear: 2010 bkpn: KUKKO 20-10+ bkpn_clear: KUKKO 2010 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2010 sr_ns: KUKKO20-10+
r: 41961583 p: 65.95 pid: 63030 b: GEDORE q: 0 st: lt: 3 ean: 4036976104172 sr: GEDORE 8000310 sr_no_br: 8000310 sr_no_br_cl: 8000310 sr_cl: GEDORE8000310 sr_dash: sold: 989.25 p_range: none type: standard act: 1 avo: 1 av: Max. width 130 mm Number of hooks 2 Max. height 100 mm Hydraulical No Puller type Universel puller n: GEDORE 1.06/1A universal puller 2-armed 130x100 mm - 8000310 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal puller 2-armed 130x100 mm kpn: 1.06/1A kpn_dash: kpn_clear: 1061A bkpn: GEDORE 1.06/1A bkpn_clear: GEDORE 1061A c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8000310 sr_ns: GEDORE8000310
r: 41230087 p: 135.867 pid: 37856 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176006616 sr: KUKKO 12-1 sr_no_br: 12-1 sr_no_br_cl: 121 sr_cl: KUKKO121 sr_dash: KUKKO 12 sold: 951.069 p_range: none type: standard act: 1 avo: 1 av: Max. width 100 mm Hydraulical No Number of hooks 3 Max. height 100 mm n: KUKKO 12-1 external trigger with three arms preset 100x100mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm puller "Alligator" with fixed pulling hooks and anti-slip device is used for pulling particularly stuck bearings, gears and discs in all common sizes for craft, workshop and industry. With it, any part that sits on a shaft and is freely accessible from outside can be loosened. Tightening the spanner automatically tightens the tow hooks centrally and firmly. This prevents the tow hooks from slipping or moving. Application For pulling particularly stuck bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 12-1-100-S:Tow hooks (set) for Alligator 12-1-206:Traverseninnenbuchsen with spindle for 3-arm puller "Alligator" with pre-adjustable tow hooks 12-1 12-1-8:Key for "Alligator" 12-1 12-1-T:Bridge for 3-arm pullers with presettable drawbar hooks 12-1 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614135:Spindle Ø 14 mm for spindle Thread M 14x1.5, 135 mm length, 4.5 mm Screw thread kts: external trigger with three arms preset 100x100mm kpn: 12-1 kpn_dash: 12 kpn_clear: 121 bkpn: KUKKO 12-1 bkpn_clear: KUKKO 121 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 121 sr_ns: KUKKO12-1
r: 01900009 p: 949.917 pid: 78879 b: SKF q: 0 st: lt: 8 ean: 7316572464748 sr: SKF TMMA 120 sr_no_br: TMMA 120 sr_no_br_cl: TMMA120 sr_cl: SKFTMMA120 sr_dash: sold: 949.917 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Hydraulical No Number of hooks 3 Max. height 250 mm n: SKF TMMA 120 EasyPull mechanical puller 75-250mm 250mm 120kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF EasyPull TMMA 120 is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 120 is mechanically operated and capable of withdrawal forces up to 120 kN for components with a maximum outer diameter of 250 mm (9.8 in). Unique red rings spring-operated opening mechanism allow the TMMA 120 to be placed behind the component with just one movement Self-centring capability and nosepiece help to avoid damage to shaft Self-locking arms help to prevent puller slipping under load Sturdy design allows safe dismounting of components in the tightest applications Hydraulic force generators TMHS 100 available as an accessory ds: dsc: Scope of delivery 1x Puller TMMA 120 with mechanical spindle 1x Tube of spindle grease LGEV2/0.035 1x Printed instructions for use kts: EasyPull mechanical puller 75-250mm 250mm 120kN kpn: TMMA 120 kpn_dash: kpn_clear: TMMA120 bkpn: SKF TMMA 120 bkpn_clear: SKF TMMA120 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMA120 sr_ns: SKFTMMA120
r: 41230058 p: 228.264 pid: 37833 b: KUKKO q: 0 st: lt: 2 ean: 4021176011986 sr: KUKKO 21-9 sr_no_br: 21-9 sr_no_br_cl: 219 sr_cl: KUKKO219 sr_dash: KUKKO 21 sold: 913.056 p_range: none type: standard act: 1 avo: 1 av: For diameter 70-100 mm n: KUKKO 21-9 internal puller with 2 scales 70 to 100 mm cn: INTERNAL PULLER cn2: INTERNAL PULLER cn_clear: INTERNALPULLER d: Product description Series 21 inner pullers are used for pulling out internal bearings, bearing outer rings and bushings in Craft, workshop and Industry. The multi-part design of the inner pullers with their extra-large grip edges enables safe extraction of internal parts. Series 21 impresses with its compatibility and versatility in applications. Depending on the application, there are numerous variants of either 2- or 3-shell inner pullers. They are used either together with Counter supports or with stroke pullers. Application For pulling out inner bearings, bearing outer rings and shaft holes in Craft, workshop and Industry. ds: dsc: Scope of delivery Optional extension:22-0-17 Impact trigger with 250 mm stroke travel, 1.7 kg Impact mass:22-3 Counter support, up to 180 mm clamping range, 280 mm clamping depth: kts: internal puller with 2 scales 70 to 100 mm kpn: 21-9 kpn_dash: 21 kpn_clear: 219 bkpn: KUKKO 21-9 bkpn_clear: KUKKO 219 c_path: Home / Tools / Hand tools / Pullers / Pullers / Internal puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko internal puller sr_no_br_cl_ns: 219 sr_ns: KUKKO21-9
r: 02063273 p: 228.264 pid: 37771 b: KUKKO q: 0 st: lt: 4 ean: 4021176645013 sr: KUKKO 20-20+ sr_no_br: 20-20+ sr_no_br_cl: 2020 sr_cl: KUKKO2020 sr_dash: KUKKO 20 sold: 913.056 p_range: none type: standard act: 1 avo: 1 av: Max. width 200 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 150 mm n: KUKKO 20-20+ tractor with two arms 200x150mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Based on the ingenuity and pioneering spirit of Alfred Kleinbongartz, the universal tractors with sliding, always parallel drawbars of the 20+ series get a functional upgrade. Operating comfort and user-friendliness take centre stage. Specifically, the following optimisations have been implemented: For even more flexibility when pulling, the tractor range has been extended by two sizes (20-0+ and 20-00+). This creates a clamping range of 0 to 350 mm and a maximum tractive force of 2.5 to 8.5 tonnes for external pullers. To increase the load capacity, the tractors are equipped with reinforced shoulders, creating a stable H-profile. This is thanks to the newly thought-out, innovative construction of the Bridge, which guarantees maximum stability even at high traction forces. Above the Bridge, as an orientation aid, there is a scale for even shifting of the towing hooks, enabling safe adjustment of the hooks. Below the Bridge is another six-digit number in addition to the part number of the Bridge for reorders. The first three digits indicate which spindle is compatible with the Bridge. The last three digits (xxx) indicate the variable spindle length, which varies between 85 mm and 600 mm depending on the version. In addition to mechanical spindles with a different thread length, grease hydraulic spindles can also be used - depending on the size of the tractor - as part of a Hydraulic Upgrade for light and controlled pulling of particularly stuck parts. An additional Advantage are the two eyes on the side of the Bridge for attaching a Safety Spring (Series 660), which additionally secures the tractor and ensures safe fixation during work or storage. The 2-arm universal pullers with quickly adjustable and robust Standard puller hooks are used for particularly safe pulling of bearings, gears and discs in all common sizes for craft, workshop and industry. With these, any part that is on a shaft and freely accessible from outside can be loosened. By simply reversing the tow hooks, the pullers can also be used as internal pullers. Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 2-152-P:Quick-adjustable standard hitch (pair, tension depth 150 mm) 20-20-T:Bridge for 2-arm universal puller 20-20 620260:Double-sided spindle tip for mechanical pressure spindles M20, G1/2", G5/8", G3/4" 621220:Spindle Ø 20.955 mm for spindle Thread G 1/2" / 14, 220 mm length, 5.4 mm Screw thread kts: tractor with two arms 200x150mm kpn: 20-20+ kpn_dash: 20 kpn_clear: 2020 bkpn: KUKKO 20-20+ bkpn_clear: KUKKO 2020 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2020 sr_ns: KUKKO20-20+
r: 01041269 p: 41.157 pid: 52236 b: GEDORE q: 0 st: lt: 6 ean: 4036976105315 sr: GEDORE 8013480 sr_no_br: 8013480 sr_no_br_cl: 8013480 sr_cl: GEDORE8013480 sr_dash: sold: 905.454 p_range: none type: standard act: 1 avo: 1 av: For diameter 19-25 mm n: GEDORE 1.30/4 inner puller 19-25 mm - 8013480 cn: INTERNAL PULLER cn2: INTERNAL PULLER cn_clear: INTERNALPULLER d: Product description For extremely tight-fitting ball bearings, rings, bushings and oil seals and Simmerings® Instructions for use Insert the internal extractor into the bearing and screw in the spindle The sharp cams of the shells press themselves behind the part to be removed Only then set up the counter support Align the feet parallel to the spindle to create a rigid unit Design may differ from image Can be used with a slide hammer or counter support ds: dsc: kts: inner puller 19-25 mm kpn: 1.30/4 kpn_dash: kpn_clear: 1304 bkpn: GEDORE 1.30/4 bkpn_clear: GEDORE 1304 c_path: Home / Tools / Hand tools / Pullers / Pullers / Internal puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore internal puller sr_no_br_cl_ns: 8013480 sr_ns: GEDORE8013480
r: 41231119 p: 225.95 pid: 60298 b: GEDORE q: 0 st: lt: 5 ean: 4036976106299 sr: GEDORE 1218980 sr_no_br: 1218980 sr_no_br_cl: 1218980 sr_cl: GEDORE1218980 sr_dash: sold: 903.8 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 200 mm n: GEDORE 1.06/3-E universal quick release chuck 2-armed 250x200 mm - 1218980 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Interchangeable hooks for several clamping depths are available as accessories Quick and uncomplicated setting and adjustment thanks to quick-release hooks Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal quick release chuck 2-armed 250x200 mm kpn: 1.06/3-E kpn_dash: 1.06/3 kpn_clear: 1063E bkpn: GEDORE 1.06/3-E bkpn_clear: GEDORE 1063E c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 1218980 sr_ns: GEDORE1218980
r: 41964445 p: 177.52 pid: 62481 b: GEDORE q: 0 st: lt: 6 ean: 4036976104202 sr: GEDORE 8000740 sr_no_br: 8000740 sr_no_br_cl: 8000740 sr_cl: GEDORE8000740 sr_dash: sold: 887.6 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Number of hooks 2 Max. height 200 mm Hydraulical No Puller type Universel puller n: GEDORE 1.06/3 universal puller 2-armed 250x200 mm - 8000740 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal puller 2-armed 250x200 mm kpn: 1.06/3 kpn_dash: kpn_clear: 1063 bkpn: GEDORE 1.06/3 bkpn_clear: GEDORE 1063 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8000740 sr_ns: GEDORE8000740
r: 41230037 p: 140.33 pid: 37516 b: KUKKO q: 0 st: lt: 2 ean: 4021176016363 sr: KUKKO 44-4 sr_no_br: 44-4 sr_no_br_cl: 444 sr_cl: KUKKO444 sr_dash: KUKKO 44 sold: 841.98 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 200 mm n: KUKKO 44-4 puller with two arms 250mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy 2-arm Industrial puller with pulling hooks that are force-amplifying and self-centring is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. With it, any part that is on a shaft and freely accessible from outside can be loosened. When the spindle pressure is built up, the part to be pulled is clamped tighter and tighter by the interconnected pulling hooks. Application For pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 44-4-200-P:Tow hooks (pair) for series 44 44-4-206:Transverse bushing with spindle for 2- and 3-arm universal puller with self-centring hooks 45-4, 44-4 44-4-T:2-arm inner bushing for 2-arm universal jointed drawbar with self-centring hooks 44-8, 44-7, 44-5, 44-6, 44-4 kts: puller with two arms 250mm kpn: 44-4 kpn_dash: 44 kpn_clear: 444 bkpn: KUKKO 44-4 bkpn_clear: KUKKO 444 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 444 sr_ns: KUKKO44-4
r: 01041265 p: 46.115 pid: 52233 b: GEDORE q: 0 st: lt: 6 ean: 4036976105292 sr: GEDORE 8013130 sr_no_br: 8013130 sr_no_br_cl: 8013130 sr_cl: GEDORE8013130 sr_dash: sold: 830.07 p_range: none type: standard act: 1 avo: 1 av: For diameter 15-19 mm Max. height 19 mm n: GEDORE 1.30/3 inner puller 15-19 mm - 8013130 cn: INTERNAL PULLER cn2: INTERNAL PULLER cn_clear: INTERNALPULLER d: Product description For extremely tight-fitting ball bearings, rings, bushings and oil seals and Simmerings® Instructions for use Insert the internal extractor into the bearing and screw in the spindle The sharp cams of the shells press themselves behind the part to be removed Only then set up the counter support Align the feet parallel to the spindle to create a rigid unit Design may differ from image Can be used with a slide hammer or counter support ds: dsc: kts: inner puller 15-19 mm kpn: 1.30/3 kpn_dash: kpn_clear: 1303 bkpn: GEDORE 1.30/3 bkpn_clear: GEDORE 1303 c_path: Home / Tools / Hand tools / Pullers / Pullers / Internal puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore internal puller sr_no_br_cl_ns: 8013130 sr_ns: GEDORE8013130
