Product Description:
- Phantom HSS Hand Taps ISO 529 UNC set of 3 pieces
- ISO 529, 60°
Supplier number:
PHANTOM 213000635
|
EAN
8716563258865
102.06
tax incl.
€84.35 excl. VAT (incl. all environmental contributions)
Accurate manual threading with Phantom
Practical benefits- Controlled step-by-step thread cutting: The three-piece set divides cutting pressure across stages so you create clean UNC 1/4"-20 threads with ease.
- High-speed steel durability: Crafted from robust HSS, these taps give you dependable wear resistance and sharp performance in general steels.
- Versatile hole threading capability: Featuring varying chamfer leads conforming to ISO 529, you can tap both through and blind holes smoothly.
In a nutshell
The right choise forWith the Phantom 21.300 three-piece hss hand tap set, you cut clean and accurate unc 1/4"-20 threads with a 20 tpi pitch. Containing a taper, second, and bottoming tap, this set divides the cutting load across three progressive stages to minimize breakage risk and ensure smooth control. Built from durable hss to the iso 529 standard, these taps perform reliably in general steels and non-ferrous metals. Whether repairing damaged imperial threads or cutting fresh threads in through and blind holes, you get dependable results every time.
Product information
Key features according to our expert
- Thread type: UNC
- Quantity per set: 3
- Pitch: 20 tpi
All Features
- Thread type
- UNC
- Quantity per set
- 3
- Pitch
- 20 tpi
- Tolerance d1 (tol. d1)
- 2B
- Pre-drilling diameter (ø)
- 5,1 mm
- Total length (l1)
- 66 mm
- Tool material
- HSS
- Flute length (l2)
- 19 mm
- Thread diameter (d1)
- UNC 1/4
- Square wide (sw)
- 5 mm
- Cutting direction
- Right
- Surface
- Bright
- Shank ø (d2)
- 6,3 mm
- Shank type
- Straight shank with square
- Standard
- ISO 529
- Pitch-inch (tpi)
- 20 Threads per inch
- Brand PHANTOM
- EAN 8716563258865
- Supplier number PHANTOM 213000635
Frequently asked questions about this product
Answered by specialists
- What type of thread does this tap set cut?
- This set cuts American coarse UNC 1/4" thread with a pitch of 20 threads per inch (20 TPI).
- What is included in this 3-piece tap set?
- It includes three HSS hand taps (taper, second, and bottoming) to cut the thread progressively.
- Which standard are these taps manufactured to?
- These hand taps are manufactured according to the ISO 529 standard.
- Which materials are these hand taps suitable for?
- Made from HSS, they are suitable for manual threading in general steel and non-ferrous metals.
- Can these taps be used for blind holes?
- Yes, the 3-step setup with the bottoming tap allows you to thread both through holes and blind holes.
Questions about this product?
Our product specialists are happy to help with any questions about this range. Call, email or chat with us!
Chat with us