r: 08079145 p: 28.76 pid: 41592 b: PFERD q: 0 st: lt: 8 ean: 4007220895733 sr: PFERD 44691630 sr_no_br: 44691630 sr_no_br_cl: 44691630 sr_cl: PFERD44691630 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Bore size 25,4 mm Width 3 mm Grit size Fine n: PFERD 44691630 POLINOX pressed fleece wheel PNER Ø 150x3 mm bore diameter 25.4 mm hard A fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 150x3 mm centre hole dia. 25.4 mm hard A fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations Hard version with very high stock removal rate, good edge strength and long tool life for tough deburring and polishing applications Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 150x3 mm bore diameter 25.4 mm hard A fine for finishing kpn: 44691630 kpn_dash: kpn_clear: 44691630 bkpn: PFERD 44691630 bkpn_clear: PFERD 44691630 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 44691630 sr_ns: PFERD44691630
r: 08079707 p: 28.71 pid: 34882 b: PFERD q: 0 st: lt: 8 ean: 4007220258408 sr: PFERD 36109010 sr_no_br: 36109010 sr_no_br_cl: 36109010 sr_cl: PFERD36109010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 9 mm Grit size B126 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD BZY-N 9,0-8/6 B 126 CBN cylindrical 9.0 mm shank Ø 6 mm B126 (mid.) for grinding bores/radii - 36109010 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CBN grinding point cylindrical dia. 9.0 mm shank dia. 6 mm B126 (medium) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: CBN cylindrical 9.0 mm shank Ø 6 mm B126 (mid.) for grinding bores/radii kpn: BZY-N 9,0-8/6 B 126 kpn_dash: BZY kpn_clear: BZYN9086B126 bkpn: PFERD BZY-N 9,0-8/6 B 126 bkpn_clear: PFERD BZYN9086B126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36109010 sr_ns: PFERD36109010
r: 57991599 p: 28.62 pid: 36394 b: PFERD q: 0 st: lt: 8 ean: 4007220530412 sr: PFERD 43505005 sr_no_br: 43505005 sr_no_br_cl: 43505005 sr_cl: PFERD43505005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted No Thickness 12 mm Max. no-load speed 6000 rpm Connection size (machine) 22,2 mm n: PFERD 15012/22,2 ST 0,25 round brush narrow untied RBU Ø 150 x 12 mm variable arbor hole steel wire-Ø 0.25 - 43505005 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 150x12xvariable hole steel wire dia. 0.25 Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush narrow untied RBU Ø 150 x 12 mm variable arbor hole steel wire-Ø 0.25 kpn: 15012/22,2 ST 0,25 kpn_dash: kpn_clear: 15012222ST025 bkpn: PFERD 15012/22,2 ST 0,25 bkpn_clear: PFERD 15012222ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505005 sr_ns: PFERD43505005
r: 08077928 p: 28.61 pid: 35497 b: PFERD q: 0 st: lt: 8 ean: 4007220003763 sr: PFERD 43312914 sr_no_br: 43312914 sr_no_br_cl: 43312914 sr_cl: PFERD43312914 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 20000 rpm Material (brush filament) Stainless steel n: PFERD KBG 10013/M14 INOX 0,50 disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder - 43312914 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 100x13 mm M14 stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder kpn: KBG 10013/M14 INOX 0,50 kpn_dash: kpn_clear: KBG10013M14INOX050 bkpn: PFERD KBG 10013/M14 INOX 0,50 bkpn_clear: PFERD KBG10013M14INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43312914 sr_ns: PFERD43312914
r: 08079149 p: 28.36 pid: 40898 b: PFERD q: 0 st: lt: 8 ean: 4007220895757 sr: PFERD 44691632 sr_no_br: 44691632 sr_no_br_cl: 44691632 sr_cl: PFERD44691632 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Bore size 25,4 mm Width 6 mm Grit size Fine n: PFERD 44691632 POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-diameter 25.4 mm medium-soft SIC fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 150x6 mm centre hole dia. 25.4 mm medium-soft SIC fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations Medium-hard version with increased edge strength and tool life for coarse blending and polishing tasks Well-suited for working on edges Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-diameter 25.4 mm medium-soft SIC fine for finishing kpn: 44691632 kpn_dash: kpn_clear: 44691632 bkpn: PFERD 44691632 bkpn_clear: PFERD 44691632 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 44691632 sr_ns: PFERD44691632
r: 08079612 p: 28.34 pid: 34831 b: PFERD q: 0 st: lt: 8 ean: 4007220258781 sr: PFERD 36206010 sr_no_br: 36206010 sr_no_br_cl: 36206010 sr_cl: PFERD36206010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Grit size D126 Shank size 3 mm Shape (grinding point) Sphere n: PFERD DKU-N 6,0/3 D 126 diamond-tipped ball point 6.0 mm shank dia. 3 mm D126 (medium) for engraving and deburring - 36206010 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point ball dia. 6.0 mm shank dia. 3 mm D126 (medium) for engraving and deburring Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The ball shape KU is often used in manual applications This shape is well-suited for engraving, contour grinding and deburring tasks N = non-stepped shank ds: dsc: kts: diamond-tipped ball point 6.0 mm shank dia. 3 mm D126 (medium) for engraving and deburring kpn: DKU-N 6,0/3 D 126 kpn_dash: DKU kpn_clear: DKUN603D126 bkpn: PFERD DKU-N 6,0/3 D 126 bkpn_clear: PFERD DKUN603D126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36206010 sr_ns: PFERD36206010
r: 02787967 p: 28.33 pid: 66626 b: PFERD q: 0 st: lt: 8 ean: 4007220936047 sr: PFERD 42002156 sr_no_br: 42002156 sr_no_br_cl: 42002156 sr_cl: PFERD42002156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Combiclick Bore size Perforated No For material Steel; Stainless steel; Non-ferrous metal Grit size Fine n: PFERD 42002156 COMBICLICK pressed fleece disc CC PNER Ø 125 mm medium-hard SiC, fine for finishing cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description PFERD COMBICLICK pressed non-woven disc CC PNER dia. 125 mm medium-hard SIC fine for finishing Characteristics The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool With the backing pad, COMBICLICK tools can be used on commercially available angle grinders The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material This design is ideal for achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing It is especially suitable for work on larger surfaces on components made of stainless steel (INOX) Advantages: The innovative quick-mounting system ensures convenient handling and cool grinding. Extremely quick and easy tool changes, which reduces process costs. Using COMBICLICK helps to avoid scratches caused by protruding clamping pieces, and exploits the abrasive material that is available. High edge strength thanks to extreme durability. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: COMBICLICK pressed fleece disc CC PNER Ø 125 mm medium-hard SiC, fine for finishing kpn: 42002156 kpn_dash: kpn_clear: 42002156 bkpn: PFERD 42002156 bkpn_clear: PFERD 42002156 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 42002156 sr_ns: PFERD42002156
r: 08078771 p: 28.27 pid: 68289 b: PFERD q: 0 st: lt: 8 ean: 4007220750360 sr: PFERD 42740007 sr_no_br: 42740007 sr_no_br_cl: 42740007 sr_cl: PFERD42740007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50 mm (Disc) attachment CD system Bore size Perforated No For material Steel; Stainless steel; Non-ferrous metal Grit size 60 n: PFERD 42740007 COMBIDISC diamond abrasive disc CD Ø 50 mm D251/P 60 for titanium, glass, GRP and stone cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description PFERD COMBIDISC diamond abrasive disc CD dia. 50mm D251/P 60 for titanium, glass, GRP and stone Characteristics Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc Particularly recommended for work on materials used for aircraft engine construction and for working on extremely hard materials Grit size according to ISO 6344: P 60 The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side Also suitable for the following commonly used systems: PSG, Power Lock Type II ""turn on"", SocAtt, Turn-On Advantages: High economic efficiency as tool can be changed quickly. Very comfortable due to ease of use and low-vibration working. No disruptions in use due to adhesion, slipping or coming loose. ds: dsc: kts: COMBIDISC diamond abrasive disc CD Ø 50 mm D251/P 60 for titanium, glass, GRP and stone kpn: 42740007 kpn_dash: kpn_clear: 42740007 bkpn: PFERD 42740007 bkpn_clear: PFERD 42740007 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 42740007 sr_ns: PFERD42740007
r: 03164142 p: 28.27 pid: 70563 b: PFERD q: 0 st: lt: 15 ean: 4007220806647 sr: PFERD 43105023 sr_no_br: 43105023 sr_no_br_cl: 43105023 sr_cl: PFERD43105023 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 4 mm Max. no-load speed 12000 rpm Connection size (machine) 6 mm n: PFERD 8004/6 INOX 0,20 round brush unturned RBU Ø 80 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43105023 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 80x4 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 80 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 8004/6 INOX 0,20 kpn_dash: kpn_clear: 80046INOX020 bkpn: PFERD 8004/6 INOX 0,20 bkpn_clear: PFERD 80046INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43105023 sr_ns: PFERD43105023
r: 08078790 p: 28.27 pid: 66868 b: PFERD q: 0 st: lt: 8 ean: 4007220750483 sr: PFERD 42758007 sr_no_br: 42758007 sr_no_br_cl: 42758007 sr_cl: PFERD42758007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50 mm (Disc) attachment CDR system Bore size Perforated No For material Stone; Glass; Metal Grit size 60 n: PFERD 42758007 COMBIDISC diamond abrasive disc CDR Ø 50 mm D251/P 60 for titanium, glass, GRP and stone cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description PFERD COMBIDISC diamond abrasive disc CDR dia. 50mm D251/P 60 for titanium, glass, GRP and stone Characteristics Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc Particularly recommended for work on materials used for aircraft engine construction and for working on extremely hard materials Grit size according to ISO 6344: P 60 The CDR clamping system has a threaded connection with male thread (plastic) on the tool side Also suitable for the following commonly used systems: Roloc, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On Advantages: High economic efficiency as tool can be changed quickly. Very comfortable due to ease of use and low-vibration working. No disruptions in use due to adhesion, slipping or coming loose. ds: dsc: kts: COMBIDISC diamond abrasive disc CDR Ø 50 mm D251/P 60 for titanium, glass, GRP and stone kpn: 42758007 kpn_dash: kpn_clear: 42758007 bkpn: PFERD 42758007 bkpn_clear: PFERD 42758007 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 42758007 sr_ns: PFERD42758007
r: 41961599 p: 28.25 pid: 34257 b: PFERD q: 0 st: lt: 6 ean: 4007220469231 sr: PFERD 44712121 sr_no_br: 44712121 sr_no_br_cl: 44712121 sr_cl: PFERD44712121 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 100 mm Grit size 120 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 10050/25,4 A 120 flap wheel 100x50 mm, bore Ø 25.4 mm, grain 120 for universal application - 44712121 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 100x50 mm centre hole dia. 25.4 mm A120 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 100x50 mm, bore Ø 25.4 mm, grain 120 for universal application kpn: FR 10050/25,4 A 120 kpn_dash: kpn_clear: FR10050254A120 bkpn: PFERD FR 10050/25,4 A 120 bkpn_clear: PFERD FR10050254A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44712121 sr_ns: PFERD44712121
r: 03206332 p: 28.25 pid: 34843 b: PFERD q: 0 st: lt: 6 ean: 4007220469224 sr: PFERD 44712081 sr_no_br: 44712081 sr_no_br_cl: 44712081 sr_cl: PFERD44712081 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 100 mm Grit size 80 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 10050/25,4 A 80 flap wheel 100x50 mm, bore Ø 25.4 mm, grit 80 for universal application - 44712081 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 100x50 mm centre hole dia. 25.4 mm A80 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 100x50 mm, bore Ø 25.4 mm, grit 80 for universal application kpn: FR 10050/25,4 A 80 kpn_dash: kpn_clear: FR10050254A80 bkpn: PFERD FR 10050/25,4 A 80 bkpn_clear: PFERD FR10050254A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44712081 sr_ns: PFERD44712081
r: 08078141 p: 28.21 pid: 34614 b: PFERD q: 0 st: lt: 8 ean: 4007220899403 sr: PFERD 43312503 sr_no_br: 43312503 sr_no_br_cl: 43312503 sr_cl: PFERD43312503 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 95 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,3 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Material (brush filament) Stainless steel n: PFERD KBU 9510/6 INOX 0,30 disk brush unturned Ø 95x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43312503 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm stainless steel wire dia. 0.30 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 95x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: KBU 9510/6 INOX 0,30 kpn_dash: kpn_clear: KBU95106INOX030 bkpn: PFERD KBU 9510/6 INOX 0,30 bkpn_clear: PFERD KBU95106INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43312503 sr_ns: PFERD43312503
r: 04023471 p: 28.2 pid: 38525 b: PFERD q: 0 st: lt: 8 ean: 4007220806814 sr: PFERD 43302131 sr_no_br: 43302131 sr_no_br_cl: 43302131 sr_cl: PFERD43302131 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Internal thread Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) M14 n: PFERD 11512/M14 CT ST 0,50 COMBITWIST round brush twisted RBG Ø 115 x 12 mm M14 steel wire-Ø 0.50 mm angle grinder - 43302131 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 115x12 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 115 x 12 mm M14 steel wire-Ø 0.50 mm angle grinder kpn: 11512/M14 CT ST 0,50 kpn_dash: kpn_clear: 11512M14CTST050 bkpn: PFERD 11512/M14 CT ST 0,50 bkpn_clear: PFERD 11512M14CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302131 sr_ns: PFERD43302131
r: 08079737 p: 28.1 pid: 64087 b: PFERD q: 0 st: lt: 8 ean: 4007220146408 sr: PFERD 45008503 sr_no_br: 45008503 sr_no_br_cl: 45008503 sr_cl: PFERD45008503 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 282 mm Material Felt Width 100 mm n: PFERD 45008503 polishing belt P-BA 100x282 mm for polishing roller Ø 90x100 mm with grinding roller machine cn: POLISHING BELT cn2: POLISHING BELT cn_clear: POLISHINGBELT d: Product description PFERD Polishing belt P-BA 100x282 mm for polishing work for drum dia. 90x100 mm with drum grinder Characteristics Suitable for polishing with polishing paste bars and grinding pastes on tubular constructions and railings Short belts are compatible with commonly available belt grinders Advantages: High economic efficiency due to high abrasive performance and long tool life. High tear strength with optimum flexibility. ds: dsc: kts: polishing belt P-BA 100x282 mm for polishing roller Ø 90x100 mm with grinding roller machine kpn: 45008503 kpn_dash: kpn_clear: 45008503 bkpn: PFERD 45008503 bkpn_clear: PFERD 45008503 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing belt sr_no_br_cl_ns: 45008503 sr_ns: PFERD45008503
r: 08079257 p: 28.07 pid: 34236 b: PFERD q: 0 st: lt: 8 ean: 4007220260982 sr: PFERD 36010009 sr_no_br: 36010009 sr_no_br_cl: 36010009 sr_cl: PFERD36010009 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size D91 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD DZY-N 10,0-8/6 D 91 diamond grinding point cylindrical 10.0 mm shank Ø 6 mm D91 (fine) for grinding bores/radii - 36010009 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical dia. 10.0 mm shank dia. 6 mm D91 (fine) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: diamond grinding point cylindrical 10.0 mm shank Ø 6 mm D91 (fine) for grinding bores/radii kpn: DZY-N 10,0-8/6 D 91 kpn_dash: DZY kpn_clear: DZYN10086D91 bkpn: PFERD DZY-N 10,0-8/6 D 91 bkpn_clear: PFERD DZYN10086D91 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36010009 sr_ns: PFERD36010009
r: 08079258 p: 28.07 pid: 35782 b: PFERD q: 0 st: lt: 8 ean: 4007220119280 sr: PFERD 36010010 sr_no_br: 36010010 sr_no_br_cl: 36010010 sr_cl: PFERD36010010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size D126 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD DZY-N 10,0-8/6 D 126 diamond grinding pin cylindrical 10 mm shank Ø 6 mm D126 (mid.) for grinding bores/radii - 36010010 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical dia. 10 mm shank dia. 6 mm D126 (medium) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: diamond grinding pin cylindrical 10 mm shank Ø 6 mm D126 (mid.) for grinding bores/radii kpn: DZY-N 10,0-8/6 D 126 kpn_dash: DZY kpn_clear: DZYN10086D126 bkpn: PFERD DZY-N 10,0-8/6 D 126 bkpn_clear: PFERD DZYN10086D126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36010010 sr_ns: PFERD36010010
