r: 08078072 p: 65.65 pid: 37144 b: PFERD q: 0 st: lt: 8 ean: 4007220808528 sr: PFERD 43300042 sr_no_br: 43300042 sr_no_br_cl: 43300042 sr_cl: PFERD43300042 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 11512/22,2 CT INOX 0,35 COMBITWIST INOX-TOTAL round brush RBGIT Ø 115x12x22.2 mm stainless steel wire-Ø 0.35 mm angle grinder - 43300042 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST INOX-TOTAL wheel brush RBGIT dia. 115x12x22.2 mm stainless steel wire dia. 0.35 mm angle grinders Characteristics Very aggressive brush Suitable for heavy-duty brushing such as removal of heat discolouration, deburring, cleaning of weld seams and removal of adhesive residues and spatter In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: COMBITWIST INOX-TOTAL round brush RBGIT Ø 115x12x22.2 mm stainless steel wire-Ø 0.35 mm angle grinder kpn: 11512/22,2 CT INOX 0,35 kpn_dash: kpn_clear: 11512222CTINOX035 bkpn: PFERD 11512/22,2 CT INOX 0,35 bkpn_clear: PFERD 11512222CTINOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43300042 sr_ns: PFERD43300042
r: 03206413 p: 65.16 pid: 32316 b: PFERD q: 0 st: lt: 8 ean: 4007220469262 sr: PFERD 44738061 sr_no_br: 44738061 sr_no_br_cl: 44738061 sr_cl: PFERD44738061 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 200 mm Grit size 60 Connection size (machine) 44 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 20050/44,0 A 60 flap wheel 200x50 mm, bore Ø 44 mm, grain 60 for universal application - 44738061 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel FR dia. 200x50mm centre hole dia. 44.0mm A60 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 200x50 mm, bore Ø 44 mm, grain 60 for universal application kpn: FR 20050/44,0 A 60 kpn_dash: kpn_clear: FR20050440A60 bkpn: PFERD FR 20050/44,0 A 60 bkpn_clear: PFERD FR20050440A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44738061 sr_ns: PFERD44738061
r: 08079473 p: 64.11 pid: 34886 b: PFERD q: 0 st: lt: 8 ean: 4007220157510 sr: PFERD 36476069 sr_no_br: 36476069 sr_no_br_cl: 36476069 sr_cl: PFERD36476069 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 24 mm Grit size D852 Shank size 8 mm Shape (grinding point) Rounded cylindrical Height 30 mm n: PFERD DWR-N 24-30/8 D 852 diamond grinding point round roller shape 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron - 36476069 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical with radius end 24x30x8 mm D852 for grinding grey and nodular cast iron Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding Diamond grinding points with grit size D 852 are exceptionally well-suited to machining grey cast iron and nodular cast iron (GG and GGG or GJL and GJS) N = non-stepped shank Advantages: Excellent tool life. Fast, aggressive grinding with maximum stock removal rate. Easy and quick elimination of metal contamination thanks to diamond as a super-hard abrasive. Lower dust load due to the dimensional stability of the grinding tool (no tool wear). ds: dsc: kts: diamond grinding point round roller shape 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron kpn: DWR-N 24-30/8 D 852 kpn_dash: DWR kpn_clear: DWRN24308D852 bkpn: PFERD DWR-N 24-30/8 D 852 bkpn_clear: PFERD DWRN24308D852 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36476069 sr_ns: PFERD36476069
r: 08079474 p: 64.11 pid: 34756 b: PFERD q: 0 st: lt: 8 ean: 4007220157565 sr: PFERD 36476072 sr_no_br: 36476072 sr_no_br_cl: 36476072 sr_cl: PFERD36476072 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 24 mm Grit size D852 Shank size 8 mm Shape (grinding point) Rounded cone Height 30 mm n: PFERD DKEL-N 24-30/8 D 852 diamond grinding point cone shape 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron - 36476072 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point conical 24x30x8 mm D852 for grinding grey and nodular cast iron Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding Diamond grinding points with grit size D 852 are exceptionally well-suited to machining grey cast iron and nodular cast iron (GG and GGG or GJL and GJS) N = non-stepped shank Advantages: Excellent tool life. Fast, aggressive grinding with maximum stock removal rate. Easy and quick elimination of metal contamination thanks to diamond as a super-hard abrasive. Lower dust load due to the dimensional stability of the grinding tool (no tool wear). ds: dsc: kts: diamond grinding point cone shape 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron kpn: DKEL-N 24-30/8 D 852 kpn_dash: DKEL kpn_clear: DKELN24308D852 bkpn: PFERD DKEL-N 24-30/8 D 852 bkpn_clear: PFERD DKELN24308D852 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36476072 sr_ns: PFERD36476072
r: 08079475 p: 64.11 pid: 33303 b: PFERD q: 0 st: lt: 8 ean: 4007220157435 sr: PFERD 36015022 sr_no_br: 36015022 sr_no_br_cl: 36015022 sr_cl: PFERD36015022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 24 mm Grit size D852 Shank size 8 mm Shape (grinding point) Cylinder Height 30 mm n: PFERD DZY-N 24-30/8 D 852 diamond grinding pin cylindrical 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron - 36015022 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical 24x30x8 mm D852 for grinding grey and nodular cast iron Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding Diamond grinding points with grit size D 852 are exceptionally well-suited to machining grey cast iron and nodular cast iron (GG and GGG or GJL and GJS) N = non-stepped shank Advantages: Excellent tool life. Fast, aggressive grinding with maximum stock removal rate. Easy and quick elimination of metal contamination thanks to diamond as a super-hard abrasive. Lower dust load due to the dimensional stability of the grinding tool (no tool wear). ds: dsc: kts: diamond grinding pin cylindrical 24x30x8 mm D852 for grinding grey/lamellar and ductile cast iron kpn: DZY-N 24-30/8 D 852 kpn_dash: DZY kpn_clear: DZYN24308D852 bkpn: PFERD DZY-N 24-30/8 D 852 bkpn_clear: PFERD DZYN24308D852 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36015022 sr_ns: PFERD36015022
r: 08077546 p: 63.16 pid: 34397 b: PFERD q: 0 st: lt: 8 ean: 4007220955147 sr: PFERD 43308042 sr_no_br: 43308042 sr_no_br_cl: 43308042 sr_cl: PFERD43308042 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,35 mm Material (brush filament) Stainless steel n: PFERD 43308042 cup brush knotted TBG Ø 100 mm M14 stainless steel wire dia. 0.35 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD Cup brush knotted TBG dia. 100 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: cup brush knotted TBG Ø 100 mm M14 stainless steel wire dia. 0.35 mm angle grinders kpn: 43308042 kpn_dash: kpn_clear: 43308042 bkpn: PFERD 43308042 bkpn_clear: PFERD 43308042 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43308042 sr_ns: PFERD43308042
r: 03180336 p: 63.02 pid: 69712 b: PFERD q: 0 st: lt: 8 ean: 4007220153628 sr: PFERD 43505001 sr_no_br: 43505001 sr_no_br_cl: 43505001 sr_cl: PFERD43505001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 38 mm Max. no-load speed 6000 rpm Connection size (machine) 31,8 mm n: PFERD 15038/AK32-2 ST 0,30 round brush wide untied RBU Ø 150 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding cup - 43505001 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 150x38xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed specially for industrial use Advantages: High economic efficiency due to very long tool life. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 150 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding cup kpn: 15038/AK32-2 ST 0,30 kpn_dash: 15038/AK32 kpn_clear: 15038AK322ST030 bkpn: PFERD 15038/AK32-2 ST 0,30 bkpn_clear: PFERD 15038AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505001 sr_ns: PFERD43505001
r: 08078001 p: 62.74 pid: 34489 b: PFERD q: 0 st: lt: 8 ean: 4007220956403 sr: PFERD 43701110 sr_no_br: 43701110 sr_no_br_cl: 43701110 sr_cl: PFERD43701110 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 28 mm Max. no-load speed 8000 rpm Connection size (machine) 30 mm n: PFERD 10028/14,0 INOX 0,30 round brush wide untied RBU Ø 100 x 28 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup - 43701110 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 100x28xvariable hole stainless steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 100 x 28 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup kpn: 10028/14,0 INOX 0,30 kpn_dash: kpn_clear: 10028140INOX030 bkpn: PFERD 10028/14,0 INOX 0,30 bkpn_clear: PFERD 10028140INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701110 sr_ns: PFERD43701110
r: 08077920 p: 62.42 pid: 34227 b: PFERD q: 0 st: lt: 8 ean: 4007220479681 sr: PFERD 44644129 sr_no_br: 44644129 sr_no_br_cl: 44644129 sr_cl: PFERD44644129 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Connection type (machine) Bore Width 50 mm Connection size (machine) 25,4 mm Grit size 280 n: PFERD PNL 15050/25,4 A 280 POLINOX fleece grinding wheel 150x50 mm, bore diameter 25.4 mm, 280 grit for fine grinding & finishing - 44644129 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD POLINOX non-woven unmounted grinding wheel PNL dia. 150x50 mm centre hole dia. 25.4 mm A280 for fine grinding and finishing Characteristics POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven abrasive flaps are arranged radially A long tool life is achieved through the dense packing of the flaps This tool is mainly used for work on large surfaces Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 150x50 mm, bore diameter 25.4 mm, 280 grit for fine grinding & finishing kpn: PNL 15050/25,4 A 280 kpn_dash: kpn_clear: PNL15050254A280 bkpn: PFERD PNL 15050/25,4 A 280 bkpn_clear: PFERD PNL15050254A280 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44644129 sr_ns: PFERD44644129
r: 03180312 p: 61.77 pid: 69708 b: PFERD q: 0 st: lt: 8 ean: 4007220892459 sr: PFERD 43502102 sr_no_br: 43502102 sr_no_br_cl: 43502102 sr_cl: PFERD43502102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Inner thread Material (brush filament) Steel wire Wire thickness 0,6 mm Twisted No Thickness 20 mm Max. no-load speed 6000 rpm Connection size (machine) M14 n: PFERD 10020/M14 SC ST 0,60 POLISCRATCH round brush unturned RBU Ø 100 x 20 mm M14 steel wire-Ø 0.60 angle grinder - 43502102 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders Characteristics Excellent for processing and removing soft materials such as underseal and anti-drumming compound Most suitable for achieving rough surfaces with a sandblasted appearance due to the specific geometry of the filament material Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: High cooling effect and no smearing or loading of the brush due to the open construction of the filament material. Longer tool life as the brush can be resharpened using a sharpening block. Long tool life through use of PFERD special wire. ds: dsc: kts: POLISCRATCH round brush unturned RBU Ø 100 x 20 mm M14 steel wire-Ø 0.60 angle grinder kpn: 10020/M14 SC ST 0,60 kpn_dash: kpn_clear: 10020M14SCST060 bkpn: PFERD 10020/M14 SC ST 0,60 bkpn_clear: PFERD 10020M14SCST060 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43502102 sr_ns: PFERD43502102
r: 03180395 p: 61.53 pid: 69511 b: PFERD q: 0 st: lt: 8 ean: 4007220530443 sr: PFERD 43506505 sr_no_br: 43506505 sr_no_br_cl: 43506505 sr_cl: PFERD43506505 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted No Thickness 20 mm Max. no-load speed 3600 rpm Connection size (machine) 22,2 mm n: PFERD 25020/22,2 ST 0,25 Round brush narrow untied RBU Ø 250 x 20 mm variable arbor hole steel wire-Ø 0.25 - 43506505 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 250x20xvariable hole steel wire dia. 0.25 Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: Round brush narrow untied RBU Ø 250 x 20 mm variable arbor hole steel wire-Ø 0.25 kpn: 25020/22,2 ST 0,25 kpn_dash: kpn_clear: 25020222ST025 bkpn: PFERD 25020/22,2 ST 0,25 bkpn_clear: PFERD 25020222ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506505 sr_ns: PFERD43506505
r: 03163600 p: 61.27 pid: 70005 b: PFERD q: 0 st: lt: 6 ean: 4007220003718 sr: PFERD 43308044 sr_no_br: 43308044 sr_no_br_cl: 43308044 sr_cl: PFERD43308044 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Stainless steel n: PFERD 43308044 cup brush knotted TBG Ø 100 mm M14 stainless steel wire dia. 0.50 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD cup brush knotted TBG dia. 100mm M14 stainless steel wire dia. 0.50mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: cup brush knotted TBG Ø 100 mm M14 stainless steel wire dia. 0.50 mm angle grinders kpn: 43308044 kpn_dash: kpn_clear: 43308044 bkpn: PFERD 43308044 bkpn_clear: PFERD 43308044 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43308044 sr_ns: PFERD43308044
r: 04023610 p: 61.16 pid: 38966 b: PFERD q: 0 st: lt: 10 ean: 4007220593486 sr: PFERD 43317013 sr_no_br: 43317013 sr_no_br_cl: 43317013 sr_cl: PFERD43317013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Inner thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 12515/M14 CT INOX 0,35 Combitwist disc brush twisted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm - 43317013 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 125x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: Combitwist disc brush twisted Ø 125x15 mm M14 stainless steel wire-Ø 0.35 mm kpn: POS KBG 12515/M14 CT INOX 0,35 kpn_dash: kpn_clear: POSKBG12515M14CTINOX035 bkpn: PFERD POS KBG 12515/M14 CT INOX 0,35 bkpn_clear: PFERD POSKBG12515M14CTINOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317013 sr_ns: PFERD43317013
r: 04021991 p: 61.16 pid: 35711 b: PFERD q: 0 st: lt: 8 ean: 4007220354001 sr: PFERD 36431057 sr_no_br: 36431057 sr_no_br_cl: 36431057 sr_cl: PFERD36431057 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size D357 Shank size 6 mm Shape (grinding point) Rounded cylindrical Height 20 mm n: PFERD DWR-N 10,0-20/6 D 357 diamond grinding point round roller shape 10.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CFK - 36431057 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical with radius end dia. 10.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CRP Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape with radius end WR is best suited to manual applications and can be used for a wide variety of deburring and grinding tasks Coarse grit size D 357 is exceptionally well-suited for use on fibre-reinforced plastics (GRP/CRP) N = non-stepped shank ds: dsc: kts: diamond grinding point round roller shape 10.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CFK kpn: DWR-N 10,0-20/6 D 357 kpn_dash: DWR kpn_clear: DWRN100206D357 bkpn: PFERD DWR-N 10,0-20/6 D 357 bkpn_clear: PFERD DWRN100206D357 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36431057 sr_ns: PFERD36431057
r: 02911220 p: 60.41 pid: 33986 b: PFERD q: 0 st: lt: 8 ean: 4007220955956 sr: PFERD 36431026 sr_no_br: 36431026 sr_no_br_cl: 36431026 sr_cl: PFERD36431026 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size D126 Shank size 6 mm Shape (grinding point) Rounded cylindrical Height 20 mm n: PFERD DWR-N 10,0-20/6 D 126 diamond-tipped round roller shape 10.0 mm shank Ø 6 mm D126 (mid.) ideal for manual use - 36431026 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical with radius end dia. 10.0 mm shank dia. 6 mm D126 (medium) ideal for manual application Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape with radius end WR is best suited to manual applications and can be used for a wide variety of deburring and grinding tasks N = non-stepped shank ds: dsc: kts: diamond-tipped round roller shape 10.0 mm shank Ø 6 mm D126 (mid.) ideal for manual use kpn: DWR-N 10,0-20/6 D 126 kpn_dash: DWR kpn_clear: DWRN100206D126 bkpn: PFERD DWR-N 10,0-20/6 D 126 bkpn_clear: PFERD DWRN100206D126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36431026 sr_ns: PFERD36431026
