r: 08077708 p: 105.78 pid: 35078 b: PFERD q: 0 st: lt: 8 ean: 4007220070383 sr: PFERD 43214121 sr_no_br: 43214121 sr_no_br_cl: 43214121 sr_cl: PFERD43214121 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 25 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBUPR 2528/6 SiC 120 0,55 Composite brush Ø 28 mm shank-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 stationary - 43214121 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD COMPOSITE end brush PBUPR dia. 28 mm shank dia. 6 mm SiC filament dia. 0.55 mm grit 120 stationary Characteristics Particularly suitable for deburring and work on surfaces on stationary machines Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The bridle prevents the wires spreading out sideways. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. The bridle enables the spreading out and flexibility of the brush filament to be controlled. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: Composite brush Ø 28 mm shank-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 stationary kpn: PBUPR 2528/6 SiC 120 0,55 kpn_dash: kpn_clear: PBUPR25286SiC120055 bkpn: PFERD PBUPR 2528/6 SiC 120 0,55 bkpn_clear: PFERD PBUPR25286SiC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43214121 sr_ns: PFERD43214121
r: 08077709 p: 105.78 pid: 35372 b: PFERD q: 0 st: lt: 8 ean: 4007220070369 sr: PFERD 43214122 sr_no_br: 43214122 sr_no_br_cl: 43214122 sr_cl: PFERD43214122 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 25 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 1 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBUPR 2528/6 SiC 120 1,00 Composite brush Ø 28 mm shank-Ø 6 mm SiC filament wire-Ø 1.00 mm grit 120 stationary - 43214122 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD COMPOSITE end brush PBUPR dia. 28 mm shank dia. 6 mm SiC filament dia. 1.00 mm grit 120 stationary Characteristics Particularly suitable for deburring and work on surfaces on stationary machines Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The bridle prevents the wires spreading out sideways. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. The bridle enables the spreading out and flexibility of the brush filament to be controlled. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: Composite brush Ø 28 mm shank-Ø 6 mm SiC filament wire-Ø 1.00 mm grit 120 stationary kpn: PBUPR 2528/6 SiC 120 1,00 kpn_dash: kpn_clear: PBUPR25286SiC120100 bkpn: PFERD PBUPR 2528/6 SiC 120 1,00 bkpn_clear: PFERD PBUPR25286SiC120100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43214122 sr_ns: PFERD43214122
r: 03239704 p: 104.25 pid: 34040 b: PFERD q: 0 st: lt: 8 ean: 4007220037980 sr: PFERD 39009715 sr_no_br: 39009715 sr_no_br_cl: 39009715 sr_cl: PFERD39009715 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 300 mm Grit size 36 Bore size 76,2 mm Thickness 40 mm n: PFERD BW 30040-76,2 AN 36 UNIVERSAL grinding cup stone Ø 300x40 mm bore Ø 76 mm A36 for universal grinding tasks - 39009715 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Bench grinding wheel dia. 300x40 mm centre hole dia. 76 mm A36 for general grinding work Characteristics PFERD bench grinding wheels have been adapted to the standard bench grinders on the market The UNIVERSAL version is ideal for general use in the workshop Advantages: Long tool life. High dimensional stability. High abrasive performance. Integrated adapter sleeves for mounting on almost any bench grinder spindle. ds: dsc: kts: grinding cup stone Ø 300x40 mm bore Ø 76 mm A36 for universal grinding tasks kpn: BW 30040-76,2 AN 36 UNIVERSAL kpn_dash: BW 30040 kpn_clear: BW30040762AN36UNIVERSAL bkpn: PFERD BW 30040-76,2 AN 36 UNIVERSAL bkpn_clear: PFERD BW30040762AN36UNIVERSAL c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 39009715 sr_ns: PFERD39009715
r: 08078043 p: 103.54 pid: 34527 b: PFERD q: 0 st: lt: 8 ean: 4007220220733 sr: PFERD 43304003 sr_no_br: 43304003 sr_no_br_cl: 43304003 sr_cl: PFERD43304003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) 22,2 mm n: PFERD 17813/22,2 INOX 0,35 round brush twisted RBG Ø 178 x 13 x 22,2 mm stainless steel wire-Ø 0,35 mm angle grinders - 43304003 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 178x13x22.2 mm stainless steel wire dia. 0.35 mm angle grinders Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 178 x 13 x 22,2 mm stainless steel wire-Ø 0,35 mm angle grinders kpn: 17813/22,2 INOX 0,35 kpn_dash: kpn_clear: 17813222INOX035 bkpn: PFERD 17813/22,2 INOX 0,35 bkpn_clear: PFERD 17813222INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304003 sr_ns: PFERD43304003
r: 08078046 p: 103.54 pid: 35359 b: PFERD q: 0 st: lt: 8 ean: 4007220659038 sr: PFERD 43304010 sr_no_br: 43304010 sr_no_br_cl: 43304010 sr_cl: PFERD43304010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Internal thread Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) M14 n: PFERD 17813/M14 INOX 0,35 round brush twisted RBG Ø 178 x 13 mm M14 stainless steel wire-Ø 0.35 mm angle grinders - 43304010 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 178x13 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams, removal of adhesive residues and spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 178 x 13 mm M14 stainless steel wire-Ø 0.35 mm angle grinders kpn: 17813/M14 INOX 0,35 kpn_dash: kpn_clear: 17813M14INOX035 bkpn: PFERD 17813/M14 INOX 0,35 bkpn_clear: PFERD 17813M14INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304010 sr_ns: PFERD43304010
r: 08079783 p: 103.16 pid: 65809 b: PFERD q: 0 st: lt: 8 ean: 4007220066232 sr: PFERD 45011705 sr_no_br: 45011705 sr_no_br_cl: 45011705 sr_cl: PFERD45011705 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 75 mm Length 2500 mm Grit size 180 n: PFERD 45011705 fleece grinding belt VB 75x2500 mm A180 M for fine grinding & finishing with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Non-woven abrasive belt VB 75x2500 mm A180 M for fine grinding and finishing with a belt grinder Characteristics Suitable for general work on metal surfaces in stationary applications, e.g. removing rough grinding traces, removing oxidation and light deburring work Achieve matt and satin-finished surfaces Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" POLIVLIES grit size 180 M = medium (red-brown) Advantages: High economic efficiency due to high abrasive performance and long tool life. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. ds: dsc: kts: fleece grinding belt VB 75x2500 mm A180 M for fine grinding & finishing with belt grinder kpn: 45011705 kpn_dash: kpn_clear: 45011705 bkpn: PFERD 45011705 bkpn_clear: PFERD 45011705 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45011705 sr_ns: PFERD45011705
r: 08079316 p: 101.8 pid: 34807 b: PFERD q: 0 st: lt: 8 ean: 4007220956014 sr: PFERD 36161151 sr_no_br: 36161151 sr_no_br_cl: 36161151 sr_cl: PFERD36161151 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Grit size B151 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD BZY-N 12,0-8/6 HM B 151 CBN cylindrical 12.0 mm HM shank Ø 6 mm B151 (coarse) for stationary indoor grinding - 36161151 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CBN grinding point cylindrical dia. 12.0 mm TC shank dia. 6 mm B151 (coarse) for stationary internal grinding Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding Cylindrical mounted points with tungsten carbide shanks are used for internal grinding on stationary machines The modulus of elasticity of the tungsten carbide shank is approximately three times higher than that of a steel shank The modulus of elasticity indicates the amount of deformation a body undergoes as a result of a given load In internal grinding applications, tools with a tungsten carbide shank offer higher stock removal rates, superior surfaces and more precise shape and position tolerances N = non-stepped shank ds: dsc: kts: CBN cylindrical 12.0 mm HM shank Ø 6 mm B151 (coarse) for stationary indoor grinding kpn: BZY-N 12,0-8/6 HM B 151 kpn_dash: BZY kpn_clear: BZYN12086HMB151 bkpn: PFERD BZY-N 12,0-8/6 HM B 151 bkpn_clear: PFERD BZYN12086HMB151 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36161151 sr_ns: PFERD36161151
r: 08078050 p: 101.01 pid: 35371 b: PFERD q: 0 st: lt: 8 ean: 4007220956496 sr: PFERD 43701240 sr_no_br: 43701240 sr_no_br_cl: 43701240 sr_cl: PFERD43701240 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 INOX 0,30 POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup - 43701240 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POS wheel brush wide crimped RBU dia. 180x25xvariable hole stainless steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup kpn: 18025/AK32-2 INOX 0,30 kpn_dash: 18025/AK32 kpn_clear: 18025AK322INOX030 bkpn: PFERD 18025/AK32-2 INOX 0,30 bkpn_clear: PFERD 18025AK322INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701240 sr_ns: PFERD43701240
r: 02709613 p: 100.58 pid: 68982 b: PFERD q: 0 st: lt: 8 ean: 4007220003633 sr: PFERD 43304018 sr_no_br: 43304018 sr_no_br_cl: 43304018 sr_cl: PFERD43304018 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) 22,2 mm n: PFERD 17813/22,2 CT INOX 0,50 COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm stainless steel wire-Ø 0.50 mm angle grinder - 43304018 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 178x13x22.2 mm stainless steel wire dia. 0.50 mm angle grinders Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm stainless steel wire-Ø 0.50 mm angle grinder kpn: 17813/22,2 CT INOX 0,50 kpn_dash: kpn_clear: 17813222CTINOX050 bkpn: PFERD 17813/22,2 CT INOX 0,50 bkpn_clear: PFERD 17813222CTINOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304018 sr_ns: PFERD43304018
r: 03239723 p: 100.16 pid: 34069 b: PFERD q: 0 st: lt: 8 ean: 4007220038130 sr: PFERD 39009729 sr_no_br: 39009729 sr_no_br_cl: 39009729 sr_cl: PFERD39009729 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 250 mm Grit size 80 Bore size 51 mm Thickness 32 mm n: PFERD BW 25032-51 CN 80 CARBIDE grinding block Ø 250x32 mm bore Ø 51 mm SiC80 for hard materials (e.g. carbide) - 39009729 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Bench grinding wheel dia. 250x32 mm centre hole dia. 51 mm SiC80 for hard materials e.g. tungsten carbide Characteristics PFERD bench grinding wheels have been adapted to the standard bench grinders on the market The CARBIDE type is used on hard materials, such as for sharpening tungsten carbide tools Advantages: Long tool life. High dimensional stability. High abrasive performance. Integrated adapter sleeves for mounting on almost any bench grinder spindle. ds: dsc: kts: grinding block Ø 250x32 mm bore Ø 51 mm SiC80 for hard materials (e.g. carbide) kpn: BW 25032-51 CN 80 CARBIDE kpn_dash: BW 25032 kpn_clear: BW2503251CN80CARBIDE bkpn: PFERD BW 25032-51 CN 80 CARBIDE bkpn_clear: PFERD BW2503251CN80CARBIDE c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 39009729 sr_ns: PFERD39009729
r: 08078034 p: 99.99 pid: 34524 b: PFERD q: 0 st: lt: 8 ean: 4007220069707 sr: PFERD 43701181 sr_no_br: 43701181 sr_no_br_cl: 43701181 sr_cl: PFERD43701181 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 15025/AK32-2 SiC 120 0,55 round brush wide unturned RBU Ø 150x25 vari. asg. SiC filament wire-Ø 0,55 mm grit 120 grinding cup - 43701181 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush wide crimped RBU dia. 150x25xvari. hole SiC filament dia. 0.55 mm grit 120 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush wide unturned RBU Ø 150x25 vari. asg. SiC filament wire-Ø 0,55 mm grit 120 grinding cup kpn: 15025/AK32-2 SiC 120 0,55 kpn_dash: 15025/AK32 kpn_clear: 15025AK322SiC120055 bkpn: PFERD 15025/AK32-2 SiC 120 0,55 bkpn_clear: PFERD 15025AK322SiC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701181 sr_ns: PFERD43701181
r: 08078035 p: 99.99 pid: 37131 b: PFERD q: 0 st: lt: 8 ean: 4007220069691 sr: PFERD 43701182 sr_no_br: 43701182 sr_no_br_cl: 43701182 sr_cl: PFERD43701182 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,1 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 15025/AK32-2 SiC 120 1,10 round brush wide untied RBU Ø 150x25 vari. asg. SiC filament wire-Ø 1,10mm grit 120 grinding cup - 43701182 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 150x25xvari. hole SiC filament dia. 1.10mm grit 120 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush wide untied RBU Ø 150x25 vari. asg. SiC filament wire-Ø 1,10mm grit 120 grinding cup kpn: 15025/AK32-2 SiC 120 1,10 kpn_dash: 15025/AK32 kpn_clear: 15025AK322SiC120110 bkpn: PFERD 15025/AK32-2 SiC 120 1,10 bkpn_clear: PFERD 15025AK322SiC120110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701182 sr_ns: PFERD43701182
r: 08078036 p: 99.99 pid: 35347 b: PFERD q: 0 st: lt: 8 ean: 4007220069714 sr: PFERD 43701183 sr_no_br: 43701183 sr_no_br_cl: 43701183 sr_cl: PFERD43701183 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 15025/AK32-2 SiC 320 0,55 round brush wide unturned RBU Ø 150x25 vari. asg. SiC filament wire-Ø 0,55 mm grit 320 grinding cup - 43701183 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush wide crimped RBU dia. 150x25xvari. hole SiC filament dia. 0.55 mm grit 320 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush wide unturned RBU Ø 150x25 vari. asg. SiC filament wire-Ø 0,55 mm grit 320 grinding cup kpn: 15025/AK32-2 SiC 320 0,55 kpn_dash: 15025/AK32 kpn_clear: 15025AK322SiC320055 bkpn: PFERD 15025/AK32-2 SiC 320 0,55 bkpn_clear: PFERD 15025AK322SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701183 sr_ns: PFERD43701183
r: 03180364 p: 99.49 pid: 69505 b: PFERD q: 0 st: lt: 8 ean: 4007220807248 sr: PFERD 43505904 sr_no_br: 43505904 sr_no_br_cl: 43505904 sr_cl: PFERD43505904 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 13 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 20013/50,8 SIC 120 0,55 round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.55 mm grit 120 stat. - 43505904 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 200x13x50.8 mm hole SiC filament dia. 0.55 mm grit 120 stationary Characteristics Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Ideal for processing aluminium due to the longer trim length and higher degree of flexibility Suitable for use on stationary machines, automated centres and robots Advantages: The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.55 mm grit 120 stat. kpn: 20013/50,8 SIC 120 0,55 kpn_dash: kpn_clear: 20013508SIC120055 bkpn: PFERD 20013/50,8 SIC 120 0,55 bkpn_clear: PFERD 20013508SIC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505904 sr_ns: PFERD43505904
r: 03180365 p: 99.49 pid: 69718 b: PFERD q: 0 st: lt: 8 ean: 4007220807255 sr: PFERD 43505914 sr_no_br: 43505914 sr_no_br_cl: 43505914 sr_cl: PFERD43505914 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,9 mm Twisted No Thickness 13 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 20013/50,8 SIC 180 0,90 round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.90 grit 180 stationary - 43505914 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 200x13x50.8 mm hole SiC filament dia. 0.90 grit 180 stationary Characteristics Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Ideal for processing aluminium due to the longer trim length and higher degree of flexibility Suitable for use on stationary machines, automated centres and robots Advantages: The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.90 grit 180 stationary kpn: 20013/50,8 SIC 180 0,90 kpn_dash: kpn_clear: 20013508SIC180090 bkpn: PFERD 20013/50,8 SIC 180 0,90 bkpn_clear: PFERD 20013508SIC180090 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505914 sr_ns: PFERD43505914
r: 03180366 p: 99.49 pid: 69507 b: PFERD q: 0 st: lt: 8 ean: 4007220807262 sr: PFERD 43505924 sr_no_br: 43505924 sr_no_br_cl: 43505924 sr_cl: PFERD43505924 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 13 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 20013/50,8 SIC 320 0,55 round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.55 mm grit 320 stat. - 43505924 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 200x13x50.8 mm hole SiC filament dia. 0.55 mm grit 320 stationary Characteristics Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Ideal for processing aluminium due to the longer trim length and higher degree of flexibility Suitable for use on stationary machines, automated centres and robots Advantages: The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole SiC filament wire-Ø 0.55 mm grit 320 stat. kpn: 20013/50,8 SIC 320 0,55 kpn_dash: kpn_clear: 20013508SIC320055 bkpn: PFERD 20013/50,8 SIC 320 0,55 bkpn_clear: PFERD 20013508SIC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505924 sr_ns: PFERD43505924
r: 41980033 p: 98.08 pid: 35165 b: PFERD q: 0 st: lt: 6 ean: 4007220530474 sr: PFERD 43506007 sr_no_br: 43506007 sr_no_br_cl: 43506007 sr_cl: PFERD43506007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1 mm Twisted No Thickness 16 mm Max. no-load speed 4500 rpm Connection size (machine) 22,2 mm n: PFERD 20016/22,2 SIC 80 1,00 round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole SiC filament wire-Ø 0.90 grit 80 - 43506007 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 200x16xvariable hole SiC filament dia. 0.90 grit 80 Characteristics Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole SiC filament wire-Ø 0.90 grit 80 kpn: 20016/22,2 SIC 80 1,00 kpn_dash: kpn_clear: 20016222SIC80100 bkpn: PFERD 20016/22,2 SIC 80 1,00 bkpn_clear: PFERD 20016222SIC80100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506007 sr_ns: PFERD43506007
