r: 08078327 p: 1.76 pid: 65119 b: PFERD q: 0 st: lt: 8 ean: 4007220664704 sr: PFERD 45005224 sr_no_br: 45005224 sr_no_br_cl: 45005224 sr_cl: PFERD45005224 sr_dash: sold: 35.2 p_range: none type: standard act: 1 avo: 1 av: Width 35 mm Length 450 mm Grit size 240 n: PFERD 45005224 corundum grinding belt BA 35x450 mm A240 for universal use with pipe grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 35x450mm A240 for general use with a pipe belt grinder Characteristics For general applications from coarse to fine grinding Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 35x450 mm A240 for universal use with pipe grinder kpn: 45005224 kpn_dash: kpn_clear: 45005224 bkpn: PFERD 45005224 bkpn_clear: PFERD 45005224 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005224 sr_ns: PFERD45005224
r: 08079322 p: 34.85 pid: 33740 b: PFERD q: 0 st: lt: 8 ean: 4007220261019 sr: PFERD 36012018 sr_no_br: 36012018 sr_no_br_cl: 36012018 sr_cl: PFERD36012018 sr_dash: sold: 34.85 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Grit size D181 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD DZY-N 12,0-8/6 D 181 diamond grinding pin cylindrical 12 mm shank Ø 6 mm D181 (coarse) for grinding bores/radii - 36012018 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical dia. 12 mm shank dia. 6 mm D181 (coarse) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: diamond grinding pin cylindrical 12 mm shank Ø 6 mm D181 (coarse) for grinding bores/radii kpn: DZY-N 12,0-8/6 D 181 kpn_dash: DZY kpn_clear: DZYN12086D181 bkpn: PFERD DZY-N 12,0-8/6 D 181 bkpn_clear: PFERD DZYN12086D181 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36012018 sr_ns: PFERD36012018
r: 04024759 p: 3.46 pid: 36533 b: PFERD q: 0 st: lt: 4 ean: 4007220621073 sr: PFERD 45005562 sr_no_br: 45005562 sr_no_br_cl: 45005562 sr_cl: PFERD45005562 sr_dash: sold: 34.6 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 1000 mm Grit size 120 n: PFERD 45005562 corundum grinding belt BA 50x1000 mm A120 for universal use with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 50x1000mm A120 for general use with a belt grinder Characteristics For general applications from coarse to fine grinding Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 50x1000 mm A120 for universal use with belt grinder kpn: 45005562 kpn_dash: kpn_clear: 45005562 bkpn: PFERD 45005562 bkpn_clear: PFERD 45005562 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005562 sr_ns: PFERD45005562
r: 57072155 p: 3.43 pid: 33531 b: PFERD q: 0 st: lt: 8 ean: 4007220102138 sr: PFERD 32107254 sr_no_br: 32107254 sr_no_br_cl: 32107254 sr_cl: PFERD32107254 sr_dash: sold: 34.3 p_range: none type: standard act: 1 avo: 1 av: Diameter 13 mm Grit size 46 Shank size 6 mm Shape (grinding point) Cylinder/Pointed arch Height 20 mm n: PFERD SP 1320 6 ADW 46 M5V pointed archstone 13x20 mm shank Ø 6 mm A46 for steel and cast steel - 32107254 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point pointed tree dia. 13x20 mm shank dia. 6 mm A46 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The pointed tree shape SP is suitable for machining small holes and bores Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: pointed archstone 13x20 mm shank Ø 6 mm A46 for steel and cast steel kpn: SP 1320 6 ADW 46 M5V kpn_dash: kpn_clear: SP13206ADW46M5V bkpn: PFERD SP 1320 6 ADW 46 M5V bkpn_clear: PFERD SP13206ADW46M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32107254 sr_ns: PFERD32107254
r: 03208816 p: 3.42 pid: 32430 b: PFERD q: 0 st: lt: 4 ean: 4007220102213 sr: PFERD 44415060 sr_no_br: 44415060 sr_no_br_cl: 44415060 sr_cl: PFERD44415060 sr_dash: sold: 34.2 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 3015/6 SiC 60 flap brushes silicon carbide 30x15 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals - 44415060 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 30x15 mm shank dia. 6 mm SIC60 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 30x15 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals kpn: F 3015/6 SiC 60 kpn_dash: kpn_clear: F30156SiC60 bkpn: PFERD F 3015/6 SiC 60 bkpn_clear: PFERD F30156SiC60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44415060 sr_ns: PFERD44415060
r: 03206935 p: 6.72 pid: 36772 b: PFERD q: 0 st: lt: 10 ean: 4007220294239 sr: PFERD 44271506 sr_no_br: 44271506 sr_no_br_cl: 44271506 sr_cl: PFERD44271506 sr_dash: sold: 33.6 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm n: PFERD 44271506 rag disc TR flannel 150x10mm bore 20mm for mirror polishing & shining with polishing paste cn: POLISHING WHEEL cn2: POLISHING WHEEL cn_clear: POLISHINGWHEEL d: Product description PFERD Cloth ring TR flannel dia. 150x10 mm centre hole dia. 20 mm for mirror polishing and buffing with polishing paste Characteristics Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes If the intention is to achieve very smooth surface finishes, use several or even all variants successively FL (flannel) version for high-gloss polishing and buffing Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. ds: dsc: kts: rag disc TR flannel 150x10mm bore 20mm for mirror polishing & shining with polishing paste kpn: 44271506 kpn_dash: kpn_clear: 44271506 bkpn: PFERD 44271506 bkpn_clear: PFERD 44271506 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing wheel sr_no_br_cl_ns: 44271506 sr_ns: PFERD44271506
r: 08079321 p: 33.2 pid: 34629 b: PFERD q: 0 st: lt: 8 ean: 4007220261002 sr: PFERD 36012009 sr_no_br: 36012009 sr_no_br_cl: 36012009 sr_cl: PFERD36012009 sr_dash: sold: 33.2 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Grit size D91 Shank size 6 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD DZY-N 12,0-8/6 D 91 diamond grinding pin cylindrical 12 mm shank Ø 6 mm D91 (fine) for grinding bores/radii - 36012009 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Diamond grinding point cylindrical dia. 12 mm shank dia. 6 mm D91 (fine) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: diamond grinding pin cylindrical 12 mm shank Ø 6 mm D91 (fine) for grinding bores/radii kpn: DZY-N 12,0-8/6 D 91 kpn_dash: DZY kpn_clear: DZYN12086D91 bkpn: PFERD DZY-N 12,0-8/6 D 91 bkpn_clear: PFERD DZYN12086D91 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36012009 sr_ns: PFERD36012009
r: 08078289 p: 1.64 pid: 65084 b: PFERD q: 0 st: lt: 8 ean: 4007220620359 sr: PFERD 45005142 sr_no_br: 45005142 sr_no_br_cl: 45005142 sr_cl: PFERD45005142 sr_dash: sold: 32.8 p_range: none type: standard act: 1 avo: 1 av: Width 30 mm Length 533 mm Grit size 40 n: PFERD 45005142 corundum grinding belt BA 30x533 mm A40 for universal use with pipe grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Aluminium oxide abrasive belt BA 30x533 mm A40 for general use with a pipe belt grinder Characteristics For general applications from coarse to fine grinding Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 30x533 mm A40 for universal use with pipe grinder kpn: 45005142 kpn_dash: kpn_clear: 45005142 bkpn: PFERD 45005142 bkpn_clear: PFERD 45005142 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005142 sr_ns: PFERD45005142
r: 04024140 p: 3.27 pid: 34979 b: PFERD q: 0 st: lt: 8 ean: 4007220292679 sr: PFERD 44410156 sr_no_br: 44410156 sr_no_br_cl: 44410156 sr_cl: PFERD44410156 sr_dash: sold: 32.7 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 25 mm Connection type (machine) Shank Width 25 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 2525/6 A 150 flap brushes corundum 25x25 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44410156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 25x25 mm shank dia. 6 mm A150 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 25x25 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 2525/6 A 150 kpn_dash: kpn_clear: F25256A150 bkpn: PFERD F 2525/6 A 150 bkpn_clear: PFERD F25256A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44410156 sr_ns: PFERD44410156
r: 57072082 p: 3.27 pid: 32498 b: PFERD q: 0 st: lt: 8 ean: 4007220659908 sr: PFERD 31120258 sr_no_br: 31120258 sr_no_br_cl: 31120258 sr_cl: PFERD31120258 sr_dash: sold: 32.7 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size 80 Shank size 6 mm Shape (grinding point) Cylinder Height 32 mm n: PFERD ZY 1032 6 ADW 80 M5V shank cylindrical 10x32 mm shank Ø 6 mm A80 for steel and cast steel - 31120258 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point cylindrical dia. 10x32 mm shank dia. 6 mm A80 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: shank cylindrical 10x32 mm shank Ø 6 mm A80 for steel and cast steel kpn: ZY 1032 6 ADW 80 M5V kpn_dash: kpn_clear: ZY10326ADW80M5V bkpn: PFERD ZY 1032 6 ADW 80 M5V bkpn_clear: PFERD ZY10326ADW80M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31120258 sr_ns: PFERD31120258
r: 57072593 p: 3.25 pid: 32130 b: PFERD q: 0 st: lt: 8 ean: 4007220118009 sr: PFERD 35682278 sr_no_br: 35682278 sr_no_br_cl: 35682278 sr_cl: PFERD35682278 sr_dash: sold: 32.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size 80 Shank size 3 mm Shape (grinding point) Sphere Height 10 mm n: PFERD B 122 3 AR 80 O5V Shank shape B 122 10x10 mm Pin Ø 3 mm A80 for steel and cast steel - 35682278 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 122 dia. 10x10 mm shank dia. 3 mm A80 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: Shank shape B 122 10x10 mm Pin Ø 3 mm A80 for steel and cast steel kpn: B 122 3 AR 80 O5V kpn_dash: kpn_clear: B1223AR80O5V bkpn: PFERD B 122 3 AR 80 O5V bkpn_clear: PFERD B1223AR80O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35682278 sr_ns: PFERD35682278
r: 57072597 p: 3.25 pid: 34625 b: PFERD q: 0 st: lt: 8 ean: 4007220118030 sr: PFERD 35685270 sr_no_br: 35685270 sr_no_br_cl: 35685270 sr_cl: PFERD35685270 sr_dash: sold: 32.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Grit size 100 Shank size 3 mm Shape (grinding point) Sphere Height 6 mm n: PFERD B 125 3 AR 100 O5V shank shape B 125 6x6.3 mm shank Ø 3 mm A100 for steel and cast steel - 35685270 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 125 dia. 6x6.3 mm shank dia. 3 mm A100 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank shape B 125 6x6.3 mm shank Ø 3 mm A100 for steel and cast steel kpn: B 125 3 AR 100 O5V kpn_dash: kpn_clear: B1253AR100O5V bkpn: PFERD B 125 3 AR 100 O5V bkpn_clear: PFERD B1253AR100O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35685270 sr_ns: PFERD35685270
r: 57072585 p: 3.25 pid: 32061 b: PFERD q: 0 st: lt: 8 ean: 4007220117880 sr: PFERD 35665270 sr_no_br: 35665270 sr_no_br_cl: 35665270 sr_cl: PFERD35665270 sr_dash: sold: 32.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Grit size 100 Shank size 3 mm Shape (grinding point) Trapezium Height 6 mm n: PFERD B 105 3 AR 100 O5V Shaped B 105 6x6 mm Pin Ø 3 mm A100 for steel and cast steel - 35665270 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 105 dia. 6x6 mm shank dia. 3 mm A100 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: Shaped B 105 6x6 mm Pin Ø 3 mm A100 for steel and cast steel kpn: B 105 3 AR 100 O5V kpn_dash: kpn_clear: B1053AR100O5V bkpn: PFERD B 105 3 AR 100 O5V bkpn_clear: PFERD B1053AR100O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35665270 sr_ns: PFERD35665270
r: 57072580 p: 3.25 pid: 32125 b: PFERD q: 0 st: lt: 8 ean: 4007220117811 sr: PFERD 35657270 sr_no_br: 35657270 sr_no_br_cl: 35657270 sr_cl: PFERD35657270 sr_dash: sold: 32.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 2 mm Grit size 100 Shank size 3 mm Shape (grinding point) Shallow cone Height 10 mm n: PFERD B 97 3 AR 100 O5V shank shape B 97 3x10 mm shank Ø 3 mm A100 for steel and cast steel - 35657270 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 97 dia. 3x10 mm shank dia. 3 mm A100 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank shape B 97 3x10 mm shank Ø 3 mm A100 for steel and cast steel kpn: B 97 3 AR 100 O5V kpn_dash: kpn_clear: B973AR100O5V bkpn: PFERD B 97 3 AR 100 O5V bkpn_clear: PFERD B973AR100O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35657270 sr_ns: PFERD35657270
r: 08078268 p: 1.6 pid: 65543 b: PFERD q: 0 st: lt: 10 ean: 4007220620342 sr: PFERD 45009402 sr_no_br: 45009402 sr_no_br_cl: 45009402 sr_cl: PFERD45009402 sr_dash: sold: 32 p_range: none type: standard act: 1 avo: 1 av: Width 20 mm Length 520 mm Grit size 36 n: PFERD 45009402 zirconium grinding belt BA 20x520 mm Z36 for high removal with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Zirkon abrasive belt BA 20x520mm Z36 for high stock removal with a belt grinder Characteristics For coarse grinding work with a high stock removal rate and a long tool life Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: zirconium grinding belt BA 20x520 mm Z36 for high removal with belt grinder kpn: 45009402 kpn_dash: kpn_clear: 45009402 bkpn: PFERD 45009402 bkpn_clear: PFERD 45009402 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45009402 sr_ns: PFERD45009402
r: 03209262 p: 3.18 pid: 32501 b: PFERD q: 0 st: lt: 8 ean: 4007220035177 sr: PFERD 47802249 sr_no_br: 47802249 sr_no_br_cl: 47802249 sr_cl: PFERD47802249 sr_dash: sold: 31.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 3020/6 A 150 flap brushes corundum 30x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 47802249 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x20 mm shank dia. 6 mm A150 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 3020/6 A 150 kpn_dash: kpn_clear: F30206A150 bkpn: PFERD F 3020/6 A 150 bkpn_clear: PFERD F30206A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47802249 sr_ns: PFERD47802249
r: 03209255 p: 3.18 pid: 32589 b: PFERD q: 0 st: lt: 8 ean: 4007220035207 sr: PFERD 47802252 sr_no_br: 47802252 sr_no_br_cl: 47802252 sr_cl: PFERD47802252 sr_dash: sold: 31.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 3020/6 A 320 flap brushes corundum 30x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 47802252 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x20 mm shank dia. 6 mm A320 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 3020/6 A 320 kpn_dash: kpn_clear: F30206A320 bkpn: PFERD F 3020/6 A 320 bkpn_clear: PFERD F30206A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47802252 sr_ns: PFERD47802252
r: 08077999 p: 30.78 pid: 35008 b: PFERD q: 0 st: lt: 8 ean: 4007220003787 sr: PFERD 43313006 sr_no_br: 43313006 sr_no_br_cl: 43313006 sr_cl: PFERD43313006 sr_dash: sold: 30.78 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Internal thread Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 20000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 10013/M14 INOX 0,50 disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder - 43313006 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 100x13 mm M14 stainless steel wire dia. 0.50 mm angle grinders (1) Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: disk brush twisted Ø 100x13 mm M14 stainless steel wire-Ø 0.50 mm for angle grinder kpn: POS KBG 10013/M14 INOX 0,50 kpn_dash: kpn_clear: POSKBG10013M14INOX050 bkpn: PFERD POS KBG 10013/M14 INOX 0,50 bkpn_clear: PFERD POSKBG10013M14INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43313006 sr_ns: PFERD43313006
r: 57090021 p: 3.07 pid: 33117 b: PFERD q: 17 st: 1 lt: 1 ean: 4007220155240 sr: PFERD 44506066 sr_no_br: 44506066 sr_no_br_cl: 44506066 sr_cl: PFERD44506066 sr_dash: sold: 30.7 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 5015/6 A 60 flap brushes corundum 50x15 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing - 44506066 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x15 mm shank dia. 6 mm A60 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x15 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing kpn: F 5015/6 A 60 kpn_dash: kpn_clear: F50156A60 bkpn: PFERD F 5015/6 A 60 bkpn_clear: PFERD F50156A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44506066 sr_ns: PFERD44506066
